coreboot-kgpe-d16/util/crossgcc/patches/gcc-5.2.0_riscv.patch

11725 lines
369 KiB
Diff
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

--- original-gcc/config.sub
+++ gcc-5.2.0/config.sub
@@ -340,6 +340,9 @@ case $basic_machine in
ms1)
basic_machine=mt-unknown
;;
+ riscv)
+ basic_machine=riscv-ucb
+ ;;
strongarm | thumb | xscale)
basic_machine=arm-unknown
--- original-gcc/gcc/config.gcc
+++ gcc-5.2.0/gcc/config.gcc
@@ -439,6 +439,10 @@ powerpc*-*-*)
esac
extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt"
;;
+riscv*)
+ cpu_type=riscv
+ need_64bit_hwint=yes
+ ;;
rs6000*-*-*)
extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt"
;;
@@ -1976,6 +1980,27 @@ microblaze*-*-elf)
cxx_target_objs="${cxx_target_objs} microblaze-c.o"
tmake_file="${tmake_file} microblaze/t-microblaze"
;;
+riscv32*-*-linux*) # Linux RISC-V
+ tm_file="elfos.h gnu-user.h linux.h glibc-stdint.h riscv/default-32.h ${tm_file} riscv/linux.h riscv/linux64.h"
+ tmake_file="${tmake_file} riscv/t-linux64"
+ gnu_ld=yes
+ gas=yes
+ gcc_cv_initfini_array=yes
+ ;;
+riscv*-*-linux*) # Linux RISC-V
+ tm_file="elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} riscv/linux.h riscv/linux64.h"
+ tmake_file="${tmake_file} riscv/t-linux64"
+ gnu_ld=yes
+ gas=yes
+ gcc_cv_initfini_array=yes
+ ;;
+riscv*-*-elf*) # Linux RISC-V
+ tm_file="elfos.h newlib-stdint.h ${tm_file} riscv/elf.h"
+ tmake_file="${tmake_file} riscv/t-elf"
+ gnu_ld=yes
+ gas=yes
+ gcc_cv_initfini_array=yes
+ ;;
mips*-*-netbsd*) # NetBSD/mips, either endian.
target_cpu_default="MASK_ABICALLS"
tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
@@ -3851,6 +3876,31 @@ case "${target}" in
done
;;
+ riscv*-*-*)
+ supported_defaults="abi arch arch_32 arch_64 float tune tune_32 tune_64"
+
+ case ${with_float} in
+ "" | soft | hard)
+ # OK
+ ;;
+ *)
+ echo "Unknown floating point type used in --with-float=$with_float" 1>&2
+ exit 1
+ ;;
+ esac
+
+ case ${with_abi} in
+ "" | 32 | 64)
+ # OK
+ ;;
+ *)
+ echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
+ exit 1
+ ;;
+ esac
+
+ ;;
+
mips*-*-*)
supported_defaults="abi arch arch_32 arch_64 float fpu nan fp_32 odd_spreg_32 tune tune_32 tune_64 divide llsc mips-plt synci"
--- original-gcc/gcc/configure
+++ gcc-5.2.0/gcc/configure
@@ -23708,6 +23708,25 @@ x3: .space 4
tls_first_minor=14
tls_as_opt="-a32 --fatal-warnings"
;;
+ riscv*-*-*)
+ conftest_s='
+ .section .tdata,"awT",@progbits
+x:
+ .word 2
+ .text
+ la.tls.gd a0,x
+ la.tls.ie a1,x
+ lui a0,%tls_ie_pcrel_hi(x)
+ lw a0,%pcrel_lo(x)(a0)
+ add a0,a0,tp
+ lw a0,0(a0)
+ lui a0,%tprel_hi(x)
+ add a0,a0,tp,%tprel_add(x)
+ lw a0,%tprel_lo(x)(a0)'
+ tls_first_major=2
+ tls_first_minor=21
+ tls_as_opt='-m32 --fatal-warnings'
+ ;;
s390-*-*)
conftest_s='
.section ".tdata","awT",@progbits
--- original-gcc/gcc/configure.ac
+++ gcc-5.2.0/gcc/configure.ac
@@ -3263,6 +3263,25 @@ x3: .space 4
tls_first_minor=14
tls_as_opt="-a32 --fatal-warnings"
;;
+ riscv*-*-*)
+ conftest_s='
+ .section .tdata,"awT",@progbits
+x:
+ .word 2
+ .text
+ la.tls.gd a0,x
+ la.tls.ie a1,x
+ lui a0,%tls_ie_pcrel_hi(x)
+ lw a0,%pcrel_lo(x)(a0)
+ add a0,a0,tp
+ lw a0,0(a0)
+ lui a0,%tprel_hi(x)
+ add a0,a0,tp,%tprel_add(x)
+ lw a0,%tprel_lo(x)(a0)'
+ tls_first_major=2
+ tls_first_minor=21
+ tls_as_opt='-m32 --fatal-warnings'
+ ;;
s390-*-*)
conftest_s='
.section ".tdata","awT",@progbits
--- original-gcc/gcc/testsuite/gcc.c-torture/execute/20101011-1.c
+++ gcc-5.2.0/gcc/testsuite/gcc.c-torture/execute/20101011-1.c
@@ -6,6 +6,9 @@
#elif defined (__powerpc__) || defined (__PPC__) || defined (__ppc__) || defined (__POWERPC__) || defined (__ppc)
/* On PPC division by zero does not trap. */
# define DO_TEST 0
+#elif defined (__riscv__)
+ /* On RISC-V division by zero does not trap. */
+# define DO_TEST 0
#elif defined (__SPU__)
/* On SPU division by zero does not trap. */
# define DO_TEST 0
--- original-gcc/gcc/testsuite/gcc.dg/20020312-2.c
+++ gcc-5.2.0/gcc/testsuite/gcc.dg/20020312-2.c
@@ -66,6 +66,8 @@ extern void abort (void);
# else
# define PIC_REG "30"
# endif
+#elif defined(__riscv__)
+/* No pic register. */
#elif defined(__RX__)
/* No pic register. */
#elif defined(__s390__)
--- original-gcc/gcc/testsuite/gcc.dg/20040813-1.c
+++ gcc-5.2.0/gcc/testsuite/gcc.dg/20040813-1.c
@@ -2,7 +2,7 @@
/* Contributed by Devang Patel <dpatel@apple.com> */
/* { dg-do compile } */
-/* { dg-skip-if "No stabs" { aarch64*-*-* mmix-*-* *-*-aix* alpha*-*-* hppa*64*-*-* ia64-*-* tile*-*-* nios2-*-* *-*-vxworks* nvptx-*-* } { "*" } { "" } } */
+/* { dg-skip-if "No stabs" { aarch64*-*-* mmix-*-* *-*-aix* alpha*-*-* hppa*64*-*-* ia64-*-* riscv*-*-* tile*-*-* nios2-*-* *-*-vxworks* nvptx-*-* } { "*" } { "" } } */
/* { dg-options "-gstabs" } */
int
--- original-gcc/gcc/testsuite/gcc.dg/stack-usage-1.c
+++ gcc-5.2.0/gcc/testsuite/gcc.dg/stack-usage-1.c
@@ -61,6 +61,8 @@
# else
# define SIZE 240
# endif
+#elif defined (__riscv__)
+# define SIZE 240
#elif defined (__AVR__)
# define SIZE 254
#elif defined (__s390x__)
--- original-gcc/libatomic/configure.tgt
+++ gcc-5.2.0/libatomic/configure.tgt
@@ -33,6 +33,7 @@ case "${target_cpu}" in
ARCH=alpha
;;
rs6000 | powerpc*) ARCH=powerpc ;;
+ riscv*) ARCH=riscv ;;
sh*) ARCH=sh ;;
arm*)
--- original-gcc/libgcc/config.host
+++ gcc-5.2.0/libgcc/config.host
@@ -167,6 +167,9 @@ powerpc*-*-*)
;;
rs6000*-*-*)
;;
+riscv*)
+ cpu_type=riscv
+ ;;
sparc64*-*-*)
cpu_type=sparc
;;
@@ -1057,6 +1060,18 @@ powerpcle-*-eabi*)
tmake_file="${tmake_file} rs6000/t-ppccomm rs6000/t-crtstuff t-crtstuff-pic t-fdpbit"
extra_parts="$extra_parts crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o ecrti.o ecrtn.o ncrti.o ncrtn.o"
;;
+riscv32*-*-linux*)
+ tmake_file="${tmake_file} riscv/t-fpbit riscv/t-dpbit riscv/t-tpbit riscv/t-elf riscv/t-elf32"
+ extra_parts="$extra_parts crtbegin.o crtend.o crti.o crtn.o crtendS.o crtbeginT.o"
+ ;;
+riscv*-*-linux*)
+ tmake_file="${tmake_file} riscv/t-fpbit riscv/t-dpbit riscv/t-tpbit riscv/t-elf"
+ extra_parts="$extra_parts crtbegin.o crtend.o crti.o crtn.o crtendS.o crtbeginT.o"
+ ;;
+riscv*-*-*)
+ tmake_file="${tmake_file} riscv/t-fpbit riscv/t-dpbit riscv/t-elf"
+ extra_parts="$extra_parts crtbegin.o crtend.o crti.o crtn.o"
+ ;;
rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
md_unwind_header=rs6000/aix-unwind.h
tmake_file="t-fdpbit rs6000/t-ppc64-fp rs6000/t-slibgcc-aix rs6000/t-ibm-ldouble"
--- original-gcc/libsanitizer/asan/asan_linux.cc
+++ gcc-5.2.0/libsanitizer/asan/asan_linux.cc
@@ -213,6 +213,11 @@ void GetPcSpBp(void *context, uptr *pc,
*pc = ucontext->uc_mcontext.gregs[31];
*bp = ucontext->uc_mcontext.gregs[30];
*sp = ucontext->uc_mcontext.gregs[29];
+# elif defined(__riscv__)
+ ucontext_t *ucontext = (ucontext_t*)context;
+ *pc = ucontext->uc_mcontext.gregs[REG_PC];
+ *bp = ucontext->uc_mcontext.gregs[REG_S0];
+ *sp = ucontext->uc_mcontext.gregs[REG_SP];
#else
# error "Unsupported arch"
#endif
--- original-gcc/libsanitizer/sanitizer_common/sanitizer_platform_limits_linux.cc
+++ gcc-5.2.0/libsanitizer/sanitizer_common/sanitizer_platform_limits_linux.cc
@@ -61,7 +61,8 @@ namespace __sanitizer {
} // namespace __sanitizer
#if !defined(__powerpc64__) && !defined(__x86_64__) && !defined(__aarch64__)\
- && !defined(__mips__) && !defined(__sparc__)
+ && !defined(__mips__) && !defined(__sparc__)\
+ && !defined(__riscv__)
COMPILER_CHECK(struct___old_kernel_stat_sz == sizeof(struct __old_kernel_stat));
#endif
--- original-gcc/libsanitizer/sanitizer_common/sanitizer_platform_limits_posix.h
+++ gcc-5.2.0/libsanitizer/sanitizer_common/sanitizer_platform_limits_posix.h
@@ -72,6 +72,10 @@ namespace __sanitizer {
const unsigned struct_kernel_stat_sz = 144;
#endif
const unsigned struct_kernel_stat64_sz = 104;
+#elif defined(__riscv__)
+ const unsigned struct___old_kernel_stat_sz = 0;
+ const unsigned struct_kernel_stat_sz = 128;
+ const unsigned struct_kernel_stat64_sz = 128;
#elif defined(__sparc__) && defined(__arch64__)
const unsigned struct___old_kernel_stat_sz = 0;
const unsigned struct_kernel_stat_sz = 104;
@@ -511,7 +515,7 @@ namespace __sanitizer {
typedef long __sanitizer___kernel_off_t;
#endif
-#if defined(__powerpc__) || defined(__mips__)
+#if defined(__powerpc__) || defined(__mips__) || defined(__riscv__)
typedef unsigned int __sanitizer___kernel_old_uid_t;
typedef unsigned int __sanitizer___kernel_old_gid_t;
#else
diff -ru gcc-5.1.0.orig/libsanitizer/sanitizer_common/sanitizer_platform.h gcc-5.1.0/libsanitizer/sanitizer_common/sanitizer_platform.h
--- gcc-5.1.0.orig/libsanitizer/sanitizer_common/sanitizer_platform.h 2015-05-13 19:36:27.061421043 -0700
+++ gcc-5.2.0/libsanitizer/sanitizer_common/sanitizer_platform.h 2015-05-13 19:44:19.274355577 -0700
@@ -98,9 +98,9 @@
// The AArch64 linux port uses the canonical syscall set as mandated by
// the upstream linux community for all new ports. Other ports may still
-// use legacy syscalls.
+// use legacy syscalls. The RISC-V port also does this.
#ifndef SANITIZER_USES_CANONICAL_LINUX_SYSCALLS
-# if defined(__aarch64__) && SANITIZER_LINUX
+# if (defined(__aarch64__) || defined(__riscv__)) && SANITIZER_LINUX
# define SANITIZER_USES_CANONICAL_LINUX_SYSCALLS 1
# else
# define SANITIZER_USES_CANONICAL_LINUX_SYSCALLS 0
diff -ru gcc-5.1.0.orig/libsanitizer/sanitizer_common/sanitizer_platform_limits_posix.h gcc-5.1.0/libsanitizer/sanitizer_common/sanitizer_platform_limits_posix.h
--- gcc-5.1.0.orig/libsanitizer/sanitizer_common/sanitizer_platform_limits_posix.h 2015-05-13 19:36:27.061421043 -0700
+++ gcc-5.2.0/libsanitizer/sanitizer_common/sanitizer_platform_limits_posix.h 2015-05-13 19:39:13.515487834 -0700
@@ -73,7 +73,6 @@
#endif
const unsigned struct_kernel_stat64_sz = 104;
#elif defined(__riscv__)
- const unsigned struct___old_kernel_stat_sz = 0;
const unsigned struct_kernel_stat_sz = 128;
const unsigned struct_kernel_stat64_sz = 128;
#elif defined(__sparc__) && defined(__arch64__)
@@ -104,7 +103,7 @@
#if SANITIZER_LINUX || SANITIZER_FREEBSD
-#if defined(__powerpc64__)
+#if defined(__powerpc64__) || defined(__riscv__)
const unsigned struct___old_kernel_stat_sz = 0;
#elif !defined(__sparc__)
const unsigned struct___old_kernel_stat_sz = 32;
diff -urN empty/gcc/common/config/riscv/riscv-common.c gcc-5.2.0/gcc/common/config/riscv/riscv-common.c
--- gcc-5.2.0/gcc/common/config/riscv/riscv-common.c 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/gcc/common/config/riscv/riscv-common.c 2015-07-17 22:36:52.315705931 +0200
@@ -0,0 +1,140 @@
+/* Common hooks for RISC-V.
+ Copyright (C) 1989-2014 Free Software Foundation, Inc.
+
+This file is part of GCC.
+
+GCC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 3, or (at your option)
+any later version.
+
+GCC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GCC; see the file COPYING3. If not see
+<http://www.gnu.org/licenses/>. */
+
+#include "config.h"
+#include "system.h"
+#include "coretypes.h"
+#include "tm.h"
+#include "common/common-target.h"
+#include "common/common-target-def.h"
+#include "opts.h"
+#include "flags.h"
+#include "errors.h"
+
+/* Parse a RISC-V ISA string into an option mask. */
+
+static void
+riscv_parse_arch_string (const char *isa, int *flags)
+{
+ const char *p = isa;
+
+ if (strncmp (p, "RV32", 4) == 0)
+ *flags |= MASK_32BIT, p += 4;
+ else if (strncmp (p, "RV64", 4) == 0)
+ *flags &= ~MASK_32BIT, p += 4;
+
+ if (*p++ != 'I')
+ {
+ error ("-march=%s: ISA strings must begin with I, RV32I, or RV64I", isa);
+ return;
+ }
+
+ *flags &= ~MASK_MULDIV;
+ if (*p == 'M')
+ *flags |= MASK_MULDIV, p++;
+
+ *flags &= ~MASK_ATOMIC;
+ if (*p == 'A')
+ *flags |= MASK_ATOMIC, p++;
+
+ *flags |= MASK_SOFT_FLOAT_ABI;
+ if (*p == 'F')
+ *flags &= ~MASK_SOFT_FLOAT_ABI, p++;
+
+ if (*p == 'D')
+ {
+ p++;
+ if (!TARGET_HARD_FLOAT)
+ {
+ error ("-march=%s: the D extension requires the F extension", isa);
+ return;
+ }
+ }
+ else if (TARGET_HARD_FLOAT)
+ {
+ error ("-march=%s: single-precision-only is not yet supported", isa);
+ return;
+ }
+
+ *flags &= ~MASK_RVC;
+ if (*p == 'C')
+ *flags |= MASK_RVC, p++;
+
+ /* FIXME: For now we just stop parsing when faced with a
+ non-standard RISC-V ISA extension, partially becauses of a
+ problem with the naming scheme. */
+ if (*p == 'X')
+ return;
+
+ if (*p)
+ {
+ error ("-march=%s: unsupported ISA substring %s", isa, p);
+ return;
+ }
+}
+
+static int
+riscv_flags_from_arch_string (const char *isa)
+{
+ int flags = 0;
+ riscv_parse_arch_string (isa, &flags);
+ return flags;
+}
+
+/* Implement TARGET_HANDLE_OPTION. */
+
+static bool
+riscv_handle_option (struct gcc_options *opts,
+ struct gcc_options *opts_set ATTRIBUTE_UNUSED,
+ const struct cl_decoded_option *decoded,
+ location_t loc ATTRIBUTE_UNUSED)
+{
+ switch (decoded->opt_index)
+ {
+ case OPT_march_:
+ riscv_parse_arch_string (decoded->arg, &opts->x_target_flags);
+ return true;
+
+ default:
+ return true;
+ }
+}
+
+/* Implement TARGET_OPTION_OPTIMIZATION_TABLE. */
+static const struct default_options riscv_option_optimization_table[] =
+ {
+ { OPT_LEVELS_1_PLUS, OPT_fsection_anchors, NULL, 1 },
+ { OPT_LEVELS_1_PLUS, OPT_fomit_frame_pointer, NULL, 1 },
+ { OPT_LEVELS_SIZE, OPT_msave_restore, NULL, 1 },
+ { OPT_LEVELS_NONE, 0, NULL, 0 }
+ };
+
+#undef TARGET_OPTION_OPTIMIZATION_TABLE
+#define TARGET_OPTION_OPTIMIZATION_TABLE riscv_option_optimization_table
+
+#undef TARGET_DEFAULT_TARGET_FLAGS
+#define TARGET_DEFAULT_TARGET_FLAGS \
+ (TARGET_DEFAULT \
+ | riscv_flags_from_arch_string (RISCV_ARCH_STRING_DEFAULT) \
+ | (TARGET_64BIT_DEFAULT ? 0 : MASK_32BIT))
+
+#undef TARGET_HANDLE_OPTION
+#define TARGET_HANDLE_OPTION riscv_handle_option
+
+struct gcc_targetm_common targetm_common = TARGETM_COMMON_INITIALIZER;
diff -urN empty/gcc/config/riscv/constraints.md gcc-5.2.0/gcc/config/riscv/constraints.md
--- gcc-5.2.0/gcc/config/riscv/constraints.md 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/gcc/config/riscv/constraints.md 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1,90 @@
+;; Constraint definitions for RISC-V target.
+;; Copyright (C) 2011-2014 Free Software Foundation, Inc.
+;; Contributed by Andrew Waterman (waterman@cs.berkeley.edu) at UC Berkeley.
+;; Based on MIPS target for GNU compiler.
+;;
+;; This file is part of GCC.
+;;
+;; GCC is free software; you can redistribute it and/or modify
+;; it under the terms of the GNU General Public License as published by
+;; the Free Software Foundation; either version 3, or (at your option)
+;; any later version.
+;;
+;; GCC is distributed in the hope that it will be useful,
+;; but WITHOUT ANY WARRANTY; without even the implied warranty of
+;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+;; GNU General Public License for more details.
+;;
+;; You should have received a copy of the GNU General Public License
+;; along with GCC; see the file COPYING3. If not see
+;; <http://www.gnu.org/licenses/>.
+
+;; Register constraints
+
+(define_register_constraint "f" "TARGET_HARD_FLOAT ? FP_REGS : NO_REGS"
+ "A floating-point register (if available).")
+
+(define_register_constraint "b" "ALL_REGS"
+ "@internal")
+
+(define_register_constraint "j" "T_REGS"
+ "@internal")
+
+;; Integer constraints
+
+(define_constraint "Z"
+ "@internal"
+ (and (match_code "const_int")
+ (match_test "1")))
+
+(define_constraint "I"
+ "An I-type 12-bit signed immediate."
+ (and (match_code "const_int")
+ (match_test "SMALL_OPERAND (ival)")))
+
+(define_constraint "J"
+ "Integer zero."
+ (and (match_code "const_int")
+ (match_test "ival == 0")))
+
+;; Floating-point constraints
+
+(define_constraint "G"
+ "Floating-point zero."
+ (and (match_code "const_double")
+ (match_test "op == CONST0_RTX (mode)")))
+
+;; General constraints
+
+(define_constraint "Q"
+ "@internal"
+ (match_operand 0 "const_arith_operand"))
+
+(define_memory_constraint "A"
+ "An address that is held in a general-purpose register."
+ (and (match_code "mem")
+ (match_test "GET_CODE(XEXP(op,0)) == REG")))
+
+(define_constraint "S"
+ "@internal
+ A constant call address."
+ (and (match_operand 0 "call_insn_operand")
+ (match_test "CONSTANT_P (op)")))
+
+(define_constraint "T"
+ "@internal
+ A constant @code{move_operand}."
+ (and (match_operand 0 "move_operand")
+ (match_test "CONSTANT_P (op)")))
+
+(define_memory_constraint "W"
+ "@internal
+ A memory address based on a member of @code{BASE_REG_CLASS}."
+ (and (match_code "mem")
+ (match_operand 0 "memory_operand")))
+
+(define_constraint "YG"
+ "@internal
+ A vector zero."
+ (and (match_code "const_vector")
+ (match_test "op == CONST0_RTX (mode)")))
diff -urN empty/gcc/config/riscv/default-32.h gcc-5.2.0/gcc/config/riscv/default-32.h
--- gcc-5.2.0/gcc/config/riscv/default-32.h 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/gcc/config/riscv/default-32.h 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1,22 @@
+/* Definitions of target machine for GCC, for RISC-V,
+ defaulting to 32-bit code generation.
+
+ Copyright (C) 1999-2014 Free Software Foundation, Inc.
+
+This file is part of GCC.
+
+GCC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 3, or (at your option)
+any later version.
+
+GCC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GCC; see the file COPYING3. If not see
+<http://www.gnu.org/licenses/>. */
+
+#define TARGET_64BIT_DEFAULT 0
diff -urN empty/gcc/config/riscv/elf.h gcc-5.2.0/gcc/config/riscv/elf.h
--- gcc-5.2.0/gcc/config/riscv/elf.h 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/gcc/config/riscv/elf.h 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1,31 @@
+/* Target macros for riscv*-elf targets.
+ Copyright (C) 1994, 1997, 1999, 2000, 2002, 2003, 2004, 2007, 2010
+ Free Software Foundation, Inc.
+
+This file is part of GCC.
+
+GCC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 3, or (at your option)
+any later version.
+
+GCC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GCC; see the file COPYING3. If not see
+<http://www.gnu.org/licenses/>. */
+
+/* Leave the linker script to choose the appropriate libraries. */
+#undef LIB_SPEC
+#define LIB_SPEC ""
+
+#undef STARTFILE_SPEC
+#define STARTFILE_SPEC "crt0%O%s crtbegin%O%s"
+
+#undef ENDFILE_SPEC
+#define ENDFILE_SPEC "crtend%O%s"
+
+#define NO_IMPLICIT_EXTERN_C 1
diff -urN empty/gcc/config/riscv/generic.md gcc-5.2.0/gcc/config/riscv/generic.md
--- gcc-5.2.0/gcc/config/riscv/generic.md 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/gcc/config/riscv/generic.md 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1,98 @@
+;; Generic DFA-based pipeline description for RISC-V targets.
+;; Copyright (C) 2011-2014 Free Software Foundation, Inc.
+;; Contributed by Andrew Waterman (waterman@cs.berkeley.edu) at UC Berkeley.
+;; Based on MIPS target for GNU compiler.
+
+;; This file is part of GCC.
+
+;; GCC is free software; you can redistribute it and/or modify it
+;; under the terms of the GNU General Public License as published
+;; by the Free Software Foundation; either version 3, or (at your
+;; option) any later version.
+
+;; GCC is distributed in the hope that it will be useful, but WITHOUT
+;; ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+;; or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+;; License for more details.
+
+;; You should have received a copy of the GNU General Public License
+;; along with GCC; see the file COPYING3. If not see
+;; <http://www.gnu.org/licenses/>.
+
+
+;; This file is derived from the old define_function_unit description.
+;; Each reservation can be overridden on a processor-by-processor basis.
+
+(define_insn_reservation "generic_alu" 1
+ (eq_attr "type" "unknown,const,arith,shift,slt,multi,nop,logical,move")
+ "alu")
+
+(define_insn_reservation "generic_load" 3
+ (eq_attr "type" "load,fpload,fpidxload")
+ "alu")
+
+(define_insn_reservation "generic_store" 1
+ (eq_attr "type" "store,fpstore,fpidxstore")
+ "alu")
+
+(define_insn_reservation "generic_xfer" 2
+ (eq_attr "type" "mfc,mtc")
+ "alu")
+
+(define_insn_reservation "generic_branch" 1
+ (eq_attr "type" "branch,jump,call")
+ "alu")
+
+(define_insn_reservation "generic_imul" 17
+ (eq_attr "type" "imul")
+ "imuldiv*17")
+
+(define_insn_reservation "generic_idiv" 38
+ (eq_attr "type" "idiv")
+ "imuldiv*38")
+
+(define_insn_reservation "generic_fcvt" 1
+ (eq_attr "type" "fcvt")
+ "alu")
+
+(define_insn_reservation "generic_fmove" 2
+ (eq_attr "type" "fmove")
+ "alu")
+
+(define_insn_reservation "generic_fcmp" 3
+ (eq_attr "type" "fcmp")
+ "alu")
+
+(define_insn_reservation "generic_fadd" 4
+ (eq_attr "type" "fadd")
+ "alu")
+
+(define_insn_reservation "generic_fmul_single" 7
+ (and (eq_attr "type" "fmul,fmadd")
+ (eq_attr "mode" "SF"))
+ "alu")
+
+(define_insn_reservation "generic_fmul_double" 8
+ (and (eq_attr "type" "fmul,fmadd")
+ (eq_attr "mode" "DF"))
+ "alu")
+
+(define_insn_reservation "generic_fdiv_single" 23
+ (and (eq_attr "type" "fdiv")
+ (eq_attr "mode" "SF"))
+ "alu")
+
+(define_insn_reservation "generic_fdiv_double" 36
+ (and (eq_attr "type" "fdiv")
+ (eq_attr "mode" "DF"))
+ "alu")
+
+(define_insn_reservation "generic_fsqrt_single" 54
+ (and (eq_attr "type" "fsqrt")
+ (eq_attr "mode" "SF"))
+ "alu")
+
+(define_insn_reservation "generic_fsqrt_double" 112
+ (and (eq_attr "type" "fsqrt")
+ (eq_attr "mode" "DF"))
+ "alu")
diff -urN empty/gcc/config/riscv/linux.h gcc-5.2.0/gcc/config/riscv/linux.h
--- gcc-5.2.0/gcc/config/riscv/linux.h 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/gcc/config/riscv/linux.h 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1,60 @@
+/* Definitions for RISC-V GNU/Linux systems with ELF format.
+ Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
+ 2007, 2008, 2010, 2011 Free Software Foundation, Inc.
+
+This file is part of GCC.
+
+GCC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 3, or (at your option)
+any later version.
+
+GCC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GCC; see the file COPYING3. If not see
+<http://www.gnu.org/licenses/>. */
+
+#undef WCHAR_TYPE
+#define WCHAR_TYPE "int"
+
+#undef WCHAR_TYPE_SIZE
+#define WCHAR_TYPE_SIZE 32
+
+#define TARGET_OS_CPP_BUILTINS() \
+ do { \
+ GNU_USER_TARGET_OS_CPP_BUILTINS(); \
+ /* The GNU C++ standard library requires this. */ \
+ if (c_dialect_cxx ()) \
+ builtin_define ("_GNU_SOURCE"); \
+ } while (0)
+
+#undef SUBTARGET_CPP_SPEC
+#define SUBTARGET_CPP_SPEC "%{posix:-D_POSIX_SOURCE} %{pthread:-D_REENTRANT}"
+
+#define GLIBC_DYNAMIC_LINKER "/lib/ld.so.1"
+
+/* Borrowed from sparc/linux.h */
+#undef LINK_SPEC
+#define LINK_SPEC \
+ "%{shared:-shared} \
+ %{!shared: \
+ %{!static: \
+ %{rdynamic:-export-dynamic} \
+ -dynamic-linker " GNU_USER_DYNAMIC_LINKER "} \
+ %{static:-static}}"
+
+#undef LIB_SPEC
+#define LIB_SPEC "\
+%{pthread:-lpthread} \
+%{shared:-lc} \
+%{!shared: \
+ %{profile:-lc_p} %{!profile:-lc}}"
+
+/* Similar to standard Linux, but adding -ffast-math support. */
+#undef ENDFILE_SPEC
+#define ENDFILE_SPEC \
+ "%{shared|pie:crtendS.o%s;:crtend.o%s} crtn.o%s"
diff -urN empty/gcc/config/riscv/linux64.h gcc-5.2.0/gcc/config/riscv/linux64.h
--- gcc-5.2.0/gcc/config/riscv/linux64.h 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/gcc/config/riscv/linux64.h 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1,43 @@
+/* Definitions for 64-bit RISC-V GNU/Linux systems with ELF format.
+ Copyright 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2010, 2011
+ Free Software Foundation, Inc.
+
+This file is part of GCC.
+
+GCC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 3, or (at your option)
+any later version.
+
+GCC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GCC; see the file COPYING3. If not see
+<http://www.gnu.org/licenses/>. */
+
+/* Force the default ABI flags onto the command line
+ in order to make the other specs easier to write. */
+#undef LIB_SPEC
+#define LIB_SPEC "\
+%{pthread:-lpthread} \
+%{shared:-lc} \
+%{!shared: \
+ %{profile:-lc_p} %{!profile:-lc}}"
+
+#define GLIBC_DYNAMIC_LINKER32 "/lib32/ld.so.1"
+#define GLIBC_DYNAMIC_LINKER64 "/lib/ld.so.1"
+
+#undef LINK_SPEC
+#define LINK_SPEC "\
+%{shared} \
+ %{!shared: \
+ %{!static: \
+ %{rdynamic:-export-dynamic} \
+ %{" OPT_ARCH64 ": -dynamic-linker " GNU_USER_DYNAMIC_LINKER64 "} \
+ %{" OPT_ARCH32 ": -dynamic-linker " GNU_USER_DYNAMIC_LINKER32 "}} \
+ %{static:-static}} \
+%{" OPT_ARCH64 ":-melf64lriscv} \
+%{" OPT_ARCH32 ":-melf32lriscv}"
diff -urN empty/gcc/config/riscv/opcode-riscv.h gcc-5.2.0/gcc/config/riscv/opcode-riscv.h
--- gcc-5.2.0/gcc/config/riscv/opcode-riscv.h 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/gcc/config/riscv/opcode-riscv.h 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1,149 @@
+/* RISC-V ISA encoding.
+ Copyright (C) 2011-2014 Free Software Foundation, Inc.
+ Contributed by Andrew Waterman (waterman@cs.berkeley.edu) at UC Berkeley.
+ Based on MIPS target for GNU compiler.
+
+This file is part of GDB, GAS, and the GNU binutils.
+
+GDB, GAS, and the GNU binutils are free software; you can redistribute
+them and/or modify them under the terms of the GNU General Public
+License as published by the Free Software Foundation; either version
+1, or (at your option) any later version.
