0f61a4fc98
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4788 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
186 lines
6.3 KiB
Text
186 lines
6.3 KiB
Text
##
|
|
## This file is part of the coreboot project.
|
|
##
|
|
## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
|
|
##
|
|
## This program is free software; you can redistribute it and/or modify
|
|
## it under the terms of the GNU General Public License as published by
|
|
## the Free Software Foundation; either version 2 of the License, or
|
|
## (at your option) any later version.
|
|
##
|
|
## This program is distributed in the hope that it will be useful,
|
|
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
## GNU General Public License for more details.
|
|
##
|
|
## You should have received a copy of the GNU General Public License
|
|
## along with this program; if not, write to the Free Software
|
|
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
##
|
|
|
|
uses CONFIG_GENERATE_MP_TABLE
|
|
uses CONFIG_GENERATE_PIRQ_TABLE
|
|
uses CONFIG_USE_FALLBACK_IMAGE
|
|
uses CONFIG_USE_FAILOVER_IMAGE
|
|
uses CONFIG_HAVE_FALLBACK_BOOT
|
|
uses CONFIG_HAVE_FAILOVER_BOOT
|
|
uses CONFIG_HAVE_HARD_RESET
|
|
uses CONFIG_IRQ_SLOT_COUNT
|
|
uses CONFIG_HAVE_OPTION_TABLE
|
|
uses CONFIG_MAX_CPUS
|
|
uses CONFIG_MAX_PHYSICAL_CPUS
|
|
uses CONFIG_LOGICAL_CPUS
|
|
uses CONFIG_IOAPIC
|
|
uses CONFIG_SMP
|
|
uses CONFIG_FALLBACK_SIZE
|
|
uses CONFIG_FAILOVER_SIZE
|
|
uses CONFIG_ROM_SIZE
|
|
uses CONFIG_ROM_SECTION_SIZE
|
|
uses CONFIG_ROM_IMAGE_SIZE
|
|
uses CONFIG_ROM_SECTION_SIZE
|
|
uses CONFIG_ROM_SECTION_OFFSET
|
|
uses CONFIG_ROM_PAYLOAD
|
|
uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
|
|
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
|
|
uses CONFIG_PRECOMPRESSED_PAYLOAD
|
|
uses CONFIG_ROMBASE
|
|
uses CONFIG_XIP_ROM_SIZE
|
|
uses CONFIG_XIP_ROM_BASE
|
|
uses CONFIG_STACK_SIZE
|
|
uses CONFIG_HEAP_SIZE
|
|
uses CONFIG_USE_OPTION_TABLE
|
|
uses CONFIG_LB_CKS_RANGE_START
|
|
uses CONFIG_LB_CKS_RANGE_END
|
|
uses CONFIG_LB_CKS_LOC
|
|
uses CONFIG_MAINBOARD_PART_NUMBER
|
|
uses CONFIG_MAINBOARD_VENDOR
|
|
uses CONFIG_MAINBOARD
|
|
uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
|
|
uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
|
|
uses COREBOOT_EXTRA_VERSION
|
|
uses CONFIG_RAMBASE
|
|
uses CONFIG_TTYS0_BAUD
|
|
uses CONFIG_TTYS0_BASE
|
|
uses CONFIG_TTYS0_LCS
|
|
uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
|
|
uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
|
|
uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
|
|
uses CONFIG_CONSOLE_SERIAL8250
|
|
uses CONFIG_HAVE_INIT_TIMER # ?
|
|
uses CONFIG_CROSS_COMPILE
|
|
uses CC
|
|
uses HOSTCC
|
|
uses CONFIG_OBJCOPY
|
|
uses CONFIG_CONSOLE_VGA
|
|
uses CONFIG_PCI_ROM_RUN
|
|
uses CONFIG_USBDEBUG_DIRECT
|
|
uses CONFIG_HW_MEM_HOLE_SIZEK
|
|
uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC
|
|
uses CONFIG_K8_HT_FREQ_1G_SUPPORT
|
|
uses CONFIG_HT_CHAIN_UNITID_BASE
|
|
uses CONFIG_HT_CHAIN_END_UNITID_BASE
|
|
uses CONFIG_SB_HT_CHAIN_ON_BUS0
|
|
uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
|
|
uses CONFIG_USE_DCACHE_RAM
|
|
uses CONFIG_DCACHE_RAM_BASE
|
|
uses CONFIG_DCACHE_RAM_SIZE
|
|
uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
|
|
uses CONFIG_USE_INIT
|
|
uses CONFIG_SERIAL_CPU_INIT
|
|
uses CONFIG_ENABLE_APIC_EXT_ID
|
|
uses CONFIG_APIC_ID_OFFSET
|
|
uses CONFIG_LIFT_BSP_APIC_ID
|
|
uses CONFIG_PCI_64BIT_PREF_MEM
|
|
uses CONFIG_RAMTOP
|
|
uses CONFIG_AP_CODE_IN_CAR
|
|
uses CONFIG_MEM_TRAIN_SEQ
|
|
uses CONFIG_WAIT_BEFORE_CPUS_INIT
|
|
uses CONFIG_USE_PRINTK_IN_CAR
|
|
|
|
default CONFIG_ROM_SIZE = 512 * 1024
|
|
default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
|
|
default CONFIG_FAILOVER_SIZE = 4 * 1024
|
|
default CONFIG_RAMTOP = 2048*1024 # 1MB more for pgtbl.
