266 lines
6.5 KiB
C
266 lines
6.5 KiB
C
/*
|
|
* This file is part of the libpayload project.
|
|
*
|
|
* Copyright (C) 2008 Advanced Micro Devices, Inc.
|
|
* Copyright (C) 2008 Ulf Jordan <jordan@chalmers.se>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <libpayload-config.h>
|
|
#include <libpayload.h>
|
|
|
|
#define IOBASE lib_sysinfo.ser_ioport
|
|
#define MEMBASE (phys_to_virt(lib_sysinfo.ser_base))
|
|
#define DIVISOR(x) (115200 / x)
|
|
|
|
#ifdef CONFIG_SERIAL_SET_SPEED
|
|
static void serial_io_hardware_init(int port, int speed, int word_bits, int parity, int stop_bits)
|
|
{
|
|
unsigned char reg;
|
|
|
|
/* We will assume 8n1 for now. Does anyone use anything else these days? */
|
|
|
|
/* Disable interrupts. */
|
|
outb(0, port + 0x01);
|
|
|
|
/* Assert RTS and DTR. */
|
|
outb(3, port + 0x04);
|
|
|
|
/* Set the divisor latch. */
|
|
reg = inb(port + 0x03);
|
|
outb(reg | 0x80, port + 0x03);
|
|
|
|
/* Write the divisor. */
|
|
outb(DIVISOR(speed) & 0xFF, port);
|
|
outb(DIVISOR(speed) >> 8 & 0xFF, port + 1);
|
|
|
|
/* Restore the previous value of the divisor. */
|
|
outb(reg & ~0x80, port + 0x03);
|
|
}
|
|
|
|
static void serial_mem_hardware_init(int port, int speed, int word_bits, int parity, int stop_bits)
|
|
{
|
|
unsigned char reg;
|
|
|
|
/* We will assume 8n1 for now. Does anyone use anything else these days? */
|
|
|
|
/* Disable interrupts. */
|
|
writeb(0, MEMBASE + 0x01);
|
|
|
|
/* Assert RTS and DTR. */
|
|
writeb(3, MEMBASE + 0x04);
|
|
|
|
/* Set the divisor latch. */
|
|
reg = readb(MEMBASE + 0x03);
|
|
writeb(reg | 0x80, MEMBASE + 0x03);
|
|
|
|
/* Write the divisor. */
|
|
writeb(DIVISOR(speed) & 0xFF, MEMBASE);
|
|
writeb(DIVISOR(speed) >> 8 & 0xFF, MEMBASE + 1);
|
|
|
|
/* Restore the previous value of the divisor. */
|
|
writeb(reg & ~0x80, MEMBASE + 0x03);
|
|
}
|
|
#endif
|
|
|
|
static struct console_input_driver consin = {
|
|
.havekey = serial_havechar,
|
|
.getchar = serial_getchar
|
|
};
|
|
|
|
static struct console_output_driver consout = {
|
|
.putchar = serial_putchar
|
|
};
|
|
|
|
void serial_init(void)
|
|
{
|
|
pcidev_t oxpcie_dev;
|
|
if (pci_find_device(0x1415, 0xc158, &oxpcie_dev)) {
|
|
lib_sysinfo.ser_base = pci_read_resource(oxpcie_dev, 0) + 0x1000;
|
|
} else {
|
|
lib_sysinfo.ser_base = 0;
|
|
}
|
|
|
|
#ifdef CONFIG_SERIAL_SET_SPEED
|
|
if (lib_sysinfo.ser_base)
|
|
serial_mem_hardware_init(IOBASE, CONFIG_SERIAL_BAUD_RATE, 8, 0, 1);
|
|
else
|
|
serial_io_hardware_init(IOBASE, CONFIG_SERIAL_BAUD_RATE, 8, 0, 1);
|
|
#endif
|
|
console_add_input_driver(&consin);
|
|
console_add_output_driver(&consout);
|
|
}
|
|
|
|
static void serial_io_putchar(unsigned int c)
|
|
{
|
|
c &= 0xff;
|
|
while ((inb(IOBASE + 0x05) & 0x20) == 0) ;
|
|
outb(c, IOBASE);
|
|
}
|
|
|
|
static int serial_io_havechar(void)
|
|
{
|
|
return inb(IOBASE + 0x05) & 0x01;
|
|
}
|
|
|
|
static int serial_io_getchar(void)
|
|
{
|
|
while (!serial_io_havechar()) ;
|
|
return (int)inb(IOBASE);
|
|
}
|
|
|
|
static void serial_mem_putchar(unsigned int c)