+
+GDB, GAS, and the GNU binutils are distributed in the hope that they
+will be useful, but WITHOUT ANY WARRANTY; without even the implied
+warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this file; see the file COPYING. If not, write to the Free
+Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */
+
+#ifndef _RISCV_H_
+#define _RISCV_H_
+
+#define RV_X(x, s, n) (((x) >> (s)) & ((1<<(n))-1))
+#define RV_IMM_SIGN(x) (-(((x) >> 31) & 1))
+
+#define EXTRACT_ITYPE_IMM(x) \
+ (RV_X(x, 20, 12) | (RV_IMM_SIGN(x) << 12))
+#define EXTRACT_STYPE_IMM(x) \
+ (RV_X(x, 7, 5) | (RV_X(x, 25, 7) << 5) | (RV_IMM_SIGN(x) << 12))
+#define EXTRACT_SBTYPE_IMM(x) \
+ ((RV_X(x, 8, 4) << 1) | (RV_X(x, 25, 6) << 5) | (RV_X(x, 7, 1) << 11) | (RV_IMM_SIGN(x) << 12))
+#define EXTRACT_UTYPE_IMM(x) \
+ ((RV_X(x, 12, 20) << 20) | (RV_IMM_SIGN(x) << 32))
+#define EXTRACT_UJTYPE_IMM(x) \
+ ((RV_X(x, 21, 10) << 1) | (RV_X(x, 20, 1) << 11) | (RV_X(x, 12, 8) << 12) | (RV_IMM_SIGN(x) << 20))
+
+#define ENCODE_ITYPE_IMM(x) \
+ (RV_X(x, 0, 12) << 20)
+#define ENCODE_STYPE_IMM(x) \
+ ((RV_X(x, 0, 5) << 7) | (RV_X(x, 5, 7) << 25))
+#define ENCODE_SBTYPE_IMM(x) \
+ ((RV_X(x, 1, 4) << 8) | (RV_X(x, 5, 6) << 25) | (RV_X(x, 11, 1) << 7) | (RV_X(x, 12, 1) << 31))
+#define ENCODE_UTYPE_IMM(x) \
+ (RV_X(x, 12, 20) << 12)
+#define ENCODE_UJTYPE_IMM(x) \
+ ((RV_X(x, 1, 10) << 21) | (RV_X(x, 11, 1) << 20) | (RV_X(x, 12, 8) << 12) | (RV_X(x, 20, 1) << 31))
+
+#define VALID_ITYPE_IMM(x) (EXTRACT_ITYPE_IMM(ENCODE_ITYPE_IMM(x)) == (x))
+#define VALID_STYPE_IMM(x) (EXTRACT_STYPE_IMM(ENCODE_STYPE_IMM(x)) == (x))
+#define VALID_SBTYPE_IMM(x) (EXTRACT_SBTYPE_IMM(ENCODE_SBTYPE_IMM(x)) == (x))
+#define VALID_UTYPE_IMM(x) (EXTRACT_UTYPE_IMM(ENCODE_UTYPE_IMM(x)) == (x))
+#define VALID_UJTYPE_IMM(x) (EXTRACT_UJTYPE_IMM(ENCODE_UJTYPE_IMM(x)) == (x))
+
+#define RISCV_RTYPE(insn, rd, rs1, rs2) \
+ ((MATCH_ ## insn) | ((rd) << OP_SH_RD) | ((rs1) << OP_SH_RS1) | ((rs2) << OP_SH_RS2))
+#define RISCV_ITYPE(insn, rd, rs1, imm) \
+ ((MATCH_ ## insn) | ((rd) << OP_SH_RD) | ((rs1) << OP_SH_RS1) | ENCODE_ITYPE_IMM(imm))
+#define RISCV_STYPE(insn, rs1, rs2, imm) \
+ ((MATCH_ ## insn) | ((rs1) << OP_SH_RS1) | ((rs2) << OP_SH_RS2) | ENCODE_STYPE_IMM(imm))
+#define RISCV_SBTYPE(insn, rs1, rs2, target) \
+ ((MATCH_ ## insn) | ((rs1) << OP_SH_RS1) | ((rs2) << OP_SH_RS2) | ENCODE_SBTYPE_IMM(target))
+#define RISCV_UTYPE(insn, rd, bigimm) \
+ ((MATCH_ ## insn) | ((rd) << OP_SH_RD) | ENCODE_UTYPE_IMM(bigimm))
+#define RISCV_UJTYPE(insn, rd, target) \
+ ((MATCH_ ## insn) | ((rd) << OP_SH_RD) | ENCODE_UJTYPE_IMM(target))
+
+#define RISCV_NOP RISCV_ITYPE(ADDI, 0, 0, 0)
+
+#define RISCV_CONST_HIGH_PART(VALUE) \
+ (((VALUE) + (RISCV_IMM_REACH/2)) & ~(RISCV_IMM_REACH-1))
+#define RISCV_CONST_LOW_PART(VALUE) ((VALUE) - RISCV_CONST_HIGH_PART (VALUE))
+
+/* RV fields */
+
+#define OP_MASK_OP 0x7f
+#define OP_SH_OP 0
+#define OP_MASK_RS2 0x1f
+#define OP_SH_RS2 20
+#define OP_MASK_RS1 0x1f
+#define OP_SH_RS1 15
+#define OP_MASK_RS3 0x1f
+#define OP_SH_RS3 27
+#define OP_MASK_RD 0x1f
+#define OP_SH_RD 7
+#define OP_MASK_SHAMT 0x3f
+#define OP_SH_SHAMT 20
+#define OP_MASK_SHAMTW 0x1f
+#define OP_SH_SHAMTW 20
+#define OP_MASK_RM 0x7
+#define OP_SH_RM 12
+#define OP_MASK_PRED 0xf
+#define OP_SH_PRED 24
+#define OP_MASK_SUCC 0xf
+#define OP_SH_SUCC 20
+#define OP_MASK_AQ 0x1
+#define OP_SH_AQ 26
+#define OP_MASK_RL 0x1
+#define OP_SH_RL 25
+
+#define OP_MASK_VRD 0x1f
+#define OP_SH_VRD 7
+#define OP_MASK_VRS 0x1f
+#define OP_SH_VRS 15
+#define OP_MASK_VRT 0x1f
+#define OP_SH_VRT 20
+#define OP_MASK_VRR 0x1f
+#define OP_SH_VRR 25
+
+#define OP_MASK_VFD 0x1f
+#define OP_SH_VFD 7
+#define OP_MASK_VFS 0x1f
+#define OP_SH_VFS 15
+#define OP_MASK_VFT 0x1f
+#define OP_SH_VFT 20
+#define OP_MASK_VFR 0x1f
+#define OP_SH_VFR 25
+
+#define OP_MASK_IMMNGPR 0x3f
+#define OP_SH_IMMNGPR 20
+#define OP_MASK_IMMNFPR 0x3f
+#define OP_SH_IMMNFPR 26
+#define OP_MASK_IMMSEGNELM 0x1f
+#define OP_SH_IMMSEGNELM 17
+#define OP_MASK_IMMSEGSTNELM 0x1f
+#define OP_SH_IMMSEGSTNELM 12
+#define OP_MASK_CUSTOM_IMM 0x7f
+#define OP_SH_CUSTOM_IMM 25
+
+#define LINK_REG 1
+
+#define RISCV_JUMP_BITS RISCV_BIGIMM_BITS
+#define RISCV_JUMP_ALIGN_BITS 1
+#define RISCV_JUMP_ALIGN (1 << RISCV_JUMP_ALIGN_BITS)
+#define RISCV_JUMP_REACH ((1ULL<<RISCV_JUMP_BITS)*RISCV_JUMP_ALIGN)
+
+#define RISCV_IMM_BITS 12
+#define RISCV_BIGIMM_BITS (32-RISCV_IMM_BITS)
+#define RISCV_IMM_REACH (1LL<<RISCV_IMM_BITS)
+#define RISCV_BIGIMM_REACH (1LL<<RISCV_BIGIMM_BITS)
+#define RISCV_BRANCH_BITS RISCV_IMM_BITS
+#define RISCV_BRANCH_ALIGN_BITS RISCV_JUMP_ALIGN_BITS
+#define RISCV_BRANCH_ALIGN (1 << RISCV_BRANCH_ALIGN_BITS)
+#define RISCV_BRANCH_REACH (RISCV_IMM_REACH*RISCV_BRANCH_ALIGN)
+
+#include "riscv-opc.h"
+
+#endif /* _RISCV_H_ */
diff -urN empty/gcc/config/riscv/peephole.md gcc-5.2.0/gcc/config/riscv/peephole.md
--- gcc-5.2.0/gcc/config/riscv/peephole.md 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/gcc/config/riscv/peephole.md 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1,100 @@
+;;........................
+;; DI -> SI optimizations
+;;........................
+
+;; Simplify (int)(a + 1), etc.
+(define_peephole2
+ [(set (match_operand:DI 0 "register_operand")
+ (match_operator:DI 4 "modular_operator"
+ [(match_operand:DI 1 "register_operand")
+ (match_operand:DI 2 "arith_operand")]))
+ (set (match_operand:SI 3 "register_operand")
+ (truncate:SI (match_dup 0)))]
+ "TARGET_64BIT && (REGNO (operands[0]) == REGNO (operands[3]) || peep2_reg_dead_p (2, operands[0]))
+ && (GET_CODE (operands[4]) != ASHIFT || (CONST_INT_P (operands[2]) && INTVAL (operands[2]) < 32))"
+ [(set (match_dup 3)
+ (truncate:SI
+ (match_op_dup:DI 4
+ [(match_operand:DI 1 "register_operand")
+ (match_operand:DI 2 "arith_operand")])))])
+
+;; Simplify (int)a + 1, etc.
+(define_peephole2
+ [(set (match_operand:SI 0 "register_operand")
+ (truncate:SI (match_operand:DI 1 "register_operand")))
+ (set (match_operand:SI 3 "register_operand")
+ (match_operator:SI 4 "modular_operator"
+ [(match_dup 0)
+ (match_operand:SI 2 "arith_operand")]))]
+ "TARGET_64BIT && (REGNO (operands[0]) == REGNO (operands[3]) || peep2_reg_dead_p (2, operands[0]))"
+ [(set (match_dup 3)
+ (match_op_dup:SI 4 [(match_dup 1) (match_dup 2)]))])
+
+;; Simplify -(int)a, etc.
+(define_peephole2
+ [(set (match_operand:SI 0 "register_operand")
+ (truncate:SI (match_operand:DI 2 "register_operand")))
+ (set (match_operand:SI 3 "register_operand")
+ (match_operator:SI 4 "modular_operator"
+ [(match_operand:SI 1 "reg_or_0_operand")
+ (match_dup 0)]))]
+ "TARGET_64BIT && (REGNO (operands[0]) == REGNO (operands[3]) || peep2_reg_dead_p (2, operands[0]))"
+ [(set (match_dup 3)
+ (match_op_dup:SI 4 [(match_dup 1) (match_dup 2)]))])
+
+;; Simplify PIC loads to static variables.
+;; These will go away once we figure out how to emit auipc discretely.
+(define_insn "*local_pic_load<mode>"
+ [(set (match_operand:ANYI 0 "register_operand" "=r")
+ (mem:ANYI (match_operand 1 "absolute_symbolic_operand" "")))]
+ "flag_pic && SYMBOL_REF_LOCAL_P (operands[1])"
+ "<load>\t%0,%1"
+ [(set (attr "length") (const_int 8))])
+(define_insn "*local_pic_load<mode>"
+ [(set (match_operand:ANYF 0 "register_operand" "=f")
+ (mem:ANYF (match_operand 1 "absolute_symbolic_operand" "")))
+ (clobber (match_scratch:DI 2 "=&r"))]
+ "TARGET_HARD_FLOAT && TARGET_64BIT && flag_pic && SYMBOL_REF_LOCAL_P (operands[1])"
+ "<load>\t%0,%1,%2"
+ [(set (attr "length") (const_int 8))])
+(define_insn "*local_pic_load<mode>"
+ [(set (match_operand:ANYF 0 "register_operand" "=f")
+ (mem:ANYF (match_operand 1 "absolute_symbolic_operand" "")))
+ (clobber (match_scratch:SI 2 "=&r"))]
+ "TARGET_HARD_FLOAT && !TARGET_64BIT && flag_pic && SYMBOL_REF_LOCAL_P (operands[1])"
+ "<load>\t%0,%1,%2"
+ [(set (attr "length") (const_int 8))])
+(define_insn "*local_pic_loadu<mode>"
+ [(set (match_operand:SUPERQI 0 "register_operand" "=r")
+ (zero_extend:SUPERQI (mem:SUBDI (match_operand 1 "absolute_symbolic_operand" ""))))]
+ "flag_pic && SYMBOL_REF_LOCAL_P (operands[1])"
+ "<load>u\t%0,%1"
+ [(set (attr "length") (const_int 8))])
+(define_insn "*local_pic_storedi<mode>"
+ [(set (mem:ANYI (match_operand 0 "absolute_symbolic_operand" ""))
+ (match_operand:ANYI 1 "reg_or_0_operand" "rJ"))
+ (clobber (match_scratch:DI 2 "=&r"))]
+ "TARGET_64BIT && (flag_pic && SYMBOL_REF_LOCAL_P (operands[0]))"
+ "<store>\t%z1,%0,%2"
+ [(set (attr "length") (const_int 8))])
+(define_insn "*local_pic_storesi<mode>"
+ [(set (mem:ANYI (match_operand 0 "absolute_symbolic_operand" ""))
+ (match_operand:ANYI 1 "reg_or_0_operand" "rJ"))
+ (clobber (match_scratch:SI 2 "=&r"))]
+ "!TARGET_64BIT && (flag_pic && SYMBOL_REF_LOCAL_P (operands[0]))"
+ "<store>\t%z1,%0,%2"
+ [(set (attr "length") (const_int 8))])
+(define_insn "*local_pic_storedi<mode>"
+ [(set (mem:ANYF (match_operand 0 "absolute_symbolic_operand" ""))
+ (match_operand:ANYF 1 "register_operand" "f"))
+ (clobber (match_scratch:DI 2 "=&r"))]
+ "TARGET_HARD_FLOAT && TARGET_64BIT && (flag_pic && SYMBOL_REF_LOCAL_P (operands[0]))"
+ "<store>\t%1,%0,%2"
+ [(set (attr "length") (const_int 8))])
+(define_insn "*local_pic_storesi<mode>"
+ [(set (mem:ANYF (match_operand 0 "absolute_symbolic_operand" ""))
+ (match_operand:ANYF 1 "register_operand" "f"))
+ (clobber (match_scratch:SI 2 "=&r"))]
+ "TARGET_HARD_FLOAT && !TARGET_64BIT && (flag_pic && SYMBOL_REF_LOCAL_P (operands[0]))"
+ "<store>\t%1,%0,%2"
+ [(set (attr "length") (const_int 8))])
diff -urN empty/gcc/config/riscv/predicates.md gcc-5.2.0/gcc/config/riscv/predicates.md
--- gcc-5.2.0/gcc/config/riscv/predicates.md 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/gcc/config/riscv/predicates.md 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1,187 @@
+;; Predicate description for RISC-V target.
+;; Copyright (C) 2011-2014 Free Software Foundation, Inc.
+;; Contributed by Andrew Waterman (waterman@cs.berkeley.edu) at UC Berkeley.
+;; Based on MIPS target for GNU compiler.
+;;
+;; This file is part of GCC.
+;;
+;; GCC is free software; you can redistribute it and/or modify
+;; it under the terms of the GNU General Public License as published by
+;; the Free Software Foundation; either version 3, or (at your option)
+;; any later version.
+;;
+;; GCC is distributed in the hope that it will be useful,
+;; but WITHOUT ANY WARRANTY; without even the implied warranty of
+;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+;; GNU General Public License for more details.
+;;
+;; You should have received a copy of the GNU General Public License
+;; along with GCC; see the file COPYING3. If not see
+;; <http://www.gnu.org/licenses/>.
+
+(define_predicate "const_arith_operand"
+ (and (match_code "const_int")
+ (match_test "SMALL_OPERAND (INTVAL (op))")))
+
+(define_predicate "arith_operand"
+ (ior (match_operand 0 "const_arith_operand")
+ (match_operand 0 "register_operand")))
+
+(define_predicate "sle_operand"
+ (and (match_code "const_int")
+ (match_test "SMALL_OPERAND (INTVAL (op) + 1)")))
+
+(define_predicate "sleu_operand"
+ (and (match_operand 0 "sle_operand")
+ (match_test "INTVAL (op) + 1 != 0")))
+
+(define_predicate "const_0_operand"
+ (and (match_code "const_int,const_double,const_vector")
+ (match_test "op == CONST0_RTX (GET_MODE (op))")))
+
+(define_predicate "reg_or_0_operand"
+ (ior (match_operand 0 "const_0_operand")
+ (match_operand 0 "register_operand")))
+
+(define_predicate "const_1_operand"
+ (and (match_code "const_int,const_double,const_vector")
+ (match_test "op == CONST1_RTX (GET_MODE (op))")))
+
+(define_predicate "reg_or_1_operand"
+ (ior (match_operand 0 "const_1_operand")
+ (match_operand 0 "register_operand")))
+
+;; Only use branch-on-bit sequences when the mask is not an ANDI immediate.
+(define_predicate "branch_on_bit_operand"
+ (and (match_code "const_int")
+ (match_test "INTVAL (op) >= RISCV_IMM_BITS - 1")))
+
+;; This is used for indexing into vectors, and hence only accepts const_int.
+(define_predicate "const_0_or_1_operand"
+ (and (match_code "const_int")
+ (ior (match_test "op == CONST0_RTX (GET_MODE (op))")
+ (match_test "op == CONST1_RTX (GET_MODE (op))"))))
+
+(define_special_predicate "pc_or_label_operand"
+ (match_code "pc,label_ref"))
+
+;; A legitimate CONST_INT operand that takes more than one instruction
+;; to load.
+(define_predicate "splittable_const_int_operand"
+ (match_code "const_int")
+{
+ /* Don't handle multi-word moves this way; we don't want to introduce
+ the individual word-mode moves until after reload. */
+ if (GET_MODE_SIZE (mode) > UNITS_PER_WORD)
+ return false;
+
+ /* Otherwise check whether the constant can be loaded in a single
+ instruction. */
+ return !LUI_INT (op) && !SMALL_INT (op);
+})
+
+(define_predicate "move_operand"
+ (match_operand 0 "general_operand")
+{
+ enum riscv_symbol_type symbol_type;
+
+ /* The thinking here is as follows:
+
+ (1) The move expanders should split complex load sequences into
+ individual instructions. Those individual instructions can
+ then be optimized by all rtl passes.
+
+ (2) The target of pre-reload load sequences should not be used
+ to store temporary results. If the target register is only
+ assigned one value, reload can rematerialize that value
+ on demand, rather than spill it to the stack.
+
+ (3) If we allowed pre-reload passes like combine and cse to recreate
+ complex load sequences, we would want to be able to split the
+ sequences before reload as well, so that the pre-reload scheduler
+ can see the individual instructions. This falls foul of (2);
+ the splitter would be forced to reuse the target register for
+ intermediate results.
+
+ (4) We want to define complex load splitters for combine. These
+ splitters can request a temporary scratch register, which avoids
+ the problem in (2). They allow things like:
+
+ (set (reg T1) (high SYM))
+ (set (reg T2) (low (reg T1) SYM))
+ (set (reg X) (plus (reg T2) (const_int OFFSET)))
+
+ to be combined into:
+
+ (set (reg T3) (high SYM+OFFSET))
+ (set (reg X) (lo_sum (reg T3) SYM+OFFSET))
+
+ if T2 is only used this once. */
+ switch (GET_CODE (op))
+ {
+ case CONST_INT:
+ return !splittable_const_int_operand (op, mode);
+
+ case CONST:
+ case SYMBOL_REF:
+ case LABEL_REF:
+ return (riscv_symbolic_constant_p (op, &symbol_type)
+ && !riscv_hi_relocs[symbol_type]);
+
+ case HIGH:
+ op = XEXP (op, 0);
+ return riscv_symbolic_constant_p (op, &symbol_type);
+
+ default:
+ return true;
+ }
+})
+
+(define_predicate "consttable_operand"
+ (match_test "CONSTANT_P (op)"))
+
+(define_predicate "symbolic_operand"
+ (match_code "const,symbol_ref,label_ref")
+{
+ enum riscv_symbol_type type;
+ return riscv_symbolic_constant_p (op, &type);
+})
+
+(define_predicate "absolute_symbolic_operand"
+ (match_code "const,symbol_ref,label_ref")
+{
+ enum riscv_symbol_type type;
+ return (riscv_symbolic_constant_p (op, &type)
+ && type == SYMBOL_ABSOLUTE);
+})
+
+(define_predicate "plt_symbolic_operand"
+ (match_code "const,symbol_ref,label_ref")
+{
+ enum riscv_symbol_type type;
+ return (riscv_symbolic_constant_p (op, &type)
+ && type == SYMBOL_GOT_DISP && !SYMBOL_REF_WEAK (op) && TARGET_PLT);
+})
+
+(define_predicate "call_insn_operand"
+ (ior (match_operand 0 "absolute_symbolic_operand")
+ (match_operand 0 "plt_symbolic_operand")
+ (match_operand 0 "register_operand")))
+
+(define_predicate "symbol_ref_operand"
+ (match_code "symbol_ref"))
+
+(define_predicate "modular_operator"
+ (match_code "plus,minus,mult,ashift"))
+
+(define_predicate "equality_operator"
+ (match_code "eq,ne"))
+
+(define_predicate "order_operator"
+ (match_code "eq,ne,lt,ltu,le,leu,ge,geu,gt,gtu"))
+
+(define_predicate "fp_order_operator"
+ (match_code "eq,lt,le,gt,ge"))
+
+(define_predicate "fp_unorder_operator"
+ (match_code "ordered,unordered"))
diff -urN empty/gcc/config/riscv/riscv-ftypes.def gcc-5.2.0/gcc/config/riscv/riscv-ftypes.def
--- gcc-5.2.0/gcc/config/riscv/riscv-ftypes.def 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/gcc/config/riscv/riscv-ftypes.def 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1,39 @@
+/* Definitions of prototypes for RISC-V built-in functions.
+ Copyright (C) 2011-2014 Free Software Foundation, Inc.
+ Contributed by Andrew Waterman (waterman@cs.berkeley.edu) at UC Berkeley.
+ Based on MIPS target for GNU compiler.
+
+This file is part of GCC.
+
+GCC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 3, or (at your option)
+any later version.
+
+GCC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GCC; see the file COPYING3. If not see
+<http://www.gnu.org/licenses/>. */
+
+/* Invoke DEF_RISCV_FTYPE (NARGS, LIST) for each prototype used by
+ MIPS built-in functions, where:
+
+ NARGS is the number of arguments.
+ LIST contains the return-type code followed by the codes for each
+ argument type.
+
+ Argument- and return-type codes are either modes or one of the following:
+
+ VOID for void_type_node
+ INT for integer_type_node
+ POINTER for ptr_type_node
+
+ (we don't use PTR because that's a ANSI-compatibillity macro).
+
+ Please keep this list lexicographically sorted by the LIST argument. */
+
+DEF_RISCV_FTYPE (1, (VOID, VOID))
diff -urN empty/gcc/config/riscv/riscv-modes.def gcc-5.2.0/gcc/config/riscv/riscv-modes.def
--- gcc-5.2.0/gcc/config/riscv/riscv-modes.def 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/gcc/config/riscv/riscv-modes.def 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1,26 @@
+/* Extra machine modes for RISC-V target.
+ Copyright (C) 2011-2014 Free Software Foundation, Inc.
+ Contributed by Andrew Waterman (waterman@cs.berkeley.edu) at UC Berkeley.
+ Based on MIPS target for GNU compiler.
+
+This file is part of GCC.
+
+GCC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 3, or (at your option)
+any later version.
+
+GCC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GCC; see the file COPYING3. If not see
+<http://www.gnu.org/licenses/>. */
+
+FLOAT_MODE (TF, 16, ieee_quad_format);
+
+/* Vector modes. */
+VECTOR_MODES (INT, 4); /* V8QI V4HI V2SI */
+VECTOR_MODES (FLOAT, 4); /* V4HF V2SF */
diff -urN empty/gcc/config/riscv/riscv-opc.h gcc-5.2.0/gcc/config/riscv/riscv-opc.h
--- gcc-5.2.0/gcc/config/riscv/riscv-opc.h 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/gcc/config/riscv/riscv-opc.h 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1,1348 @@
+/* Automatically generated by parse-opcodes */
+#ifndef RISCV_ENCODING_H
+#define RISCV_ENCODING_H
+#define MATCH_ADD 0x33
+#define MASK_ADD 0xfe00707f
+#define MATCH_ADDI 0x13
+#define MASK_ADDI 0x707f
+#define MATCH_ADDIW 0x1b
+#define MASK_ADDIW 0x707f
+#define MATCH_ADDW 0x3b
+#define MASK_ADDW 0xfe00707f
+#define MATCH_AMOADD_D 0x302f
+#define MASK_AMOADD_D 0xf800707f
+#define MATCH_AMOADD_W 0x202f
+#define MASK_AMOADD_W 0xf800707f
+#define MATCH_AMOAND_D 0x6000302f
+#define MASK_AMOAND_D 0xf800707f
+#define MATCH_AMOAND_W 0x6000202f
+#define MASK_AMOAND_W 0xf800707f
+#define MATCH_AMOMAX_D 0xa000302f
+#define MASK_AMOMAX_D 0xf800707f
+#define MATCH_AMOMAX_W 0xa000202f
+#define MASK_AMOMAX_W 0xf800707f
+#define MATCH_AMOMAXU_D 0xe000302f
+#define MASK_AMOMAXU_D 0xf800707f
+#define MATCH_AMOMAXU_W 0xe000202f
+#define MASK_AMOMAXU_W 0xf800707f
+#define MATCH_AMOMIN_D 0x8000302f
+#define MASK_AMOMIN_D 0xf800707f
+#define MATCH_AMOMIN_W 0x8000202f
+#define MASK_AMOMIN_W 0xf800707f
+#define MATCH_AMOMINU_D 0xc000302f
+#define MASK_AMOMINU_D 0xf800707f
+#define MATCH_AMOMINU_W 0xc000202f
+#define MASK_AMOMINU_W 0xf800707f
+#define MATCH_AMOOR_D 0x4000302f
+#define MASK_AMOOR_D 0xf800707f
+#define MATCH_AMOOR_W 0x4000202f
+#define MASK_AMOOR_W 0xf800707f
+#define MATCH_AMOSWAP_D 0x800302f
+#define MASK_AMOSWAP_D 0xf800707f
+#define MATCH_AMOSWAP_W 0x800202f
+#define MASK_AMOSWAP_W 0xf800707f
+#define MATCH_AMOXOR_D 0x2000302f
+#define MASK_AMOXOR_D 0xf800707f
+#define MATCH_AMOXOR_W 0x2000202f
+#define MASK_AMOXOR_W 0xf800707f
+#define MATCH_AND 0x7033
+#define MASK_AND 0xfe00707f
+#define MATCH_ANDI 0x7013
+#define MASK_ANDI 0x707f
+#define MATCH_AUIPC 0x17
+#define MASK_AUIPC 0x7f
+#define MATCH_BEQ 0x63
+#define MASK_BEQ 0x707f
+#define MATCH_BGE 0x5063
+#define MASK_BGE 0x707f
+#define MATCH_BGEU 0x7063
+#define MASK_BGEU 0x707f
+#define MATCH_BLT 0x4063
+#define MASK_BLT 0x707f
+#define MATCH_BLTU 0x6063
+#define MASK_BLTU 0x707f
+#define MATCH_BNE 0x1063
+#define MASK_BNE 0x707f
+#define MATCH_C_ADD 0x1000
+#define MASK_C_ADD 0xf003
+#define MATCH_C_ADD3 0xa000
+#define MASK_C_ADD3 0xe063
+#define MATCH_C_ADDI 0xc002
+#define MASK_C_ADDI 0xe003
+#define MATCH_C_ADDI16SP 0xc002
+#define MASK_C_ADDI16SP 0xef83
+#define MATCH_C_ADDI4SPN 0xa001
+#define MASK_C_ADDI4SPN 0xe003
+#define MATCH_C_ADDIN 0x8001
+#define MASK_C_ADDIN 0xe063
+#define MATCH_C_ADDIW 0xe002
+#define MASK_C_ADDIW 0xe003
+#define MATCH_C_ADDW 0x9000
+#define MASK_C_ADDW 0xf003
+#define MATCH_C_AND3 0xa060
+#define MASK_C_AND3 0xe063
+#define MATCH_C_ANDI 0xe002
+#define MASK_C_ANDI 0xe003
+#define MATCH_C_ANDIN 0x8061
+#define MASK_C_ANDIN 0xe063
+#define MATCH_C_BEQZ 0x4002
+#define MASK_C_BEQZ 0xe003
+#define MATCH_C_BGEZ 0xe001
+#define MASK_C_BGEZ 0xe003
+#define MATCH_C_BLTZ 0x6001
+#define MASK_C_BLTZ 0xe003
+#define MATCH_C_BNEZ 0x6002
+#define MASK_C_BNEZ 0xe003
+#define MATCH_C_EBREAK 0x1000
+#define MASK_C_EBREAK 0xffff
+#define MATCH_C_J 0x2
+#define MASK_C_J 0xe003
+#define MATCH_C_JAL 0x2002
+#define MASK_C_JAL 0xe003
+#define MATCH_C_JALR 0xa002
+#define MASK_C_JALR 0xf07f
+#define MATCH_C_JR 0x8002
+#define MASK_C_JR 0xf07f
+#define MATCH_C_LD 0xe000
+#define MASK_C_LD 0xe003
+#define MATCH_C_LDSP 0xe001
+#define MASK_C_LDSP 0xe003
+#define MATCH_C_LI 0x8002
+#define MASK_C_LI 0xe003
+#define MATCH_C_LUI 0xa002
+#define MASK_C_LUI 0xe003
+#define MATCH_C_LW 0xc000
+#define MASK_C_LW 0xe003
+#define MATCH_C_LWSP 0xc001
+#define MASK_C_LWSP 0xe003
+#define MATCH_C_MV 0x0
+#define MASK_C_MV 0xf003
+#define MATCH_C_OR3 0xa040
+#define MASK_C_OR3 0xe063
+#define MATCH_C_ORIN 0x8041
+#define MASK_C_ORIN 0xe063
+#define MATCH_C_SD 0x6000
+#define MASK_C_SD 0xe003
+#define MATCH_C_SDSP 0x6001
+#define MASK_C_SDSP 0xe003
+#define MATCH_C_SLL 0x6400
+#define MASK_C_SLL 0xfc63
+#define MATCH_C_SLLI 0x1
+#define MASK_C_SLLI 0xe003
+#define MATCH_C_SLLIW 0x8001
+#define MASK_C_SLLIW 0xe003
+#define MATCH_C_SLLR 0x6c00
+#define MASK_C_SLLR 0xfc63
+#define MATCH_C_SLT 0x6440
+#define MASK_C_SLT 0xfc63
+#define MATCH_C_SLTR 0x6c40
+#define MASK_C_SLTR 0xfc63
+#define MATCH_C_SLTU 0x6460
+#define MASK_C_SLTU 0xfc63
+#define MATCH_C_SLTUR 0x6c60
+#define MASK_C_SLTUR 0xfc63
+#define MATCH_C_SRA 0x6020
+#define MASK_C_SRA 0xfc63
+#define MATCH_C_SRAI 0x2000
+#define MASK_C_SRAI 0xe003
