coreboot-kgpe-d16/src/southbridge/amd/amd8111/amd8111_ide.c
Stefan Reinauer f1cf1f7c3a Ever wondered where those "setting incorrect section attributes for
rodata.pci_driver" warnings are coming from? We were packing those
structures into a read-only segment, but forgot to mark them const.

Despite its size, this is a fairly trivial patch created by a simple
search/replace

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2891 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-24 09:08:58 +00:00

66 lines
1.6 KiB
C

#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include "amd8111.h"
static void ide_init(struct device *dev)
{
struct southbridge_amd_amd8111_config *conf;
/* Enable ide devices so the linux ide driver will work */
uint16_t word;
uint8_t byte;
conf = dev->chip_info;
word = pci_read_config16(dev, 0x40);
/* Ensure prefetch is disabled */
word &= ~((1 << 15) | (1 << 13));
if (conf->ide1_enable) {
/* Enable secondary ide interface */
word |= (1<<0);
printk_debug("IDE1 ");
}
if (conf->ide0_enable) {
/* Enable primary ide interface */
word |= (1<<1);
printk_debug("IDE0 ");
}
word |= (1<<12);
word |= (1<<14);
pci_write_config16(dev, 0x40, word);
byte = 0x20 ; // Latency: 64-->32
pci_write_config8(dev, 0xd, byte);
word = 0x0f;
pci_write_config16(dev, 0x42, word);
}
static void lpci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
{
pci_write_config32(dev, 0x70,
((device & 0xffff) << 16) | (vendor & 0xffff));
}
static struct pci_operations lops_pci = {
.set_subsystem = lpci_set_subsystem,
};
static struct device_operations ide_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = ide_init,
.scan_bus = 0,
.enable = amd8111_enable,
.ops_pci = &lops_pci
};
static const struct pci_driver ide_driver __pci_driver = {
.ops = &ide_ops,
.vendor = PCI_VENDOR_ID_AMD,
.device = PCI_DEVICE_ID_AMD_8111_IDE,
};