281 lines
7.5 KiB
C
281 lines
7.5 KiB
C
/*
|
|
* This file is part of the flashrom project.
|
|
*
|
|
* Copyright (C) 2007, 2008 Carl-Daniel Hailfinger
|
|
* Copyright (C) 2008 Ronald Hoogenboom <ronald@zonnet.nl>
|
|
* Copyright (C) 2008 coresystems GmbH
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
/*
|
|
* Contains the ITE IT87* SPI specific routines
|
|
*/
|
|
|
|
#include <stdio.h>
|
|
#include <pci/pci.h>
|
|
#include <stdint.h>
|
|
#include <string.h>
|
|
#include "flash.h"
|
|
#include "spi.h"
|
|
|
|
#define ITE_SUPERIO_PORT1 0x2e
|
|
#define ITE_SUPERIO_PORT2 0x4e
|
|
|
|
uint16_t it8716f_flashport = 0;
|
|
/* use fast 33MHz SPI (<>0) or slow 16MHz (0) */
|
|
int fast_spi = 1;
|
|
|
|
/* Generic Super I/O helper functions */
|
|
uint8_t regval(uint16_t port, uint8_t reg)
|
|
{
|
|
OUTB(reg, port);
|
|
return INB(port + 1);
|
|
}
|
|
|
|
void regwrite(uint16_t port, uint8_t reg, uint8_t val)
|
|
{
|
|
OUTB(reg, port);
|
|
OUTB(val, port + 1);
|
|
}
|
|
|
|
/* Helper functions for most recent ITE IT87xx Super I/O chips */
|
|
#define CHIP_ID_BYTE1_REG 0x20
|
|
#define CHIP_ID_BYTE2_REG 0x21
|
|
static void enter_conf_mode_ite(uint16_t port)
|
|
{
|
|
OUTB(0x87, port);
|
|
OUTB(0x01, port);
|
|
OUTB(0x55, port);
|
|
if (port == ITE_SUPERIO_PORT1)
|
|
OUTB(0x55, port);
|
|
else
|
|
OUTB(0xaa, port);
|
|
}
|
|
|
|
static void exit_conf_mode_ite(uint16_t port)
|
|
{
|
|
regwrite(port, 0x02, 0x02);
|
|
}
|
|
|
|
static uint16_t find_ite_spi_flash_port(uint16_t port)
|
|
{
|
|
uint8_t tmp = 0;
|
|
uint16_t id, flashport = 0;
|
|
|
|
enter_conf_mode_ite(port);
|
|
|
|
id = regval(port, CHIP_ID_BYTE1_REG) << 8;
|
|
id |= regval(port, CHIP_ID_BYTE2_REG);
|
|
|
|
/* TODO: Handle more IT87xx if they support flash translation */
|
|
if (0x8716 == id || 0x8718 == id) {
|
|
/* NOLDN, reg 0x24, mask out lowest bit (suspend) */
|
|
tmp = regval(port, 0x24) & 0xFE;
|
|
printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
|
|
0xFFFE0000, 0xFFFFFFFF, (tmp & 1 << 1) ? "en" : "dis");
|
|
printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
|
|
0x000E0000, 0x000FFFFF, (tmp & 1 << 1) ? "en" : "dis");
|
|
printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
|
|
0xFFEE0000, 0xFFEFFFFF, (tmp & 1 << 2) ? "en" : "dis");
|
|
printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
|
|
0xFFF80000, 0xFFFEFFFF, (tmp & 1 << 3) ? "en" : "dis");
|
|
printf("LPC write to serial flash %sabled\n",
|
|
(tmp & 1 << 4) ? "en" : "dis");
|
|
/* If any serial flash segment is enabled, enable writing. */
|
|
if ((tmp & 0xe) && (!(tmp & 1 << 4))) {
|
|
printf("Enabling LPC write to serial flash\n");
|
|
tmp |= 1 << 4;
|
|
regwrite(port, 0x24, tmp);
|
|
}
|
|
printf("serial flash pin %i\n", (tmp & 1 << 5) ? 87 : 29);
|
|
/* LDN 0x7, reg 0x64/0x65 */
|
|
regwrite(port, 0x07, 0x7);
|
|
flashport = regval(port, 0x64) << 8;
|
|
flashport |= regval(port, 0x65);
|
|
}
|
|
exit_conf_mode_ite(port);
|
|
return flashport;
|
|
}
|
|
|
|
int it87xx_probe_spi_flash(const char *name)
|
|
{
|
|
it8716f_flashport = find_ite_spi_flash_port(ITE_SUPERIO_PORT1);
|
|
|
|
if (!it8716f_flashport)
|
|
it8716f_flashport = find_ite_spi_flash_port(ITE_SUPERIO_PORT2);
|
|
|
|
if (it8716f_flashport)
|
|
flashbus = BUS_TYPE_IT87XX_SPI;
|
|
|
|
return (!it8716f_flashport);
|
|
}
|
|
|
|
/*
|
|
* The IT8716F only supports commands with length 1,2,4,5 bytes including
|
|
* command byte and can not read more than 3 bytes from the device.
|
|
*
|
|
* This function expects writearr[0] to be the first byte sent to the device,
|
|
* whereas the IT8716F splits commands internally into address and non-address
|
|
* commands with the address in inverse wire order. That's why the register
|
|
* ordering in case 4 and 5 may seem strange.