+#define MATCH_C_SRL 0x6420
+#define MASK_C_SRL 0xfc63
+#define MATCH_C_SRLI 0x2001
+#define MASK_C_SRLI 0xe003
+#define MATCH_C_SRLR 0x6c20
+#define MASK_C_SRLR 0xfc63
+#define MATCH_C_SUB 0x8000
+#define MASK_C_SUB 0xf003
+#define MATCH_C_SUB3 0xa020
+#define MASK_C_SUB3 0xe063
+#define MATCH_C_SW 0x4000
+#define MASK_C_SW 0xe003
+#define MATCH_C_SWSP 0x4001
+#define MASK_C_SWSP 0xe003
+#define MATCH_C_XOR 0x6000
+#define MASK_C_XOR 0xfc63
+#define MATCH_C_XORIN 0x8021
+#define MASK_C_XORIN 0xe063
+#define MATCH_CSRRC 0x3073
+#define MASK_CSRRC 0x707f
+#define MATCH_CSRRCI 0x7073
+#define MASK_CSRRCI 0x707f
+#define MATCH_CSRRS 0x2073
+#define MASK_CSRRS 0x707f
+#define MATCH_CSRRSI 0x6073
+#define MASK_CSRRSI 0x707f
+#define MATCH_CSRRW 0x1073
+#define MASK_CSRRW 0x707f
+#define MATCH_CSRRWI 0x5073
+#define MASK_CSRRWI 0x707f
+#define MATCH_CUSTOM0 0xb
+#define MASK_CUSTOM0 0x707f
+#define MATCH_CUSTOM0_RD 0x400b
+#define MASK_CUSTOM0_RD 0x707f
+#define MATCH_CUSTOM0_RD_RS1 0x600b
+#define MASK_CUSTOM0_RD_RS1 0x707f
+#define MATCH_CUSTOM0_RD_RS1_RS2 0x700b
+#define MASK_CUSTOM0_RD_RS1_RS2 0x707f
+#define MATCH_CUSTOM0_RS1 0x200b
+#define MASK_CUSTOM0_RS1 0x707f
+#define MATCH_CUSTOM0_RS1_RS2 0x300b
+#define MASK_CUSTOM0_RS1_RS2 0x707f
+#define MATCH_CUSTOM1 0x2b
+#define MASK_CUSTOM1 0x707f
+#define MATCH_CUSTOM1_RD 0x402b
+#define MASK_CUSTOM1_RD 0x707f
+#define MATCH_CUSTOM1_RD_RS1 0x602b
+#define MASK_CUSTOM1_RD_RS1 0x707f
+#define MATCH_CUSTOM1_RD_RS1_RS2 0x702b
+#define MASK_CUSTOM1_RD_RS1_RS2 0x707f
+#define MATCH_CUSTOM1_RS1 0x202b
+#define MASK_CUSTOM1_RS1 0x707f
+#define MATCH_CUSTOM1_RS1_RS2 0x302b
+#define MASK_CUSTOM1_RS1_RS2 0x707f
+#define MATCH_CUSTOM2 0x5b
+#define MASK_CUSTOM2 0x707f
+#define MATCH_CUSTOM2_RD 0x405b
+#define MASK_CUSTOM2_RD 0x707f
+#define MATCH_CUSTOM2_RD_RS1 0x605b
+#define MASK_CUSTOM2_RD_RS1 0x707f
+#define MATCH_CUSTOM2_RD_RS1_RS2 0x705b
+#define MASK_CUSTOM2_RD_RS1_RS2 0x707f
+#define MATCH_CUSTOM2_RS1 0x205b
+#define MASK_CUSTOM2_RS1 0x707f
+#define MATCH_CUSTOM2_RS1_RS2 0x305b
+#define MASK_CUSTOM2_RS1_RS2 0x707f
+#define MATCH_CUSTOM3 0x7b
+#define MASK_CUSTOM3 0x707f
+#define MATCH_CUSTOM3_RD 0x407b
+#define MASK_CUSTOM3_RD 0x707f
+#define MATCH_CUSTOM3_RD_RS1 0x607b
+#define MASK_CUSTOM3_RD_RS1 0x707f
+#define MATCH_CUSTOM3_RD_RS1_RS2 0x707b
+#define MASK_CUSTOM3_RD_RS1_RS2 0x707f
+#define MATCH_CUSTOM3_RS1 0x207b
+#define MASK_CUSTOM3_RS1 0x707f
+#define MATCH_CUSTOM3_RS1_RS2 0x307b
+#define MASK_CUSTOM3_RS1_RS2 0x707f
+#define MATCH_DIV 0x2004033
+#define MASK_DIV 0xfe00707f
+#define MATCH_DIVU 0x2005033
+#define MASK_DIVU 0xfe00707f
+#define MATCH_DIVUW 0x200503b
+#define MASK_DIVUW 0xfe00707f
+#define MATCH_DIVW 0x200403b
+#define MASK_DIVW 0xfe00707f
+#define MATCH_EBREAK 0x100073
+#define MASK_EBREAK 0xffffffff
+#define MATCH_ECALL 0x73
+#define MASK_ECALL 0xffffffff
+#define MATCH_ERET 0x10000073
+#define MASK_ERET 0xffffffff
+#define MATCH_FADD_D 0x2000053
+#define MASK_FADD_D 0xfe00007f
+#define MATCH_FADD_H 0x4000053
+#define MASK_FADD_H 0xfe00007f
+#define MATCH_FADD_S 0x53
+#define MASK_FADD_S 0xfe00007f
+#define MATCH_FCLASS_D 0xe2001053
+#define MASK_FCLASS_D 0xfff0707f
+#define MATCH_FCLASS_S 0xe0001053
+#define MASK_FCLASS_S 0xfff0707f
+#define MATCH_FCVT_D_H 0x8c000053
+#define MASK_FCVT_D_H 0xfff0007f
+#define MATCH_FCVT_D_L 0xd2200053
+#define MASK_FCVT_D_L 0xfff0007f
+#define MATCH_FCVT_D_LU 0xd2300053
+#define MASK_FCVT_D_LU 0xfff0007f
+#define MATCH_FCVT_D_S 0x42000053
+#define MASK_FCVT_D_S 0xfff0007f
+#define MATCH_FCVT_D_W 0xd2000053
+#define MASK_FCVT_D_W 0xfff0007f
+#define MATCH_FCVT_D_WU 0xd2100053
+#define MASK_FCVT_D_WU 0xfff0007f
+#define MATCH_FCVT_H_D 0x92000053
+#define MASK_FCVT_H_D 0xfff0007f
+#define MATCH_FCVT_H_L 0x64000053
+#define MASK_FCVT_H_L 0xfff0007f
+#define MATCH_FCVT_H_LU 0x6c000053
+#define MASK_FCVT_H_LU 0xfff0007f
+#define MATCH_FCVT_H_S 0x90000053
+#define MASK_FCVT_H_S 0xfff0007f
+#define MATCH_FCVT_H_W 0x74000053
+#define MASK_FCVT_H_W 0xfff0007f
+#define MATCH_FCVT_H_WU 0x7c000053
+#define MASK_FCVT_H_WU 0xfff0007f
+#define MATCH_FCVT_L_D 0xc2200053
+#define MASK_FCVT_L_D 0xfff0007f
+#define MATCH_FCVT_L_H 0x44000053
+#define MASK_FCVT_L_H 0xfff0007f
+#define MATCH_FCVT_L_S 0xc0200053
+#define MASK_FCVT_L_S 0xfff0007f
+#define MATCH_FCVT_LU_D 0xc2300053
+#define MASK_FCVT_LU_D 0xfff0007f
+#define MATCH_FCVT_LU_H 0x4c000053
+#define MASK_FCVT_LU_H 0xfff0007f
+#define MATCH_FCVT_LU_S 0xc0300053
+#define MASK_FCVT_LU_S 0xfff0007f
+#define MATCH_FCVT_S_D 0x40100053
+#define MASK_FCVT_S_D 0xfff0007f
+#define MATCH_FCVT_S_H 0x84000053
+#define MASK_FCVT_S_H 0xfff0007f
+#define MATCH_FCVT_S_L 0xd0200053
+#define MASK_FCVT_S_L 0xfff0007f
+#define MATCH_FCVT_S_LU 0xd0300053
+#define MASK_FCVT_S_LU 0xfff0007f
+#define MATCH_FCVT_S_W 0xd0000053
+#define MASK_FCVT_S_W 0xfff0007f
+#define MATCH_FCVT_S_WU 0xd0100053
+#define MASK_FCVT_S_WU 0xfff0007f
+#define MATCH_FCVT_W_D 0xc2000053
+#define MASK_FCVT_W_D 0xfff0007f
+#define MATCH_FCVT_W_H 0x54000053
+#define MASK_FCVT_W_H 0xfff0007f
+#define MATCH_FCVT_W_S 0xc0000053
+#define MASK_FCVT_W_S 0xfff0007f
+#define MATCH_FCVT_WU_D 0xc2100053
+#define MASK_FCVT_WU_D 0xfff0007f
+#define MATCH_FCVT_WU_H 0x5c000053
+#define MASK_FCVT_WU_H 0xfff0007f
+#define MATCH_FCVT_WU_S 0xc0100053
+#define MASK_FCVT_WU_S 0xfff0007f
+#define MATCH_FDIV_D 0x1a000053
+#define MASK_FDIV_D 0xfe00007f
+#define MATCH_FDIV_H 0x1c000053
+#define MASK_FDIV_H 0xfe00007f
+#define MATCH_FDIV_S 0x18000053
+#define MASK_FDIV_S 0xfe00007f
+#define MATCH_FENCE 0xf
+#define MASK_FENCE 0x707f
+#define MATCH_FENCE_I 0x100f
+#define MASK_FENCE_I 0x707f
+#define MATCH_FEQ_D 0xa2002053
+#define MASK_FEQ_D 0xfe00707f
+#define MATCH_FEQ_H 0xac000053
+#define MASK_FEQ_H 0xfe00707f
+#define MATCH_FEQ_S 0xa0002053
+#define MASK_FEQ_S 0xfe00707f
+#define MATCH_FLD 0x3007
+#define MASK_FLD 0x707f
+#define MATCH_FLE_D 0xa2000053
+#define MASK_FLE_D 0xfe00707f
+#define MATCH_FLE_H 0xbc000053
+#define MASK_FLE_H 0xfe00707f
+#define MATCH_FLE_S 0xa0000053
+#define MASK_FLE_S 0xfe00707f
+#define MATCH_FLH 0x1007
+#define MASK_FLH 0x707f
+#define MATCH_FLT_D 0xa2001053
+#define MASK_FLT_D 0xfe00707f
+#define MATCH_FLT_H 0xb4000053
+#define MASK_FLT_H 0xfe00707f
+#define MATCH_FLT_S 0xa0001053
+#define MASK_FLT_S 0xfe00707f
+#define MATCH_FLW 0x2007
+#define MASK_FLW 0x707f
+#define MATCH_FMADD_D 0x2000043
+#define MASK_FMADD_D 0x600007f
+#define MATCH_FMADD_H 0x4000043
+#define MASK_FMADD_H 0x600007f
+#define MATCH_FMADD_S 0x43
+#define MASK_FMADD_S 0x600007f
+#define MATCH_FMAX_D 0x2a001053
+#define MASK_FMAX_D 0xfe00707f
+#define MATCH_FMAX_H 0xcc000053
+#define MASK_FMAX_H 0xfe00707f
+#define MATCH_FMAX_S 0x28001053
+#define MASK_FMAX_S 0xfe00707f
+#define MATCH_FMIN_D 0x2a000053
+#define MASK_FMIN_D 0xfe00707f
+#define MATCH_FMIN_H 0xc4000053
+#define MASK_FMIN_H 0xfe00707f
+#define MATCH_FMIN_S 0x28000053
+#define MASK_FMIN_S 0xfe00707f
+#define MATCH_FMOVN 0x6007077
+#define MASK_FMOVN 0xfe00707f
+#define MATCH_FMOVZ 0x4007077
+#define MASK_FMOVZ 0xfe00707f
+#define MATCH_FMSUB_D 0x2000047
+#define MASK_FMSUB_D 0x600007f
+#define MATCH_FMSUB_H 0x4000047
+#define MASK_FMSUB_H 0x600007f
+#define MATCH_FMSUB_S 0x47
+#define MASK_FMSUB_S 0x600007f
+#define MATCH_FMUL_D 0x12000053
+#define MASK_FMUL_D 0xfe00007f
+#define MATCH_FMUL_H 0x14000053
+#define MASK_FMUL_H 0xfe00007f
+#define MATCH_FMUL_S 0x10000053
+#define MASK_FMUL_S 0xfe00007f
+#define MATCH_FMV_D_X 0xf2000053
+#define MASK_FMV_D_X 0xfff0707f
+#define MATCH_FMV_H_X 0xf4000053
+#define MASK_FMV_H_X 0xfff0707f
+#define MATCH_FMV_S_X 0xf0000053
+#define MASK_FMV_S_X 0xfff0707f
+#define MATCH_FMV_X_D 0xe2000053
+#define MASK_FMV_X_D 0xfff0707f
+#define MATCH_FMV_X_H 0xe4000053
+#define MASK_FMV_X_H 0xfff0707f
+#define MATCH_FMV_X_S 0xe0000053
+#define MASK_FMV_X_S 0xfff0707f
+#define MATCH_FNMADD_D 0x200004f
+#define MASK_FNMADD_D 0x600007f
+#define MATCH_FNMADD_H 0x400004f
+#define MASK_FNMADD_H 0x600007f
+#define MATCH_FNMADD_S 0x4f
+#define MASK_FNMADD_S 0x600007f
+#define MATCH_FNMSUB_D 0x200004b
+#define MASK_FNMSUB_D 0x600007f
+#define MATCH_FNMSUB_H 0x400004b
+#define MASK_FNMSUB_H 0x600007f
+#define MATCH_FNMSUB_S 0x4b
+#define MASK_FNMSUB_S 0x600007f
+#define MATCH_FRCSR 0x302073
+#define MASK_FRCSR 0xfffff07f
+#define MATCH_FRFLAGS 0x102073
+#define MASK_FRFLAGS 0xfffff07f
+#define MATCH_FRRM 0x202073
+#define MASK_FRRM 0xfffff07f
+#define MATCH_FSCSR 0x301073
+#define MASK_FSCSR 0xfff0707f
+#define MATCH_FSD 0x3027
+#define MASK_FSD 0x707f
+#define MATCH_FSFLAGS 0x101073
+#define MASK_FSFLAGS 0xfff0707f
+#define MATCH_FSFLAGSI 0x105073
+#define MASK_FSFLAGSI 0xfff0707f
+#define MATCH_FSGNJ_D 0x22000053
+#define MASK_FSGNJ_D 0xfe00707f
+#define MATCH_FSGNJ_H 0x2c000053
+#define MASK_FSGNJ_H 0xfe00707f
+#define MATCH_FSGNJ_S 0x20000053
+#define MASK_FSGNJ_S 0xfe00707f
+#define MATCH_FSGNJN_D 0x22001053
+#define MASK_FSGNJN_D 0xfe00707f
+#define MATCH_FSGNJN_H 0x34000053
+#define MASK_FSGNJN_H 0xfe00707f
+#define MATCH_FSGNJN_S 0x20001053
+#define MASK_FSGNJN_S 0xfe00707f
+#define MATCH_FSGNJX_D 0x22002053
+#define MASK_FSGNJX_D 0xfe00707f
+#define MATCH_FSGNJX_H 0x3c000053
+#define MASK_FSGNJX_H 0xfe00707f
+#define MATCH_FSGNJX_S 0x20002053
+#define MASK_FSGNJX_S 0xfe00707f
+#define MATCH_FSH 0x1027
+#define MASK_FSH 0x707f
+#define MATCH_FSQRT_D 0x5a000053
+#define MASK_FSQRT_D 0xfff0007f
+#define MATCH_FSQRT_H 0x24000053
+#define MASK_FSQRT_H 0xfff0007f
+#define MATCH_FSQRT_S 0x58000053
+#define MASK_FSQRT_S 0xfff0007f
+#define MATCH_FSRM 0x201073
+#define MASK_FSRM 0xfff0707f
+#define MATCH_FSRMI 0x205073
+#define MASK_FSRMI 0xfff0707f
+#define MATCH_FSUB_D 0xa000053
+#define MASK_FSUB_D 0xfe00007f
+#define MATCH_FSUB_H 0xc000053
+#define MASK_FSUB_H 0xfe00007f
+#define MATCH_FSUB_S 0x8000053
+#define MASK_FSUB_S 0xfe00007f
+#define MATCH_FSW 0x2027
+#define MASK_FSW 0x707f
+#define MATCH_HRTS 0x20500073
+#define MASK_HRTS 0xffffffff
+#define MATCH_JAL 0x6f
+#define MASK_JAL 0x7f
+#define MATCH_JALR 0x67
+#define MASK_JALR 0x707f
+#define MATCH_LB 0x3
+#define MASK_LB 0x707f
+#define MATCH_LBU 0x4003
+#define MASK_LBU 0x707f
+#define MATCH_LD 0x3003
+#define MASK_LD 0x707f
+#define MATCH_LH 0x1003
+#define MASK_LH 0x707f
+#define MATCH_LHU 0x5003
+#define MASK_LHU 0x707f
+#define MATCH_LR_D 0x1000302f
+#define MASK_LR_D 0xf9f0707f
+#define MATCH_LR_W 0x1000202f
+#define MASK_LR_W 0xf9f0707f
+#define MATCH_LUI 0x37
+#define MASK_LUI 0x7f
+#define MATCH_LW 0x2003
+#define MASK_LW 0x707f
+#define MATCH_LWU 0x6003
+#define MASK_LWU 0x707f
+#define MATCH_MOVN 0x2007077
+#define MASK_MOVN 0xfe00707f
+#define MATCH_MOVZ 0x7077
+#define MASK_MOVZ 0xfe00707f
+#define MATCH_MRTH 0x30600073
+#define MASK_MRTH 0xffffffff
+#define MATCH_MRTS 0x30500073
+#define MASK_MRTS 0xffffffff
+#define MATCH_MUL 0x2000033
+#define MASK_MUL 0xfe00707f
+#define MATCH_MULH 0x2001033
+#define MASK_MULH 0xfe00707f
+#define MATCH_MULHSU 0x2002033
+#define MASK_MULHSU 0xfe00707f
+#define MATCH_MULHU 0x2003033
+#define MASK_MULHU 0xfe00707f
+#define MATCH_MULW 0x200003b
+#define MASK_MULW 0xfe00707f
+#define MATCH_OR 0x6033
+#define MASK_OR 0xfe00707f
+#define MATCH_ORI 0x6013
+#define MASK_ORI 0x707f
+#define MATCH_RDCYCLE 0xc0002073
+#define MASK_RDCYCLE 0xfffff07f
+#define MATCH_RDCYCLEH 0xc8002073
+#define MASK_RDCYCLEH 0xfffff07f
+#define MATCH_RDINSTRET 0xc0202073
+#define MASK_RDINSTRET 0xfffff07f
+#define MATCH_RDINSTRETH 0xc8202073
+#define MASK_RDINSTRETH 0xfffff07f
+#define MATCH_RDTIME 0xc0102073
+#define MASK_RDTIME 0xfffff07f
+#define MATCH_RDTIMEH 0xc8102073
+#define MASK_RDTIMEH 0xfffff07f
+#define MATCH_REM 0x2006033
+#define MASK_REM 0xfe00707f
+#define MATCH_REMU 0x2007033
+#define MASK_REMU 0xfe00707f
+#define MATCH_REMUW 0x200703b
+#define MASK_REMUW 0xfe00707f
+#define MATCH_REMW 0x200603b
+#define MASK_REMW 0xfe00707f
+#define MATCH_SB 0x23
+#define MASK_SB 0x707f
+#define MATCH_SBREAK 0x100073
+#define MASK_SBREAK 0xffffffff
+#define MATCH_SC_D 0x1800302f
+#define MASK_SC_D 0xf800707f
+#define MATCH_SC_W 0x1800202f
+#define MASK_SC_W 0xf800707f
+#define MATCH_SCALL 0x73
+#define MASK_SCALL 0xffffffff
+#define MATCH_SD 0x3023
+#define MASK_SD 0x707f
+#define MATCH_SFENCE_VM 0x10100073
+#define MASK_SFENCE_VM 0xfff07fff
+#define MATCH_SH 0x1023
+#define MASK_SH 0x707f
+#define MATCH_SLL 0x1033
+#define MASK_SLL 0xfe00707f
+#define MATCH_SLLI 0x1013
+#define MASK_SLLI 0xfc00707f
+#define MATCH_SLLI_RV32 0x1013
+#define MASK_SLLI_RV32 0xfe00707f
+#define MATCH_SLLIW 0x101b
+#define MASK_SLLIW 0xfe00707f
+#define MATCH_SLLW 0x103b
+#define MASK_SLLW 0xfe00707f
+#define MATCH_SLT 0x2033
+#define MASK_SLT 0xfe00707f
+#define MATCH_SLTI 0x2013
+#define MASK_SLTI 0x707f
+#define MATCH_SLTIU 0x3013
+#define MASK_SLTIU 0x707f
+#define MATCH_SLTU 0x3033
+#define MASK_SLTU 0xfe00707f
+#define MATCH_SRA 0x40005033
+#define MASK_SRA 0xfe00707f
+#define MATCH_SRAI 0x40005013
+#define MASK_SRAI 0xfc00707f
+#define MATCH_SRAI_RV32 0x40005013
+#define MASK_SRAI_RV32 0xfe00707f
+#define MATCH_SRAIW 0x4000501b
+#define MASK_SRAIW 0xfe00707f
+#define MATCH_SRAW 0x4000503b
+#define MASK_SRAW 0xfe00707f
+#define MATCH_SRET 0x10000073
+#define MASK_SRET 0xffffffff
+#define MATCH_SRL 0x5033
+#define MASK_SRL 0xfe00707f
+#define MATCH_SRLI 0x5013
+#define MASK_SRLI 0xfc00707f
+#define MATCH_SRLI_RV32 0x5013
+#define MASK_SRLI_RV32 0xfe00707f
+#define MATCH_SRLIW 0x501b
+#define MASK_SRLIW 0xfe00707f
+#define MATCH_SRLW 0x503b
+#define MASK_SRLW 0xfe00707f
+#define MATCH_STOP 0x5077
+#define MASK_STOP 0xffffffff
+#define MATCH_SUB 0x40000033
+#define MASK_SUB 0xfe00707f
+#define MATCH_SUBW 0x4000003b
+#define MASK_SUBW 0xfe00707f
+#define MATCH_SW 0x2023
+#define MASK_SW 0x707f
+#define MATCH_UTIDX 0x6077
+#define MASK_UTIDX 0xfffff07f
+#define MATCH_VENQCMD 0xa00302b
+#define MASK_VENQCMD 0xfe007fff
+#define MATCH_VENQCNT 0x1000302b
+#define MASK_VENQCNT 0xfe007fff
+#define MATCH_VENQIMM1 0xc00302b
+#define MASK_VENQIMM1 0xfe007fff
+#define MATCH_VENQIMM2 0xe00302b
+#define MASK_VENQIMM2 0xfe007fff
+#define MATCH_VF 0x10202b
+#define MASK_VF 0x1f0707f
+#define MATCH_VFLD 0x1600205b
+#define MASK_VFLD 0xfff0707f
+#define MATCH_VFLSEGD 0x1600205b
+#define MASK_VFLSEGD 0x1ff0707f
+#define MATCH_VFLSEGSTD 0x1600305b
+#define MASK_VFLSEGSTD 0x1e00707f
+#define MATCH_VFLSEGSTW 0x1400305b
+#define MASK_VFLSEGSTW 0x1e00707f
+#define MATCH_VFLSEGW 0x1400205b
+#define MASK_VFLSEGW 0x1ff0707f
+#define MATCH_VFLSTD 0x1600305b
+#define MASK_VFLSTD 0xfe00707f
+#define MATCH_VFLSTW 0x1400305b
+#define MASK_VFLSTW 0xfe00707f
+#define MATCH_VFLW 0x1400205b
+#define MASK_VFLW 0xfff0707f
+#define MATCH_VFMSV_D 0x1200202b
+#define MASK_VFMSV_D 0xfff0707f
+#define MATCH_VFMSV_S 0x1000202b
+#define MASK_VFMSV_S 0xfff0707f
+#define MATCH_VFMVV 0x1000002b
+#define MASK_VFMVV 0xfff0707f
+#define MATCH_VFSD 0x1600207b
+#define MASK_VFSD 0xfff0707f
+#define MATCH_VFSSEGD 0x1600207b
+#define MASK_VFSSEGD 0x1ff0707f
+#define MATCH_VFSSEGSTD 0x1600307b
+#define MASK_VFSSEGSTD 0x1e00707f
+#define MATCH_VFSSEGSTW 0x1400307b
+#define MASK_VFSSEGSTW 0x1e00707f
+#define MATCH_VFSSEGW 0x1400207b
+#define MASK_VFSSEGW 0x1ff0707f
+#define MATCH_VFSSTD 0x1600307b
+#define MASK_VFSSTD 0xfe00707f
+#define MATCH_VFSSTW 0x1400307b
+#define MASK_VFSSTW 0xfe00707f
+#define MATCH_VFSW 0x1400207b
+#define MASK_VFSW 0xfff0707f
+#define MATCH_VGETCFG 0x400b
+#define MASK_VGETCFG 0xfffff07f
+#define MATCH_VGETVL 0x200400b
+#define MASK_VGETVL 0xfffff07f
+#define MATCH_VLB 0x205b
+#define MASK_VLB 0xfff0707f
+#define MATCH_VLBU 0x800205b
+#define MASK_VLBU 0xfff0707f
+#define MATCH_VLD 0x600205b
+#define MASK_VLD 0xfff0707f
+#define MATCH_VLH 0x200205b
+#define MASK_VLH 0xfff0707f
+#define MATCH_VLHU 0xa00205b
+#define MASK_VLHU 0xfff0707f
+#define MATCH_VLSEGB 0x205b
+#define MASK_VLSEGB 0x1ff0707f
+#define MATCH_VLSEGBU 0x800205b
+#define MASK_VLSEGBU 0x1ff0707f
+#define MATCH_VLSEGD 0x600205b
+#define MASK_VLSEGD 0x1ff0707f
+#define MATCH_VLSEGH 0x200205b
+#define MASK_VLSEGH 0x1ff0707f
+#define MATCH_VLSEGHU 0xa00205b
+#define MASK_VLSEGHU 0x1ff0707f
+#define MATCH_VLSEGSTB 0x305b
+#define MASK_VLSEGSTB 0x1e00707f
+#define MATCH_VLSEGSTBU 0x800305b
+#define MASK_VLSEGSTBU 0x1e00707f
+#define MATCH_VLSEGSTD 0x600305b
+#define MASK_VLSEGSTD 0x1e00707f
+#define MATCH_VLSEGSTH 0x200305b
+#define MASK_VLSEGSTH 0x1e00707f
+#define MATCH_VLSEGSTHU 0xa00305b
+#define MASK_VLSEGSTHU 0x1e00707f
+#define MATCH_VLSEGSTW 0x400305b
+#define MASK_VLSEGSTW 0x1e00707f
+#define MATCH_VLSEGSTWU 0xc00305b
+#define MASK_VLSEGSTWU 0x1e00707f
+#define MATCH_VLSEGW 0x400205b
+#define MASK_VLSEGW 0x1ff0707f
+#define MATCH_VLSEGWU 0xc00205b
+#define MASK_VLSEGWU 0x1ff0707f
+#define MATCH_VLSTB 0x305b
+#define MASK_VLSTB 0xfe00707f
+#define MATCH_VLSTBU 0x800305b
+#define MASK_VLSTBU 0xfe00707f
+#define MATCH_VLSTD 0x600305b
+#define MASK_VLSTD 0xfe00707f
+#define MATCH_VLSTH 0x200305b
+#define MASK_VLSTH 0xfe00707f
+#define MATCH_VLSTHU 0xa00305b
+#define MASK_VLSTHU 0xfe00707f
+#define MATCH_VLSTW 0x400305b
+#define MASK_VLSTW 0xfe00707f
+#define MATCH_VLSTWU 0xc00305b
+#define MASK_VLSTWU 0xfe00707f
+#define MATCH_VLW 0x400205b
+#define MASK_VLW 0xfff0707f
+#define MATCH_VLWU 0xc00205b
+#define MASK_VLWU 0xfff0707f
+#define MATCH_VMSV 0x200202b
+#define MASK_VMSV 0xfff0707f
+#define MATCH_VMVV 0x200002b
+#define MASK_VMVV 0xfff0707f
+#define MATCH_VSB 0x207b
+#define MASK_VSB 0xfff0707f
+#define MATCH_VSD 0x600207b
+#define MASK_VSD 0xfff0707f
+#define MATCH_VSETCFG 0x200b
+#define MASK_VSETCFG 0x7fff
+#define MATCH_VSETVL 0x600b
+#define MASK_VSETVL 0xfff0707f
+#define MATCH_VSH 0x200207b
+#define MASK_VSH 0xfff0707f
+#define MATCH_VSSEGB 0x207b
+#define MASK_VSSEGB 0x1ff0707f
+#define MATCH_VSSEGD 0x600207b
+#define MASK_VSSEGD 0x1ff0707f
+#define MATCH_VSSEGH 0x200207b
+#define MASK_VSSEGH 0x1ff0707f
+#define MATCH_VSSEGSTB 0x307b
+#define MASK_VSSEGSTB 0x1e00707f
+#define MATCH_VSSEGSTD 0x600307b
+#define MASK_VSSEGSTD 0x1e00707f
+#define MATCH_VSSEGSTH 0x200307b
+#define MASK_VSSEGSTH 0x1e00707f
+#define MATCH_VSSEGSTW 0x400307b
+#define MASK_VSSEGSTW 0x1e00707f
+#define MATCH_VSSEGW 0x400207b
+#define MASK_VSSEGW 0x1ff0707f
+#define MATCH_VSSTB 0x307b
+#define MASK_VSSTB 0xfe00707f
+#define MATCH_VSSTD 0x600307b
+#define MASK_VSSTD 0xfe00707f
+#define MATCH_VSSTH 0x200307b
+#define MASK_VSSTH 0xfe00707f
+#define MATCH_VSSTW 0x400307b
+#define MASK_VSSTW 0xfe00707f
+#define MATCH_VSW 0x400207b
+#define MASK_VSW 0xfff0707f
+#define MATCH_VXCPTAUX 0x200402b
+#define MASK_VXCPTAUX 0xfffff07f
+#define MATCH_VXCPTCAUSE 0x402b
+#define MASK_VXCPTCAUSE 0xfffff07f
+#define MATCH_VXCPTEVAC 0x600302b
+#define MASK_VXCPTEVAC 0xfff07fff
+#define MATCH_VXCPTHOLD 0x800302b
+#define MASK_VXCPTHOLD 0xfff07fff
+#define MATCH_VXCPTKILL 0x400302b
+#define MASK_VXCPTKILL 0xffffffff
+#define MATCH_VXCPTRESTORE 0x200302b
+#define MASK_VXCPTRESTORE 0xfff07fff
+#define MATCH_VXCPTSAVE 0x302b
+#define MASK_VXCPTSAVE 0xfff07fff
+#define MATCH_WFI 0x10200073
+#define MASK_WFI 0xffffffff
+#define MATCH_XOR 0x4033
+#define MASK_XOR 0xfe00707f
+#define MATCH_XORI 0x4013
+#define MASK_XORI 0x707f
+#define CSR_FFLAGS 0x1
+#define CSR_FRM 0x2
+#define CSR_FCSR 0x3
+#define CSR_CYCLE 0xc00
+#define CSR_TIME 0xc01
+#define CSR_INSTRET 0xc02
+#define CSR_STATS 0xc0
+#define CSR_UARCH0 0xcc0
+#define CSR_UARCH1 0xcc1
+#define CSR_UARCH2 0xcc2
+#define CSR_UARCH3 0xcc3
+#define CSR_UARCH4 0xcc4
+#define CSR_UARCH5 0xcc5
+#define CSR_UARCH6 0xcc6
+#define CSR_UARCH7 0xcc7
+#define CSR_UARCH8 0xcc8
+#define CSR_UARCH9 0xcc9
+#define CSR_UARCH10 0xcca
+#define CSR_UARCH11 0xccb
+#define CSR_UARCH12 0xccc
+#define CSR_UARCH13 0xccd
+#define CSR_UARCH14 0xcce
+#define CSR_UARCH15 0xccf
+#define CSR_SSTATUS 0x100
+#define CSR_STVEC 0x101
+#define CSR_SIE 0x104
+#define CSR_SSCRATCH 0x140
+#define CSR_SEPC 0x141
+#define CSR_SIP 0x144
+#define CSR_SPTBR 0x180
+#define CSR_SASID 0x181
+#define CSR_CYCLEW 0x900
+#define CSR_TIMEW 0x901
+#define CSR_INSTRETW 0x902
+#define CSR_STIME 0xd01
+#define CSR_SCAUSE 0xd42
+#define CSR_SBADADDR 0xd43
+#define CSR_STIMEW 0xa01
+#define CSR_MSTATUS 0x300
+#define CSR_MTVEC 0x301
+#define CSR_MTDELEG 0x302
+#define CSR_MIE 0x304
+#define CSR_MTIMECMP 0x321
+#define CSR_MSCRATCH 0x340
+#define CSR_MEPC 0x341
+#define CSR_MCAUSE 0x342
+#define CSR_MBADADDR 0x343
+#define CSR_MIP 0x344
+#define CSR_MTIME 0x701
+#define CSR_MCPUID 0xf00
+#define CSR_MIMPID 0xf01
+#define CSR_MHARTID 0xf10
+#define CSR_MTOHOST 0x780
+#define CSR_MFROMHOST 0x781
+#define CSR_MRESET 0x782
+#define CSR_SEND_IPI 0x783
+#define CSR_CYCLEH 0xc80
+#define CSR_TIMEH 0xc81
+#define CSR_INSTRETH 0xc82
+#define CSR_CYCLEHW 0x980
+#define CSR_TIMEHW 0x981
+#define CSR_INSTRETHW 0x982
+#define CSR_STIMEH 0xd81
+#define CSR_STIMEHW 0xa81
+#define CSR_MTIMECMPH 0x361
+#define CSR_MTIMEH 0x741
+#define CAUSE_MISALIGNED_FETCH 0x0
+#define CAUSE_FAULT_FETCH 0x1
+#define CAUSE_ILLEGAL_INSTRUCTION 0x2
+#define CAUSE_BREAKPOINT 0x3
+#define CAUSE_MISALIGNED_LOAD 0x4
+#define CAUSE_FAULT_LOAD 0x5
+#define CAUSE_MISALIGNED_STORE 0x6
+#define CAUSE_FAULT_STORE 0x7
+#define CAUSE_USER_ECALL 0x8
+#define CAUSE_SUPERVISOR_ECALL 0x9
+#define CAUSE_HYPERVISOR_ECALL 0xa
+#define CAUSE_MACHINE_ECALL 0xb
+#endif
+#ifdef DECLARE_INSN
+DECLARE_INSN(add, MATCH_ADD, MASK_ADD)
+DECLARE_INSN(addi, MATCH_ADDI, MASK_ADDI)
+DECLARE_INSN(addiw, MATCH_ADDIW, MASK_ADDIW)
+DECLARE_INSN(addw, MATCH_ADDW, MASK_ADDW)
+DECLARE_INSN(amoadd_d, MATCH_AMOADD_D, MASK_AMOADD_D)
+DECLARE_INSN(amoadd_w, MATCH_AMOADD_W, MASK_AMOADD_W)
+DECLARE_INSN(amoand_d, MATCH_AMOAND_D, MASK_AMOAND_D)
+DECLARE_INSN(amoand_w, MATCH_AMOAND_W, MASK_AMOAND_W)
+DECLARE_INSN(amomax_d, MATCH_AMOMAX_D, MASK_AMOMAX_D)
+DECLARE_INSN(amomax_w, MATCH_AMOMAX_W, MASK_AMOMAX_W)
+DECLARE_INSN(amomaxu_d, MATCH_AMOMAXU_D, MASK_AMOMAXU_D)
+DECLARE_INSN(amomaxu_w, MATCH_AMOMAXU_W, MASK_AMOMAXU_W)
+DECLARE_INSN(amomin_d, MATCH_AMOMIN_D, MASK_AMOMIN_D)
+DECLARE_INSN(amomin_w, MATCH_AMOMIN_W, MASK_AMOMIN_W)
+DECLARE_INSN(amominu_d, MATCH_AMOMINU_D, MASK_AMOMINU_D)
+DECLARE_INSN(amominu_w, MATCH_AMOMINU_W, MASK_AMOMINU_W)
+DECLARE_INSN(amoor_d, MATCH_AMOOR_D, MASK_AMOOR_D)
+DECLARE_INSN(amoor_w, MATCH_AMOOR_W, MASK_AMOOR_W)
+DECLARE_INSN(amoswap_d, MATCH_AMOSWAP_D, MASK_AMOSWAP_D)
+DECLARE_INSN(amoswap_w, MATCH_AMOSWAP_W, MASK_AMOSWAP_W)
+DECLARE_INSN(amoxor_d, MATCH_AMOXOR_D, MASK_AMOXOR_D)
+DECLARE_INSN(amoxor_w, MATCH_AMOXOR_W, MASK_AMOXOR_W)
+DECLARE_INSN(and, MATCH_AND, MASK_AND)
+DECLARE_INSN(andi, MATCH_ANDI, MASK_ANDI)
+DECLARE_INSN(auipc, MATCH_AUIPC, MASK_AUIPC)
+DECLARE_INSN(beq, MATCH_BEQ, MASK_BEQ)