|
|
{
|
|
c &= 0xff;
|
|
while ((readb(MEMBASE + 0x05) & 0x20) == 0) ;
|
|
writeb(c, MEMBASE);
|
|
}
|
|
|
|
static int serial_mem_havechar(void)
|
|
{
|
|
return readb(MEMBASE + 0x05) & 0x01;
|
|
}
|
|
|
|
static int serial_mem_getchar(void)
|
|
{
|
|
while (!serial_mem_havechar()) ;
|
|
return (int)readb(MEMBASE);
|
|
}
|
|
|
|
|
|
void serial_putchar(unsigned int c)
|
|
{
|
|
if (lib_sysinfo.ser_base)
|
|
serial_mem_putchar(c);
|
|
else
|
|
serial_io_putchar(c);
|
|
}
|
|
|
|
int serial_havechar(void)
|
|
{
|
|
if (lib_sysinfo.ser_base)
|
|
return serial_mem_havechar();
|
|
else
|
|
return serial_io_havechar();
|
|
}
|
|
|
|
int serial_getchar(void)
|
|
{
|
|
if (lib_sysinfo.ser_base)
|
|
return serial_mem_getchar();
|
|
else
|
|
return serial_io_getchar();
|
|
}
|
|
|
|
/* These are thinly veiled vt100 functions used by curses */
|
|
|
|
#define VT100_CLEAR "\e[H\e[J"
|
|
/* These defines will fail if you use bold and reverse at the same time.
|
|
* Switching off one of them will switch off both. tinycurses knows about
|
|
* this and does the right thing.
|
|
*/
|
|
#define VT100_SBOLD "\e[1m"
|
|
#define VT100_EBOLD "\e[m"
|
|
#define VT100_SREVERSE "\e[7m"
|
|
#define VT100_EREVERSE "\e[m"
|
|
#define VT100_CURSOR_ADDR "\e[%d;%dH"
|
|
#define VT100_CURSOR_ON "\e[?25l"
|
|
#define VT100_CURSOR_OFF "\e[?25h"
|
|
/* The following smacs/rmacs are actually for xterm; a real vt100 has
|
|
enacs=\E(B\E)0, smacs=^N, rmacs=^O. */
|
|
#define VT100_SMACS "\e(0"
|
|
#define VT100_RMACS "\e(B"
|
|
/* A vt100 doesn't do color, setaf/setab below are from xterm-color. */
|
|
#define VT100_SET_COLOR "\e[3%d;4%dm"
|
|
|
|
static void serial_putcmd(const char *str)
|
|
{
|
|
while(*str)
|
|
serial_putchar(*(str++));
|
|
}
|
|
|
|
void serial_clear(void)
|
|
{
|
|
serial_putcmd(VT100_CLEAR);
|
|
}
|
|
|
|
void serial_start_bold(void)
|
|
{
|
|
serial_putcmd(VT100_SBOLD);
|
|
}
|
|
|
|
void serial_end_bold(void)
|
|
{
|
|
serial_putcmd(VT100_EBOLD);
|
|
}
|
|
|
|
void serial_start_reverse(void)
|
|
{
|
|
serial_putcmd(VT100_SREVERSE);
|
|
}
|
|
|
|
void serial_end_reverse(void)
|
|
{
|
|
serial_putcmd(VT100_EREVERSE);
|
|
}
|
|
|
|
void serial_start_altcharset(void)
|
|
{
|
|
serial_putcmd(VT100_SMACS);
|
|
}
|
|
|
|
void serial_end_altcharset(void)
|
|
{
|
|
serial_putcmd(VT100_RMACS);
|
|
}
|
|
|
|
/**
|
|
* Set the foreground and background colors on the serial console.
|
|
*
|
|
* @param fg Foreground color number.
|
|
* @param bg Background color number.
|
|
*/
|
|
void serial_set_color(short fg, short bg)
|
|
{
|
|
char buffer[32];
|
|
snprintf(buffer, sizeof(buffer), VT100_SET_COLOR, fg, bg);
|
|
serial_putcmd(buffer);
|
|
}
|
|
|
|
void serial_set_cursor(int y, int x)
|
|
{
|
|
char buffer[32];
|
|
snprintf(buffer, sizeof(buffer), VT100_CURSOR_ADDR, y + 1, x + 1);
|
|
serial_putcmd(buffer);
|
|
}
|
|
|
|
void serial_cursor_enable(int state)
|
|
{
|
|
if (state)
|
|
serial_putcmd(VT100_CURSOR_ON);
|
|
else
|
|
serial_putcmd(VT100_CURSOR_OFF);
|
|
}
|