dd2bc3f819
Old igd.asl had inconsistent addresses (between _DOD and actual device) and ghost devices. Any of those is enough to make brightness on windows fail and make igd.asl out-of-ACPI-spec. Also old code favoured ridiculous copying of the same thing 6 times per chipset. Leave only hooking up and chipset-specific part in chipset directory. Move NVS handling and ACPI-spec parts to a common file. Change-Id: I556769e5e28b83e7465e3db689e26c8c0ab44757 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7472 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
143 lines
4.1 KiB
Text
143 lines
4.1 KiB
Text
chip northbridge/intel/haswell
|
|
# IGD Displays
|
|
register "gfx.ndid" = "3"
|
|
register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }"
|
|
|
|
# Disable eDP Hotplug
|
|
register "gpu_dp_d_hotplug" = "0x00"
|
|
|
|
# Enable DisplayPort C Hotplug with 6ms pulse
|
|
register "gpu_dp_c_hotplug" = "0x06"
|
|
|
|
# Enable HDMI Hotplug with 6ms pulse
|
|
register "gpu_dp_b_hotplug" = "0x06"
|
|
|
|
device cpu_cluster 0 on
|
|
chip cpu/intel/haswell
|
|
device lapic 0 on end
|
|
# Magic APIC ID to locate this chip
|
|
device lapic 0xACAC off end
|
|
|
|
register "c1_battery" = "2" # ACPI(C1) = MWAIT(C1E)
|
|
register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3)
|
|
register "c3_battery" = "9" # ACPI(C3) = MWAIT(C7S)
|
|
|
|
register "c1_acpower" = "2" # ACPI(C1) = MWAIT(C1E)
|
|
register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3)
|
|
register "c3_acpower" = "9" # ACPI(C3) = MWAIT(C7S)
|
|
end
|
|
end
|
|
|
|
device domain 0 on
|
|
subsystemid 0x1ae0 0xc000 inherit
|
|
device pci 00.0 on end # host bridge
|
|
device pci 02.0 on end # vga controller
|
|
device pci 03.0 on end # mini-hd audio
|
|
|
|
chip southbridge/intel/lynxpoint
|
|
register "pirqa_routing" = "0x8b"
|
|
register "pirqb_routing" = "0x8a"
|
|
register "pirqc_routing" = "0x8b"
|
|
register "pirqd_routing" = "0x8b"
|
|
register "pirqe_routing" = "0x80"
|
|
register "pirqf_routing" = "0x80"
|
|
register "pirqg_routing" = "0x80"
|
|
register "pirqh_routing" = "0x80"
|
|
|
|
# SuperIO range is 0x700-0x73f
|
|
register "gen2_dec" = "0x003c0701"
|
|
|
|
register "alt_gp_smi_en" = "0x0000"
|
|
register "gpe0_en_1" = "0x00000000"
|
|
register "gpe0_en_2" = "0x00000000"
|
|
register "gpe0_en_3" = "0x00000000"
|
|
register "gpe0_en_4" = "0x00000000"
|
|
|
|
register "ide_legacy_combined" = "0x0"
|
|
register "sata_ahci" = "0x1"
|
|
register "sata_port_map" = "0x1"
|
|
register "sata_devslp_disable" = "0x1"
|
|
|
|
register "sio_acpi_mode" = "0"
|
|
register "sio_i2c0_voltage" = "0" # 3.3V
|
|
register "sio_i2c1_voltage" = "0" # 3.3V
|
|
|
|
# Force enable ASPM for PCIe Port 4
|
|
register "pcie_port_force_aspm" = "0x10"
|
|
|
|
# Enable port coalescing
|
|
register "pcie_port_coalesce" = "1"
|
|
|
|
# Disable PCIe CLKOUT 1,5 and CLKOUT_XDP
|
|
register "icc_clock_disable" = "0x01220000"
|
|
|
|
# Route all USB ports to XHCI per default
|
|
register "xhci_default" = "1"
|
|
|
|
device pci 13.0 off end # Smart Sound Audio DSP
|
|
device pci 14.0 on end # USB3 XHCI
|
|
device pci 15.0 off end # Serial I/O DMA
|
|
device pci 15.1 off end # I2C0
|
|
device pci 15.2 off end # I2C1
|
|
device pci 15.3 off end # GSPI0
|
|
device pci 15.4 off end # GSPI1
|
|
device pci 15.5 off end # UART0
|
|
device pci 15.6 off end # UART1
|
|
device pci 16.0 on end # Management Engine Interface 1
|
|
device pci 16.1 off end # Management Engine Interface 2
|
|
device pci 16.2 off end # Management Engine IDE-R
|
|
device pci 16.3 off end # Management Engine KT
|
|
device pci 17.0 off end # SDIO
|
|
device pci 19.0 off end # GbE
|
|
device pci 1b.0 on end # High Definition Audio
|
|
device pci 1c.0 off end # PCIe Port #1
|
|
device pci 1c.1 off end # PCIe Port #2
|
|
device pci 1c.2 on end # PCIe Port #3
|
|
device pci 1c.3 on end # PCIe Port #4
|
|
device pci 1c.4 on end # PCIe Port #5
|
|
device pci 1c.5 off end # PCIe Port #6
|
|
device pci 1d.0 on end # USB2 EHCI
|
|
device pci 1e.0 off end # PCI bridge
|
|
device pci 1f.0 on
|
|
chip superio/ite/it8772f
|
|
# Skip keyboard init
|
|
register "skip_keyboard" = "1"
|
|
# Enable PECI on TMPIN3
|
|
register "peci_tmpin" = "3"
|
|
# Enable FAN2
|
|
register "fan2_enable" = "1"
|
|
|
|
device pnp 2e.0 off end # FDC
|
|
device pnp 2e.1 on # Serial Port 1
|
|
io 0x60 = 0x3f8
|
|
irq 0x70 = 4
|
|
end
|
|
device pnp 2e.4 on # Environment Controller
|
|
io 0x60 = 0x700
|
|
io 0x62 = 0x710
|
|
irq 0x70 = 0x09
|
|
irq 0xf2 = 0x20
|
|
irq 0xf4 = 0x0
|
|
irq 0xfa = 0x12
|
|
end
|
|
device pnp 2e.7 on # GPIO
|
|
io 0x60 = 0x720
|
|
io 0x62 = 0x730
|
|
end
|
|
device pnp 2e.5 on
|
|
io 0x60 = 0x60
|
|
io 0x62 = 0x64
|
|
irq 0x70 = 1
|
|
end # Keyboard
|
|
device pnp 2e.6 on
|
|
irq 0x70 = 12
|
|
end # Mouse
|
|
device pnp 2e.a off end # IR
|
|
end
|
|
end # LPC bridge
|
|
device pci 1f.2 on end # SATA Controller
|
|
device pci 1f.3 on end # SMBus
|
|
device pci 1f.6 on end # Thermal
|
|
end
|
|
end
|
|
end
|