coreboot-kgpe-d16/src/mainboard/kontron/986lcd-m/mainboard.c

/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2007-2009 coresystems GmbH
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; version 2 of
 * the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
 * MA 02110-1301 USA
 */

#include <types.h>
#include <device/device.h>
#include <console/console.h>
#include <boot/tables.h>
#include <pc80/mc146818rtc.h>
#include <arch/io.h>
#include "chip.h"

int add_northbridge_resources(struct lb_memory *mem);

int add_mainboard_resources(struct lb_memory *mem)
{
	return add_northbridge_resources(mem);
}

/* Hardware Monitor */

static u16 hwm_base = 0xa00;

static void hwm_write(u8 reg, u8 value)
{
	outb(reg, hwm_base + 0x05);
	outb(value, hwm_base + 0x06);
}

static void hwm_bank(u8 bank)
{
	hwm_write(0x4e, bank);
}

#define FAN_CRUISE_CONTROL_DISABLED	0
#define FAN_CRUISE_CONTROL_SPEED	1
#define FAN_CRUISE_CONTROL_THERMAL	2

#define FAN_SPEED_5625	0
//#define FAN_TEMPERATURE_30DEGC	0

struct fan_speed {
	u8 fan_in;
	u16 fan_speed;
};

// FANIN Target Speed Register 
// FANIN = 337500 / RPM
struct fan_speed fan_speeds[] = {
	{ 0x3c, 5625 }, { 0x41, 5192 }, { 0x47, 4753 }, { 0x4e, 4326 },
	{ 0x56, 3924 }, { 0x5f, 3552 }, { 0x69, 3214 }, { 0x74, 2909 },
	{ 0x80, 2636 }, { 0x8d, 2393 }, { 0x9b, 2177 }, { 0xaa, 1985 },
	{ 0xba, 1814 }, { 0xcb, 1662 }, { 0xdd, 1527 }, { 0xf0, 1406 }
};

struct temperature {
	u8 deg_celsius;
	u8 deg_fahrenheit;
};

struct temperature temperatures[] = {
	{ 30,  86 }, { 33,  91 }, { 36,  96 }, { 39, 102 }, 
	{ 42, 107 }, { 45, 113 }, { 48, 118 }, { 51, 123 },
	{ 54, 129 }, { 57, 134 }, { 60, 140 }, { 63, 145 },
	{ 66, 150 }, { 69, 156 }, { 72, 161 }, { 75, 167 }
};

static void hwm_setup(void)
{
	int cpufan_control = 0, sysfan_control = 0;
	int cpufan_speed = 0, sysfan_speed = 0;
	int cpufan_temperature = 0, sysfan_temperature = 0;

	if (get_option(&cpufan_control, "cpufan_cruise_control") < 0)
		cpufan_control = FAN_CRUISE_CONTROL_DISABLED;
	if (get_option(&cpufan_speed, "cpufan_speed") < 0)
		cpufan_speed = FAN_SPEED_5625;
	//if (get_option(&cpufan_temperature, "cpufan_temperature") < 0)
	//	cpufan_temperature = FAN_TEMPERATURE_30DEGC;

	if (get_option(&sysfan_control, "sysfan_cruise_control") < 0)
		sysfan_control = FAN_CRUISE_CONTROL_DISABLED;
	if (get_option(&sysfan_speed, "sysfan_speed") < 0)
		sysfan_speed = FAN_SPEED_5625;
	//if (get_option(&sysfan_temperature, "sysfan_temperature") < 0)
	//	sysfan_temperature = FAN_TEMPERATURE_30DEGC;
	
	// hwm_write(0x31, 0x20); // AVCC high limit
	// hwm_write(0x34, 0x06); // VIN2 low limit

	hwm_bank(0);
	hwm_write(0x59, 0x20); // Diode Selection
	hwm_write(0x5d, 0x0f); // All Sensors Diode, not Thermistor

	hwm_bank(4);
	hwm_write(0x54, 0xf1); // SYSTIN temperature offset
	hwm_write(0x55, 0x19); // CPUTIN temperature offset
	hwm_write(0x56, 0xfc); // AUXTIN temperature offset

	hwm_bank(0x80); // Default

	u8 fan_config = 0;
	// 00 FANOUT is Manual Mode
	// 01 FANOUT is Thermal Cruise Mode
	// 10 FANOUT is Fan Speed Cruise Mode
	switch (cpufan_control) {
	case FAN_CRUISE_CONTROL_SPEED:	 fan_config |= (2 << 4); break;
	case FAN_CRUISE_CONTROL_THERMAL: fan_config |= (1 << 4); break;
	}
	switch (sysfan_control) {
	case FAN_CRUISE_CONTROL_SPEED:	 fan_config |= (2 << 2); break;
	case FAN_CRUISE_CONTROL_THERMAL: fan_config |= (1 << 2); break;
	}
	// This register must be written first
	hwm_write(0x04, fan_config);

	switch (cpufan_control) {
	case FAN_CRUISE_CONTROL_SPEED:
		printk_debug("Fan Cruise Control setting CPU fan to %d RPM\n",
				fan_speeds[cpufan_speed].fan_speed);
		hwm_write(0x06, fan_speeds[cpufan_speed].fan_in);  // CPUFANIN target speed
		break;
	case FAN_CRUISE_CONTROL_THERMAL:
		printk_debug("Fan Cruise Control setting CPU fan to activation at %d deg C/%d deg F\n",
				temperatures[cpufan_temperature].deg_celsius,
				temperatures[cpufan_temperature].deg_fahrenheit);
		hwm_write(0x06, temperatures[cpufan_temperature].deg_celsius);  // CPUFANIN target temperature
		break;
	}

	switch (sysfan_control) {
	case FAN_CRUISE_CONTROL_SPEED:
		printk_debug("Fan Cruise Control setting system fan to %d RPM\n",
				fan_speeds[sysfan_speed].fan_speed);
		hwm_write(0x05, fan_speeds[sysfan_speed].fan_in);  // SYSFANIN target speed
		break;
	case FAN_CRUISE_CONTROL_THERMAL:
		printk_debug("Fan Cruise Control setting system fan to activation at %d deg C/%d deg F\n",
				temperatures[sysfan_temperature].deg_celsius,
				temperatures[sysfan_temperature].deg_fahrenheit);
		hwm_write(0x05, temperatures[sysfan_temperature].deg_celsius); // SYSFANIN target temperature
		break;
	}

	hwm_write(0x0e, 0x02); // Fan Output Step Down Time
	hwm_write(0x0f, 0x02); // Fan Output Step Up Time

	hwm_write(0x47, 0xaf); // FAN divisor register
	hwm_write(0x4b, 0x84); // AUXFANIN speed divisor

	hwm_write(0x40, 0x01); // Init, but no SMI#
}

/* Audio Setup */

extern u32 * cim_verb_data;
extern u32 cim_verb_data_size;

static void verb_setup(void)
{
	// Default VERB is fine on this mainboard.
	cim_verb_data = NULL;
	cim_verb_data_size = 0;
}

// mainboard_enable is executed as first thing after 
// enumerate_buses().
static void mainboard_enable(device_t dev) 
{
	verb_setup();
	hwm_setup();
}

struct chip_operations mainboard_ops = {
	CHIP_NAME("Kontron 986LCD-M Mainboard")
	.enable_dev = mainboard_enable,
};