+DECLARE_INSN(bge, MATCH_BGE, MASK_BGE)
+DECLARE_INSN(bgeu, MATCH_BGEU, MASK_BGEU)
+DECLARE_INSN(blt, MATCH_BLT, MASK_BLT)
+DECLARE_INSN(bltu, MATCH_BLTU, MASK_BLTU)
+DECLARE_INSN(bne, MATCH_BNE, MASK_BNE)
+DECLARE_INSN(c_add, MATCH_C_ADD, MASK_C_ADD)
+DECLARE_INSN(c_add3, MATCH_C_ADD3, MASK_C_ADD3)
+DECLARE_INSN(c_addi, MATCH_C_ADDI, MASK_C_ADDI)
+DECLARE_INSN(c_addi16sp, MATCH_C_ADDI16SP, MASK_C_ADDI16SP)
+DECLARE_INSN(c_addi4spn, MATCH_C_ADDI4SPN, MASK_C_ADDI4SPN)
+DECLARE_INSN(c_addin, MATCH_C_ADDIN, MASK_C_ADDIN)
+DECLARE_INSN(c_addiw, MATCH_C_ADDIW, MASK_C_ADDIW)
+DECLARE_INSN(c_addw, MATCH_C_ADDW, MASK_C_ADDW)
+DECLARE_INSN(c_and3, MATCH_C_AND3, MASK_C_AND3)
+DECLARE_INSN(c_andi, MATCH_C_ANDI, MASK_C_ANDI)
+DECLARE_INSN(c_andin, MATCH_C_ANDIN, MASK_C_ANDIN)
+DECLARE_INSN(c_beqz, MATCH_C_BEQZ, MASK_C_BEQZ)
+DECLARE_INSN(c_bgez, MATCH_C_BGEZ, MASK_C_BGEZ)
+DECLARE_INSN(c_bltz, MATCH_C_BLTZ, MASK_C_BLTZ)
+DECLARE_INSN(c_bnez, MATCH_C_BNEZ, MASK_C_BNEZ)
+DECLARE_INSN(c_ebreak, MATCH_C_EBREAK, MASK_C_EBREAK)
+DECLARE_INSN(c_j, MATCH_C_J, MASK_C_J)
+DECLARE_INSN(c_jal, MATCH_C_JAL, MASK_C_JAL)
+DECLARE_INSN(c_jalr, MATCH_C_JALR, MASK_C_JALR)
+DECLARE_INSN(c_jr, MATCH_C_JR, MASK_C_JR)
+DECLARE_INSN(c_ld, MATCH_C_LD, MASK_C_LD)
+DECLARE_INSN(c_ldsp, MATCH_C_LDSP, MASK_C_LDSP)
+DECLARE_INSN(c_li, MATCH_C_LI, MASK_C_LI)
+DECLARE_INSN(c_lui, MATCH_C_LUI, MASK_C_LUI)
+DECLARE_INSN(c_lw, MATCH_C_LW, MASK_C_LW)
+DECLARE_INSN(c_lwsp, MATCH_C_LWSP, MASK_C_LWSP)
+DECLARE_INSN(c_mv, MATCH_C_MV, MASK_C_MV)
+DECLARE_INSN(c_or3, MATCH_C_OR3, MASK_C_OR3)
+DECLARE_INSN(c_orin, MATCH_C_ORIN, MASK_C_ORIN)
+DECLARE_INSN(c_sd, MATCH_C_SD, MASK_C_SD)
+DECLARE_INSN(c_sdsp, MATCH_C_SDSP, MASK_C_SDSP)
+DECLARE_INSN(c_sll, MATCH_C_SLL, MASK_C_SLL)
+DECLARE_INSN(c_slli, MATCH_C_SLLI, MASK_C_SLLI)
+DECLARE_INSN(c_slliw, MATCH_C_SLLIW, MASK_C_SLLIW)
+DECLARE_INSN(c_sllr, MATCH_C_SLLR, MASK_C_SLLR)
+DECLARE_INSN(c_slt, MATCH_C_SLT, MASK_C_SLT)
+DECLARE_INSN(c_sltr, MATCH_C_SLTR, MASK_C_SLTR)
+DECLARE_INSN(c_sltu, MATCH_C_SLTU, MASK_C_SLTU)
+DECLARE_INSN(c_sltur, MATCH_C_SLTUR, MASK_C_SLTUR)
+DECLARE_INSN(c_sra, MATCH_C_SRA, MASK_C_SRA)
+DECLARE_INSN(c_srai, MATCH_C_SRAI, MASK_C_SRAI)
+DECLARE_INSN(c_srl, MATCH_C_SRL, MASK_C_SRL)
+DECLARE_INSN(c_srli, MATCH_C_SRLI, MASK_C_SRLI)
+DECLARE_INSN(c_srlr, MATCH_C_SRLR, MASK_C_SRLR)
+DECLARE_INSN(c_sub, MATCH_C_SUB, MASK_C_SUB)
+DECLARE_INSN(c_sub3, MATCH_C_SUB3, MASK_C_SUB3)
+DECLARE_INSN(c_sw, MATCH_C_SW, MASK_C_SW)
+DECLARE_INSN(c_swsp, MATCH_C_SWSP, MASK_C_SWSP)
+DECLARE_INSN(c_xor, MATCH_C_XOR, MASK_C_XOR)
+DECLARE_INSN(c_xorin, MATCH_C_XORIN, MASK_C_XORIN)
+DECLARE_INSN(csrrc, MATCH_CSRRC, MASK_CSRRC)
+DECLARE_INSN(csrrci, MATCH_CSRRCI, MASK_CSRRCI)
+DECLARE_INSN(csrrs, MATCH_CSRRS, MASK_CSRRS)
+DECLARE_INSN(csrrsi, MATCH_CSRRSI, MASK_CSRRSI)
+DECLARE_INSN(csrrw, MATCH_CSRRW, MASK_CSRRW)
+DECLARE_INSN(csrrwi, MATCH_CSRRWI, MASK_CSRRWI)
+DECLARE_INSN(custom0, MATCH_CUSTOM0, MASK_CUSTOM0)
+DECLARE_INSN(custom0_rd, MATCH_CUSTOM0_RD, MASK_CUSTOM0_RD)
+DECLARE_INSN(custom0_rd_rs1, MATCH_CUSTOM0_RD_RS1, MASK_CUSTOM0_RD_RS1)
+DECLARE_INSN(custom0_rd_rs1_rs2, MATCH_CUSTOM0_RD_RS1_RS2, MASK_CUSTOM0_RD_RS1_RS2)
+DECLARE_INSN(custom0_rs1, MATCH_CUSTOM0_RS1, MASK_CUSTOM0_RS1)
+DECLARE_INSN(custom0_rs1_rs2, MATCH_CUSTOM0_RS1_RS2, MASK_CUSTOM0_RS1_RS2)
+DECLARE_INSN(custom1, MATCH_CUSTOM1, MASK_CUSTOM1)
+DECLARE_INSN(custom1_rd, MATCH_CUSTOM1_RD, MASK_CUSTOM1_RD)
+DECLARE_INSN(custom1_rd_rs1, MATCH_CUSTOM1_RD_RS1, MASK_CUSTOM1_RD_RS1)
+DECLARE_INSN(custom1_rd_rs1_rs2, MATCH_CUSTOM1_RD_RS1_RS2, MASK_CUSTOM1_RD_RS1_RS2)
+DECLARE_INSN(custom1_rs1, MATCH_CUSTOM1_RS1, MASK_CUSTOM1_RS1)
+DECLARE_INSN(custom1_rs1_rs2, MATCH_CUSTOM1_RS1_RS2, MASK_CUSTOM1_RS1_RS2)
+DECLARE_INSN(custom2, MATCH_CUSTOM2, MASK_CUSTOM2)
+DECLARE_INSN(custom2_rd, MATCH_CUSTOM2_RD, MASK_CUSTOM2_RD)
+DECLARE_INSN(custom2_rd_rs1, MATCH_CUSTOM2_RD_RS1, MASK_CUSTOM2_RD_RS1)
+DECLARE_INSN(custom2_rd_rs1_rs2, MATCH_CUSTOM2_RD_RS1_RS2, MASK_CUSTOM2_RD_RS1_RS2)
+DECLARE_INSN(custom2_rs1, MATCH_CUSTOM2_RS1, MASK_CUSTOM2_RS1)
+DECLARE_INSN(custom2_rs1_rs2, MATCH_CUSTOM2_RS1_RS2, MASK_CUSTOM2_RS1_RS2)
+DECLARE_INSN(custom3, MATCH_CUSTOM3, MASK_CUSTOM3)
+DECLARE_INSN(custom3_rd, MATCH_CUSTOM3_RD, MASK_CUSTOM3_RD)
+DECLARE_INSN(custom3_rd_rs1, MATCH_CUSTOM3_RD_RS1, MASK_CUSTOM3_RD_RS1)
+DECLARE_INSN(custom3_rd_rs1_rs2, MATCH_CUSTOM3_RD_RS1_RS2, MASK_CUSTOM3_RD_RS1_RS2)
+DECLARE_INSN(custom3_rs1, MATCH_CUSTOM3_RS1, MASK_CUSTOM3_RS1)
+DECLARE_INSN(custom3_rs1_rs2, MATCH_CUSTOM3_RS1_RS2, MASK_CUSTOM3_RS1_RS2)
+DECLARE_INSN(div, MATCH_DIV, MASK_DIV)
+DECLARE_INSN(divu, MATCH_DIVU, MASK_DIVU)
+DECLARE_INSN(divuw, MATCH_DIVUW, MASK_DIVUW)
+DECLARE_INSN(divw, MATCH_DIVW, MASK_DIVW)
+DECLARE_INSN(ebreak, MATCH_EBREAK, MASK_EBREAK)
+DECLARE_INSN(ecall, MATCH_ECALL, MASK_ECALL)
+DECLARE_INSN(eret, MATCH_ERET, MASK_ERET)
+DECLARE_INSN(fadd_d, MATCH_FADD_D, MASK_FADD_D)
+DECLARE_INSN(fadd_h, MATCH_FADD_H, MASK_FADD_H)
+DECLARE_INSN(fadd_s, MATCH_FADD_S, MASK_FADD_S)
+DECLARE_INSN(fclass_d, MATCH_FCLASS_D, MASK_FCLASS_D)
+DECLARE_INSN(fclass_s, MATCH_FCLASS_S, MASK_FCLASS_S)
+DECLARE_INSN(fcvt_d_h, MATCH_FCVT_D_H, MASK_FCVT_D_H)
+DECLARE_INSN(fcvt_d_l, MATCH_FCVT_D_L, MASK_FCVT_D_L)
+DECLARE_INSN(fcvt_d_lu, MATCH_FCVT_D_LU, MASK_FCVT_D_LU)
+DECLARE_INSN(fcvt_d_s, MATCH_FCVT_D_S, MASK_FCVT_D_S)
+DECLARE_INSN(fcvt_d_w, MATCH_FCVT_D_W, MASK_FCVT_D_W)
+DECLARE_INSN(fcvt_d_wu, MATCH_FCVT_D_WU, MASK_FCVT_D_WU)
+DECLARE_INSN(fcvt_h_d, MATCH_FCVT_H_D, MASK_FCVT_H_D)
+DECLARE_INSN(fcvt_h_l, MATCH_FCVT_H_L, MASK_FCVT_H_L)
+DECLARE_INSN(fcvt_h_lu, MATCH_FCVT_H_LU, MASK_FCVT_H_LU)
+DECLARE_INSN(fcvt_h_s, MATCH_FCVT_H_S, MASK_FCVT_H_S)
+DECLARE_INSN(fcvt_h_w, MATCH_FCVT_H_W, MASK_FCVT_H_W)
+DECLARE_INSN(fcvt_h_wu, MATCH_FCVT_H_WU, MASK_FCVT_H_WU)
+DECLARE_INSN(fcvt_l_d, MATCH_FCVT_L_D, MASK_FCVT_L_D)
+DECLARE_INSN(fcvt_l_h, MATCH_FCVT_L_H, MASK_FCVT_L_H)
+DECLARE_INSN(fcvt_l_s, MATCH_FCVT_L_S, MASK_FCVT_L_S)
+DECLARE_INSN(fcvt_lu_d, MATCH_FCVT_LU_D, MASK_FCVT_LU_D)
+DECLARE_INSN(fcvt_lu_h, MATCH_FCVT_LU_H, MASK_FCVT_LU_H)
+DECLARE_INSN(fcvt_lu_s, MATCH_FCVT_LU_S, MASK_FCVT_LU_S)
+DECLARE_INSN(fcvt_s_d, MATCH_FCVT_S_D, MASK_FCVT_S_D)
+DECLARE_INSN(fcvt_s_h, MATCH_FCVT_S_H, MASK_FCVT_S_H)
+DECLARE_INSN(fcvt_s_l, MATCH_FCVT_S_L, MASK_FCVT_S_L)
+DECLARE_INSN(fcvt_s_lu, MATCH_FCVT_S_LU, MASK_FCVT_S_LU)
+DECLARE_INSN(fcvt_s_w, MATCH_FCVT_S_W, MASK_FCVT_S_W)
+DECLARE_INSN(fcvt_s_wu, MATCH_FCVT_S_WU, MASK_FCVT_S_WU)
+DECLARE_INSN(fcvt_w_d, MATCH_FCVT_W_D, MASK_FCVT_W_D)
+DECLARE_INSN(fcvt_w_h, MATCH_FCVT_W_H, MASK_FCVT_W_H)
+DECLARE_INSN(fcvt_w_s, MATCH_FCVT_W_S, MASK_FCVT_W_S)
+DECLARE_INSN(fcvt_wu_d, MATCH_FCVT_WU_D, MASK_FCVT_WU_D)
+DECLARE_INSN(fcvt_wu_h, MATCH_FCVT_WU_H, MASK_FCVT_WU_H)
+DECLARE_INSN(fcvt_wu_s, MATCH_FCVT_WU_S, MASK_FCVT_WU_S)
+DECLARE_INSN(fdiv_d, MATCH_FDIV_D, MASK_FDIV_D)
+DECLARE_INSN(fdiv_h, MATCH_FDIV_H, MASK_FDIV_H)
+DECLARE_INSN(fdiv_s, MATCH_FDIV_S, MASK_FDIV_S)
+DECLARE_INSN(fence, MATCH_FENCE, MASK_FENCE)
+DECLARE_INSN(fence_i, MATCH_FENCE_I, MASK_FENCE_I)
+DECLARE_INSN(feq_d, MATCH_FEQ_D, MASK_FEQ_D)
+DECLARE_INSN(feq_h, MATCH_FEQ_H, MASK_FEQ_H)
+DECLARE_INSN(feq_s, MATCH_FEQ_S, MASK_FEQ_S)
+DECLARE_INSN(fld, MATCH_FLD, MASK_FLD)
+DECLARE_INSN(fle_d, MATCH_FLE_D, MASK_FLE_D)
+DECLARE_INSN(fle_h, MATCH_FLE_H, MASK_FLE_H)
+DECLARE_INSN(fle_s, MATCH_FLE_S, MASK_FLE_S)
+DECLARE_INSN(flh, MATCH_FLH, MASK_FLH)
+DECLARE_INSN(flt_d, MATCH_FLT_D, MASK_FLT_D)
+DECLARE_INSN(flt_h, MATCH_FLT_H, MASK_FLT_H)
+DECLARE_INSN(flt_s, MATCH_FLT_S, MASK_FLT_S)
+DECLARE_INSN(flw, MATCH_FLW, MASK_FLW)
+DECLARE_INSN(fmadd_d, MATCH_FMADD_D, MASK_FMADD_D)
+DECLARE_INSN(fmadd_h, MATCH_FMADD_H, MASK_FMADD_H)
+DECLARE_INSN(fmadd_s, MATCH_FMADD_S, MASK_FMADD_S)
+DECLARE_INSN(fmax_d, MATCH_FMAX_D, MASK_FMAX_D)
+DECLARE_INSN(fmax_h, MATCH_FMAX_H, MASK_FMAX_H)
+DECLARE_INSN(fmax_s, MATCH_FMAX_S, MASK_FMAX_S)
+DECLARE_INSN(fmin_d, MATCH_FMIN_D, MASK_FMIN_D)
+DECLARE_INSN(fmin_h, MATCH_FMIN_H, MASK_FMIN_H)
+DECLARE_INSN(fmin_s, MATCH_FMIN_S, MASK_FMIN_S)
+DECLARE_INSN(fmovn, MATCH_FMOVN, MASK_FMOVN)
+DECLARE_INSN(fmovz, MATCH_FMOVZ, MASK_FMOVZ)
+DECLARE_INSN(fmsub_d, MATCH_FMSUB_D, MASK_FMSUB_D)
+DECLARE_INSN(fmsub_h, MATCH_FMSUB_H, MASK_FMSUB_H)
+DECLARE_INSN(fmsub_s, MATCH_FMSUB_S, MASK_FMSUB_S)
+DECLARE_INSN(fmul_d, MATCH_FMUL_D, MASK_FMUL_D)
+DECLARE_INSN(fmul_h, MATCH_FMUL_H, MASK_FMUL_H)
+DECLARE_INSN(fmul_s, MATCH_FMUL_S, MASK_FMUL_S)
+DECLARE_INSN(fmv_d_x, MATCH_FMV_D_X, MASK_FMV_D_X)
+DECLARE_INSN(fmv_h_x, MATCH_FMV_H_X, MASK_FMV_H_X)
+DECLARE_INSN(fmv_s_x, MATCH_FMV_S_X, MASK_FMV_S_X)
+DECLARE_INSN(fmv_x_d, MATCH_FMV_X_D, MASK_FMV_X_D)
+DECLARE_INSN(fmv_x_h, MATCH_FMV_X_H, MASK_FMV_X_H)
+DECLARE_INSN(fmv_x_s, MATCH_FMV_X_S, MASK_FMV_X_S)
+DECLARE_INSN(fnmadd_d, MATCH_FNMADD_D, MASK_FNMADD_D)
+DECLARE_INSN(fnmadd_h, MATCH_FNMADD_H, MASK_FNMADD_H)
+DECLARE_INSN(fnmadd_s, MATCH_FNMADD_S, MASK_FNMADD_S)
+DECLARE_INSN(fnmsub_d, MATCH_FNMSUB_D, MASK_FNMSUB_D)
+DECLARE_INSN(fnmsub_h, MATCH_FNMSUB_H, MASK_FNMSUB_H)
+DECLARE_INSN(fnmsub_s, MATCH_FNMSUB_S, MASK_FNMSUB_S)
+DECLARE_INSN(frcsr, MATCH_FRCSR, MASK_FRCSR)
+DECLARE_INSN(frflags, MATCH_FRFLAGS, MASK_FRFLAGS)
+DECLARE_INSN(frrm, MATCH_FRRM, MASK_FRRM)
+DECLARE_INSN(fscsr, MATCH_FSCSR, MASK_FSCSR)
+DECLARE_INSN(fsd, MATCH_FSD, MASK_FSD)
+DECLARE_INSN(fsflags, MATCH_FSFLAGS, MASK_FSFLAGS)
+DECLARE_INSN(fsflagsi, MATCH_FSFLAGSI, MASK_FSFLAGSI)
+DECLARE_INSN(fsgnj_d, MATCH_FSGNJ_D, MASK_FSGNJ_D)
+DECLARE_INSN(fsgnj_h, MATCH_FSGNJ_H, MASK_FSGNJ_H)
+DECLARE_INSN(fsgnj_s, MATCH_FSGNJ_S, MASK_FSGNJ_S)
+DECLARE_INSN(fsgnjn_d, MATCH_FSGNJN_D, MASK_FSGNJN_D)
+DECLARE_INSN(fsgnjn_h, MATCH_FSGNJN_H, MASK_FSGNJN_H)
+DECLARE_INSN(fsgnjn_s, MATCH_FSGNJN_S, MASK_FSGNJN_S)
+DECLARE_INSN(fsgnjx_d, MATCH_FSGNJX_D, MASK_FSGNJX_D)
+DECLARE_INSN(fsgnjx_h, MATCH_FSGNJX_H, MASK_FSGNJX_H)
+DECLARE_INSN(fsgnjx_s, MATCH_FSGNJX_S, MASK_FSGNJX_S)
+DECLARE_INSN(fsh, MATCH_FSH, MASK_FSH)
+DECLARE_INSN(fsqrt_d, MATCH_FSQRT_D, MASK_FSQRT_D)
+DECLARE_INSN(fsqrt_h, MATCH_FSQRT_H, MASK_FSQRT_H)
+DECLARE_INSN(fsqrt_s, MATCH_FSQRT_S, MASK_FSQRT_S)
+DECLARE_INSN(fsrm, MATCH_FSRM, MASK_FSRM)
+DECLARE_INSN(fsrmi, MATCH_FSRMI, MASK_FSRMI)
+DECLARE_INSN(fsub_d, MATCH_FSUB_D, MASK_FSUB_D)
+DECLARE_INSN(fsub_h, MATCH_FSUB_H, MASK_FSUB_H)
+DECLARE_INSN(fsub_s, MATCH_FSUB_S, MASK_FSUB_S)
+DECLARE_INSN(fsw, MATCH_FSW, MASK_FSW)
+DECLARE_INSN(hrts, MATCH_HRTS, MASK_HRTS)
+DECLARE_INSN(jal, MATCH_JAL, MASK_JAL)
+DECLARE_INSN(jalr, MATCH_JALR, MASK_JALR)
+DECLARE_INSN(lb, MATCH_LB, MASK_LB)
+DECLARE_INSN(lbu, MATCH_LBU, MASK_LBU)
+DECLARE_INSN(ld, MATCH_LD, MASK_LD)
+DECLARE_INSN(lh, MATCH_LH, MASK_LH)
+DECLARE_INSN(lhu, MATCH_LHU, MASK_LHU)
+DECLARE_INSN(lr_d, MATCH_LR_D, MASK_LR_D)
+DECLARE_INSN(lr_w, MATCH_LR_W, MASK_LR_W)
+DECLARE_INSN(lui, MATCH_LUI, MASK_LUI)
+DECLARE_INSN(lw, MATCH_LW, MASK_LW)
+DECLARE_INSN(lwu, MATCH_LWU, MASK_LWU)
+DECLARE_INSN(movn, MATCH_MOVN, MASK_MOVN)
+DECLARE_INSN(movz, MATCH_MOVZ, MASK_MOVZ)
+DECLARE_INSN(mrth, MATCH_MRTH, MASK_MRTH)
+DECLARE_INSN(mrts, MATCH_MRTS, MASK_MRTS)
+DECLARE_INSN(mul, MATCH_MUL, MASK_MUL)
+DECLARE_INSN(mulh, MATCH_MULH, MASK_MULH)
+DECLARE_INSN(mulhsu, MATCH_MULHSU, MASK_MULHSU)
+DECLARE_INSN(mulhu, MATCH_MULHU, MASK_MULHU)
+DECLARE_INSN(mulw, MATCH_MULW, MASK_MULW)
+DECLARE_INSN(or, MATCH_OR, MASK_OR)
+DECLARE_INSN(ori, MATCH_ORI, MASK_ORI)
+DECLARE_INSN(rdcycle, MATCH_RDCYCLE, MASK_RDCYCLE)
+DECLARE_INSN(rdcycleh, MATCH_RDCYCLEH, MASK_RDCYCLEH)
+DECLARE_INSN(rdinstret, MATCH_RDINSTRET, MASK_RDINSTRET)
+DECLARE_INSN(rdinstreth, MATCH_RDINSTRETH, MASK_RDINSTRETH)
+DECLARE_INSN(rdtime, MATCH_RDTIME, MASK_RDTIME)
+DECLARE_INSN(rdtimeh, MATCH_RDTIMEH, MASK_RDTIMEH)
+DECLARE_INSN(rem, MATCH_REM, MASK_REM)
+DECLARE_INSN(remu, MATCH_REMU, MASK_REMU)
+DECLARE_INSN(remuw, MATCH_REMUW, MASK_REMUW)
+DECLARE_INSN(remw, MATCH_REMW, MASK_REMW)
+DECLARE_INSN(sb, MATCH_SB, MASK_SB)
+DECLARE_INSN(sbreak, MATCH_SBREAK, MASK_SBREAK)
+DECLARE_INSN(sc_d, MATCH_SC_D, MASK_SC_D)
+DECLARE_INSN(sc_w, MATCH_SC_W, MASK_SC_W)
+DECLARE_INSN(scall, MATCH_SCALL, MASK_SCALL)
+DECLARE_INSN(sd, MATCH_SD, MASK_SD)
+DECLARE_INSN(sfence_vm, MATCH_SFENCE_VM, MASK_SFENCE_VM)
+DECLARE_INSN(sh, MATCH_SH, MASK_SH)
+DECLARE_INSN(sll, MATCH_SLL, MASK_SLL)
+DECLARE_INSN(slli, MATCH_SLLI, MASK_SLLI)
+DECLARE_INSN(slli_rv32, MATCH_SLLI_RV32, MASK_SLLI_RV32)
+DECLARE_INSN(slliw, MATCH_SLLIW, MASK_SLLIW)
+DECLARE_INSN(sllw, MATCH_SLLW, MASK_SLLW)
+DECLARE_INSN(slt, MATCH_SLT, MASK_SLT)
+DECLARE_INSN(slti, MATCH_SLTI, MASK_SLTI)
+DECLARE_INSN(sltiu, MATCH_SLTIU, MASK_SLTIU)
+DECLARE_INSN(sltu, MATCH_SLTU, MASK_SLTU)
+DECLARE_INSN(sra, MATCH_SRA, MASK_SRA)
+DECLARE_INSN(srai, MATCH_SRAI, MASK_SRAI)
+DECLARE_INSN(srai_rv32, MATCH_SRAI_RV32, MASK_SRAI_RV32)
+DECLARE_INSN(sraiw, MATCH_SRAIW, MASK_SRAIW)
+DECLARE_INSN(sraw, MATCH_SRAW, MASK_SRAW)
+DECLARE_INSN(sret, MATCH_SRET, MASK_SRET)
+DECLARE_INSN(srl, MATCH_SRL, MASK_SRL)
+DECLARE_INSN(srli, MATCH_SRLI, MASK_SRLI)
+DECLARE_INSN(srli_rv32, MATCH_SRLI_RV32, MASK_SRLI_RV32)
+DECLARE_INSN(srliw, MATCH_SRLIW, MASK_SRLIW)
+DECLARE_INSN(srlw, MATCH_SRLW, MASK_SRLW)
+DECLARE_INSN(stop, MATCH_STOP, MASK_STOP)
+DECLARE_INSN(sub, MATCH_SUB, MASK_SUB)
+DECLARE_INSN(subw, MATCH_SUBW, MASK_SUBW)
+DECLARE_INSN(sw, MATCH_SW, MASK_SW)
+DECLARE_INSN(utidx, MATCH_UTIDX, MASK_UTIDX)
+DECLARE_INSN(venqcmd, MATCH_VENQCMD, MASK_VENQCMD)
+DECLARE_INSN(venqcnt, MATCH_VENQCNT, MASK_VENQCNT)
+DECLARE_INSN(venqimm1, MATCH_VENQIMM1, MASK_VENQIMM1)
+DECLARE_INSN(venqimm2, MATCH_VENQIMM2, MASK_VENQIMM2)
+DECLARE_INSN(vf, MATCH_VF, MASK_VF)
+DECLARE_INSN(vfld, MATCH_VFLD, MASK_VFLD)
+DECLARE_INSN(vflsegd, MATCH_VFLSEGD, MASK_VFLSEGD)
+DECLARE_INSN(vflsegstd, MATCH_VFLSEGSTD, MASK_VFLSEGSTD)
+DECLARE_INSN(vflsegstw, MATCH_VFLSEGSTW, MASK_VFLSEGSTW)
+DECLARE_INSN(vflsegw, MATCH_VFLSEGW, MASK_VFLSEGW)
+DECLARE_INSN(vflstd, MATCH_VFLSTD, MASK_VFLSTD)
+DECLARE_INSN(vflstw, MATCH_VFLSTW, MASK_VFLSTW)
+DECLARE_INSN(vflw, MATCH_VFLW, MASK_VFLW)
+DECLARE_INSN(vfmsv_d, MATCH_VFMSV_D, MASK_VFMSV_D)
+DECLARE_INSN(vfmsv_s, MATCH_VFMSV_S, MASK_VFMSV_S)
+DECLARE_INSN(vfmvv, MATCH_VFMVV, MASK_VFMVV)
+DECLARE_INSN(vfsd, MATCH_VFSD, MASK_VFSD)
+DECLARE_INSN(vfssegd, MATCH_VFSSEGD, MASK_VFSSEGD)
+DECLARE_INSN(vfssegstd, MATCH_VFSSEGSTD, MASK_VFSSEGSTD)
+DECLARE_INSN(vfssegstw, MATCH_VFSSEGSTW, MASK_VFSSEGSTW)
+DECLARE_INSN(vfssegw, MATCH_VFSSEGW, MASK_VFSSEGW)
+DECLARE_INSN(vfsstd, MATCH_VFSSTD, MASK_VFSSTD)
+DECLARE_INSN(vfsstw, MATCH_VFSSTW, MASK_VFSSTW)
+DECLARE_INSN(vfsw, MATCH_VFSW, MASK_VFSW)
+DECLARE_INSN(vgetcfg, MATCH_VGETCFG, MASK_VGETCFG)
+DECLARE_INSN(vgetvl, MATCH_VGETVL, MASK_VGETVL)
+DECLARE_INSN(vlb, MATCH_VLB, MASK_VLB)
+DECLARE_INSN(vlbu, MATCH_VLBU, MASK_VLBU)
+DECLARE_INSN(vld, MATCH_VLD, MASK_VLD)
+DECLARE_INSN(vlh, MATCH_VLH, MASK_VLH)
+DECLARE_INSN(vlhu, MATCH_VLHU, MASK_VLHU)
+DECLARE_INSN(vlsegb, MATCH_VLSEGB, MASK_VLSEGB)
+DECLARE_INSN(vlsegbu, MATCH_VLSEGBU, MASK_VLSEGBU)
+DECLARE_INSN(vlsegd, MATCH_VLSEGD, MASK_VLSEGD)
+DECLARE_INSN(vlsegh, MATCH_VLSEGH, MASK_VLSEGH)
+DECLARE_INSN(vlseghu, MATCH_VLSEGHU, MASK_VLSEGHU)
+DECLARE_INSN(vlsegstb, MATCH_VLSEGSTB, MASK_VLSEGSTB)
+DECLARE_INSN(vlsegstbu, MATCH_VLSEGSTBU, MASK_VLSEGSTBU)
+DECLARE_INSN(vlsegstd, MATCH_VLSEGSTD, MASK_VLSEGSTD)
+DECLARE_INSN(vlsegsth, MATCH_VLSEGSTH, MASK_VLSEGSTH)
+DECLARE_INSN(vlsegsthu, MATCH_VLSEGSTHU, MASK_VLSEGSTHU)
+DECLARE_INSN(vlsegstw, MATCH_VLSEGSTW, MASK_VLSEGSTW)
+DECLARE_INSN(vlsegstwu, MATCH_VLSEGSTWU, MASK_VLSEGSTWU)
+DECLARE_INSN(vlsegw, MATCH_VLSEGW, MASK_VLSEGW)
+DECLARE_INSN(vlsegwu, MATCH_VLSEGWU, MASK_VLSEGWU)
+DECLARE_INSN(vlstb, MATCH_VLSTB, MASK_VLSTB)
+DECLARE_INSN(vlstbu, MATCH_VLSTBU, MASK_VLSTBU)
+DECLARE_INSN(vlstd, MATCH_VLSTD, MASK_VLSTD)
+DECLARE_INSN(vlsth, MATCH_VLSTH, MASK_VLSTH)
+DECLARE_INSN(vlsthu, MATCH_VLSTHU, MASK_VLSTHU)
+DECLARE_INSN(vlstw, MATCH_VLSTW, MASK_VLSTW)
+DECLARE_INSN(vlstwu, MATCH_VLSTWU, MASK_VLSTWU)
+DECLARE_INSN(vlw, MATCH_VLW, MASK_VLW)
+DECLARE_INSN(vlwu, MATCH_VLWU, MASK_VLWU)
+DECLARE_INSN(vmsv, MATCH_VMSV, MASK_VMSV)
+DECLARE_INSN(vmvv, MATCH_VMVV, MASK_VMVV)
+DECLARE_INSN(vsb, MATCH_VSB, MASK_VSB)
+DECLARE_INSN(vsd, MATCH_VSD, MASK_VSD)
+DECLARE_INSN(vsetcfg, MATCH_VSETCFG, MASK_VSETCFG)
+DECLARE_INSN(vsetvl, MATCH_VSETVL, MASK_VSETVL)
+DECLARE_INSN(vsh, MATCH_VSH, MASK_VSH)
+DECLARE_INSN(vssegb, MATCH_VSSEGB, MASK_VSSEGB)
+DECLARE_INSN(vssegd, MATCH_VSSEGD, MASK_VSSEGD)
+DECLARE_INSN(vssegh, MATCH_VSSEGH, MASK_VSSEGH)
+DECLARE_INSN(vssegstb, MATCH_VSSEGSTB, MASK_VSSEGSTB)
+DECLARE_INSN(vssegstd, MATCH_VSSEGSTD, MASK_VSSEGSTD)
+DECLARE_INSN(vssegsth, MATCH_VSSEGSTH, MASK_VSSEGSTH)
+DECLARE_INSN(vssegstw, MATCH_VSSEGSTW, MASK_VSSEGSTW)
+DECLARE_INSN(vssegw, MATCH_VSSEGW, MASK_VSSEGW)
+DECLARE_INSN(vsstb, MATCH_VSSTB, MASK_VSSTB)
+DECLARE_INSN(vsstd, MATCH_VSSTD, MASK_VSSTD)
+DECLARE_INSN(vssth, MATCH_VSSTH, MASK_VSSTH)
+DECLARE_INSN(vsstw, MATCH_VSSTW, MASK_VSSTW)
+DECLARE_INSN(vsw, MATCH_VSW, MASK_VSW)
+DECLARE_INSN(vxcptaux, MATCH_VXCPTAUX, MASK_VXCPTAUX)
+DECLARE_INSN(vxcptcause, MATCH_VXCPTCAUSE, MASK_VXCPTCAUSE)
+DECLARE_INSN(vxcptevac, MATCH_VXCPTEVAC, MASK_VXCPTEVAC)
+DECLARE_INSN(vxcpthold, MATCH_VXCPTHOLD, MASK_VXCPTHOLD)
+DECLARE_INSN(vxcptkill, MATCH_VXCPTKILL, MASK_VXCPTKILL)
+DECLARE_INSN(vxcptrestore, MATCH_VXCPTRESTORE, MASK_VXCPTRESTORE)
+DECLARE_INSN(vxcptsave, MATCH_VXCPTSAVE, MASK_VXCPTSAVE)
+DECLARE_INSN(wfi, MATCH_WFI, MASK_WFI)
+DECLARE_INSN(xor, MATCH_XOR, MASK_XOR)
+DECLARE_INSN(xori, MATCH_XORI, MASK_XORI)
+#endif
+#ifdef DECLARE_CSR
+DECLARE_CSR(fflags, CSR_FFLAGS)
+DECLARE_CSR(frm, CSR_FRM)
+DECLARE_CSR(fcsr, CSR_FCSR)
+DECLARE_CSR(cycle, CSR_CYCLE)
+DECLARE_CSR(time, CSR_TIME)
+DECLARE_CSR(instret, CSR_INSTRET)
+DECLARE_CSR(stats, CSR_STATS)
+DECLARE_CSR(uarch0, CSR_UARCH0)
+DECLARE_CSR(uarch1, CSR_UARCH1)
+DECLARE_CSR(uarch2, CSR_UARCH2)
+DECLARE_CSR(uarch3, CSR_UARCH3)
+DECLARE_CSR(uarch4, CSR_UARCH4)
+DECLARE_CSR(uarch5, CSR_UARCH5)
+DECLARE_CSR(uarch6, CSR_UARCH6)
+DECLARE_CSR(uarch7, CSR_UARCH7)
+DECLARE_CSR(uarch8, CSR_UARCH8)
+DECLARE_CSR(uarch9, CSR_UARCH9)
+DECLARE_CSR(uarch10, CSR_UARCH10)
+DECLARE_CSR(uarch11, CSR_UARCH11)
+DECLARE_CSR(uarch12, CSR_UARCH12)
+DECLARE_CSR(uarch13, CSR_UARCH13)
+DECLARE_CSR(uarch14, CSR_UARCH14)
+DECLARE_CSR(uarch15, CSR_UARCH15)
+DECLARE_CSR(sstatus, CSR_SSTATUS)
+DECLARE_CSR(stvec, CSR_STVEC)
+DECLARE_CSR(sie, CSR_SIE)
+DECLARE_CSR(sscratch, CSR_SSCRATCH)
+DECLARE_CSR(sepc, CSR_SEPC)
+DECLARE_CSR(sip, CSR_SIP)
+DECLARE_CSR(sptbr, CSR_SPTBR)
+DECLARE_CSR(sasid, CSR_SASID)
+DECLARE_CSR(cyclew, CSR_CYCLEW)
+DECLARE_CSR(timew, CSR_TIMEW)
+DECLARE_CSR(instretw, CSR_INSTRETW)
+DECLARE_CSR(stime, CSR_STIME)
+DECLARE_CSR(scause, CSR_SCAUSE)
+DECLARE_CSR(sbadaddr, CSR_SBADADDR)
+DECLARE_CSR(stimew, CSR_STIMEW)
+DECLARE_CSR(mstatus, CSR_MSTATUS)
+DECLARE_CSR(mtvec, CSR_MTVEC)
+DECLARE_CSR(mtdeleg, CSR_MTDELEG)
+DECLARE_CSR(mie, CSR_MIE)
+DECLARE_CSR(mtimecmp, CSR_MTIMECMP)
+DECLARE_CSR(mscratch, CSR_MSCRATCH)
+DECLARE_CSR(mepc, CSR_MEPC)
+DECLARE_CSR(mcause, CSR_MCAUSE)
+DECLARE_CSR(mbadaddr, CSR_MBADADDR)
+DECLARE_CSR(mip, CSR_MIP)
+DECLARE_CSR(mtime, CSR_MTIME)
+DECLARE_CSR(mcpuid, CSR_MCPUID)
+DECLARE_CSR(mimpid, CSR_MIMPID)
+DECLARE_CSR(mhartid, CSR_MHARTID)
+DECLARE_CSR(mtohost, CSR_MTOHOST)
+DECLARE_CSR(mfromhost, CSR_MFROMHOST)
+DECLARE_CSR(mreset, CSR_MRESET)
+DECLARE_CSR(send_ipi, CSR_SEND_IPI)
+DECLARE_CSR(cycleh, CSR_CYCLEH)
+DECLARE_CSR(timeh, CSR_TIMEH)
+DECLARE_CSR(instreth, CSR_INSTRETH)
+DECLARE_CSR(cyclehw, CSR_CYCLEHW)
+DECLARE_CSR(timehw, CSR_TIMEHW)
+DECLARE_CSR(instrethw, CSR_INSTRETHW)
+DECLARE_CSR(stimeh, CSR_STIMEH)
+DECLARE_CSR(stimehw, CSR_STIMEHW)
+DECLARE_CSR(mtimecmph, CSR_MTIMECMPH)
+DECLARE_CSR(mtimeh, CSR_MTIMEH)
+#endif
+#ifdef DECLARE_CAUSE
+DECLARE_CAUSE("fflags", CAUSE_FFLAGS)
+DECLARE_CAUSE("frm", CAUSE_FRM)
+DECLARE_CAUSE("fcsr", CAUSE_FCSR)
+DECLARE_CAUSE("cycle", CAUSE_CYCLE)
+DECLARE_CAUSE("time", CAUSE_TIME)
+DECLARE_CAUSE("instret", CAUSE_INSTRET)
+DECLARE_CAUSE("stats", CAUSE_STATS)
+DECLARE_CAUSE("uarch0", CAUSE_UARCH0)
+DECLARE_CAUSE("uarch1", CAUSE_UARCH1)
+DECLARE_CAUSE("uarch2", CAUSE_UARCH2)
+DECLARE_CAUSE("uarch3", CAUSE_UARCH3)
+DECLARE_CAUSE("uarch4", CAUSE_UARCH4)
+DECLARE_CAUSE("uarch5", CAUSE_UARCH5)
+DECLARE_CAUSE("uarch6", CAUSE_UARCH6)
+DECLARE_CAUSE("uarch7", CAUSE_UARCH7)
+DECLARE_CAUSE("uarch8", CAUSE_UARCH8)
+DECLARE_CAUSE("uarch9", CAUSE_UARCH9)
+DECLARE_CAUSE("uarch10", CAUSE_UARCH10)
+DECLARE_CAUSE("uarch11", CAUSE_UARCH11)
+DECLARE_CAUSE("uarch12", CAUSE_UARCH12)
+DECLARE_CAUSE("uarch13", CAUSE_UARCH13)
+DECLARE_CAUSE("uarch14", CAUSE_UARCH14)
+DECLARE_CAUSE("uarch15", CAUSE_UARCH15)
+DECLARE_CAUSE("sstatus", CAUSE_SSTATUS)
+DECLARE_CAUSE("stvec", CAUSE_STVEC)
+DECLARE_CAUSE("sie", CAUSE_SIE)
+DECLARE_CAUSE("sscratch", CAUSE_SSCRATCH)
+DECLARE_CAUSE("sepc", CAUSE_SEPC)
+DECLARE_CAUSE("sip", CAUSE_SIP)
+DECLARE_CAUSE("sptbr", CAUSE_SPTBR)
+DECLARE_CAUSE("sasid", CAUSE_SASID)
+DECLARE_CAUSE("cyclew", CAUSE_CYCLEW)
+DECLARE_CAUSE("timew", CAUSE_TIMEW)
+DECLARE_CAUSE("instretw", CAUSE_INSTRETW)
+DECLARE_CAUSE("stime", CAUSE_STIME)
+DECLARE_CAUSE("scause", CAUSE_SCAUSE)
+DECLARE_CAUSE("sbadaddr", CAUSE_SBADADDR)
+DECLARE_CAUSE("stimew", CAUSE_STIMEW)
+DECLARE_CAUSE("mstatus", CAUSE_MSTATUS)
+DECLARE_CAUSE("mtvec", CAUSE_MTVEC)
+DECLARE_CAUSE("mtdeleg", CAUSE_MTDELEG)
+DECLARE_CAUSE("mie", CAUSE_MIE)
+DECLARE_CAUSE("mtimecmp", CAUSE_MTIMECMP)
+DECLARE_CAUSE("mscratch", CAUSE_MSCRATCH)
+DECLARE_CAUSE("mepc", CAUSE_MEPC)
+DECLARE_CAUSE("mcause", CAUSE_MCAUSE)
+DECLARE_CAUSE("mbadaddr", CAUSE_MBADADDR)
+DECLARE_CAUSE("mip", CAUSE_MIP)
+DECLARE_CAUSE("mtime", CAUSE_MTIME)
+DECLARE_CAUSE("mcpuid", CAUSE_MCPUID)
+DECLARE_CAUSE("mimpid", CAUSE_MIMPID)
+DECLARE_CAUSE("mhartid", CAUSE_MHARTID)
+DECLARE_CAUSE("mtohost", CAUSE_MTOHOST)
+DECLARE_CAUSE("mfromhost", CAUSE_MFROMHOST)
+DECLARE_CAUSE("mreset", CAUSE_MRESET)
+DECLARE_CAUSE("send_ipi", CAUSE_SEND_IPI)
+DECLARE_CAUSE("cycleh", CAUSE_CYCLEH)
+DECLARE_CAUSE("timeh", CAUSE_TIMEH)
+DECLARE_CAUSE("instreth", CAUSE_INSTRETH)
+DECLARE_CAUSE("cyclehw", CAUSE_CYCLEHW)
+DECLARE_CAUSE("timehw", CAUSE_TIMEHW)
+DECLARE_CAUSE("instrethw", CAUSE_INSTRETHW)
+DECLARE_CAUSE("stimeh", CAUSE_STIMEH)
+DECLARE_CAUSE("stimehw", CAUSE_STIMEHW)
+DECLARE_CAUSE("mtimecmph", CAUSE_MTIMECMPH)
+DECLARE_CAUSE("mtimeh", CAUSE_MTIMEH)
+#endif
diff -urN empty/gcc/config/riscv/riscv-protos.h gcc-5.2.0/gcc/config/riscv/riscv-protos.h
--- gcc-5.2.0/gcc/config/riscv/riscv-protos.h 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/gcc/config/riscv/riscv-protos.h 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1,96 @@
+/* Definition of RISC-V target for GNU compiler.
