Go to file
Timothy Pearson 29dd5da1dc nb/amd/mct_ddr3: Do not constantly reset read data timing registers to 0
During DQS receiver enable cycle training on Family 15h platforms the
read data timing registers were inadvertently set to zero on every
lane training attempt.

Ensure that the read data timing registers are correctly set after
each lane is trained in receiver enable cycle training.  This allows
more than one RDIMM to function on a given DCT channel.

Change-Id: I87d732f0383e9785a73b57e6f48855f3e872f1f9
Tested-On: ASUS KGPE-D16
Tested-With: 1x Opteron 6262HE
Tested-With: 4x Crucial 36KSF1G72PZ-1G6M1 (slots A2 / A1 / B2 / B1)
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14543
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-01 00:50:05 +02:00
3rdparty vboot: Update to current master to support S3 resume signalling 2016-02-29 20:19:06 +01:00
Documentation Documentation: x86 MTRR setup, TempRamExit and MTRR loading 2016-03-21 20:12:35 +01:00
payloads payloads: Add a stable version of Memtest86+ for reproducibility 2016-04-27 19:55:40 +02:00
src nb/amd/mct_ddr3: Do not constantly reset read data timing registers to 0 2016-05-01 00:50:05 +02:00
util board_status/to-wiki: Fix background color of very recent test results 2016-04-26 20:50:07 +02:00
.clang-format
.gitignore romcc: Remove old test infrastructure, rework Makefile 2016-04-14 19:13:07 +02:00
.gitmodules git modules: rename git submodules to avoid hierarchies 2016-02-11 20:55:55 +01:00
.gitreview
COPYING
MAINTAINERS MAINTAINERS: Add maintainer for Pineview & x4x chipsets & boards 2016-04-19 19:25:59 +02:00
Makefile Makefile: Update payload clean targets 2016-03-09 17:01:56 +01:00
Makefile.inc kbuild: Allow drivers to fit src/drivers/[X]/[Y]/ scheme 2016-04-19 18:34:18 +02:00
README
toolchain.inc toolchain.inc: test IASL by version string instead of number 2016-03-04 16:36:25 +01:00

README

-------------------------------------------------------------------------------
coreboot README
-------------------------------------------------------------------------------

coreboot is a Free Software project aimed at replacing the proprietary BIOS
(firmware) found in most computers.  coreboot performs a little bit of
hardware initialization and then executes additional boot logic, called a
payload.

With the separation of hardware initialization and later boot logic,
coreboot can scale from specialized applications that run directly
firmware, run operating systems in flash, load custom
bootloaders, or implement firmware standards, like PC BIOS services or
UEFI. This allows for systems to only include the features necessary
in the target application, reducing the amount of code and flash space
required.

coreboot was formerly known as LinuxBIOS.


Payloads
--------

After the basic initialization of the hardware has been performed, any
desired "payload" can be started by coreboot.

See http://www.coreboot.org/Payloads for a list of supported payloads.


Supported Hardware
------------------

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

 * http://www.coreboot.org/Supported_Motherboards
 * http://www.coreboot.org/Supported_Chipsets_and_Devices


Build Requirements
------------------

 * make
 * gcc / g++
   Because Linux distribution compilers tend to use lots of patches. coreboot
   does lots of "unusual" things in its build system, some of which break due
   to those patches, sometimes by gcc aborting, sometimes - and that's worse -
   by generating broken object code.
   Two options: use our toolchain (eg. make crosstools-i386) or enable the
   ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this
   case).
 * iasl (for targets with ACPI support)

Optional:

 * doxygen (for generating/viewing documentation)
 * gdb (for better debugging facilities on some targets)
 * ncurses (for 'make menuconfig' and 'make nconfig')
 * flex and bison (for regenerating parsers)


Building coreboot
-----------------

Please consult http://www.coreboot.org/Build_HOWTO for details.


Testing coreboot Without Modifying Your Hardware
------------------------------------------------

If you want to test coreboot without any risks before you really decide
to use it on your hardware, you can use the QEMU system emulator to run
coreboot virtually in QEMU.

Please see http://www.coreboot.org/QEMU for details.


Website and Mailing List
------------------------

Further details on the project, a FAQ, many HOWTOs, news, development
guidelines and more can be found on the coreboot website:

  http://www.coreboot.org

You can contact us directly on the coreboot mailing list:

  http://www.coreboot.org/Mailinglist


Copyright and License
---------------------

The copyright on coreboot is owned by quite a large number of individual
developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL).
Some files are licensed under the "GPL (version 2, or any later version)",
and some files are licensed under the "GPL, version 2". For some parts, which
were derived from other projects, other (GPL-compatible) licenses may apply.
Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.