coreboot-kgpe-d16/payloads/external/SeaBIOS/Kconfig
Alexandru Gagniuc fdbc1af5e2 Kconfig: Remove EXPERT mode
After much consideration, and many years of an EXPERT mode sitting
almost completely unused, we've seen that it doesn't work for us.
There is no standard on what constitutes EXPERT, and most of
coreboot's options Kconfig are expert-level.

We even joked that not selecting "EXPERT" should prevent coreboot
from compiling:

@echo $(shell whoami) is not permitted to compile coreboot

Change-Id: Ic22dd54a48190b81d711625efb6b9f3078f41778
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11365
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2015-08-30 07:50:47 +00:00

69 lines
2 KiB
Text

if PAYLOAD_SEABIOS
choice
prompt "SeaBIOS version"
default SEABIOS_STABLE
config SEABIOS_STABLE
bool "1.7.5"
help
Stable SeaBIOS version
config SEABIOS_MASTER
bool "master"
help
Newest SeaBIOS version
endchoice
config SEABIOS_PS2_TIMEOUT
prompt "PS/2 keyboard controller initialization timeout (milliseconds)"
default 0
int
help
Some PS/2 keyboard controllers don't respond to commands immediately
after powering on. This specifies how long SeaBIOS will wait for the
keyboard controller to become ready before giving up.
config SEABIOS_THREAD_OPTIONROMS
prompt "Hardware init during option ROM execution"
default n
bool
help
Allow hardware init to run in parallel with optionrom execution.
This can reduce boot time, but can cause some timing
variations during option ROM code execution. It is not
known if all option ROMs will behave properly with this option.
config SEABIOS_MALLOC_UPPERMEMORY
bool
default y
help
Use the "Upper Memory Block" area (0xc0000-0xf0000) for internal
"low memory" allocations. If this is not selected, the memory is
instead allocated from the "9-segment" (0x90000-0xa0000).
This is not typically needed, but may be required on some platforms
to allow USB and SATA buffers to be written correctly by the
hardware. In general, if this is desired, the option will be
set to 'N' by the chipset Kconfig.
config SEABIOS_VGA_COREBOOT
prompt "Include generated option rom that implements legacy VGA BIOS compatibility"
default n
depends on !VGA_BIOS && (MAINBOARD_DO_NATIVE_VGA_INIT || MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG)
bool
help
Coreboot can initialize the GPU of some mainboards.
After initializing the GPU, the information about it can be passed to the payload.
Provide an option rom that implements this legacy VGA BIOS compatibility requirement.
config PAYLOAD_FILE
default "payloads/external/SeaBIOS/seabios/out/bios.bin.elf"
config PAYLOAD_VGABIOS_FILE
string
depends on SEABIOS_VGA_COREBOOT
default "payloads/external/SeaBIOS/seabios/out/vgabios.bin"
endif