+ Copyright (C) 2011-2014 Free Software Foundation, Inc.
+ Contributed by Andrew Waterman (waterman@cs.berkeley.edu) at UC Berkeley.
+ Based on MIPS target for GNU compiler.
+
+This file is part of GCC.
+
+GCC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 3, or (at your option)
+any later version.
+
+GCC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GCC; see the file COPYING3. If not see
+<http://www.gnu.org/licenses/>. */
+
+#ifndef GCC_RISCV_PROTOS_H
+#define GCC_RISCV_PROTOS_H
+
+enum riscv_symbol_type {
+ SYMBOL_ABSOLUTE,
+ SYMBOL_GOT_DISP,
+ SYMBOL_TLS,
+ SYMBOL_TLS_LE,
+ SYMBOL_TLS_IE,
+ SYMBOL_TLS_GD
+};
+#define NUM_SYMBOL_TYPES (SYMBOL_TLS_GD + 1)
+
+enum riscv_code_model {
+ CM_MEDLOW,
+ CM_MEDANY,
+ CM_PIC
+};
+extern enum riscv_code_model riscv_cmodel;
+
+extern bool riscv_symbolic_constant_p (rtx, enum riscv_symbol_type *);
+extern int riscv_regno_mode_ok_for_base_p (int, enum machine_mode, bool);
+extern int riscv_address_insns (rtx, enum machine_mode, bool);
+extern int riscv_const_insns (rtx);
+extern int riscv_split_const_insns (rtx);
+extern int riscv_load_store_insns (rtx, rtx_insn *);
+extern rtx riscv_emit_move (rtx, rtx);
+extern bool riscv_split_symbol (rtx, rtx, enum machine_mode, rtx *);
+extern rtx riscv_unspec_address (rtx, enum riscv_symbol_type);
+extern void riscv_move_integer (rtx, rtx, HOST_WIDE_INT);
+extern bool riscv_legitimize_move (enum machine_mode, rtx, rtx);
+extern bool riscv_legitimize_vector_move (enum machine_mode, rtx, rtx);
+
+extern rtx riscv_subword (rtx, bool);
+extern bool riscv_split_64bit_move_p (rtx, rtx);
+extern void riscv_split_doubleword_move (rtx, rtx);
+extern const char *riscv_output_move (rtx, rtx);
+extern const char *riscv_output_gpr_save (unsigned);
+#ifdef RTX_CODE
+extern void riscv_expand_scc (rtx *);
+extern void riscv_expand_conditional_branch (rtx *);
+#endif
+extern rtx riscv_expand_call (bool, rtx, rtx, rtx);
+extern void riscv_expand_fcc_reload (rtx, rtx, rtx);
+extern void riscv_set_return_address (rtx, rtx);
+extern bool riscv_expand_block_move (rtx, rtx, rtx);
+extern void riscv_expand_synci_loop (rtx, rtx);
+
+extern bool riscv_expand_ext_as_unaligned_load (rtx, rtx, HOST_WIDE_INT,
+ HOST_WIDE_INT);
+extern bool riscv_expand_ins_as_unaligned_store (rtx, rtx, HOST_WIDE_INT,
+ HOST_WIDE_INT);
+extern void riscv_order_regs_for_local_alloc (void);
+
+extern rtx riscv_return_addr (int, rtx);
+extern HOST_WIDE_INT riscv_initial_elimination_offset (int, int);
+extern void riscv_expand_prologue (void);
+extern void riscv_expand_epilogue (bool);
+extern bool riscv_can_use_return_insn (void);
+extern rtx riscv_function_value (const_tree, const_tree, enum machine_mode);
+
+extern enum reg_class riscv_secondary_reload_class (enum reg_class,
+ enum machine_mode,
+ rtx, bool);
+extern int riscv_class_max_nregs (enum reg_class, enum machine_mode);
+
+extern unsigned int riscv_hard_regno_nregs (int, enum machine_mode);
+
+extern void irix_asm_output_align (FILE *, unsigned);
+extern const char *current_section_name (void);
+extern unsigned int current_section_flags (void);
+
+extern void riscv_expand_vector_init (rtx, rtx);
+
+#endif /* ! GCC_RISCV_PROTOS_H */
diff -urN empty/gcc/config/riscv/riscv.c gcc-5.2.0/gcc/config/riscv/riscv.c
--- gcc-5.2.0/gcc/config/riscv/riscv.c 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/gcc/config/riscv/riscv.c 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1,4439 @@
+/* Subroutines used for code generation for RISC-V.
+ Copyright (C) 2011-2014 Free Software Foundation, Inc.
+ Contributed by Andrew Waterman (waterman@cs.berkeley.edu) at UC Berkeley.
+ Based on MIPS target for GNU compiler.
+
+This file is part of GCC.
+
+GCC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 3, or (at your option)
+any later version.
+
+GCC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GCC; see the file COPYING3. If not see
+<http://www.gnu.org/licenses/>. */
+
+#include "config.h"
+#include "system.h"
+#include "coretypes.h"
+#include "tm.h"
+#include "rtl.h"
+#include "regs.h"
+#include "hard-reg-set.h"
+#include "insn-config.h"
+#include "conditions.h"
+#include "insn-attr.h"
+#include "recog.h"
+#include "output.h"
+#include "hash-set.h"
+#include "machmode.h"
+#include "vec.h"
+#include "double-int.h"
+#include "input.h"
+#include "alias.h"
+#include "symtab.h"
+#include "wide-int.h"
+#include "inchash.h"
+#include "tree.h"
+#include "fold-const.h"
+#include "varasm.h"
+#include "stringpool.h"
+#include "stor-layout.h"
+#include "calls.h"
+#include "function.h"
+#include "hashtab.h"
+#include "flags.h"
+#include "statistics.h"
+#include "real.h"
+#include "fixed-value.h"
+#include "expmed.h"
+#include "dojump.h"
+#include "explow.h"
+#include "emit-rtl.h"
+#include "stmt.h"
+#include "expr.h"
+#include "insn-codes.h"
+#include "optabs.h"
+#include "libfuncs.h"
+#include "reload.h"
+#include "tm_p.h"
+#include "ggc.h"
+#include "gstab.h"
+#include "hash-table.h"
+#include "debug.h"
+#include "target.h"
+#include "target-def.h"
+#include "common/common-target.h"
+#include "langhooks.h"
+#include "dominance.h"
+#include "cfg.h"
+#include "cfgrtl.h"
+#include "cfganal.h"
+#include "lcm.h"
+#include "cfgbuild.h"
+#include "cfgcleanup.h"
+#include "predict.h"
+#include "basic-block.h"
+#include "sched-int.h"
+#include "tree-ssa-alias.h"
+#include "internal-fn.h"
+#include "gimple-fold.h"
+#include "tree-eh.h"
+#include "gimple-expr.h"
+#include "is-a.h"
+#include "gimple.h"
+#include "gimplify.h"
+#include "bitmap.h"
+#include "diagnostic.h"
+#include "target-globals.h"
+#include "opts.h"
+#include "tree-pass.h"
+#include "context.h"
+#include "hash-map.h"
+#include "plugin-api.h"
+#include "ipa-ref.h"
+#include "cgraph.h"
+#include "builtins.h"
+#include "rtl-iter.h"
+#include <stdint.h>
+
+/* True if X is an UNSPEC wrapper around a SYMBOL_REF or LABEL_REF. */
+#define UNSPEC_ADDRESS_P(X) \
+ (GET_CODE (X) == UNSPEC \
+ && XINT (X, 1) >= UNSPEC_ADDRESS_FIRST \
+ && XINT (X, 1) < UNSPEC_ADDRESS_FIRST + NUM_SYMBOL_TYPES)
+
+/* Extract the symbol or label from UNSPEC wrapper X. */
+#define UNSPEC_ADDRESS(X) \
+ XVECEXP (X, 0, 0)
+
+/* Extract the symbol type from UNSPEC wrapper X. */
+#define UNSPEC_ADDRESS_TYPE(X) \
+ ((enum riscv_symbol_type) (XINT (X, 1) - UNSPEC_ADDRESS_FIRST))
+
+/* The maximum distance between the top of the stack frame and the
+ value sp has when we save and restore registers. This is set by the
+ range of load/store offsets and must also preserve stack alignment. */
+#define RISCV_MAX_FIRST_STACK_STEP (RISCV_IMM_REACH/2 - 16)
+
+/* True if INSN is a riscv.md pattern or asm statement. */
+#define USEFUL_INSN_P(INSN) \
+ (NONDEBUG_INSN_P (INSN) \
+ && GET_CODE (PATTERN (INSN)) != USE \
+ && GET_CODE (PATTERN (INSN)) != CLOBBER \
+ && GET_CODE (PATTERN (INSN)) != ADDR_VEC \
+ && GET_CODE (PATTERN (INSN)) != ADDR_DIFF_VEC)
+
+/* True if bit BIT is set in VALUE. */
+#define BITSET_P(VALUE, BIT) (((VALUE) & (1 << (BIT))) != 0)
+
+/* Classifies an address.
+
+ ADDRESS_REG
+ A natural register + offset address. The register satisfies
+ riscv_valid_base_register_p and the offset is a const_arith_operand.
+
+ ADDRESS_LO_SUM
+ A LO_SUM rtx. The first operand is a valid base register and
+ the second operand is a symbolic address.
+
+ ADDRESS_CONST_INT
+ A signed 16-bit constant address.
+
+ ADDRESS_SYMBOLIC:
+ A constant symbolic address. */
+enum riscv_address_type {
+ ADDRESS_REG,
+ ADDRESS_LO_SUM,
+ ADDRESS_CONST_INT,
+ ADDRESS_SYMBOLIC
+};
+
+enum riscv_code_model riscv_cmodel = TARGET_DEFAULT_CMODEL;
+
+/* Macros to create an enumeration identifier for a function prototype. */
+#define RISCV_FTYPE_NAME1(A, B) RISCV_##A##_FTYPE_##B
+#define RISCV_FTYPE_NAME2(A, B, C) RISCV_##A##_FTYPE_##B##_##C
+#define RISCV_FTYPE_NAME3(A, B, C, D) RISCV_##A##_FTYPE_##B##_##C##_##D
+#define RISCV_FTYPE_NAME4(A, B, C, D, E) RISCV_##A##_FTYPE_##B##_##C##_##D##_##E
+
+/* Classifies the prototype of a built-in function. */
+enum riscv_function_type {
+#define DEF_RISCV_FTYPE(NARGS, LIST) RISCV_FTYPE_NAME##NARGS LIST,
+#include "config/riscv/riscv-ftypes.def"
+#undef DEF_RISCV_FTYPE
+ RISCV_MAX_FTYPE_MAX
+};
+
+/* Specifies how a built-in function should be converted into rtl. */
+enum riscv_builtin_type {
+ /* The function corresponds directly to an .md pattern. The return
+ value is mapped to operand 0 and the arguments are mapped to
+ operands 1 and above. */
+ RISCV_BUILTIN_DIRECT,
+
+ /* The function corresponds directly to an .md pattern. There is no return
+ value and the arguments are mapped to operands 0 and above. */
+ RISCV_BUILTIN_DIRECT_NO_TARGET
+};
+
+/* Information about a function's frame layout. */
+struct GTY(()) riscv_frame_info {
+ /* The size of the frame in bytes. */
+ HOST_WIDE_INT total_size;
+
+ /* Bit X is set if the function saves or restores GPR X. */
+ unsigned int mask;
+
+ /* Likewise FPR X. */
+ unsigned int fmask;
+
+ /* How much the GPR save/restore routines adjust sp (or 0 if unused). */
+ unsigned save_libcall_adjustment;
+
+ /* Offsets of fixed-point and floating-point save areas from frame bottom */
+ HOST_WIDE_INT gp_sp_offset;
+ HOST_WIDE_INT fp_sp_offset;
+
+ /* Offset of virtual frame pointer from stack pointer/frame bottom */
+ HOST_WIDE_INT frame_pointer_offset;
+
+ /* Offset of hard frame pointer from stack pointer/frame bottom */
+ HOST_WIDE_INT hard_frame_pointer_offset;
+
+ /* The offset of arg_pointer_rtx from the bottom of the frame. */
+ HOST_WIDE_INT arg_pointer_offset;
+};
+
+struct GTY(()) machine_function {
+ /* The number of extra stack bytes taken up by register varargs.
+ This area is allocated by the callee at the very top of the frame. */
+ int varargs_size;
+
+ /* Cached return value of leaf_function_p. <0 if false, >0 if true. */
+ int is_leaf;
+
+ /* The current frame information, calculated by riscv_compute_frame_info. */
+ struct riscv_frame_info frame;
+};
+
+/* Information about a single argument. */
+struct riscv_arg_info {
+ /* True if the argument is passed in a floating-point register, or
+ would have been if we hadn't run out of registers. */
+ bool fpr_p;
+
+ /* The number of words passed in registers, rounded up. */
+ unsigned int reg_words;
+
+ /* For EABI, the offset of the first register from GP_ARG_FIRST or
+ FP_ARG_FIRST. For other ABIs, the offset of the first register from
+ the start of the ABI's argument structure (see the CUMULATIVE_ARGS
+ comment for details).
+
+ The value is MAX_ARGS_IN_REGISTERS if the argument is passed entirely
+ on the stack. */
+ unsigned int reg_offset;
+
+ /* The number of words that must be passed on the stack, rounded up. */
+ unsigned int stack_words;
+
+ /* The offset from the start of the stack overflow area of the argument's
+ first stack word. Only meaningful when STACK_WORDS is nonzero. */
+ unsigned int stack_offset;
+};
+
+/* Information about an address described by riscv_address_type.
+
+ ADDRESS_CONST_INT
+ No fields are used.
+
+ ADDRESS_REG
+ REG is the base register and OFFSET is the constant offset.
+
+ ADDRESS_LO_SUM
+ REG and OFFSET are the operands to the LO_SUM and SYMBOL_TYPE
+ is the type of symbol it references.
+
+ ADDRESS_SYMBOLIC
+ SYMBOL_TYPE is the type of symbol that the address references. */
+struct riscv_address_info {
+ enum riscv_address_type type;
+ rtx reg;
+ rtx offset;
+ enum riscv_symbol_type symbol_type;
+};
+
+/* One stage in a constant building sequence. These sequences have
+ the form:
+
+ A = VALUE[0]
+ A = A CODE[1] VALUE[1]
+ A = A CODE[2] VALUE[2]
+ ...
+
+ where A is an accumulator, each CODE[i] is a binary rtl operation
+ and each VALUE[i] is a constant integer. CODE[0] is undefined. */
+struct riscv_integer_op {
+ enum rtx_code code;
+ unsigned HOST_WIDE_INT value;
+};
+
+/* The largest number of operations needed to load an integer constant.
+ The worst case is LUI, ADDI, SLLI, ADDI, SLLI, ADDI, SLLI, ADDI,
+ but we may attempt and reject even worse sequences. */
+#define RISCV_MAX_INTEGER_OPS 32
+
+/* Costs of various operations on the different architectures. */
+
+struct riscv_tune_info
+{
+ unsigned short fp_add[2];
+ unsigned short fp_mul[2];
+ unsigned short fp_div[2];
+ unsigned short int_mul[2];
+ unsigned short int_div[2];
+ unsigned short issue_rate;
+ unsigned short branch_cost;
+ unsigned short fp_to_int_cost;
+ unsigned short memory_cost;
+};
+
+/* Information about one CPU we know about. */
+struct riscv_cpu_info {
+ /* This CPU's canonical name. */
+ const char *name;
+
+ /* The RISC-V ISA and extensions supported by this CPU. */
+ const char *isa;
+
+ /* Tuning parameters for this CPU. */
+ const struct riscv_tune_info *tune_info;
+};
+
+/* Global variables for machine-dependent things. */
+
+/* Which tuning parameters to use. */
+static const struct riscv_tune_info *tune_info;
+
+/* Index [M][R] is true if register R is allowed to hold a value of mode M. */
+bool riscv_hard_regno_mode_ok[(int) MAX_MACHINE_MODE][FIRST_PSEUDO_REGISTER];
+
+/* riscv_lo_relocs[X] is the relocation to use when a symbol of type X
+ appears in a LO_SUM. It can be null if such LO_SUMs aren't valid or
+ if they are matched by a special .md file pattern. */
+const char *riscv_lo_relocs[NUM_SYMBOL_TYPES];
+
+/* Likewise for HIGHs. */
+const char *riscv_hi_relocs[NUM_SYMBOL_TYPES];
+
+/* Index R is the smallest register class that contains register R. */
+const enum reg_class riscv_regno_to_class[FIRST_PSEUDO_REGISTER] = {
+ GR_REGS, GR_REGS, GR_REGS, GR_REGS,
+ GR_REGS, T_REGS, T_REGS, T_REGS,
+ GR_REGS, GR_REGS, GR_REGS, GR_REGS,
+ GR_REGS, GR_REGS, GR_REGS, GR_REGS,
+ GR_REGS, GR_REGS, GR_REGS, GR_REGS,
+ GR_REGS, GR_REGS, GR_REGS, GR_REGS,
+ GR_REGS, GR_REGS, GR_REGS, GR_REGS,
+ T_REGS, T_REGS, T_REGS, T_REGS,
+ FP_REGS, FP_REGS, FP_REGS, FP_REGS,
+ FP_REGS, FP_REGS, FP_REGS, FP_REGS,
+ FP_REGS, FP_REGS, FP_REGS, FP_REGS,
+ FP_REGS, FP_REGS, FP_REGS, FP_REGS,
+ FP_REGS, FP_REGS, FP_REGS, FP_REGS,
+ FP_REGS, FP_REGS, FP_REGS, FP_REGS,
+ FP_REGS, FP_REGS, FP_REGS, FP_REGS,
+ FP_REGS, FP_REGS, FP_REGS, FP_REGS,
+ FRAME_REGS, FRAME_REGS,
+};
+
+/* Costs to use when optimizing for size. */
+static const struct riscv_tune_info rocket_tune_info = {
+ {COSTS_N_INSNS (4), COSTS_N_INSNS (5)}, /* fp_add */
+ {COSTS_N_INSNS (4), COSTS_N_INSNS (5)}, /* fp_mul */
+ {COSTS_N_INSNS (20), COSTS_N_INSNS (20)}, /* fp_div */
+ {COSTS_N_INSNS (4), COSTS_N_INSNS (4)}, /* int_mul */
+ {COSTS_N_INSNS (6), COSTS_N_INSNS (6)}, /* int_div */
+ 1, /* issue_rate */
+ 3, /* branch_cost */
+ COSTS_N_INSNS (2), /* fp_to_int_cost */
+ 5 /* memory_cost */
+};
+
+/* Costs to use when optimizing for size. */
+static const struct riscv_tune_info optimize_size_tune_info = {
+ {COSTS_N_INSNS (1), COSTS_N_INSNS (1)}, /* fp_add */
+ {COSTS_N_INSNS (1), COSTS_N_INSNS (1)}, /* fp_mul */
+ {COSTS_N_INSNS (1), COSTS_N_INSNS (1)}, /* fp_div */
+ {COSTS_N_INSNS (1), COSTS_N_INSNS (1)}, /* int_mul */
+ {COSTS_N_INSNS (1), COSTS_N_INSNS (1)}, /* int_div */
+ 1, /* issue_rate */
+ 1, /* branch_cost */
+ COSTS_N_INSNS (1), /* fp_to_int_cost */
+ 1 /* memory_cost */
+};
+
+/* A table describing all the processors GCC knows about. */
+static const struct riscv_cpu_info riscv_cpu_info_table[] = {
+ /* Entries for generic ISAs. */
+ { "rocket", "IMAFD", &rocket_tune_info },
+};
+
+/* Return the riscv_cpu_info entry for the given name string. */
+
+static const struct riscv_cpu_info *
+riscv_parse_cpu (const char *cpu_string)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE (riscv_cpu_info_table); i++)
+ if (strcmp (riscv_cpu_info_table[i].name, cpu_string) == 0)
+ return riscv_cpu_info_table + i;
+
+ error ("unknown cpu `%s'", cpu_string);
+ return riscv_cpu_info_table;
+}
+
+/* Fill CODES with a sequence of rtl operations to load VALUE.
+ Return the number of operations needed. */
+
+static int
+riscv_build_integer_1 (struct riscv_integer_op *codes, HOST_WIDE_INT value,
+ enum machine_mode mode)
+{
+ HOST_WIDE_INT low_part = RISCV_CONST_LOW_PART (value);
+ int cost = INT_MAX, alt_cost;
+ struct riscv_integer_op alt_codes[RISCV_MAX_INTEGER_OPS];
+
+ if (SMALL_OPERAND (value) || LUI_OPERAND (value))
+ {
+ /* Simply ADDI or LUI */
+ codes[0].code = UNKNOWN;
+ codes[0].value = value;
+ return 1;
+ }
+
+ /* End with ADDI */
+ if (low_part != 0
+ && !(mode == HImode && (int16_t)(value - low_part) != (value - low_part)))
+ {
+ cost = 1 + riscv_build_integer_1 (codes, value - low_part, mode);
+ codes[cost-1].code = PLUS;
+ codes[cost-1].value = low_part;
+ }
+
+ /* End with XORI */
+ if (cost > 2 && (low_part < 0 || mode == HImode))
+ {
+ alt_cost = 1 + riscv_build_integer_1 (alt_codes, value ^ low_part, mode);
+ alt_codes[alt_cost-1].code = XOR;
+ alt_codes[alt_cost-1].value = low_part;
+ if (alt_cost < cost)
+ cost = alt_cost, memcpy (codes, alt_codes, sizeof(alt_codes));
+ }
+
+ /* Eliminate trailing zeros and end with SLLI */
+ if (cost > 2 && (value & 1) == 0)
+ {
+ int shift = 0;
+ while ((value & 1) == 0)
+ shift++, value >>= 1;
+ alt_cost = 1 + riscv_build_integer_1 (alt_codes, value, mode);
+ alt_codes[alt_cost-1].code = ASHIFT;
+ alt_codes[alt_cost-1].value = shift;
+ if (alt_cost < cost)
+ cost = alt_cost, memcpy (codes, alt_codes, sizeof(alt_codes));
+ }
+
+ gcc_assert (cost <= RISCV_MAX_INTEGER_OPS);
+ return cost;
+}
+
+static int
+riscv_build_integer (struct riscv_integer_op *codes, HOST_WIDE_INT value,
+ enum machine_mode mode)
+{
+ int cost = riscv_build_integer_1 (codes, value, mode);
+
+ /* Eliminate leading zeros and end with SRLI */
+ if (value > 0 && cost > 2)
+ {
+ struct riscv_integer_op alt_codes[RISCV_MAX_INTEGER_OPS];
+ int alt_cost, shift = 0;
+ HOST_WIDE_INT shifted_val;
+
+ /* Try filling trailing bits with 1s */
+ while ((value << shift) >= 0)
+ shift++;
+ shifted_val = (value << shift) | ((((HOST_WIDE_INT) 1) << shift) - 1);
+ alt_cost = 1 + riscv_build_integer_1 (alt_codes, shifted_val, mode);
+ alt_codes[alt_cost-1].code = LSHIFTRT;
+ alt_codes[alt_cost-1].value = shift;
+ if (alt_cost < cost)
+ cost = alt_cost, memcpy (codes, alt_codes, sizeof (alt_codes));
+
+ /* Try filling trailing bits with 0s */
+ shifted_val = value << shift;
+ alt_cost = 1 + riscv_build_integer_1 (alt_codes, shifted_val, mode);
+ alt_codes[alt_cost-1].code = LSHIFTRT;
+ alt_codes[alt_cost-1].value = shift;
+ if (alt_cost < cost)
+ cost = alt_cost, memcpy (codes, alt_codes, sizeof (alt_codes));
+ }
+
+ return cost;
+}
+
+static int
+riscv_split_integer_cost (HOST_WIDE_INT val)
+{
+ int cost;
+ int32_t loval = val, hival = (val - (int32_t)val) >> 32;
+ struct riscv_integer_op codes[RISCV_MAX_INTEGER_OPS];
+
+ cost = 2 + riscv_build_integer (codes, loval, VOIDmode);
+ if (loval != hival)
+ cost += riscv_build_integer (codes, hival, VOIDmode);
+
+ return cost;
+}
+
+static int
+riscv_integer_cost (HOST_WIDE_INT val)
+{
+ struct riscv_integer_op codes[RISCV_MAX_INTEGER_OPS];
+ return MIN (riscv_build_integer (codes, val, VOIDmode),
+ riscv_split_integer_cost (val));
+}
+
+/* Try to split a 64b integer into 32b parts, then reassemble. */
+
+static rtx
+riscv_split_integer (HOST_WIDE_INT val, enum machine_mode mode)
+{
+ int32_t loval = val, hival = (val - (int32_t)val) >> 32;
+ rtx hi = gen_reg_rtx (mode), lo = gen_reg_rtx (mode);
+
+ riscv_move_integer (hi, hi, hival);
+ riscv_move_integer (lo, lo, loval);
+
+ hi = gen_rtx_fmt_ee (ASHIFT, mode, hi, GEN_INT (32));
+ hi = force_reg (mode, hi);
+
+ return gen_rtx_fmt_ee (PLUS, mode, hi, lo);
+}
+
+/* Return true if X is a thread-local symbol. */
+
+static bool
+riscv_tls_symbol_p (const_rtx x)
+{
+ return GET_CODE (x) == SYMBOL_REF && SYMBOL_REF_TLS_MODEL (x) != 0;
+}
+
+static bool
+riscv_symbol_binds_local_p (const_rtx x)
+{
+ return (SYMBOL_REF_DECL (x)
+ ? targetm.binds_local_p (SYMBOL_REF_DECL (x))
+ : SYMBOL_REF_LOCAL_P (x));
+}
+
+/* Return the method that should be used to access SYMBOL_REF or
+ LABEL_REF X in context CONTEXT. */
+
+static enum riscv_symbol_type
+riscv_classify_symbol (const_rtx x)
+{
+ if (riscv_tls_symbol_p (x))
+ return SYMBOL_TLS;
+
+ if (GET_CODE (x) == LABEL_REF)
+ {
+ if (LABEL_REF_NONLOCAL_P (x))
+ return SYMBOL_GOT_DISP;
+ return SYMBOL_ABSOLUTE;
+ }
+
+ gcc_assert (GET_CODE (x) == SYMBOL_REF);
+
+ if (flag_pic && !riscv_symbol_binds_local_p (x))
+ return SYMBOL_GOT_DISP;
+
+ return SYMBOL_ABSOLUTE;
+}
+
+/* Classify the base of symbolic expression X, given that X appears in
+ context CONTEXT. */
+
+static enum riscv_symbol_type
+riscv_classify_symbolic_expression (rtx x)
+{
+ rtx offset;
+
+ split_const (x, &x, &offset);
+ if (UNSPEC_ADDRESS_P (x))
+ return UNSPEC_ADDRESS_TYPE (x);
+
+ return riscv_classify_symbol (x);
+}
+
+/* Return true if X is a symbolic constant that can be used in context
+ CONTEXT. If it is, store the type of the symbol in *SYMBOL_TYPE. */
+
+bool
+riscv_symbolic_constant_p (rtx x, enum riscv_symbol_type *symbol_type)
+{
+ rtx offset;
+
+ split_const (x, &x, &offset);
+ if (UNSPEC_ADDRESS_P (x))
+ {
+ *symbol_type = UNSPEC_ADDRESS_TYPE (x);
+ x = UNSPEC_ADDRESS (x);
+ }
+ else if (GET_CODE (x) == SYMBOL_REF || GET_CODE (x) == LABEL_REF)
+ *symbol_type = riscv_classify_symbol (x);
+ else
+ return false;
+
+ if (offset == const0_rtx)
+ return true;
+
+ /* Check whether a nonzero offset is valid for the underlying
+ relocations. */
+ switch (*symbol_type)
+ {
+ case SYMBOL_ABSOLUTE:
+ case SYMBOL_TLS_LE:
+ return (int32_t) INTVAL (offset) == INTVAL (offset);
+
+ default:
+ return false;
+ }
+ gcc_unreachable ();
+}
+
+/* Returns the number of instructions necessary to reference a symbol. */
+
+static int riscv_symbol_insns (enum riscv_symbol_type type)
+{
+ switch (type)
+ {
+ case SYMBOL_TLS: return 0; /* Depends on the TLS model. */
+ case SYMBOL_ABSOLUTE: return 2; /* LUI + the reference itself */
+ case SYMBOL_TLS_LE: return 3; /* LUI + ADD TP + the reference itself */
+ case SYMBOL_GOT_DISP: return 3; /* AUIPC + LD GOT + the reference itself */
+ default: gcc_unreachable();
+ }
+}
+
+/* Implement TARGET_LEGITIMATE_CONSTANT_P. */
+
+static bool
+riscv_legitimate_constant_p (enum machine_mode mode ATTRIBUTE_UNUSED, rtx x)
+{
+ return riscv_const_insns (x) > 0;
+}
+
+/* Implement TARGET_CANNOT_FORCE_CONST_MEM. */
+
+static bool
+riscv_cannot_force_const_mem (enum machine_mode mode ATTRIBUTE_UNUSED, rtx x)
+{
+ enum riscv_symbol_type type;
+ rtx base, offset;
+
+ /* There is no assembler syntax for expressing an address-sized
+ high part. */
+ if (GET_CODE (x) == HIGH)
+ return true;
+
+ split_const (x, &base, &offset);
+ if (riscv_symbolic_constant_p (base, &type))
+ {
+ /* As an optimization, don't spill symbolic constants that are as
+ cheap to rematerialize as to access in the constant pool. */
+ if (SMALL_INT (offset) && riscv_symbol_insns (type) > 0)
+ return true;
+
+ /* As an optimization, avoid needlessly generate dynamic relocations. */
+ if (flag_pic)
+ return true;
+ }
+
+ /* TLS symbols must be computed by riscv_legitimize_move. */
+ if (tls_referenced_p (x))
+ return true;
+
+ return false;
+}
+
+/* Return true if register REGNO is a valid base register for mode MODE.