|
|
default CONFIG_HAVE_FALLBACK_BOOT = 1
|
|
default CONFIG_HAVE_FAILOVER_BOOT = 1
|
|
default CONFIG_HAVE_HARD_RESET = 1
|
|
default CONFIG_GENERATE_PIRQ_TABLE = 1
|
|
default CONFIG_IRQ_SLOT_COUNT = 11 # TODO: Check if correct.
|
|
default CONFIG_GENERATE_MP_TABLE = 1 # TODO: Check if correct.
|
|
default CONFIG_HAVE_OPTION_TABLE = 1
|
|
default CONFIG_SMP = 1
|
|
default CONFIG_MAX_CPUS = 2
|
|
default CONFIG_MAX_PHYSICAL_CPUS = 1
|
|
default CONFIG_LOGICAL_CPUS = 1
|
|
# default CONFIG_SERIAL_CPU_INIT = 0
|
|
default CONFIG_ENABLE_APIC_EXT_ID = 0
|
|
default CONFIG_APIC_ID_OFFSET = 0x10
|
|
default CONFIG_LIFT_BSP_APIC_ID = 1
|
|
|
|
# Move the default coreboot CMOS range off of AMD RTC registers.
|
|
default CONFIG_LB_CKS_RANGE_START = 49
|
|
default CONFIG_LB_CKS_RANGE_END = 122
|
|
default CONFIG_LB_CKS_LOC = 123
|
|
|
|
# Memory hole size. 0 means disable, others will enable the hole. In that
|
|
# case, if it is smaller than mmio_basek, it will use mmio_basek instead.
|
|
# default CONFIG_HW_MEM_HOLE_SIZEK = 0x200000 # 2GB
|
|
default CONFIG_HW_MEM_HOLE_SIZEK = 0x100000 # 1GB
|
|
# default CONFIG_HW_MEM_HOLE_SIZEK = 0x80000 # 512MB
|
|
|
|
# Make auto increase hole size to avoid hole_startk equal to basek so as
|
|
# to make some kernel happy.
|
|
# default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC = 1
|
|
|
|
# Opteron K8 1G HT support.
|
|
default CONFIG_K8_HT_FREQ_1G_SUPPORT = 1
|
|
|
|
# HT Unit ID offset, default is 1, the typical one, 0 means only one HT device.
|
|
default CONFIG_HT_CHAIN_UNITID_BASE = 0
|
|
|
|
# Real SB Unit ID, default is 0x20, mean don't touch it at last.
|
|
# default CONFIG_HT_CHAIN_END_UNITID_BASE = 0x6
|
|
|
|
# Make the SB HT chain on bus 0, default is not (0).
|
|
default CONFIG_SB_HT_CHAIN_ON_BUS0 = 2
|
|
|
|
# Only offset for SB chain? Default is yes (1).
|
|
default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0
|
|
|
|
# Allow capable device use that above 4GB.
|
|
# default CONFIG_PCI_64BIT_PREF_MEM = 1
|
|
|
|
default CONFIG_CONSOLE_VGA = 1 # Needed for VGA.
|
|
default CONFIG_PCI_ROM_RUN = 1 # Needed for VGA.
|
|
default CONFIG_USBDEBUG_DIRECT = 0
|
|
default CONFIG_USE_DCACHE_RAM = 1
|
|
default CONFIG_DCACHE_RAM_BASE = 0xc8000
|
|
default CONFIG_DCACHE_RAM_SIZE = 0x08000
|
|
default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x01000
|
|
default CONFIG_USE_INIT = 0
|
|
default CONFIG_AP_CODE_IN_CAR = 0
|
|
default CONFIG_MEM_TRAIN_SEQ = 2
|
|
default CONFIG_WAIT_BEFORE_CPUS_INIT = 0
|
|
default CONFIG_IOAPIC = 1
|
|
default CONFIG_MAINBOARD_PART_NUMBER = "K9N Neo (MS-7260)"
|
|
default CONFIG_MAINBOARD_VENDOR = "MSI"
|
|
default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1462
|
|
default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID = 0x7260
|
|
default CONFIG_ROM_IMAGE_SIZE = 65536 - CONFIG_FAILOVER_SIZE
|
|
default CONFIG_STACK_SIZE = 0x2000
|
|
default CONFIG_HEAP_SIZE = 0x8000
|
|
default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE)
|
|
default CONFIG_RAMBASE = 0x00100000
|
|
default CONFIG_ROM_PAYLOAD = 1
|
|
default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
|
|
default HOSTCC = "gcc"
|
|
default CONFIG_USE_PRINTK_IN_CAR = 1
|
|
default CONFIG_CONSOLE_SERIAL8250 = 1
|
|
default CONFIG_TTYS0_BAUD = 115200
|
|
default CONFIG_TTYS0_BASE = 0x3f8
|
|
default CONFIG_TTYS0_LCS = 0x3
|
|
default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
|
|
default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
|
|
default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL = "MAINBOARD_POWER_ON"
|
|
|
|
end
|