Werner Zeh 0e35eb2434 siemens/mc_bdx1: Initialize GPIOs ... Add GPIO initialization for mc_bdx1 mainboard. Call init_gpios() as early as possible as FSP will set up things (like hiding PCI devices) rather early. If connections on the mainboard are dependent on GPIO settings then FSP can screw things up (e.g. disabling not yet connected PCI root ports). Change-Id: I003277cfb871f861900b7fcdc5ec851d4c1c1e6a Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/22035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>		2017-10-19 15:13:45 +00:00
..
acpi
acpi_tables.c
board_info.txt
cmos.layout	mb/*/*: Remove rtc nvram configurable baud rate	2017-09-23 11:06:25 +00:00
devicetree.cb	mb/siemens/mc_bdx1: Set up RTC backup mode to primary cell	2017-06-30 16:57:21 +00:00
dsdt.asl
fadt.c
gpio.h	siemens/mc_bdx1: Initialize GPIOs	2017-10-19 15:13:45 +00:00
irqroute.c
irqroute.h	siemens/mc_bdx1: Move SCI to IRQ 10	2016-07-08 08:36:53 +02:00
Kconfig	drivers/i2c/rx6110sa: Drop I2C interface arbitration	2017-08-18 15:33:58 +00:00
Kconfig.name
mainboard.c	siemens/mc_bdx1: Add delay to wait for legacy devices	2017-10-12 16:20:56 +00:00
Makefile.inc	Add newlines at the end of all coreboot files	2016-08-01 21:43:56 +02:00
romstage.c	siemens/mc_bdx1: Initialize GPIOs	2017-10-19 15:13:45 +00:00