Go to file
Subrata Banik 298b35923d drivers/intel/fsp2_0: Refactor MultiPhaseSiInit API calling method
FspMultiPhaseSiInit API was introduced with FSP 2.2 specification
onwards. EnableMultiPhaseSiliconInit is an arch UPD also introduced
as part of FSP 2.2 specification to allow calling FspMultiPhaseSiInit
API.

However, some platforms adhere to the FSP specification but
don't have arch UPD structure, for example : JSL, TGL and Xeon-SP.

Out of these platforms, TGL supports calling of FspMultiPhaseSiInit
API and considered EnableMultiPhaseSiliconInit as a platform-specific
UPD rather than an arch UPD to allow calling into FspMultiPhaseSiInit
API.

It is important to ensure that the UPD setting and the callback for
MultiPhaseInit are kept in sync, else it could result in broken
behavior e.g. a hang is seen in FSP if EnableMultiPhaseSiliconInit
UPD is set to 1 but the FspMultiPhaseSiInit API call is skipped.

This patch provides an option for users to choose to bypass calling
into MultiPhaseSiInit API and ensures the EnableMultiPhaseSiliconInit
UPD is set to its default state as `disable` so that FSP-S don't
consider MultiPhaseSiInit API is a mandatory entry point prior to
calling other FSP API entry points.

List of changes:
1. Add `FSPS_HAS_ARCH_UPD` Kconfig for SoC to select if
`FSPS_ARCH_UPD` structure is part of `FSPS_UPD` structure.
2. Drop `soc_fsp_multi_phase_init_is_enable()` from JSL and Xeon-SP
SoCs, a SoC override to callout that SoC doesn't support calling
MultiPhase Si Init is no longer required.
3. Add `FSPS_USE_MULTI_PHASE_INIT` Kconfig for SoC to specify if
SoC users want to enable `EnableMultiPhaseSiliconInit` arch UPD (using
`fsp_fill_common_arch_params()`) and execute FspMultiPhaseSiInit() API.
4. Presently selects `FSPS_USE_MULTI_PHASE_INIT` from IA TCSS common
code.
5. Add `fsp_is_multi_phase_init_enabled()` that check applicability of
MultiPhase Si Init prior calling FspMultiPhaseSiInit() API to
honor SoC users' decision.
6. Drop `arch_silicon_init_params()` from SoC as FSP driver (FSP 2.2)
would check the applicability of MultiPhase Si Init prior calling
FspMultiPhaseSiInit() API.

Additionally, selects FSPS_HAS_ARCH_UPD for Alder Lake as Alder Lake
FSPS_UPD structure has `FSPS_ARCH_UPD` structure and drops
`arch_silicon_init_params()` from SoC
`platform_fsp_silicon_init_params_cb()`.

Skip EnableMultiPhaseSiliconInit hardcoding for Tiger Lake and uses
the fsp_is_multi_phase_init_enabled() function to override
EnableMultiPhaseSiliconInit UPD prior calling MultiPhaseSiInit FSP API.

TEST=EnableMultiPhaseSiliconInit UPD is getting set or reset based on
SoC user selects FSPS_USE_MULTI_PHASE_INIT Kconfig.

Change-Id: I019fa8364605f5061d56e2d80b20e1a91857c423
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56382
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-16 14:31:12 +00:00
3rdparty Update vboot submodule to upstream main 2021-09-15 23:58:03 +00:00
Documentation Doc/Intel: Remove out-of-date documentation 2021-09-15 22:43:44 +00:00
LICENSES
configs configs/config.google_meep_cros: don't select ADD_FSP_BINARIES 2021-09-04 18:33:29 +00:00
payloads payloads/external/tianocore: Add build argument for 4G Decode 2021-09-08 07:19:10 +00:00
src drivers/intel/fsp2_0: Refactor MultiPhaseSiInit API calling method 2021-09-16 14:31:12 +00:00
tests tests: Add lib/cbfs-lookup-test test case 2021-09-14 23:35:38 +00:00
util elogtool: add next_available_event_offset function 2021-09-16 13:52:37 +00:00
.checkpatch.conf lint: checkpatch: Only exclude specific src/vendorcode/ subdirectories 2021-04-06 16:04:41 +00:00
.clang-format
.editorconfig
.gitignore .gitignore: Ignore .test/.dependencies globally 2020-10-31 18:21:36 +00:00
.gitmodules .gitmodules: Update intel-microcode submodule to track branch=main 2021-06-09 17:20:50 +00:00
.gitreview
AUTHORS
COPYING
MAINTAINERS MAINTAINERS: Add myself 2021-09-06 19:11:58 +00:00
Makefile util/kconfig: Uprev to Linux 5.13's kconfig 2021-07-13 20:28:14 +00:00
Makefile.inc build system: Deduplicate symbols in objdump 2021-07-23 15:06:56 +00:00
README.md
gnat.adc
toolchain.inc toolchain.inc: copy architecture specific CFLAGS to GCC_ADAFLAGS 2021-07-01 09:43:54 +00:00

README.md

coreboot README

coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.

With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.

coreboot was formerly known as LinuxBIOS.

Payloads

After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.

See https://www.coreboot.org/Payloads for a list of supported payloads.

Supported Hardware

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

Build Requirements

  • make
  • gcc / g++ Because Linux distribution compilers tend to use lots of patches. coreboot does lots of "unusual" things in its build system, some of which break due to those patches, sometimes by gcc aborting, sometimes - and that's worse - by generating broken object code. Two options: use our toolchain (eg. make crosstools-i386) or enable the ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this case).
  • iasl (for targets with ACPI support)
  • pkg-config
  • libssl-dev (openssl)

Optional:

  • doxygen (for generating/viewing documentation)
  • gdb (for better debugging facilities on some targets)
  • ncurses (for make menuconfig and make nconfig)
  • flex and bison (for regenerating parsers)

Building coreboot

Please consult https://www.coreboot.org/Build_HOWTO for details.

Testing coreboot Without Modifying Your Hardware

If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.

Please see https://www.coreboot.org/QEMU for details.

Website and Mailing List

Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:

https://www.coreboot.org

You can contact us directly on the coreboot mailing list:

https://www.coreboot.org/Mailinglist

The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.