12c0542e6f
When performing an in-band reset the host controller and the peripheral can have mismatched IO configs. i.e., The eSPI peripheral can be in IO-4 mode while, the eSPI host will be in IO-1. This results in the peripheral getting invalid packets and thus not responding. This causes the NO_RESPONSE status bit to be set and cause eSPI init to fail. If the peripheral is alerting when we perform an in-band reset, there is a race condition in espi_send_command. 1) espi_send_command clears the interrupt status. 2) eSPI host controller hardware notices the alert and sends a GET_STATUS. 3) espi_send_command writes the in-band reset command. 4) eSPI hardware enqueues the in-band reset until GET_STATUS is complete. 5) GET_STATUS fails with NO_RESPONSE and sets the interrupt status. 6) eSPI hardware performs in-band reset. 7) espi_send_command checks the status and sees a NO_RESPONSE bit. As a workaround we allow the NO_RESPONSE status code when we perform an in-band reset. BUG=b:186135022 TEST=suspend_stress_test and S5->S0 tests on guybrush and zork. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I71271377f20eaf29032214be98794e1645d9b70a Reviewed-on: https://review.coreboot.org/c/coreboot/+/54070 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Rob Barnes <robbarnes@google.com> |
||
|---|---|---|
| 3rdparty | ||
| configs | ||
| Documentation | ||
| LICENSES | ||
| payloads | ||
| src | ||
| tests | ||
| util | ||
| .checkpatch.conf | ||
| .clang-format | ||
| .editorconfig | ||
| .gitignore | ||
| .gitmodules | ||
| .gitreview | ||
| AUTHORS | ||
| COPYING | ||
| gnat.adc | ||
| MAINTAINERS | ||
| Makefile | ||
| Makefile.inc | ||
| README.md | ||
| toolchain.inc | ||
coreboot README
coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.
With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.
coreboot was formerly known as LinuxBIOS.
Payloads
After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.
See https://www.coreboot.org/Payloads for a list of supported payloads.
Supported Hardware
coreboot supports a wide range of chipsets, devices, and mainboards.
For details please consult:
Build Requirements
- make
- gcc / g++
Because Linux distribution compilers tend to use lots of patches. coreboot
does lots of "unusual" things in its build system, some of which break due
to those patches, sometimes by gcc aborting, sometimes - and that's worse -
by generating broken object code.
Two options: use our toolchain (eg. make crosstools-i386) or enable the
ANY_TOOLCHAINKconfig option if you're feeling lucky (no support in this case). - iasl (for targets with ACPI support)
- pkg-config
- libssl-dev (openssl)
Optional:
- doxygen (for generating/viewing documentation)
- gdb (for better debugging facilities on some targets)
- ncurses (for
make menuconfigandmake nconfig) - flex and bison (for regenerating parsers)
Building coreboot
Please consult https://www.coreboot.org/Build_HOWTO for details.
Testing coreboot Without Modifying Your Hardware
If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.
Please see https://www.coreboot.org/QEMU for details.
Website and Mailing List
Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:
You can contact us directly on the coreboot mailing list:
https://www.coreboot.org/Mailinglist
Copyright and License
The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.
coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.
This makes the resulting coreboot images licensed under the GPL, version 2.