+ STRICT_P is true if REG_OK_STRICT is in effect. */
+
+int
+riscv_regno_mode_ok_for_base_p (int regno, enum machine_mode mode ATTRIBUTE_UNUSED,
+ bool strict_p)
+{
+ if (!HARD_REGISTER_NUM_P (regno))
+ {
+ if (!strict_p)
+ return true;
+ regno = reg_renumber[regno];
+ }
+
+ /* These fake registers will be eliminated to either the stack or
+ hard frame pointer, both of which are usually valid base registers.
+ Reload deals with the cases where the eliminated form isn't valid. */
+ if (regno == ARG_POINTER_REGNUM || regno == FRAME_POINTER_REGNUM)
+ return true;
+
+ return GP_REG_P (regno);
+}
+
+/* Return true if X is a valid base register for mode MODE.
+ STRICT_P is true if REG_OK_STRICT is in effect. */
+
+static bool
+riscv_valid_base_register_p (rtx x, enum machine_mode mode, bool strict_p)
+{
+ if (!strict_p && GET_CODE (x) == SUBREG)
+ x = SUBREG_REG (x);
+
+ return (REG_P (x)
+ && riscv_regno_mode_ok_for_base_p (REGNO (x), mode, strict_p));
+}
+
+/* Return true if, for every base register BASE_REG, (plus BASE_REG X)
+ can address a value of mode MODE. */
+
+static bool
+riscv_valid_offset_p (rtx x, enum machine_mode mode)
+{
+ /* Check that X is a signed 12-bit number. */
+ if (!const_arith_operand (x, Pmode))
+ return false;
+
+ /* We may need to split multiword moves, so make sure that every word
+ is accessible. */
+ if (GET_MODE_SIZE (mode) > UNITS_PER_WORD
+ && !SMALL_OPERAND (INTVAL (x) + GET_MODE_SIZE (mode) - UNITS_PER_WORD))
+ return false;
+
+ return true;
+}
+
+/* Return true if a LO_SUM can address a value of mode MODE when the
+ LO_SUM symbol has type SYMBOL_TYPE. */
+
+static bool
+riscv_valid_lo_sum_p (enum riscv_symbol_type symbol_type, enum machine_mode mode)
+{
+ /* Check that symbols of type SYMBOL_TYPE can be used to access values
+ of mode MODE. */
+ if (riscv_symbol_insns (symbol_type) == 0)
+ return false;
+
+ /* Check that there is a known low-part relocation. */
+ if (riscv_lo_relocs[symbol_type] == NULL)
+ return false;
+
+ /* We may need to split multiword moves, so make sure that each word
+ can be accessed without inducing a carry. This is mainly needed
+ for o64, which has historically only guaranteed 64-bit alignment
+ for 128-bit types. */
+ if (GET_MODE_SIZE (mode) > UNITS_PER_WORD
+ && GET_MODE_BITSIZE (mode) > GET_MODE_ALIGNMENT (mode))
+ return false;
+
+ return true;
+}
+
+/* Return true if X is a valid address for machine mode MODE. If it is,
+ fill in INFO appropriately. STRICT_P is true if REG_OK_STRICT is in
+ effect. */
+
+static bool
+riscv_classify_address (struct riscv_address_info *info, rtx x,
+ enum machine_mode mode, bool strict_p)
+{
+ switch (GET_CODE (x))
+ {
+ case REG:
+ case SUBREG:
+ info->type = ADDRESS_REG;
+ info->reg = x;
+ info->offset = const0_rtx;
+ return riscv_valid_base_register_p (info->reg, mode, strict_p);
+
+ case PLUS:
+ info->type = ADDRESS_REG;
+ info->reg = XEXP (x, 0);
+ info->offset = XEXP (x, 1);
+ return (riscv_valid_base_register_p (info->reg, mode, strict_p)
+ && riscv_valid_offset_p (info->offset, mode));
+
+ case LO_SUM:
+ info->type = ADDRESS_LO_SUM;
+ info->reg = XEXP (x, 0);
+ info->offset = XEXP (x, 1);
+ /* We have to trust the creator of the LO_SUM to do something vaguely
+ sane. Target-independent code that creates a LO_SUM should also
+ create and verify the matching HIGH. Target-independent code that
+ adds an offset to a LO_SUM must prove that the offset will not
+ induce a carry. Failure to do either of these things would be
+ a bug, and we are not required to check for it here. The RISCV
+ backend itself should only create LO_SUMs for valid symbolic
+ constants, with the high part being either a HIGH or a copy
+ of _gp. */
+ info->symbol_type
+ = riscv_classify_symbolic_expression (info->offset);
+ return (riscv_valid_base_register_p (info->reg, mode, strict_p)
+ && riscv_valid_lo_sum_p (info->symbol_type, mode));
+
+ case CONST_INT:
+ /* Small-integer addresses don't occur very often, but they
+ are legitimate if $0 is a valid base register. */
+ info->type = ADDRESS_CONST_INT;
+ return SMALL_INT (x);
+
+ default:
+ return false;
+ }
+}
+
+/* Implement TARGET_LEGITIMATE_ADDRESS_P. */
+
+static bool
+riscv_legitimate_address_p (enum machine_mode mode, rtx x, bool strict_p)
+{
+ struct riscv_address_info addr;
+
+ return riscv_classify_address (&addr, x, mode, strict_p);
+}
+
+/* Return the number of instructions needed to load or store a value
+ of mode MODE at address X. Return 0 if X isn't valid for MODE.
+ Assume that multiword moves may need to be split into word moves
+ if MIGHT_SPLIT_P, otherwise assume that a single load or store is
+ enough. */
+
+int
+riscv_address_insns (rtx x, enum machine_mode mode, bool might_split_p)
+{
+ struct riscv_address_info addr;
+ int n = 1;
+
+ if (!riscv_classify_address (&addr, x, mode, false))
+ return 0;
+
+ /* BLKmode is used for single unaligned loads and stores and should
+ not count as a multiword mode. */
+ if (mode != BLKmode && might_split_p)
+ n += (GET_MODE_SIZE (mode) + UNITS_PER_WORD - 1) / UNITS_PER_WORD;
+
+ if (addr.type == ADDRESS_LO_SUM)
+ n += riscv_symbol_insns (addr.symbol_type) - 1;
+
+ return n;
+}
+
+/* Return the number of instructions needed to load constant X.
+ Return 0 if X isn't a valid constant. */
+
+int
+riscv_const_insns (rtx x)
+{
+ enum riscv_symbol_type symbol_type;
+ rtx offset;
+
+ switch (GET_CODE (x))
+ {
+ case HIGH:
+ if (!riscv_symbolic_constant_p (XEXP (x, 0), &symbol_type)
+ || !riscv_hi_relocs[symbol_type])
+ return 0;
+
+ /* This is simply an LUI. */
+ return 1;
+
+ case CONST_INT:
+ {
+ int cost = riscv_integer_cost (INTVAL (x));
+ /* Force complicated constants to memory. */
+ return cost < 4 ? cost : 0;
+ }
+
+ case CONST_DOUBLE:
+ case CONST_VECTOR:
+ /* Allow zeros for normal mode, where we can use x0. */
+ return x == CONST0_RTX (GET_MODE (x)) ? 1 : 0;
+
+ case CONST:
+ /* See if we can refer to X directly. */
+ if (riscv_symbolic_constant_p (x, &symbol_type))
+ return riscv_symbol_insns (symbol_type);
+
+ /* Otherwise try splitting the constant into a base and offset.
+ If the offset is a 16-bit value, we can load the base address
+ into a register and then use (D)ADDIU to add in the offset.
+ If the offset is larger, we can load the base and offset
+ into separate registers and add them together with (D)ADDU.
+ However, the latter is only possible before reload; during
+ and after reload, we must have the option of forcing the
+ constant into the pool instead. */
+ split_const (x, &x, &offset);
+ if (offset != 0)
+ {
+ int n = riscv_const_insns (x);
+ if (n != 0)
+ {
+ if (SMALL_INT (offset))
+ return n + 1;
+ else if (!targetm.cannot_force_const_mem (GET_MODE (x), x))
+ return n + 1 + riscv_integer_cost (INTVAL (offset));
+ }
+ }
+ return 0;
+
+ case SYMBOL_REF:
+ case LABEL_REF:
+ return riscv_symbol_insns (riscv_classify_symbol (x));
+
+ default:
+ return 0;
+ }
+}
+
+/* X is a doubleword constant that can be handled by splitting it into
+ two words and loading each word separately. Return the number of
+ instructions required to do this. */
+
+int
+riscv_split_const_insns (rtx x)
+{
+ unsigned int low, high;
+
+ low = riscv_const_insns (riscv_subword (x, false));
+ high = riscv_const_insns (riscv_subword (x, true));
+ gcc_assert (low > 0 && high > 0);
+ return low + high;
+}
+
+/* Return the number of instructions needed to implement INSN,
+ given that it loads from or stores to MEM. */
+
+int
+riscv_load_store_insns (rtx mem, rtx_insn *insn)
+{
+ enum machine_mode mode;
+ bool might_split_p;
+ rtx set;
+
+ gcc_assert (MEM_P (mem));
+ mode = GET_MODE (mem);
+
+ /* Try to prove that INSN does not need to be split. */
+ might_split_p = true;
+ if (GET_MODE_BITSIZE (mode) == 64)
+ {
+ set = single_set (insn);
+ if (set && !riscv_split_64bit_move_p (SET_DEST (set), SET_SRC (set)))
+ might_split_p = false;
+ }
+
+ return riscv_address_insns (XEXP (mem, 0), mode, might_split_p);
+}
+
+/* Emit a move from SRC to DEST. Assume that the move expanders can
+ handle all moves if !can_create_pseudo_p (). The distinction is
+ important because, unlike emit_move_insn, the move expanders know
+ how to force Pmode objects into the constant pool even when the
+ constant pool address is not itself legitimate. */
+
+rtx
+riscv_emit_move (rtx dest, rtx src)
+{
+ return (can_create_pseudo_p ()
+ ? emit_move_insn (dest, src)
+ : emit_move_insn_1 (dest, src));
+}
+
+/* Emit an instruction of the form (set TARGET (CODE OP0 OP1)). */
+
+static void
+riscv_emit_binary (enum rtx_code code, rtx target, rtx op0, rtx op1)
+{
+ emit_insn (gen_rtx_SET (VOIDmode, target,
+ gen_rtx_fmt_ee (code, GET_MODE (target), op0, op1)));
+}
+
+/* Compute (CODE OP0 OP1) and store the result in a new register
+ of mode MODE. Return that new register. */
+
+static rtx
+riscv_force_binary (enum machine_mode mode, enum rtx_code code, rtx op0, rtx op1)
+{
+ rtx reg;
+
+ reg = gen_reg_rtx (mode);
+ riscv_emit_binary (code, reg, op0, op1);
+ return reg;
+}
+
+/* Copy VALUE to a register and return that register. If new pseudos
+ are allowed, copy it into a new register, otherwise use DEST. */
+
+static rtx
+riscv_force_temporary (rtx dest, rtx value)
+{
+ if (can_create_pseudo_p ())
+ return force_reg (Pmode, value);
+ else
+ {
+ riscv_emit_move (dest, value);
+ return dest;
+ }
+}
+
+/* Wrap symbol or label BASE in an UNSPEC address of type SYMBOL_TYPE,
+ then add CONST_INT OFFSET to the result. */
+
+static rtx
+riscv_unspec_address_offset (rtx base, rtx offset,
+ enum riscv_symbol_type symbol_type)
+{
+ base = gen_rtx_UNSPEC (Pmode, gen_rtvec (1, base),
+ UNSPEC_ADDRESS_FIRST + symbol_type);
+ if (offset != const0_rtx)
+ base = gen_rtx_PLUS (Pmode, base, offset);
+ return gen_rtx_CONST (Pmode, base);
+}
+
+/* Return an UNSPEC address with underlying address ADDRESS and symbol
+ type SYMBOL_TYPE. */
+
+rtx
+riscv_unspec_address (rtx address, enum riscv_symbol_type symbol_type)
+{
+ rtx base, offset;
+
+ split_const (address, &base, &offset);
+ return riscv_unspec_address_offset (base, offset, symbol_type);
+}
+
+/* If OP is an UNSPEC address, return the address to which it refers,
+ otherwise return OP itself. */
+
+static rtx
+riscv_strip_unspec_address (rtx op)
+{
+ rtx base, offset;
+
+ split_const (op, &base, &offset);
+ if (UNSPEC_ADDRESS_P (base))
+ op = plus_constant (Pmode, UNSPEC_ADDRESS (base), INTVAL (offset));
+ return op;
+}
+
+/* If riscv_unspec_address (ADDR, SYMBOL_TYPE) is a 32-bit value, add the
+ high part to BASE and return the result. Just return BASE otherwise.
+ TEMP is as for riscv_force_temporary.
+
+ The returned expression can be used as the first operand to a LO_SUM. */
+
+static rtx
+riscv_unspec_offset_high (rtx temp, rtx addr, enum riscv_symbol_type symbol_type)
+{
+ addr = gen_rtx_HIGH (Pmode, riscv_unspec_address (addr, symbol_type));
+ return riscv_force_temporary (temp, addr);
+}
+
+/* Load an entry from the GOT. */
+static rtx riscv_got_load_tls_gd(rtx dest, rtx sym)
+{
+ return (Pmode == DImode ? gen_got_load_tls_gddi(dest, sym) : gen_got_load_tls_gdsi(dest, sym));
+}
+
+static rtx riscv_got_load_tls_ie(rtx dest, rtx sym)
+{
+ return (Pmode == DImode ? gen_got_load_tls_iedi(dest, sym) : gen_got_load_tls_iesi(dest, sym));
+}
+
+static rtx riscv_tls_add_tp_le(rtx dest, rtx base, rtx sym)
+{
+ rtx tp = gen_rtx_REG (Pmode, THREAD_POINTER_REGNUM);
+ return (Pmode == DImode ? gen_tls_add_tp_ledi(dest, base, tp, sym) : gen_tls_add_tp_lesi(dest, base, tp, sym));
+}
+
+/* If MODE is MAX_MACHINE_MODE, ADDR appears as a move operand, otherwise
+ it appears in a MEM of that mode. Return true if ADDR is a legitimate
+ constant in that context and can be split into high and low parts.
+ If so, and if LOW_OUT is nonnull, emit the high part and store the
+ low part in *LOW_OUT. Leave *LOW_OUT unchanged otherwise.
+
+ TEMP is as for riscv_force_temporary and is used to load the high
+ part into a register.
+
+ When MODE is MAX_MACHINE_MODE, the low part is guaranteed to be
+ a legitimize SET_SRC for an .md pattern, otherwise the low part
+ is guaranteed to be a legitimate address for mode MODE. */
+
+bool
+riscv_split_symbol (rtx temp, rtx addr, enum machine_mode mode, rtx *low_out)
+{
+ enum riscv_symbol_type symbol_type;
+ rtx high;
+
+ if ((GET_CODE (addr) == HIGH && mode == MAX_MACHINE_MODE)
+ || !riscv_symbolic_constant_p (addr, &symbol_type)
+ || riscv_symbol_insns (symbol_type) == 0
+ || !riscv_hi_relocs[symbol_type])
+ return false;
+
+ if (low_out)
+ {
+ switch (symbol_type)
+ {
+ case SYMBOL_ABSOLUTE:
+ high = gen_rtx_HIGH (Pmode, copy_rtx (addr));
+ high = riscv_force_temporary (temp, high);
+ *low_out = gen_rtx_LO_SUM (Pmode, high, addr);
+ break;
+
+ default:
+ gcc_unreachable ();
+ }
+ }
+
+ return true;
+}
+
+/* Return a legitimate address for REG + OFFSET. TEMP is as for
+ riscv_force_temporary; it is only needed when OFFSET is not a
+ SMALL_OPERAND. */
+
+static rtx
+riscv_add_offset (rtx temp, rtx reg, HOST_WIDE_INT offset)
+{
+ if (!SMALL_OPERAND (offset))
+ {
+ rtx high;
+
+ /* Leave OFFSET as a 16-bit offset and put the excess in HIGH.
+ The addition inside the macro CONST_HIGH_PART may cause an
+ overflow, so we need to force a sign-extension check. */
+ high = gen_int_mode (RISCV_CONST_HIGH_PART (offset), Pmode);
+ offset = RISCV_CONST_LOW_PART (offset);
+ high = riscv_force_temporary (temp, high);
+ reg = riscv_force_temporary (temp, gen_rtx_PLUS (Pmode, high, reg));
+ }
+ return plus_constant (Pmode, reg, offset);
+}
+
+/* The __tls_get_attr symbol. */
+static GTY(()) rtx riscv_tls_symbol;
+
+/* Return an instruction sequence that calls __tls_get_addr. SYM is
+ the TLS symbol we are referencing and TYPE is the symbol type to use
+ (either global dynamic or local dynamic). RESULT is an RTX for the
+ return value location. */
+
+static rtx
+riscv_call_tls_get_addr (rtx sym, rtx result)
+{
+ rtx insn, a0 = gen_rtx_REG (Pmode, GP_ARG_FIRST);
+
+ if (!riscv_tls_symbol)
+ riscv_tls_symbol = init_one_libfunc ("__tls_get_addr");
+
+ start_sequence ();
+
+ emit_insn (riscv_got_load_tls_gd (a0, sym));
+ insn = riscv_expand_call (false, result, riscv_tls_symbol, const0_rtx);
+ RTL_CONST_CALL_P (insn) = 1;
+ use_reg (&CALL_INSN_FUNCTION_USAGE (insn), a0);
+ insn = get_insns ();
+
+ end_sequence ();
+
+ return insn;
+}
+
+/* Generate the code to access LOC, a thread-local SYMBOL_REF, and return
+ its address. The return value will be both a valid address and a valid
+ SET_SRC (either a REG or a LO_SUM). */
+
+static rtx
+riscv_legitimize_tls_address (rtx loc)
+{
+ rtx dest, insn, tp, tmp1;
+ enum tls_model model = SYMBOL_REF_TLS_MODEL (loc);
+
+ /* Since we support TLS copy relocs, non-PIC TLS accesses may all use LE. */
+ if (!flag_pic)
+ model = TLS_MODEL_LOCAL_EXEC;
+
+ switch (model)
+ {
+ case TLS_MODEL_LOCAL_DYNAMIC:
+ /* Rely on section anchors for the optimization that LDM TLS
+ provides. The anchor's address is loaded with GD TLS. */
+ case TLS_MODEL_GLOBAL_DYNAMIC:
+ tmp1 = gen_rtx_REG (Pmode, GP_RETURN);
+ insn = riscv_call_tls_get_addr (loc, tmp1);
+ dest = gen_reg_rtx (Pmode);
+ emit_libcall_block (insn, dest, tmp1, loc);
+ break;
+
+ case TLS_MODEL_INITIAL_EXEC:
+ /* la.tls.ie; tp-relative add */
+ tp = gen_rtx_REG (Pmode, THREAD_POINTER_REGNUM);
+ tmp1 = gen_reg_rtx (Pmode);
+ emit_insn (riscv_got_load_tls_ie (tmp1, loc));
+ dest = gen_reg_rtx (Pmode);
+ emit_insn (gen_add3_insn (dest, tmp1, tp));
+ break;
+
+ case TLS_MODEL_LOCAL_EXEC:
+ tmp1 = riscv_unspec_offset_high (NULL, loc, SYMBOL_TLS_LE);
+ dest = gen_reg_rtx (Pmode);
+ emit_insn (riscv_tls_add_tp_le (dest, tmp1, loc));
+ dest = gen_rtx_LO_SUM (Pmode, dest,
+ riscv_unspec_address (loc, SYMBOL_TLS_LE));
+ break;
+
+ default:
+ gcc_unreachable ();
+ }
+ return dest;
+}
+
+/* If X is not a valid address for mode MODE, force it into a register. */
+
+static rtx
+riscv_force_address (rtx x, enum machine_mode mode)
+{
+ if (!riscv_legitimate_address_p (mode, x, false))
+ x = force_reg (Pmode, x);
+ return x;
+}
+
+/* This function is used to implement LEGITIMIZE_ADDRESS. If X can
+ be legitimized in a way that the generic machinery might not expect,
+ return a new address, otherwise return NULL. MODE is the mode of
+ the memory being accessed. */
+
+static rtx
+riscv_legitimize_address (rtx x, rtx oldx ATTRIBUTE_UNUSED,
+ enum machine_mode mode)
+{
+ rtx addr;
+
+ if (riscv_tls_symbol_p (x))
+ return riscv_legitimize_tls_address (x);
+
+ /* See if the address can split into a high part and a LO_SUM. */
+ if (riscv_split_symbol (NULL, x, mode, &addr))
+ return riscv_force_address (addr, mode);
+
+ /* Handle BASE + OFFSET using riscv_add_offset. */
+ if (GET_CODE (x) == PLUS && CONST_INT_P (XEXP (x, 1))
+ && INTVAL (XEXP (x, 1)) != 0)
+ {
+ rtx base = XEXP (x, 0);
+ HOST_WIDE_INT offset = INTVAL (XEXP (x, 1));
+
+ if (!riscv_valid_base_register_p (base, mode, false))
+ base = copy_to_mode_reg (Pmode, base);
+ addr = riscv_add_offset (NULL, base, offset);
+ return riscv_force_address (addr, mode);
+ }
+
+ return x;
+}
+
+/* Load VALUE into DEST. TEMP is as for riscv_force_temporary. */
+
+void
+riscv_move_integer (rtx temp, rtx dest, HOST_WIDE_INT value)
+{
+ struct riscv_integer_op codes[RISCV_MAX_INTEGER_OPS];
+ enum machine_mode mode;
+ int i, num_ops;
+ rtx x;
+
+ mode = GET_MODE (dest);
+ num_ops = riscv_build_integer (codes, value, mode);
+
+ if (can_create_pseudo_p () && num_ops > 2 /* not a simple constant */
+ && num_ops >= riscv_split_integer_cost (value))
+ x = riscv_split_integer (value, mode);
+ else
+ {
+ /* Apply each binary operation to X. */
+ x = GEN_INT (codes[0].value);
+
+ for (i = 1; i < num_ops; i++)
+ {
+ if (!can_create_pseudo_p ())
+ {
+ emit_insn (gen_rtx_SET (VOIDmode, temp, x));
+ x = temp;
+ }
+ else
+ x = force_reg (mode, x);
+
+ x = gen_rtx_fmt_ee (codes[i].code, mode, x, GEN_INT (codes[i].value));
+ }
+ }
+
+ emit_insn (gen_rtx_SET (VOIDmode, dest, x));
+}
+
+/* Subroutine of riscv_legitimize_move. Move constant SRC into register
+ DEST given that SRC satisfies immediate_operand but doesn't satisfy
+ move_operand. */
+
+static void
+riscv_legitimize_const_move (enum machine_mode mode, rtx dest, rtx src)
+{
+ rtx base, offset;
+
+ /* Split moves of big integers into smaller pieces. */
+ if (splittable_const_int_operand (src, mode))
+ {
+ riscv_move_integer (dest, dest, INTVAL (src));
+ return;
+ }
+
+ /* Split moves of symbolic constants into high/low pairs. */
+ if (riscv_split_symbol (dest, src, MAX_MACHINE_MODE, &src))
+ {
+ emit_insn (gen_rtx_SET (VOIDmode, dest, src));
+ return;
+ }
+
+ /* Generate the appropriate access sequences for TLS symbols. */
+ if (riscv_tls_symbol_p (src))
+ {
+ riscv_emit_move (dest, riscv_legitimize_tls_address (src));
+ return;
+ }
+
+ /* If we have (const (plus symbol offset)), and that expression cannot
+ be forced into memory, load the symbol first and add in the offset. Also
+ prefer to do this even if the constant _can_ be forced into memory, as it
+ usually produces better code. */
+ split_const (src, &base, &offset);
+ if (offset != const0_rtx
+ && (targetm.cannot_force_const_mem (mode, src) || can_create_pseudo_p ()))
+ {
+ base = riscv_force_temporary (dest, base);
+ riscv_emit_move (dest, riscv_add_offset (NULL, base, INTVAL (offset)));
+ return;
+ }
+
+ src = force_const_mem (mode, src);
+
+ /* When using explicit relocs, constant pool references are sometimes
+ not legitimate addresses. */
+ riscv_split_symbol (dest, XEXP (src, 0), mode, &XEXP (src, 0));
+ riscv_emit_move (dest, src);
+}
+
+/* If (set DEST SRC) is not a valid move instruction, emit an equivalent
+ sequence that is valid. */
+
+bool
+riscv_legitimize_move (enum machine_mode mode, rtx dest, rtx src)
+{
+ if (!register_operand (dest, mode) && !reg_or_0_operand (src, mode))
+ {
+ riscv_emit_move (dest, force_reg (mode, src));
+ return true;
+ }
+
+ /* We need to deal with constants that would be legitimate
+ immediate_operands but aren't legitimate move_operands. */
+ if (CONSTANT_P (src) && !move_operand (src, mode))
+ {
+ riscv_legitimize_const_move (mode, dest, src);
+ set_unique_reg_note (get_last_insn (), REG_EQUAL, copy_rtx (src));
+ return true;
+ }
+ return false;
+}
+
+/* Return true if there is an instruction that implements CODE and accepts
+ X as an immediate operand. */
+
+static int
+riscv_immediate_operand_p (int code, HOST_WIDE_INT x)
+{
+ switch (code)
+ {
+ case ASHIFT:
+ case ASHIFTRT:
+ case LSHIFTRT:
+ /* All shift counts are truncated to a valid constant. */
+ return true;
+
+ case AND:
+ case IOR:
+ case XOR:
+ case PLUS:
+ case LT:
+ case LTU:
+ /* These instructions take 12-bit signed immediates. */
+ return SMALL_OPERAND (x);
+
+ case LE:
+ /* We add 1 to the immediate and use SLT. */
+ return SMALL_OPERAND (x + 1);
+
+ case LEU:
+ /* Likewise SLTU, but reject the always-true case. */
+ return SMALL_OPERAND (x + 1) && x + 1 != 0;
+
+ case GE:
+ case GEU:
+ /* We can emulate an immediate of 1 by using GT/GTU against x0. */
+ return x == 1;
+
+ default:
+ /* By default assume that x0 can be used for 0. */
+ return x == 0;
+ }
+}
+
+/* Return the cost of binary operation X, given that the instruction
+ sequence for a word-sized or smaller operation takes SIGNLE_INSNS
+ instructions and that the sequence of a double-word operation takes
+ DOUBLE_INSNS instructions. */
+
+static int
+riscv_binary_cost (rtx x, int single_insns, int double_insns)
+{
+ if (GET_MODE_SIZE (GET_MODE (x)) == UNITS_PER_WORD * 2)
+ return COSTS_N_INSNS (double_insns);
+ return COSTS_N_INSNS (single_insns);
+}
+
+/* Return the cost of sign-extending OP to mode MODE, not including the
+ cost of OP itself. */
+
+static int
+riscv_sign_extend_cost (enum machine_mode mode, rtx op)
+{
+ if (MEM_P (op))
+ /* Extended loads are as cheap as unextended ones. */
+ return 0;
+
+ if (TARGET_64BIT && mode == DImode && GET_MODE (op) == SImode)
+ /* A sign extension from SImode to DImode in 64-bit mode is free. */
+ return 0;
+
+ /* We need to use a shift left and a shift right. */
+ return COSTS_N_INSNS (2);
+}
+
+/* Return the cost of zero-extending OP to mode MODE, not including the
+ cost of OP itself. */
+
+static int
+riscv_zero_extend_cost (enum machine_mode mode, rtx op)
+{
+ if (MEM_P (op))
+ /* Extended loads are as cheap as unextended ones. */
+ return 0;
+
+ if ((TARGET_64BIT && mode == DImode && GET_MODE (op) == SImode) ||
+ ((mode == DImode || mode == SImode) && GET_MODE (op) == HImode))
+ /* We need a shift left by 32 bits and a shift right by 32 bits. */
+ return COSTS_N_INSNS (2);
+
+ /* We can use ANDI. */
+ return COSTS_N_INSNS (1);
+}
+
+/* Implement TARGET_RTX_COSTS. */
+
+static bool
+riscv_rtx_costs (rtx x, int code, int outer_code, int opno ATTRIBUTE_UNUSED,
+ int *total, bool speed)
+{
+ enum machine_mode mode = GET_MODE (x);
+ bool float_mode_p = FLOAT_MODE_P (mode);
+ int cost;
+
+ switch (code)
+ {
+ case CONST_INT:
+ if (riscv_immediate_operand_p (outer_code, INTVAL (x)))
+ {
+ *total = 0;
+ return true;
+ }
+ /* Fall through. */
+
+ case SYMBOL_REF:
+ case LABEL_REF:
+ case CONST_DOUBLE:
+ case CONST:
+ if (speed)
+ *total = 1;
+ else if ((cost = riscv_const_insns (x)) > 0)
+ *total = COSTS_N_INSNS (cost);
+ else /* The instruction will be fetched from the constant pool. */
+ *total = COSTS_N_INSNS (riscv_symbol_insns (SYMBOL_ABSOLUTE));
+ return true;
+
+ case MEM:
+ /* If the address is legitimate, return the number of
+ instructions it needs. */
+ if ((cost = riscv_address_insns (XEXP (x, 0), mode, true)) > 0)
+ {
+ *total = COSTS_N_INSNS (cost + tune_info->memory_cost);
+ return true;
+ }
+ /* Otherwise use the default handling. */
+ return false;
+
+ case NOT:
+ *total = COSTS_N_INSNS (GET_MODE_SIZE (mode) > UNITS_PER_WORD ? 2 : 1);
+ return false;
+
+ case AND:
+ case IOR:
+ case XOR:
+ /* Double-word operations use two single-word operations. */
+ *total = riscv_binary_cost (x, 1, 2);
+ return false;
+
+ case ASHIFT:
+ case ASHIFTRT:
+ case LSHIFTRT:
+ *total = riscv_binary_cost (x, 1, CONSTANT_P (XEXP (x, 1)) ? 4 : 9);
+ return false;
+
+ case ABS:
+ *total = COSTS_N_INSNS (float_mode_p ? 1 : 3);
+ return false;
+
+ case LO_SUM:
+ *total = set_src_cost (XEXP (x, 0), speed);
+ return true;
+
+ case LT:
+ case LTU:
+ case LE:
+ case LEU:
+ case GT:
+ case GTU:
+ case GE:
+ case GEU:
+ case EQ:
+ case NE:
+ case UNORDERED:
+ case LTGT:
+ /* Branch comparisons have VOIDmode, so use the first operand's
+ mode instead. */
+ mode = GET_MODE (XEXP (x, 0));
+ if (float_mode_p)
+ *total = tune_info->fp_add[mode == DFmode];
+ else
+ *total = riscv_binary_cost (x, 1, 3);
+ return false;
+
+ case MINUS:
+ if (float_mode_p
+ && !HONOR_NANS (mode)
+ && !HONOR_SIGNED_ZEROS (mode))
+ {
+ /* See if we can use NMADD or NMSUB. See riscv.md for the
+ associated patterns. */
+ rtx op0 = XEXP (x, 0);
+ rtx op1 = XEXP (x, 1);
+ if (GET_CODE (op0) == MULT && GET_CODE (XEXP (op0, 0)) == NEG)
+ {
+ *total = (tune_info->fp_mul[mode == DFmode]
+ + set_src_cost (XEXP (XEXP (op0, 0), 0), speed)
+ + set_src_cost (XEXP (op0, 1), speed)
+ + set_src_cost (op1, speed));
+ return true;
+ }
+ if (GET_CODE (op1) == MULT)
+ {
+ *total = (tune_info->fp_mul[mode == DFmode]
+ + set_src_cost (op0, speed)
+ + set_src_cost (XEXP (op1, 0), speed)
+ + set_src_cost (XEXP (op1, 1), speed));
+ return true;
+ }
+ }
+ /* Fall through. */
+
+ case PLUS:
+ if (float_mode_p)
+ *total = tune_info->fp_add[mode == DFmode];
+ else
+ *total = riscv_binary_cost (x, 1, 4);
+ return false;
+
+ case NEG:
+ if (float_mode_p
+ && !HONOR_NANS (mode)
+ && HONOR_SIGNED_ZEROS (mode))
+ {
+ /* See if we can use NMADD or NMSUB. See riscv.md for the
+ associated patterns. */
+ rtx op = XEXP (x, 0);
+ if ((GET_CODE (op) == PLUS || GET_CODE (op) == MINUS)
+ && GET_CODE (XEXP (op, 0)) == MULT)
+ {
+ *total = (tune_info->fp_mul[mode == DFmode]
+ + set_src_cost (XEXP (XEXP (op, 0), 0), speed)
+ + set_src_cost (XEXP (XEXP (op, 0), 1), speed)
+ + set_src_cost (XEXP (op, 1), speed));
+ return true;
+ }
+ }
+
+ if (float_mode_p)
+ *total = tune_info->fp_add[mode == DFmode];
+ else
+ *total = COSTS_N_INSNS (GET_MODE_SIZE (mode) > UNITS_PER_WORD ? 4 : 1);
+ return false;
+
+ case MULT:
+ if (float_mode_p)
+ *total = tune_info->fp_mul[mode == DFmode];
+ else if (GET_MODE_SIZE (mode) > UNITS_PER_WORD)
+ *total = 3 * tune_info->int_mul[0] + COSTS_N_INSNS (2);
+ else if (!speed)
+ *total = COSTS_N_INSNS (1);
+ else
+ *total = tune_info->int_mul[mode == DImode];
+ return false;
+
+ case DIV:
+ case SQRT:
+ case MOD:
+ if (float_mode_p)
+ {
+ *total = tune_info->fp_div[mode == DFmode];
+ return false;
+ }
+ /* Fall through. */
+
+ case UDIV:
+ case UMOD:
+ if (speed)
+ *total = tune_info->int_div[mode == DImode];
+ else
+ *total = COSTS_N_INSNS (1);
+ return false;
+
+ case SIGN_EXTEND:
+ *total = riscv_sign_extend_cost (mode, XEXP (x, 0));
+ return false;
+
+ case ZERO_EXTEND:
+ *total = riscv_zero_extend_cost (mode, XEXP (x, 0));
+ return false;
+
+ case FLOAT:
+ case UNSIGNED_FLOAT:
+ case FIX:
+ case FLOAT_EXTEND:
+ case FLOAT_TRUNCATE:
+ *total = tune_info->fp_add[mode == DFmode];
+ return false;
+
+ default:
+ return false;
+ }
+}
+
+/* Implement TARGET_ADDRESS_COST. */
+
+static int
+riscv_address_cost (rtx addr, enum machine_mode mode,
+ addr_space_t as ATTRIBUTE_UNUSED,
+ bool speed ATTRIBUTE_UNUSED)
+{
+ return riscv_address_insns (addr, mode, false);
+}
+
+/* Return one word of double-word value OP. HIGH_P is true to select the
+ high part or false to select the low part. */
+
+rtx
+riscv_subword (rtx op, bool high_p)
+{
+ unsigned int byte;
+ enum machine_mode mode;
+
+ mode = GET_MODE (op);
+ if (mode == VOIDmode)
+ mode = TARGET_64BIT ? TImode : DImode;
+
+ byte = high_p ? UNITS_PER_WORD : 0;
+
+ if (FP_REG_RTX_P (op))
+ return gen_rtx_REG (word_mode, REGNO (op) + high_p);
+
+ if (MEM_P (op))
+ return adjust_address (op, word_mode, byte);
+
+ return simplify_gen_subreg (word_mode, op, mode, byte);
+}
+
+/* Return true if a 64-bit move from SRC to DEST should be split into two. */
+
+bool
+riscv_split_64bit_move_p (rtx dest, rtx src)
+{
+ /* All 64b moves are legal in 64b mode. All 64b FPR <-> FPR and
+ FPR <-> MEM moves are legal in 32b mode, too. Although
+ FPR <-> GPR moves are not available in general in 32b mode,
+ we can at least load 0 into an FPR with fcvt.d.w fpr, x0. */
+ return !(TARGET_64BIT
+ || (FP_REG_RTX_P (src) && FP_REG_RTX_P (dest))
+ || (FP_REG_RTX_P (dest) && MEM_P (src))
+ || (FP_REG_RTX_P (src) && MEM_P (dest))
+ || (FP_REG_RTX_P(dest) && src == CONST0_RTX(GET_MODE(src))));
+}
+
+/* Split a doubleword move from SRC to DEST. On 32-bit targets,
+ this function handles 64-bit moves for which riscv_split_64bit_move_p
+ holds. For 64-bit targets, this function handles 128-bit moves. */
+
+void
+riscv_split_doubleword_move (rtx dest, rtx src)
+{
+ rtx low_dest;
+
+ /* The operation can be split into two normal moves. Decide in
+ which order to do them. */
+ low_dest = riscv_subword (dest, false);
+ if (REG_P (low_dest) && reg_overlap_mentioned_p (low_dest, src))
+ {
+ riscv_emit_move (riscv_subword (dest, true), riscv_subword (src, true));
+ riscv_emit_move (low_dest, riscv_subword (src, false));
+ }
+ else
+ {
+ riscv_emit_move (low_dest, riscv_subword (src, false));
+ riscv_emit_move (riscv_subword (dest, true), riscv_subword (src, true));
+ }
+}
+
+/* Return the appropriate instructions to move SRC into DEST. Assume
+ that SRC is operand 1 and DEST is operand 0. */
+
+const char *
+riscv_output_move (rtx dest, rtx src)
+{
+ enum rtx_code dest_code, src_code;
+ enum machine_mode mode;
+ bool dbl_p;
+
+ dest_code = GET_CODE (dest);
+ src_code = GET_CODE (src);
+ mode = GET_MODE (dest);
+ dbl_p = (GET_MODE_SIZE (mode) == 8);
+
+ if (dbl_p && riscv_split_64bit_move_p (dest, src))
+ return "#";
+
+ if ((src_code == REG && GP_REG_P (REGNO (src)))
+ || (src == CONST0_RTX (mode)))
+ {
+ if (dest_code == REG)
+ {
+ if (GP_REG_P (REGNO (dest)))
+ return "mv\t%0,%z1";
+
+ if (FP_REG_P (REGNO (dest)))
+ {
+ if (!dbl_p)
+ return "fmv.s.x\t%0,%z1";
+ if (TARGET_64BIT)
+ return "fmv.d.x\t%0,%z1";
+ /* in RV32, we can emulate fmv.d.x %0, x0 using fcvt.d.w */
+ gcc_assert (src == CONST0_RTX (mode));
+ return "fcvt.d.w\t%0,x0";
+ }
+ }
+ if (dest_code == MEM)
+ switch (GET_MODE_SIZE (mode))
+ {
+ case 1: return "sb\t%z1,%0";
+ case 2: return "sh\t%z1,%0";
+ case 4: return "sw\t%z1,%0";
+ case 8: return "sd\t%z1,%0";
+ }
+ }
+ if (dest_code == REG && GP_REG_P (REGNO (dest)))
+ {
+ if (src_code == REG)
+ {
+ if (FP_REG_P (REGNO (src)))
+ return dbl_p ? "fmv.x.d\t%0,%1" : "fmv.x.s\t%0,%1";
+ }
+
+ if (src_code == MEM)
+ switch (GET_MODE_SIZE (mode))
+ {
+ case 1: return "lbu\t%0,%1";
+ case 2: return "lhu\t%0,%1";
+ case 4: return "lw\t%0,%1";
+ case 8: return "ld\t%0,%1";
+ }
+
+ if (src_code == CONST_INT)
+ return "li\t%0,%1";
+
+ if (src_code == HIGH)
+ return "lui\t%0,%h1";
+
+ if (symbolic_operand (src, VOIDmode))
+ switch (riscv_classify_symbolic_expression (src))
+ {
+ case SYMBOL_GOT_DISP: return "la\t%0,%1";
+ case SYMBOL_ABSOLUTE: return "lla\t%0,%1";
+ default: gcc_unreachable();
+ }
+ }
+ if (src_code == REG && FP_REG_P (REGNO (src)))
+ {
+ if (dest_code == REG && FP_REG_P (REGNO (dest)))
+ return dbl_p ? "fmv.d\t%0,%1" : "fmv.s\t%0,%1";
+
+ if (dest_code == MEM)
+ return dbl_p ? "fsd\t%1,%0" : "fsw\t%1,%0";
+ }
+ if (dest_code == REG && FP_REG_P (REGNO (dest)))
+ {
+ if (src_code == MEM)
+ return dbl_p ? "fld\t%0,%1" : "flw\t%0,%1";
+ }
+ gcc_unreachable ();
+}
+
+/* Return true if CMP1 is a suitable second operand for integer ordering
+ test CODE. See also the *sCC patterns in riscv.md. */
+
+static bool
+riscv_int_order_operand_ok_p (enum rtx_code code, rtx cmp1)
+{
+ switch (code)
+ {
+ case GT:
+ case GTU:
+ return reg_or_0_operand (cmp1, VOIDmode);
+
+ case GE:
+ case GEU:
+ return cmp1 == const1_rtx;
+
+ case LT:
+ case LTU:
+ return arith_operand (cmp1, VOIDmode);
+
+ case LE:
+ return sle_operand (cmp1, VOIDmode);
+
+ case LEU:
+ return sleu_operand (cmp1, VOIDmode);
+
+ default:
+ gcc_unreachable ();
+ }
+}
+
+/* Return true if *CMP1 (of mode MODE) is a valid second operand for
+ integer ordering test *CODE, or if an equivalent combination can
+ be formed by adjusting *CODE and *CMP1. When returning true, update
+ *CODE and *CMP1 with the chosen code and operand, otherwise leave
+ them alone. */
+
+static bool
+riscv_canonicalize_int_order_test (enum rtx_code *code, rtx *cmp1,
+ enum machine_mode mode)
+{
+ HOST_WIDE_INT plus_one;
+
+ if (riscv_int_order_operand_ok_p (*code, *cmp1))
+ return true;
+
+ if (CONST_INT_P (*cmp1))
+ switch (*code)
+ {
+ case LE:
+ plus_one = trunc_int_for_mode (UINTVAL (*cmp1) + 1, mode);
+ if (INTVAL (*cmp1) < plus_one)
+ {
+ *code = LT;
+ *cmp1 = force_reg (mode, GEN_INT (plus_one));
+ return true;
+ }
+ break;
+
+ case LEU:
+ plus_one = trunc_int_for_mode (UINTVAL (*cmp1) + 1, mode);
+ if (plus_one != 0)
+ {
+ *code = LTU;
+ *cmp1 = force_reg (mode, GEN_INT (plus_one));
+ return true;
+ }
+ break;
+
+ default:
+ break;
+ }
+ return false;
+}
+
+/* Compare CMP0 and CMP1 using ordering test CODE and store the result
+ in TARGET. CMP0 and TARGET are register_operands. If INVERT_PTR
+ is nonnull, it's OK to set TARGET to the inverse of the result and
+ flip *INVERT_PTR instead. */
+
+static void
+riscv_emit_int_order_test (enum rtx_code code, bool *invert_ptr,
+ rtx target, rtx cmp0, rtx cmp1)
+{
+ enum machine_mode mode;
+
+ /* First see if there is a RISCV instruction that can do this operation.
