GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1,854 Commits 1 Branch 29 Tags 224 MiB
C 90.7%
ASL 5.1%
Makefile 1.1%
Assembly 0.9%
Pawn 0.6%
Other 1.5%
Go to file
Yinghai Lu 18c70d7222 More range for HT_CHAIN_UNITID_BASE and HT_CHAIN_END_UNITID_BASE. 
For example: in C51/MCP55 or C51/MCP51

Will allow
1. C51 at 0x10 to 0x14, and MCP at 0 to 4
2. C51 at 1 to 4, and MCP at 7 to 0x0a

The reason is c51/mcp51/mcp55 reported unitid is 0x0f (far beyond it
needed), and will prevent us from putting them on bus 0.

Typical values for c51/mcp55 or c51/mcp51:
HT_CHAIN_UNITID_BASE = 0x10 # for C51
HT_CHAIN_END_UNITID_BASE = 0 # for mcp

If only have mcp with c51, 
HT_CHAIN_UNITID_BASE = 0 # for MCP
#HT_CHAIN_END_UNITID_BASE = 0 # default value 0x20

Signed-off-by: Yinghai Lu <yinghai.lu@amd.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2776 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
 		2007-09-14 14:58:33 +00:00
documentation Document POST codes emitted by LinuxBIOSv2. 2007-03-03 15:01:29 +00:00
src More range for HT_CHAIN_UNITID_BASE and HT_CHAIN_END_UNITID_BASE. 2007-09-14 14:58:33 +00:00
targets Add initial support for the Intel 810 based board MSI MS-6178. 2007-09-12 22:11:33 +00:00
util Change out/in combinations to pci_read/write_byte in 2007-09-11 15:58:18 +00:00
COPYING update license template. 2006-08-12 22:03:36 +00:00
NEWS hurry hurry before we might start 3.0 ;-) 2006-09-08 16:34:51 +00:00
README Add a note that the resulting LinuxBIOS images are licensed under the 2007-02-27 22:21:59 +00:00

README 

-------------------------------------------------------------------------------
LinuxBIOS README
-------------------------------------------------------------------------------

LinuxBIOS is a Free Software project aimed at replacing the proprietary
BIOS you can find in most of today's computers.

It performs just a little bit of hardware initialization and then executes
one of many possible payloads, e.g. a Linux kernel.


Payloads
--------

After the basic initialization of the hardware has been performed, any
desired "payload" can be started by LinuxBIOS. Examples include:

 * A Linux kernel
 * FILO (a simple bootloader with filesystem support)
 * GRUB2 (a free bootloader; support is in development)
 * OpenBIOS (a free IEEE1275-1994 Open Firmware implementation)
 * Open Firmware (a free IEEE1275-1994 Open Firmware implementation)
 * SmartFirmware (a free IEEE1275-1994 Open Firmware implementation)
 * GNUFI (a free, UEFI-compatible firmware)
 * Etherboot (for network booting and booting from raw IDE or FILO)
 * ADLO (for booting Windows 2000 or OpenBSD)
 * Plan 9 (a distributed operating system)
 * memtest86 (for testing your RAM)


Supported Hardware
------------------

LinuxBIOS supports a wide range of chipsets, devices, and mainboards.

For details please consult:

 * http://www.linuxbios.org/Supported_Motherboards
 * http://www.linuxbios.org/Supported_Chipsets_and_Devices


Website and Mailing List
------------------------

Further details on the project, a FAQ, many HOWTOs, news, development
guidelines and more can be found on the LinuxBIOS website:

  http://www.linuxbios.org

You can contact us directly on the LinuxBIOS mailing list:

  http://www.linuxbios.org/Mailinglist


Copyright and License
---------------------

The copyright on LinuxBIOS is owned by quite a large number of individual
developers and companies. Please check the individual source files for details.

LinuxBIOS is licensed under the terms of the GNU General Public License (GPL).
Some files are licensed under the "GPL (version 2, or any later version)",
and some files (mostly those derived from the Linux kernel) are licensed under
the "GPL, version 2". For some parts, which were derived from other projects,
other (GPL-compatible) licenses may apply. Please check the individual
source files for details.

This makes the resulting LinuxBIOS images licensed under the GPL, version 2.