|
|
*/
|
|
int it8716f_spi_command(unsigned int writecnt, unsigned int readcnt,
|
|
const unsigned char *writearr, unsigned char *readarr)
|
|
{
|
|
uint8_t busy, writeenc;
|
|
int i;
|
|
|
|
do {
|
|
busy = INB(it8716f_flashport) & 0x80;
|
|
} while (busy);
|
|
if (readcnt > 3) {
|
|
printf("%s called with unsupported readcnt %i.\n",
|
|
__FUNCTION__, readcnt);
|
|
return 1;
|
|
}
|
|
switch (writecnt) {
|
|
case 1:
|
|
OUTB(writearr[0], it8716f_flashport + 1);
|
|
writeenc = 0x0;
|
|
break;
|
|
case 2:
|
|
OUTB(writearr[0], it8716f_flashport + 1);
|
|
OUTB(writearr[1], it8716f_flashport + 7);
|
|
writeenc = 0x1;
|
|
break;
|
|
case 4:
|
|
OUTB(writearr[0], it8716f_flashport + 1);
|
|
OUTB(writearr[1], it8716f_flashport + 4);
|
|
OUTB(writearr[2], it8716f_flashport + 3);
|
|
OUTB(writearr[3], it8716f_flashport + 2);
|
|
writeenc = 0x2;
|
|
break;
|
|
case 5:
|
|
OUTB(writearr[0], it8716f_flashport + 1);
|
|
OUTB(writearr[1], it8716f_flashport + 4);
|
|
OUTB(writearr[2], it8716f_flashport + 3);
|
|
OUTB(writearr[3], it8716f_flashport + 2);
|
|
OUTB(writearr[4], it8716f_flashport + 7);
|
|
writeenc = 0x3;
|
|
break;
|
|
default:
|
|
printf("%s called with unsupported writecnt %i.\n",
|
|
__FUNCTION__, writecnt);
|
|
return 1;
|
|
}
|
|
/*
|
|
* Start IO, 33 or 16 MHz, readcnt input bytes, writecnt output bytes.
|
|
* Note:
|
|
* We can't use writecnt directly, but have to use a strange encoding.
|
|
*/
|
|
OUTB(((0x4 + (fast_spi ? 1 : 0)) << 4)
|
|
| ((readcnt & 0x3) << 2) | (writeenc), it8716f_flashport);
|
|
|
|
if (readcnt > 0) {
|
|
do {
|
|
busy = INB(it8716f_flashport) & 0x80;
|
|
} while (busy);
|
|
|
|
for (i = 0; i < readcnt; i++)
|
|
readarr[i] = INB(it8716f_flashport + 5 + i);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Page size is usually 256 bytes */
|
|
static void it8716f_spi_page_program(int block, uint8_t *buf, uint8_t *bios)
|
|
{
|
|
int i;
|
|
|
|
spi_write_enable();
|
|
OUTB(0x06, it8716f_flashport + 1);
|
|
OUTB(((2 + (fast_spi ? 1 : 0)) << 4), it8716f_flashport);
|
|
for (i = 0; i < 256; i++) {
|
|
bios[256 * block + i] = buf[256 * block + i];
|
|
}
|
|
OUTB(0, it8716f_flashport);
|
|
/* Wait until the Write-In-Progress bit is cleared.
|
|
* This usually takes 1-10 ms, so wait in 1 ms steps.
|
|
*/
|
|
while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
|
|
usleep(1000);
|
|
}
|
|
|
|
/*
|
|
* IT8716F only allows maximum of 512 kb SPI mapped to LPC memory cycles
|
|
* Program chip using firmware cycle byte programming. (SLOW!)
|
|
*/
|
|
int it8716f_over512k_spi_chip_write(struct flashchip *flash, uint8_t *buf)
|
|
{
|
|
int total_size = 1024 * flash->total_size;
|
|
int i;
|
|
|
|
fast_spi = 0;
|
|
|
|
spi_disable_blockprotect();
|
|
for (i = 0; i < total_size; i++) {
|
|
spi_write_enable();
|
|
spi_byte_program(i, buf[i]);
|
|
while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
|
|
myusec_delay(10);
|
|
}
|
|
/* resume normal ops... */
|
|
OUTB(0x20, it8716f_flashport);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* IT8716F only allows maximum of 512 kb SPI mapped to LPC memory cycles
|
|
* Need to read this big flash using firmware cycles 3 byte at a time.
|
|
*/
|
|
int it8716f_spi_chip_read(struct flashchip *flash, uint8_t *buf)
|
|
{
|
|
int total_size = 1024 * flash->total_size;
|
|
int i;
|
|
fast_spi = 0;
|
|
|
|
if (total_size > 512 * 1024) {
|
|
for (i = 0; i < total_size; i += 3) {
|
|
int toread = 3;
|
|
if (total_size - i < toread)
|
|
toread = total_size - i;
|
|
spi_nbyte_read(i, buf + i, toread);
|
|
}
|
|
} else {
|
|
memcpy(buf, (const char *)flash->virtual_memory, total_size);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int it8716f_spi_chip_write(struct flashchip *flash, uint8_t *buf)
|
|
{
|
|
int total_size = 1024 * flash->total_size;
|
|
int i;
|
|
|
|
if (total_size > 512 * 1024) {
|
|
it8716f_over512k_spi_chip_write(flash, buf);
|
|
} else {
|
|
for (i = 0; i < total_size / 256; i++) {
|
|
it8716f_spi_page_program(i, buf,
|
|
(uint8_t *)flash->virtual_memory);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|