+ If not, try doing the same for the inverse operation. If that also
+ fails, force CMP1 into a register and try again. */
+ mode = GET_MODE (cmp0);
+ if (riscv_canonicalize_int_order_test (&code, &cmp1, mode))
+ riscv_emit_binary (code, target, cmp0, cmp1);
+ else
+ {
+ enum rtx_code inv_code = reverse_condition (code);
+ if (!riscv_canonicalize_int_order_test (&inv_code, &cmp1, mode))
+ {
+ cmp1 = force_reg (mode, cmp1);
+ riscv_emit_int_order_test (code, invert_ptr, target, cmp0, cmp1);
+ }
+ else if (invert_ptr == 0)
+ {
+ rtx inv_target;
+
+ inv_target = riscv_force_binary (GET_MODE (target),
+ inv_code, cmp0, cmp1);
+ riscv_emit_binary (XOR, target, inv_target, const1_rtx);
+ }
+ else
+ {
+ *invert_ptr = !*invert_ptr;
+ riscv_emit_binary (inv_code, target, cmp0, cmp1);
+ }
+ }
+}
+
+/* Return a register that is zero iff CMP0 and CMP1 are equal.
+ The register will have the same mode as CMP0. */
+
+static rtx
+riscv_zero_if_equal (rtx cmp0, rtx cmp1)
+{
+ if (cmp1 == const0_rtx)
+ return cmp0;
+
+ return expand_binop (GET_MODE (cmp0), sub_optab,
+ cmp0, cmp1, 0, 0, OPTAB_DIRECT);
+}
+
+/* Return false if we can easily emit code for the FP comparison specified
+ by *CODE. If not, set *CODE to its inverse and return true. */
+
+static bool
+riscv_reversed_fp_cond (enum rtx_code *code)
+{
+ switch (*code)
+ {
+ case EQ:
+ case LT:
+ case LE:
+ case GT:
+ case GE:
+ case LTGT:
+ case ORDERED:
+ /* We know how to emit code for these cases... */
+ return false;
+
+ default:
+ /* ...but we must invert these and rely on the others. */
+ *code = reverse_condition_maybe_unordered (*code);
+ return true;
+ }
+}
+
+/* Convert a comparison into something that can be used in a branch or
+ conditional move. On entry, *OP0 and *OP1 are the values being
+ compared and *CODE is the code used to compare them.
+
+ Update *CODE, *OP0 and *OP1 so that they describe the final comparison. */
+
+static void
+riscv_emit_compare (enum rtx_code *code, rtx *op0, rtx *op1)
+{
+ rtx cmp_op0 = *op0;
+ rtx cmp_op1 = *op1;
+
+ if (GET_MODE_CLASS (GET_MODE (*op0)) == MODE_INT)
+ {
+ if (splittable_const_int_operand (cmp_op1, VOIDmode))
+ {
+ HOST_WIDE_INT rhs = INTVAL (cmp_op1), new_rhs;
+ enum rtx_code new_code;
+
+ switch (*code)
+ {
+ case LTU: new_rhs = rhs - 1; new_code = LEU; goto try_new_rhs;
+ case LEU: new_rhs = rhs + 1; new_code = LTU; goto try_new_rhs;
+ case GTU: new_rhs = rhs + 1; new_code = GEU; goto try_new_rhs;
+ case GEU: new_rhs = rhs - 1; new_code = GTU; goto try_new_rhs;
+ case LT: new_rhs = rhs - 1; new_code = LE; goto try_new_rhs;
+ case LE: new_rhs = rhs + 1; new_code = LT; goto try_new_rhs;
+ case GT: new_rhs = rhs + 1; new_code = GE; goto try_new_rhs;
+ case GE: new_rhs = rhs - 1; new_code = GT;
+ try_new_rhs:
+ /* Convert e.g. OP0 > 4095 into OP0 >= 4096. */
+ if ((rhs < 0) == (new_rhs < 0)
+ && riscv_integer_cost (new_rhs) < riscv_integer_cost (rhs))
+ {
+ *op1 = GEN_INT (new_rhs);
+ *code = new_code;
+ }
+ break;
+
+ case EQ:
+ case NE:
+ /* Convert e.g. OP0 == 2048 into OP0 - 2048 == 0. */
+ if (SMALL_OPERAND (-rhs))
+ {
+ *op0 = gen_reg_rtx (GET_MODE (cmp_op0));
+ riscv_emit_binary (PLUS, *op0, cmp_op0, GEN_INT (-rhs));
+ *op1 = const0_rtx;
+ }
+ default:
+ break;
+ }
+ }
+
+ if (*op1 != const0_rtx)
+ *op1 = force_reg (GET_MODE (cmp_op0), *op1);
+ }
+ else
+ {
+ /* For FP comparisons, set an integer register with the result of the
+ comparison, then branch on it. */
+ rtx tmp0, tmp1, final_op;
+ enum rtx_code fp_code = *code;
+ *code = riscv_reversed_fp_cond (&fp_code) ? EQ : NE;
+
+ switch (fp_code)
+ {
+ case ORDERED:
+ /* a == a && b == b */
+ tmp0 = gen_reg_rtx (SImode);
+ riscv_emit_binary (EQ, tmp0, cmp_op0, cmp_op0);
+ tmp1 = gen_reg_rtx (SImode);
+ riscv_emit_binary (EQ, tmp1, cmp_op1, cmp_op1);
+ final_op = gen_reg_rtx (SImode);
+ riscv_emit_binary (AND, final_op, tmp0, tmp1);
+ break;
+
+ case LTGT:
+ /* a < b || a > b */
+ tmp0 = gen_reg_rtx (SImode);
+ riscv_emit_binary (LT, tmp0, cmp_op0, cmp_op1);
+ tmp1 = gen_reg_rtx (SImode);
+ riscv_emit_binary (GT, tmp1, cmp_op0, cmp_op1);
+ final_op = gen_reg_rtx (SImode);
+ riscv_emit_binary (IOR, final_op, tmp0, tmp1);
+ break;
+
+ case EQ:
+ case LE:
+ case LT:
+ case GE:
+ case GT:
+ /* We have instructions for these cases. */
+ final_op = gen_reg_rtx (SImode);
+ riscv_emit_binary (fp_code, final_op, cmp_op0, cmp_op1);
+ break;
+
+ default:
+ gcc_unreachable ();
+ }
+
+ /* Compare the binary result against 0. */
+ *op0 = final_op;
+ *op1 = const0_rtx;
+ }
+}
+
+/* Try performing the comparison in OPERANDS[1], whose arms are OPERANDS[2]
+ and OPERAND[3]. Store the result in OPERANDS[0].
+
+ On 64-bit targets, the mode of the comparison and target will always be
+ SImode, thus possibly narrower than that of the comparison's operands. */
+
+void
+riscv_expand_scc (rtx operands[])
+{
+ rtx target = operands[0];
+ enum rtx_code code = GET_CODE (operands[1]);
+ rtx op0 = operands[2];
+ rtx op1 = operands[3];
+
+ gcc_assert (GET_MODE_CLASS (GET_MODE (op0)) == MODE_INT);
+
+ if (code == EQ || code == NE)
+ {
+ rtx zie = riscv_zero_if_equal (op0, op1);
+ riscv_emit_binary (code, target, zie, const0_rtx);
+ }
+ else
+ riscv_emit_int_order_test (code, 0, target, op0, op1);
+}
+
+/* Compare OPERANDS[1] with OPERANDS[2] using comparison code
+ CODE and jump to OPERANDS[3] if the condition holds. */
+
+void
+riscv_expand_conditional_branch (rtx *operands)
+{
+ enum rtx_code code = GET_CODE (operands[0]);
+ rtx op0 = operands[1];
+ rtx op1 = operands[2];
+ rtx condition;
+
+ riscv_emit_compare (&code, &op0, &op1);
+ condition = gen_rtx_fmt_ee (code, VOIDmode, op0, op1);
+ emit_jump_insn (gen_condjump (condition, operands[3]));
+}
+
+/* Implement TARGET_FUNCTION_ARG_BOUNDARY. Every parameter gets at
+ least PARM_BOUNDARY bits of alignment, but will be given anything up
+ to STACK_BOUNDARY bits if the type requires it. */
+
+static unsigned int
+riscv_function_arg_boundary (enum machine_mode mode, const_tree type)
+{
+ unsigned int alignment;
+
+ alignment = type ? TYPE_ALIGN (type) : GET_MODE_ALIGNMENT (mode);
+ if (alignment < PARM_BOUNDARY)
+ alignment = PARM_BOUNDARY;
+ if (alignment > STACK_BOUNDARY)
+ alignment = STACK_BOUNDARY;
+ return alignment;
+}
+
+/* Fill INFO with information about a single argument. CUM is the
+ cumulative state for earlier arguments. MODE is the mode of this
+ argument and TYPE is its type (if known). NAMED is true if this
+ is a named (fixed) argument rather than a variable one. */
+
+static void
+riscv_get_arg_info (struct riscv_arg_info *info, const CUMULATIVE_ARGS *cum,
+ enum machine_mode mode, const_tree type, bool named)
+{
+ bool doubleword_aligned_p;
+ unsigned int num_bytes, num_words, max_regs;
+
+ /* Work out the size of the argument. */
+ num_bytes = type ? int_size_in_bytes (type) : GET_MODE_SIZE (mode);
+ num_words = (num_bytes + UNITS_PER_WORD - 1) / UNITS_PER_WORD;
+
+ /* Scalar, complex and vector floating-point types are passed in
+ floating-point registers, as long as this is a named rather
+ than a variable argument. */
+ info->fpr_p = (named
+ && (type == 0 || FLOAT_TYPE_P (type))
+ && (GET_MODE_CLASS (mode) == MODE_FLOAT
+ || GET_MODE_CLASS (mode) == MODE_COMPLEX_FLOAT
+ || GET_MODE_CLASS (mode) == MODE_VECTOR_FLOAT)
+ && GET_MODE_UNIT_SIZE (mode) <= UNITS_PER_FPVALUE);
+
+ /* Complex floats should only go into FPRs if there are two FPRs free,
+ otherwise they should be passed in the same way as a struct
+ containing two floats. */
+ if (info->fpr_p
+ && GET_MODE_CLASS (mode) == MODE_COMPLEX_FLOAT
+ && GET_MODE_UNIT_SIZE (mode) < UNITS_PER_FPVALUE)
+ {
+ if (cum->num_gprs >= MAX_ARGS_IN_REGISTERS - 1)
+ info->fpr_p = false;
+ else
+ num_words = 2;
+ }
+
+ /* See whether the argument has doubleword alignment. */
+ doubleword_aligned_p = (riscv_function_arg_boundary (mode, type)
+ > BITS_PER_WORD);
+
+ /* Set REG_OFFSET to the register count we're interested in.
+ The EABI allocates the floating-point registers separately,
+ but the other ABIs allocate them like integer registers. */
+ info->reg_offset = cum->num_gprs;
+
+ /* Advance to an even register if the argument is doubleword-aligned. */
+ if (doubleword_aligned_p)
+ info->reg_offset += info->reg_offset & 1;
+
+ /* Work out the offset of a stack argument. */
+ info->stack_offset = cum->stack_words;
+ if (doubleword_aligned_p)
+ info->stack_offset += info->stack_offset & 1;
+
+ max_regs = MAX_ARGS_IN_REGISTERS - info->reg_offset;
+
+ /* Partition the argument between registers and stack. */
+ info->reg_words = MIN (num_words, max_regs);
+ info->stack_words = num_words - info->reg_words;
+}
+
+/* INFO describes a register argument that has the normal format for the
+ argument's mode. Return the register it uses, assuming that FPRs are
+ available if HARD_FLOAT_P. */
+
+static unsigned int
+riscv_arg_regno (const struct riscv_arg_info *info, bool hard_float_p)
+{
+ if (!info->fpr_p || !hard_float_p)
+ return GP_ARG_FIRST + info->reg_offset;
+ else
+ return FP_ARG_FIRST + info->reg_offset;
+}
+
+/* Implement TARGET_FUNCTION_ARG. */
+
+static rtx
+riscv_function_arg (cumulative_args_t cum_v, enum machine_mode mode,
+ const_tree type, bool named)
+{
+ CUMULATIVE_ARGS *cum = get_cumulative_args (cum_v);
+ struct riscv_arg_info info;
+
+ if (mode == VOIDmode)
+ return NULL;
+
+ riscv_get_arg_info (&info, cum, mode, type, named);
+
+ /* Return straight away if the whole argument is passed on the stack. */
+ if (info.reg_offset == MAX_ARGS_IN_REGISTERS)
+ return NULL;
+
+ /* The n32 and n64 ABIs say that if any 64-bit chunk of the structure
+ contains a double in its entirety, then that 64-bit chunk is passed
+ in a floating-point register. */
+ if (TARGET_HARD_FLOAT
+ && named
+ && type != 0
+ && TREE_CODE (type) == RECORD_TYPE
+ && TYPE_SIZE_UNIT (type)
+ && tree_fits_uhwi_p (TYPE_SIZE_UNIT (type)))
+ {
+ tree field;
+
+ /* First check to see if there is any such field. */
+ for (field = TYPE_FIELDS (type); field; field = DECL_CHAIN (field))
+ if (TREE_CODE (field) == FIELD_DECL
+ && SCALAR_FLOAT_TYPE_P (TREE_TYPE (field))
+ && TYPE_PRECISION (TREE_TYPE (field)) == BITS_PER_WORD
+ && tree_fits_shwi_p (bit_position (field))
+ && int_bit_position (field) % BITS_PER_WORD == 0)
+ break;
+
+ if (field != 0)
+ {
+ /* Now handle the special case by returning a PARALLEL
+ indicating where each 64-bit chunk goes. INFO.REG_WORDS
+ chunks are passed in registers. */
+ unsigned int i;
+ HOST_WIDE_INT bitpos;
+ rtx ret;
+
+ /* assign_parms checks the mode of ENTRY_PARM, so we must
+ use the actual mode here. */
+ ret = gen_rtx_PARALLEL (mode, rtvec_alloc (info.reg_words));
+
+ bitpos = 0;
+ field = TYPE_FIELDS (type);
+ for (i = 0; i < info.reg_words; i++)
+ {
+ rtx reg;
+
+ for (; field; field = DECL_CHAIN (field))
+ if (TREE_CODE (field) == FIELD_DECL
+ && int_bit_position (field) >= bitpos)
+ break;
+
+ if (field
+ && int_bit_position (field) == bitpos
+ && SCALAR_FLOAT_TYPE_P (TREE_TYPE (field))
+ && TYPE_PRECISION (TREE_TYPE (field)) == BITS_PER_WORD)
+ reg = gen_rtx_REG (DFmode, FP_ARG_FIRST + info.reg_offset + i);
+ else
+ reg = gen_rtx_REG (DImode, GP_ARG_FIRST + info.reg_offset + i);
+
+ XVECEXP (ret, 0, i)
+ = gen_rtx_EXPR_LIST (VOIDmode, reg,
+ GEN_INT (bitpos / BITS_PER_UNIT));
+
+ bitpos += BITS_PER_WORD;
+ }
+ return ret;
+ }
+ }
+
+ /* Handle the n32/n64 conventions for passing complex floating-point
+ arguments in FPR pairs. The real part goes in the lower register
+ and the imaginary part goes in the upper register. */
+ if (info.fpr_p
+ && GET_MODE_CLASS (mode) == MODE_COMPLEX_FLOAT)
+ {
+ rtx real, imag;
+ enum machine_mode inner;
+ unsigned int regno;
+
+ inner = GET_MODE_INNER (mode);
+ regno = FP_ARG_FIRST + info.reg_offset;
+ if (info.reg_words * UNITS_PER_WORD == GET_MODE_SIZE (inner))
+ {
+ /* Real part in registers, imaginary part on stack. */
+ gcc_assert (info.stack_words == info.reg_words);
+ return gen_rtx_REG (inner, regno);
+ }
+ else
+ {
+ gcc_assert (info.stack_words == 0);
+ real = gen_rtx_EXPR_LIST (VOIDmode,
+ gen_rtx_REG (inner, regno),
+ const0_rtx);
+ imag = gen_rtx_EXPR_LIST (VOIDmode,
+ gen_rtx_REG (inner,
+ regno + info.reg_words / 2),
+ GEN_INT (GET_MODE_SIZE (inner)));
+ return gen_rtx_PARALLEL (mode, gen_rtvec (2, real, imag));
+ }
+ }
+
+ return gen_rtx_REG (mode, riscv_arg_regno (&info, TARGET_HARD_FLOAT));
+}
+
+/* Implement TARGET_FUNCTION_ARG_ADVANCE. */
+
+static void
+riscv_function_arg_advance (cumulative_args_t cum_v, enum machine_mode mode,
+ const_tree type, bool named)
+{
+ CUMULATIVE_ARGS *cum = get_cumulative_args (cum_v);
+ struct riscv_arg_info info;
+
+ riscv_get_arg_info (&info, cum, mode, type, named);
+
+ /* Advance the register count. This has the effect of setting
+ num_gprs to MAX_ARGS_IN_REGISTERS if a doubleword-aligned
+ argument required us to skip the final GPR and pass the whole
+ argument on the stack. */
+ cum->num_gprs = info.reg_offset + info.reg_words;
+
+ /* Advance the stack word count. */
+ if (info.stack_words > 0)
+ cum->stack_words = info.stack_offset + info.stack_words;
+}
+
+/* Implement TARGET_ARG_PARTIAL_BYTES. */
+
+static int
+riscv_arg_partial_bytes (cumulative_args_t cum,
+ enum machine_mode mode, tree type, bool named)
+{
+ struct riscv_arg_info info;
+
+ riscv_get_arg_info (&info, get_cumulative_args (cum), mode, type, named);
+ return info.stack_words > 0 ? info.reg_words * UNITS_PER_WORD : 0;
+}
+
+/* See whether VALTYPE is a record whose fields should be returned in
+ floating-point registers. If so, return the number of fields and
+ list them in FIELDS (which should have two elements). Return 0
+ otherwise.
+
+ For n32 & n64, a structure with one or two fields is returned in
+ floating-point registers as long as every field has a floating-point
+ type. */
+
+static int
+riscv_fpr_return_fields (const_tree valtype, tree *fields)
+{
+ tree field;
+ int i;
+
+ if (TREE_CODE (valtype) != RECORD_TYPE)
+ return 0;
+
+ i = 0;
+ for (field = TYPE_FIELDS (valtype); field != 0; field = DECL_CHAIN (field))
+ {
+ if (TREE_CODE (field) != FIELD_DECL)
+ continue;
+
+ if (!SCALAR_FLOAT_TYPE_P (TREE_TYPE (field)))
+ return 0;
+
+ if (i == 2)
+ return 0;
+
+ fields[i++] = field;
+ }
+ return i;
+}
+
+/* Return true if the function return value MODE will get returned in a
+ floating-point register. */
+
+static bool
+riscv_return_mode_in_fpr_p (enum machine_mode mode)
+{
+ return ((GET_MODE_CLASS (mode) == MODE_FLOAT
+ || GET_MODE_CLASS (mode) == MODE_VECTOR_FLOAT
+ || GET_MODE_CLASS (mode) == MODE_COMPLEX_FLOAT)
+ && GET_MODE_UNIT_SIZE (mode) <= UNITS_PER_HWFPVALUE);
+}
+
+/* Return the representation of an FPR return register when the
+ value being returned in FP_RETURN has mode VALUE_MODE and the
+ return type itself has mode TYPE_MODE. On NewABI targets,
+ the two modes may be different for structures like:
+
+ struct __attribute__((packed)) foo { float f; }
+
+ where we return the SFmode value of "f" in FP_RETURN, but where
+ the structure itself has mode BLKmode. */
+
+static rtx
+riscv_return_fpr_single (enum machine_mode type_mode,
+ enum machine_mode value_mode)
+{
+ rtx x;
+
+ x = gen_rtx_REG (value_mode, FP_RETURN);
+ if (type_mode != value_mode)
+ {
+ x = gen_rtx_EXPR_LIST (VOIDmode, x, const0_rtx);
+ x = gen_rtx_PARALLEL (type_mode, gen_rtvec (1, x));
+ }
+ return x;
+}
+
+/* Return a composite value in a pair of floating-point registers.
+ MODE1 and OFFSET1 are the mode and byte offset for the first value,
+ likewise MODE2 and OFFSET2 for the second. MODE is the mode of the
+ complete value.
+
+ For n32 & n64, $f0 always holds the first value and $f2 the second.
+ Otherwise the values are packed together as closely as possible. */
+
+static rtx
+riscv_return_fpr_pair (enum machine_mode mode,
+ enum machine_mode mode1, HOST_WIDE_INT offset1,
+ enum machine_mode mode2, HOST_WIDE_INT offset2)
+{
+ return gen_rtx_PARALLEL
+ (mode,
+ gen_rtvec (2,
+ gen_rtx_EXPR_LIST (VOIDmode,
+ gen_rtx_REG (mode1, FP_RETURN),
+ GEN_INT (offset1)),
+ gen_rtx_EXPR_LIST (VOIDmode,
+ gen_rtx_REG (mode2, FP_RETURN + 1),
+ GEN_INT (offset2))));
+
+}
+
+/* Implement FUNCTION_VALUE and LIBCALL_VALUE. For normal calls,
+ VALTYPE is the return type and MODE is VOIDmode. For libcalls,
+ VALTYPE is null and MODE is the mode of the return value. */
+
+rtx
+riscv_function_value (const_tree valtype, const_tree func, enum machine_mode mode)
+{
+ if (valtype)
+ {
+ tree fields[2];
+ int unsigned_p;
+
+ mode = TYPE_MODE (valtype);
+ unsigned_p = TYPE_UNSIGNED (valtype);
+
+ /* Since TARGET_PROMOTE_FUNCTION_MODE unconditionally promotes,
+ return values, promote the mode here too. */
+ mode = promote_function_mode (valtype, mode, &unsigned_p, func, 1);
+
+ /* Handle structures whose fields are returned in $f0/$f2. */
+ switch (riscv_fpr_return_fields (valtype, fields))
+ {
+ case 1:
+ return riscv_return_fpr_single (mode,
+ TYPE_MODE (TREE_TYPE (fields[0])));
+
+ case 2:
+ return riscv_return_fpr_pair (mode,
+ TYPE_MODE (TREE_TYPE (fields[0])),
+ int_byte_position (fields[0]),
+ TYPE_MODE (TREE_TYPE (fields[1])),
+ int_byte_position (fields[1]));
+ }
+
+ /* Only use FPRs for scalar, complex or vector types. */
+ if (!FLOAT_TYPE_P (valtype))
+ return gen_rtx_REG (mode, GP_RETURN);
+ }
+
+ /* Handle long doubles for n32 & n64. */
+ if (mode == TFmode)
+ return riscv_return_fpr_pair (mode,
+ DImode, 0,
+ DImode, GET_MODE_SIZE (mode) / 2);
+
+ if (riscv_return_mode_in_fpr_p (mode))
+ {
+ if (GET_MODE_CLASS (mode) == MODE_COMPLEX_FLOAT)
+ return riscv_return_fpr_pair (mode,
+ GET_MODE_INNER (mode), 0,
+ GET_MODE_INNER (mode),
+ GET_MODE_SIZE (mode) / 2);
+ else
+ return gen_rtx_REG (mode, FP_RETURN);
+ }
+
+ return gen_rtx_REG (mode, GP_RETURN);
+}
+
+/* Implement TARGET_RETURN_IN_MEMORY. Scalars and small structures
+ that fit in two registers are returned in a0/a1. */
+
+static bool
+riscv_return_in_memory (const_tree type, const_tree fndecl ATTRIBUTE_UNUSED)
+{
+ return !IN_RANGE (int_size_in_bytes (type), 0, 2 * UNITS_PER_WORD);
+}
+
+/* Implement TARGET_PASS_BY_REFERENCE. */
+
+static bool
+riscv_pass_by_reference (cumulative_args_t cum ATTRIBUTE_UNUSED,
+ enum machine_mode mode, const_tree type,
+ bool named ATTRIBUTE_UNUSED)
+{
+ if (type && riscv_return_in_memory (type, NULL_TREE))
+ return true;
+ return targetm.calls.must_pass_in_stack (mode, type);
+}
+
+/* Implement TARGET_SETUP_INCOMING_VARARGS. */
+
+static void
+riscv_setup_incoming_varargs (cumulative_args_t cum, enum machine_mode mode,
+ tree type, int *pretend_size ATTRIBUTE_UNUSED,
+ int no_rtl)
+{
+ CUMULATIVE_ARGS local_cum;
+ int gp_saved;
+
+ /* The caller has advanced CUM up to, but not beyond, the last named
+ argument. Advance a local copy of CUM past the last "real" named
+ argument, to find out how many registers are left over. */
+ local_cum = *get_cumulative_args (cum);
+ riscv_function_arg_advance (pack_cumulative_args (&local_cum), mode, type, 1);
+
+ /* Found out how many registers we need to save. */
+ gp_saved = MAX_ARGS_IN_REGISTERS - local_cum.num_gprs;
+
+ if (!no_rtl && gp_saved > 0)
+ {
+ rtx ptr, mem;
+
+ ptr = plus_constant (Pmode, virtual_incoming_args_rtx,
+ REG_PARM_STACK_SPACE (cfun->decl)
+ - gp_saved * UNITS_PER_WORD);
+ mem = gen_frame_mem (BLKmode, ptr);
+ set_mem_alias_set (mem, get_varargs_alias_set ());
+
+ move_block_from_reg (local_cum.num_gprs + GP_ARG_FIRST,
+ mem, gp_saved);
+ }
+ if (REG_PARM_STACK_SPACE (cfun->decl) == 0)
+ cfun->machine->varargs_size = gp_saved * UNITS_PER_WORD;
+}
+
+/* Implement TARGET_EXPAND_BUILTIN_VA_START. */
+
+static void
+riscv_va_start (tree valist, rtx nextarg)
+{
+ nextarg = plus_constant (Pmode, nextarg, -cfun->machine->varargs_size);
+ std_expand_builtin_va_start (valist, nextarg);
+}
+
+/* Expand a call of type TYPE. RESULT is where the result will go (null
+ for "call"s and "sibcall"s), ADDR is the address of the function,
+ ARGS_SIZE is the size of the arguments and AUX is the value passed
+ to us by riscv_function_arg. Return the call itself. */
+
+rtx
+riscv_expand_call (bool sibcall_p, rtx result, rtx addr, rtx args_size)
+{
+ rtx pattern;
+
+ if (!call_insn_operand (addr, VOIDmode))
+ {
+ rtx reg = RISCV_EPILOGUE_TEMP (Pmode);
+ riscv_emit_move (reg, addr);
+ addr = reg;
+ }
+
+ if (result == 0)
+ {
+ rtx (*fn) (rtx, rtx);
+
+ if (sibcall_p)
+ fn = gen_sibcall_internal;
+ else
+ fn = gen_call_internal;
+
+ pattern = fn (addr, args_size);
+ }
+ else if (GET_CODE (result) == PARALLEL && XVECLEN (result, 0) == 2)
+ {
+ /* Handle return values created by riscv_return_fpr_pair. */
+ rtx (*fn) (rtx, rtx, rtx, rtx);
+ rtx reg1, reg2;
+
+ if (sibcall_p)
+ fn = gen_sibcall_value_multiple_internal;
+ else
+ fn = gen_call_value_multiple_internal;
+
+ reg1 = XEXP (XVECEXP (result, 0, 0), 0);
+ reg2 = XEXP (XVECEXP (result, 0, 1), 0);
+ pattern = fn (reg1, addr, args_size, reg2);
+ }
+ else
+ {
+ rtx (*fn) (rtx, rtx, rtx);
+
+ if (sibcall_p)
+ fn = gen_sibcall_value_internal;
+ else
+ fn = gen_call_value_internal;
+
+ /* Handle return values created by riscv_return_fpr_single. */
+ if (GET_CODE (result) == PARALLEL && XVECLEN (result, 0) == 1)
+ result = XEXP (XVECEXP (result, 0, 0), 0);
+ pattern = fn (result, addr, args_size);
+ }
+
+ return emit_call_insn (pattern);
+}
+
+/* Emit straight-line code to move LENGTH bytes from SRC to DEST.
+ Assume that the areas do not overlap. */
+
+static void
+riscv_block_move_straight (rtx dest, rtx src, HOST_WIDE_INT length)
+{
+ HOST_WIDE_INT offset, delta;
+ unsigned HOST_WIDE_INT bits;
+ int i;
+ enum machine_mode mode;
+ rtx *regs;
+
+ bits = MAX( BITS_PER_UNIT,
+ MIN( BITS_PER_WORD, MIN( MEM_ALIGN(src),MEM_ALIGN(dest) ) ) );
+
+ mode = mode_for_size (bits, MODE_INT, 0);
+ delta = bits / BITS_PER_UNIT;
+
+ /* Allocate a buffer for the temporary registers. */
+ regs = XALLOCAVEC (rtx, length / delta);
+
+ /* Load as many BITS-sized chunks as possible. Use a normal load if
+ the source has enough alignment, otherwise use left/right pairs. */
+ for (offset = 0, i = 0; offset + delta <= length; offset += delta, i++)
+ {
+ regs[i] = gen_reg_rtx (mode);
+ riscv_emit_move (regs[i], adjust_address (src, mode, offset));
+ }
+
+ /* Copy the chunks to the destination. */
+ for (offset = 0, i = 0; offset + delta <= length; offset += delta, i++)
+ riscv_emit_move (adjust_address (dest, mode, offset), regs[i]);
+
+ /* Mop up any left-over bytes. */
+ if (offset < length)
+ {
+ src = adjust_address (src, BLKmode, offset);
+ dest = adjust_address (dest, BLKmode, offset);
+ move_by_pieces (dest, src, length - offset,
+ MIN (MEM_ALIGN (src), MEM_ALIGN (dest)), 0);
+ }
+}
+
+/* Helper function for doing a loop-based block operation on memory
+ reference MEM. Each iteration of the loop will operate on LENGTH
+ bytes of MEM.
+
+ Create a new base register for use within the loop and point it to
+ the start of MEM. Create a new memory reference that uses this
+ register. Store them in *LOOP_REG and *LOOP_MEM respectively. */
+
+static void
+riscv_adjust_block_mem (rtx mem, HOST_WIDE_INT length,
+ rtx *loop_reg, rtx *loop_mem)
+{
+ *loop_reg = copy_addr_to_reg (XEXP (mem, 0));
+
+ /* Although the new mem does not refer to a known location,
+ it does keep up to LENGTH bytes of alignment. */
+ *loop_mem = change_address (mem, BLKmode, *loop_reg);
+ set_mem_align (*loop_mem, MIN (MEM_ALIGN (mem), length * BITS_PER_UNIT));
+}
+
+/* Move LENGTH bytes from SRC to DEST using a loop that moves BYTES_PER_ITER
+ bytes at a time. LENGTH must be at least BYTES_PER_ITER. Assume that
+ the memory regions do not overlap. */
+
+static void
+riscv_block_move_loop (rtx dest, rtx src, HOST_WIDE_INT length,
+ HOST_WIDE_INT bytes_per_iter)
+{
+ rtx label, src_reg, dest_reg, final_src, test;
+ HOST_WIDE_INT leftover;
+
+ leftover = length % bytes_per_iter;
+ length -= leftover;
+
+ /* Create registers and memory references for use within the loop. */
+ riscv_adjust_block_mem (src, bytes_per_iter, &src_reg, &src);
+ riscv_adjust_block_mem (dest, bytes_per_iter, &dest_reg, &dest);
+
+ /* Calculate the value that SRC_REG should have after the last iteration
+ of the loop. */
+ final_src = expand_simple_binop (Pmode, PLUS, src_reg, GEN_INT (length),
+ 0, 0, OPTAB_WIDEN);
+
+ /* Emit the start of the loop. */
+ label = gen_label_rtx ();
+ emit_label (label);
+
+ /* Emit the loop body. */
+ riscv_block_move_straight (dest, src, bytes_per_iter);
+
+ /* Move on to the next block. */
+ riscv_emit_move (src_reg, plus_constant (Pmode, src_reg, bytes_per_iter));
+ riscv_emit_move (dest_reg, plus_constant (Pmode, dest_reg, bytes_per_iter));
+
+ /* Emit the loop condition. */
+ test = gen_rtx_NE (VOIDmode, src_reg, final_src);
+ if (Pmode == DImode)
+ emit_jump_insn (gen_cbranchdi4 (test, src_reg, final_src, label));
+ else
+ emit_jump_insn (gen_cbranchsi4 (test, src_reg, final_src, label));
+
+ /* Mop up any left-over bytes. */
+ if (leftover)
+ riscv_block_move_straight (dest, src, leftover);
+}
+
+/* Expand a movmemsi instruction, which copies LENGTH bytes from
+ memory reference SRC to memory reference DEST. */
+
+bool
+riscv_expand_block_move (rtx dest, rtx src, rtx length)
+{
+ if (CONST_INT_P (length))
+ {
+ HOST_WIDE_INT factor, align;
+
+ align = MIN (MIN (MEM_ALIGN (src), MEM_ALIGN (dest)), BITS_PER_WORD);
+ factor = BITS_PER_WORD / align;
+
+ if (INTVAL (length) <= RISCV_MAX_MOVE_BYTES_STRAIGHT / factor)
+ {
+ riscv_block_move_straight (dest, src, INTVAL (length));
+ return true;
+ }
+ else if (optimize && align >= BITS_PER_WORD)
+ {
+ riscv_block_move_loop (dest, src, INTVAL (length),
+ RISCV_MAX_MOVE_BYTES_PER_LOOP_ITER / factor);
+ return true;
+ }
+ }
+ return false;
+}
+
+/* (Re-)Initialize riscv_lo_relocs and riscv_hi_relocs. */
+
+static void
+riscv_init_relocs (void)
+{
+ memset (riscv_hi_relocs, '\0', sizeof (riscv_hi_relocs));
+ memset (riscv_lo_relocs, '\0', sizeof (riscv_lo_relocs));
+
+ if (!flag_pic && riscv_cmodel == CM_MEDLOW)
+ {
+ riscv_hi_relocs[SYMBOL_ABSOLUTE] = "%hi(";
+ riscv_lo_relocs[SYMBOL_ABSOLUTE] = "%lo(";
+ }
+
+ if (!flag_pic || flag_pie)
+ {
+ riscv_hi_relocs[SYMBOL_TLS_LE] = "%tprel_hi(";
+ riscv_lo_relocs[SYMBOL_TLS_LE] = "%tprel_lo(";
+ }
+}
+
+/* Print symbolic operand OP, which is part of a HIGH or LO_SUM
+ in context CONTEXT. RELOCS is the array of relocations to use. */
+
+static void
+riscv_print_operand_reloc (FILE *file, rtx op, const char **relocs)
+{
+ enum riscv_symbol_type symbol_type;
+ const char *p;
+
+ symbol_type = riscv_classify_symbolic_expression (op);
+ gcc_assert (relocs[symbol_type]);
+
+ fputs (relocs[symbol_type], file);
+ output_addr_const (file, riscv_strip_unspec_address (op));
+ for (p = relocs[symbol_type]; *p != 0; p++)
+ if (*p == '(')
+ fputc (')', file);
+}
+
+static const char *
+riscv_memory_model_suffix (enum memmodel model)
+{
+ switch (model)
+ {
+ case MEMMODEL_ACQ_REL:
+ case MEMMODEL_SEQ_CST:
+ return ".sc";
+ case MEMMODEL_ACQUIRE:
+ case MEMMODEL_CONSUME:
+ return ".aq";
+ case MEMMODEL_RELEASE:
+ return ".rl";
+ case MEMMODEL_RELAXED:
+ return "";
+ default: gcc_unreachable();
+ }
+}
+
+/* Implement TARGET_PRINT_OPERAND. The RISCV-specific operand codes are:
+
+ 'h' Print the high-part relocation associated with OP, after stripping
+ any outermost HIGH.
+ 'R' Print the low-part relocation associated with OP.
+ 'C' Print the integer branch condition for comparison OP.
+ 'A' Print the atomic operation suffix for memory model OP.
+ 'z' Print $0 if OP is zero, otherwise print OP normally. */
+
+static void
+riscv_print_operand (FILE *file, rtx op, int letter)
+{
+ enum rtx_code code;
+
+ gcc_assert (op);
+ code = GET_CODE (op);
+
+ switch (letter)
+ {
+ case 'h':
+ if (code == HIGH)
+ op = XEXP (op, 0);
+ riscv_print_operand_reloc (file, op, riscv_hi_relocs);
+ break;
+
+ case 'R':
+ riscv_print_operand_reloc (file, op, riscv_lo_relocs);
+ break;
+
+ case 'C':
+ /* The RTL names match the instruction names. */
+ fputs (GET_RTX_NAME (code), file);
+ break;
+
+ case 'A':
+ fputs (riscv_memory_model_suffix ((enum memmodel)INTVAL (op)), file);
+ break;
+
+ default:
+ switch (code)
+ {
+ case REG:
+ if (letter && letter != 'z')
+ output_operand_lossage ("invalid use of '%%%c'", letter);
+ fprintf (file, "%s", reg_names[REGNO (op)]);
+ break;
+
+ case MEM:
+ if (letter == 'y')
+ fprintf (file, "%s", reg_names[REGNO(XEXP(op, 0))]);
+ else if (letter && letter != 'z')
+ output_operand_lossage ("invalid use of '%%%c'", letter);
+ else
+ output_address (XEXP (op, 0));
+ break;
+
+ default:
+ if (letter == 'z' && op == CONST0_RTX (GET_MODE (op)))
+ fputs (reg_names[GP_REG_FIRST], file);
+ else if (letter && letter != 'z')
+ output_operand_lossage ("invalid use of '%%%c'", letter);
+ else
+ output_addr_const (file, riscv_strip_unspec_address (op));
+ break;
+ }
+ }
+}
+
+/* Implement TARGET_PRINT_OPERAND_ADDRESS. */
+
+static void
+riscv_print_operand_address (FILE *file, rtx x)
+{
+ struct riscv_address_info addr;
+
+ if (riscv_classify_address (&addr, x, word_mode, true))
+ switch (addr.type)
+ {
+ case ADDRESS_REG:
+ riscv_print_operand (file, addr.offset, 0);
+ fprintf (file, "(%s)", reg_names[REGNO (addr.reg)]);
+ return;
+
+ case ADDRESS_LO_SUM:
+ riscv_print_operand_reloc (file, addr.offset, riscv_lo_relocs);
+ fprintf (file, "(%s)", reg_names[REGNO (addr.reg)]);
+ return;
+
+ case ADDRESS_CONST_INT:
+ output_addr_const (file, x);
+ fprintf (file, "(%s)", reg_names[GP_REG_FIRST]);
+ return;
+
+ case ADDRESS_SYMBOLIC:
+ output_addr_const (file, riscv_strip_unspec_address (x));
+ return;
+ }
+ gcc_unreachable ();
+}
+
+static bool
+riscv_size_ok_for_small_data_p (int size)
+{
+ return g_switch_value && IN_RANGE (size, 1, g_switch_value);
+}
+
+/* Return true if EXP should be placed in the small data section. */
+
+static bool
+riscv_in_small_data_p (const_tree x)
+{
+ if (TREE_CODE (x) == STRING_CST || TREE_CODE (x) == FUNCTION_DECL)
+ return false;
+
+ if (TREE_CODE (x) == VAR_DECL && DECL_SECTION_NAME (x))
+ {
+ const char *sec = DECL_SECTION_NAME (x);
+ return strcmp (sec, ".sdata") == 0 || strcmp (sec, ".sbss") == 0;
+ }
+
+ return riscv_size_ok_for_small_data_p (int_size_in_bytes (TREE_TYPE (x)));
+}
+
+/* Return a section for X, handling small data. */
+
+static section *
+riscv_elf_select_rtx_section (enum machine_mode mode, rtx x,
+ unsigned HOST_WIDE_INT align)
+{
+ section *s = default_elf_select_rtx_section (mode, x, align);
+
+ if (riscv_size_ok_for_small_data_p (GET_MODE_SIZE (mode)))
+ {
+ if (strncmp (s->named.name, ".rodata.cst", strlen (".rodata.cst")) == 0)
+ {
+ /* Rename .rodata.cst* to .srodata.cst*. */
+ char name[32];
+ sprintf (name, ".s%s", s->named.name + 1);
+ return get_section (name, s->named.common.flags, NULL);
+ }
+
+ if (s == data_section)
+ return sdata_section;
+ }
+
+ return s;
+}
+
+/* Implement TARGET_ASM_OUTPUT_DWARF_DTPREL. */
+
+static void ATTRIBUTE_UNUSED
+riscv_output_dwarf_dtprel (FILE *file, int size, rtx x)
+{
+ switch (size)
+ {
+ case 4:
+ fputs ("\t.dtprelword\t", file);
+ break;
+
+ case 8:
+ fputs ("\t.dtpreldword\t", file);
+ break;
+
+ default:
+ gcc_unreachable ();
+ }
+ output_addr_const (file, x);
+ fputs ("+0x800", file);
+}
+
+/* Make the last instruction frame-related and note that it performs
+ the operation described by FRAME_PATTERN. */
+
+static void
+riscv_set_frame_expr (rtx frame_pattern)
+{
+ rtx insn;
+
+ insn = get_last_insn ();
+ RTX_FRAME_RELATED_P (insn) = 1;
+ REG_NOTES (insn) = alloc_EXPR_LIST (REG_FRAME_RELATED_EXPR,
+ frame_pattern,
+ REG_NOTES (insn));
+}
+
+/* Return a frame-related rtx that stores REG at MEM.
+ REG must be a single register. */
+
+static rtx
+riscv_frame_set (rtx mem, rtx reg)
+{
+ rtx set;
+
+ set = gen_rtx_SET (VOIDmode, mem, reg);
+ RTX_FRAME_RELATED_P (set) = 1;
+
+ return set;
+}
+
+/* Return true if the current function must save register REGNO. */
+
+static bool
+riscv_save_reg_p (unsigned int regno)
+{
+ bool call_saved = !global_regs[regno] && !call_really_used_regs[regno];
+ bool might_clobber = crtl->saves_all_registers
+ || df_regs_ever_live_p (regno)
+ || (regno == HARD_FRAME_POINTER_REGNUM
+ && frame_pointer_needed);
+
+ return (call_saved && might_clobber)
+ || (regno == RETURN_ADDR_REGNUM && crtl->calls_eh_return);
+}
+
+/* Determine whether to call GPR save/restore routines. */
+static bool
+riscv_use_save_libcall (const struct riscv_frame_info *frame)
+{
+ if (!TARGET_SAVE_RESTORE || crtl->calls_eh_return || frame_pointer_needed)
+ return false;
+
+ return frame->save_libcall_adjustment != 0;
+}
+
+/* Determine which GPR save/restore routine to call. */
+
+static unsigned
+riscv_save_libcall_count (unsigned mask)
+{
+ for (unsigned n = GP_REG_LAST; n > GP_REG_FIRST; n--)
+ if (BITSET_P (mask, n))
+ return CALLEE_SAVED_REG_NUMBER (n) + 1;
+ abort ();
+}
+
+/* Populate the current function's riscv_frame_info structure.
+
+ RISC-V stack frames grown downward. High addresses are at the top.
+
+ +-------------------------------+
+ | |
+ | incoming stack arguments |
+ | |
+ +-------------------------------+ <-- incoming stack pointer
+ | |
+ | callee-allocated save area |
+ | for arguments that are |
+ | split between registers and |
+ | the stack |
+ | |
+ +-------------------------------+ <-- arg_pointer_rtx
+ | |
+ | callee-allocated save area |
+ | for register varargs |
+ | |
+ +-------------------------------+ <-- hard_frame_pointer_rtx;
+ | | stack_pointer_rtx + gp_sp_offset
+ | GPR save area | + UNITS_PER_WORD
+ | |
+ +-------------------------------+ <-- stack_pointer_rtx + fp_sp_offset
+ | | + UNITS_PER_HWVALUE
+ | FPR save area |
+ | |
+ +-------------------------------+ <-- frame_pointer_rtx (virtual)
+ | |
+ | local variables |
+ | |
+ P +-------------------------------+
+ | |
+ | outgoing stack arguments |
+ | |
+ +-------------------------------+ <-- stack_pointer_rtx
+
+ Dynamic stack allocations such as alloca insert data at point P.
+ They decrease stack_pointer_rtx but leave frame_pointer_rtx and
+ hard_frame_pointer_rtx unchanged. */
+
+static void
+riscv_compute_frame_info (void)
+{
+ struct riscv_frame_info *frame;
+ HOST_WIDE_INT offset;
+ unsigned int regno, i, num_x_saved = 0, num_f_saved = 0;
+
+ frame = &cfun->machine->frame;
+ memset (frame, 0, sizeof (*frame));
+
+ /* Find out which GPRs we need to save. */
+ for (regno = GP_REG_FIRST; regno <= GP_REG_LAST; regno++)
+ if (riscv_save_reg_p (regno))
+ frame->mask |= 1 << (regno - GP_REG_FIRST), num_x_saved++;
+
+ /* If this function calls eh_return, we must also save and restore the
+ EH data registers. */
+ if (crtl->calls_eh_return)
+ for (i = 0; (regno = EH_RETURN_DATA_REGNO (i)) != INVALID_REGNUM; i++)
+ frame->mask |= 1 << (regno - GP_REG_FIRST), num_x_saved++;
+
+ /* Find out which FPRs we need to save. This loop must iterate over
+ the same space as its companion in riscv_for_each_saved_gpr_and_fpr. */
+ if (TARGET_HARD_FLOAT)
+ for (regno = FP_REG_FIRST; regno <= FP_REG_LAST; regno++)
+ if (riscv_save_reg_p (regno))
+ frame->fmask |= 1 << (regno - FP_REG_FIRST), num_f_saved++;
+
+ /* At the bottom of the frame are any outgoing stack arguments. */
+ offset = crtl->outgoing_args_size;
+ /* Next are local stack variables. */
+ offset += RISCV_STACK_ALIGN (get_frame_size ());
+ /* The virtual frame pointer points above the local variables. */
+ frame->frame_pointer_offset = offset;
+ /* Next are the callee-saved FPRs. */
+ if (frame->fmask)
+ {
+ offset += RISCV_STACK_ALIGN (num_f_saved * UNITS_PER_FPREG);
+ frame->fp_sp_offset = offset - UNITS_PER_HWFPVALUE;
+ }
+ /* Next are the callee-saved GPRs. */
+ if (frame->mask)
+ {
+ unsigned x_save_size = RISCV_STACK_ALIGN (num_x_saved * UNITS_PER_WORD);
+ unsigned num_save_restore = 1 + riscv_save_libcall_count (frame->mask);
+
+ /* Only use save/restore routines if they don't alter the stack size. */
+ if (RISCV_STACK_ALIGN (num_save_restore * UNITS_PER_WORD) == x_save_size)
+ frame->save_libcall_adjustment = x_save_size;
+
+ offset += x_save_size;
+ frame->gp_sp_offset = offset - UNITS_PER_WORD;
+ }
+ /* The hard frame pointer points above the callee-saved GPRs. */
+ frame->hard_frame_pointer_offset = offset;
+ /* Above the hard frame pointer is the callee-allocated varags save area. */
+ offset += RISCV_STACK_ALIGN (cfun->machine->varargs_size);
+ frame->arg_pointer_offset = offset;
+ /* Next is the callee-allocated area for pretend stack arguments. */
+ offset += crtl->args.pretend_args_size;
+ frame->total_size = offset;
+ /* Next points the incoming stack pointer and any incoming arguments. */
+
+ /* Only use save/restore routines when the GPRs are atop the frame. */
+ if (frame->hard_frame_pointer_offset != frame->total_size)
+ frame->save_libcall_adjustment = 0;
+}
+
+/* Make sure that we're not trying to eliminate to the wrong hard frame
+ pointer. */
+
+static bool
+riscv_can_eliminate (const int from ATTRIBUTE_UNUSED, const int to)
+{
+ return (to == HARD_FRAME_POINTER_REGNUM || to == STACK_POINTER_REGNUM);
+}
+
+/* Implement INITIAL_ELIMINATION_OFFSET. FROM is either the frame pointer
+ or argument pointer. TO is either the stack pointer or hard frame
+ pointer. */
+
+HOST_WIDE_INT
+riscv_initial_elimination_offset (int from, int to)
+{
+ HOST_WIDE_INT src, dest;
+
+ riscv_compute_frame_info ();
+
+ if (to == HARD_FRAME_POINTER_REGNUM)
+ dest = cfun->machine->frame.hard_frame_pointer_offset;
+ else if (to == STACK_POINTER_REGNUM)
+ dest = 0; /* this is the base of all offsets */
+ else
+ gcc_unreachable ();
+
+ if (from == FRAME_POINTER_REGNUM)
+ src = cfun->machine->frame.frame_pointer_offset;
+ else if (from == ARG_POINTER_REGNUM)
+ src = cfun->machine->frame.arg_pointer_offset;
+ else
+ gcc_unreachable ();
+
+ return src - dest;
+}
+
+/* Implement RETURN_ADDR_RTX. We do not support moving back to a
+ previous frame. */
+
+rtx
+riscv_return_addr (int count, rtx frame ATTRIBUTE_UNUSED)
+{
+ if (count != 0)
+ return const0_rtx;
+
+ return get_hard_reg_initial_val (Pmode, RETURN_ADDR_REGNUM);
+}
+
+/* Emit code to change the current function's return address to
+ ADDRESS. SCRATCH is available as a scratch register, if needed.
+ ADDRESS and SCRATCH are both word-mode GPRs. */
+
+void
+riscv_set_return_address (rtx address, rtx scratch)
+{
+ rtx slot_address;
+
+ gcc_assert (BITSET_P (cfun->machine->frame.mask, RETURN_ADDR_REGNUM));
+ slot_address = riscv_add_offset (scratch, stack_pointer_rtx,
+ cfun->machine->frame.gp_sp_offset);
+ riscv_emit_move (gen_frame_mem (GET_MODE (address), slot_address), address);
+}
+
+/* A function to save or store a register. The first argument is the
+ register and the second is the stack slot. */
+typedef void (*riscv_save_restore_fn) (rtx, rtx);
+
+/* Use FN to save or restore register REGNO. MODE is the register's
+ mode and OFFSET is the offset of its save slot from the current
+ stack pointer. */
+
+static void
+riscv_save_restore_reg (enum machine_mode mode, int regno,
+ HOST_WIDE_INT offset, riscv_save_restore_fn fn)
+{
+ rtx mem;
+
+ mem = gen_frame_mem (mode, plus_constant (Pmode, stack_pointer_rtx, offset));
+ fn (gen_rtx_REG (mode, regno), mem);
+}
+
+/* Call FN for each register that is saved by the current function.
+ SP_OFFSET is the offset of the current stack pointer from the start
+ of the frame. */
+
+static void
+riscv_for_each_saved_gpr_and_fpr (HOST_WIDE_INT sp_offset,
+ riscv_save_restore_fn fn)
+{
+ HOST_WIDE_INT offset;
+ int regno;
+
+ /* Save the link register and s-registers. */
+ offset = cfun->machine->frame.gp_sp_offset - sp_offset;
+ for (regno = GP_REG_FIRST; regno <= GP_REG_LAST-1; regno++)
+ if (BITSET_P (cfun->machine->frame.mask, regno - GP_REG_FIRST))
+ {
+ riscv_save_restore_reg (word_mode, regno, offset, fn);
+ offset -= UNITS_PER_WORD;
+ }
+
+ /* This loop must iterate over the same space as its companion in
+ riscv_compute_frame_info. */
+ offset = cfun->machine->frame.fp_sp_offset - sp_offset;
+ for (regno = FP_REG_FIRST; regno <= FP_REG_LAST; regno++)
+ if (BITSET_P (cfun->machine->frame.fmask, regno - FP_REG_FIRST))
+ {
+ riscv_save_restore_reg (DFmode, regno, offset, fn);
+ offset -= GET_MODE_SIZE (DFmode);
+ }
+}
+
+/* Emit a move from SRC to DEST, given that one of them is a register
+ save slot and that the other is a register. TEMP is a temporary
+ GPR of the same mode that is available if need be. */
+
+static void
+riscv_emit_save_slot_move (rtx dest, rtx src, rtx temp)
+{
+ unsigned int regno;
+ rtx mem;
+ enum reg_class rclass;
+
+ if (REG_P (src))
+ {
+ regno = REGNO (src);
+ mem = dest;
+ }
+ else
+ {
+ regno = REGNO (dest);
+ mem = src;
+ }
+
+ rclass = riscv_secondary_reload_class (REGNO_REG_CLASS (regno),
+ GET_MODE (mem), mem, mem == src);
+
+ if (rclass == NO_REGS)
+ riscv_emit_move (dest, src);
+ else
+ {
+ gcc_assert (!reg_overlap_mentioned_p (dest, temp));
+ riscv_emit_move (temp, src);
+ riscv_emit_move (dest, temp);
+ }
+ if (MEM_P (dest))
+ riscv_set_frame_expr (riscv_frame_set (dest, src));
+}
+
+/* Save register REG to MEM. Make the instruction frame-related. */
+
+static void
+riscv_save_reg (rtx reg, rtx mem)
+{
+ riscv_emit_save_slot_move (mem, reg, RISCV_PROLOGUE_TEMP (GET_MODE (reg)));
+}
+
+/* Return the code to invoke the GPR save routine. */
+
+const char *
+riscv_output_gpr_save (unsigned mask)
+{
+ static char buf[GP_REG_NUM * 32];
+ size_t len = 0;
+ unsigned n = riscv_save_libcall_count (mask), i;
+ unsigned frame_size = RISCV_STACK_ALIGN ((n + 1) * UNITS_PER_WORD);
+
+ len += sprintf (buf + len, "call\tt0,__riscv_save_%u", n);
+
+#ifdef DWARF2_UNWIND_INFO
+ /* Describe the effect of the call to __riscv_save_X. */
+ if (dwarf2out_do_cfi_asm ())
+ {
+ len += sprintf (buf + len, "\n\t.cfi_def_cfa_offset %u", frame_size);
+
+ for (i = GP_REG_FIRST; i <= GP_REG_LAST; i++)
+ if (BITSET_P (cfun->machine->frame.mask, i))
+ len += sprintf (buf + len, "\n\t.cfi_offset %u,%d", i,
+ (CALLEE_SAVED_REG_NUMBER (i) + 2) * -UNITS_PER_WORD);
+ }
+#endif
+
+ return buf;
+}
+
+/* Expand the "prologue" pattern. */
+
+void
+riscv_expand_prologue (void)
+{
+ struct riscv_frame_info *frame = &cfun->machine->frame;
+ HOST_WIDE_INT size = frame->total_size;
+ unsigned mask = frame->mask;
+ rtx insn;
+
+ if (flag_stack_usage_info)
+ current_function_static_stack_size = size;
+
+ /* When optimizing for size, call a subroutine to save the registers. */
+ if (riscv_use_save_libcall (frame))
+ {
+ frame->mask = 0; /* Temporarily fib that we need not save GPRs. */
+ size -= frame->save_libcall_adjustment;
+ emit_insn (gen_gpr_save (GEN_INT (mask)));
+ }
+
+ /* Save the registers. Allocate up to RISCV_MAX_FIRST_STACK_STEP
+ bytes beforehand; this is enough to cover the register save area
+ without going out of range. */
+ if ((frame->mask | frame->fmask) != 0)
+ {
+ HOST_WIDE_INT step1;
+
+ step1 = MIN (size, RISCV_MAX_FIRST_STACK_STEP);
+ insn = gen_add3_insn (stack_pointer_rtx,
+ stack_pointer_rtx,
+ GEN_INT (-step1));
+ RTX_FRAME_RELATED_P (emit_insn (insn)) = 1;
+ size -= step1;
+ riscv_for_each_saved_gpr_and_fpr (size, riscv_save_reg);
+ }
+
+ frame->mask = mask; /* Undo the above fib. */
+
+ /* Set up the frame pointer, if we're using one. */
+ if (frame_pointer_needed)
+ {
+ insn = gen_add3_insn (hard_frame_pointer_rtx, stack_pointer_rtx,
+ GEN_INT (frame->hard_frame_pointer_offset - size));
+ RTX_FRAME_RELATED_P (emit_insn (insn)) = 1;
+ }
+
+ /* Allocate the rest of the frame. */
+ if (size > 0)
+ {
+ if (SMALL_OPERAND (-size))
+ emit_insn (gen_add3_insn (stack_pointer_rtx, stack_pointer_rtx,
+ GEN_INT (-size)));
+ else
+ {
+ riscv_emit_move (RISCV_PROLOGUE_TEMP (Pmode), GEN_INT (-size));
+ emit_insn (gen_add3_insn (stack_pointer_rtx,
+ stack_pointer_rtx,
+ RISCV_PROLOGUE_TEMP (Pmode)));
+ }
+ }
+
+ if (frame->total_size > 0)
+ {
+ /* Describe the effect of the instructions that adjusted sp. */
+ insn = plus_constant (Pmode, stack_pointer_rtx, -frame->total_size);
+ insn = gen_rtx_SET (VOIDmode, stack_pointer_rtx, insn);
+ riscv_set_frame_expr (insn);
+ }
+}
+
+/* Emit instructions to restore register REG from slot MEM. */
+
+static void
+riscv_restore_reg (rtx reg, rtx mem)
+{
+ riscv_emit_save_slot_move (reg, mem, RISCV_EPILOGUE_TEMP (GET_MODE (reg)));
+}
+
+/* Expand an "epilogue" or "sibcall_epilogue" pattern; SIBCALL_P
+ says which. */
+
+void
+riscv_expand_epilogue (bool sibcall_p)
+{
+ /* Split the frame into two. STEP1 is the amount of stack we should
+ deallocate before restoring the registers. STEP2 is the amount we
+ should deallocate afterwards.
+
+ Start off by assuming that no registers need to be restored. */
+ struct riscv_frame_info *frame = &cfun->machine->frame;
+ unsigned mask = frame->mask;
+ HOST_WIDE_INT step1 = frame->total_size;
+ HOST_WIDE_INT step2 = 0;
+ bool use_restore_libcall = !sibcall_p && riscv_use_save_libcall (frame);
+ rtx ra = gen_rtx_REG (Pmode, RETURN_ADDR_REGNUM);
+
+ if (!sibcall_p && riscv_can_use_return_insn ())
+ {
+ emit_jump_insn (gen_return ());
+ return;
+ }
+
+ /* Move past any dynamic stack allocations. */
+ if (cfun->calls_alloca)
+ {
+ rtx adjust = GEN_INT (-frame->hard_frame_pointer_offset);
+ if (!SMALL_INT (adjust))
+ {
+ riscv_emit_move (RISCV_EPILOGUE_TEMP (Pmode), adjust);
+ adjust = RISCV_EPILOGUE_TEMP (Pmode);
+ }
+
+ emit_insn (gen_add3_insn (stack_pointer_rtx, hard_frame_pointer_rtx, adjust));
+ }
+
+ /* If we need to restore registers, deallocate as much stack as
+ possible in the second step without going out of range. */
+ if ((frame->mask | frame->fmask) != 0)
+ {
+ step2 = MIN (step1, RISCV_MAX_FIRST_STACK_STEP);
+ step1 -= step2;
+ }
+
+ /* Set TARGET to BASE + STEP1. */
+ if (step1 > 0)
+ {
+ /* Get an rtx for STEP1 that we can add to BASE. */
+ rtx adjust = GEN_INT (step1);
+ if (!SMALL_OPERAND (step1))
+ {
+ riscv_emit_move (RISCV_EPILOGUE_TEMP (Pmode), adjust);
+ adjust = RISCV_EPILOGUE_TEMP (Pmode);
+ }
+
+ emit_insn (gen_add3_insn (stack_pointer_rtx, stack_pointer_rtx, adjust));
+ }
+
+ if (use_restore_libcall)
+ frame->mask = 0; /* Temporarily fib that we need not save GPRs. */
+
+ /* Restore the registers. */
+ riscv_for_each_saved_gpr_and_fpr (frame->total_size - step2,
+ riscv_restore_reg);
+
+ if (use_restore_libcall)
+ {
+ frame->mask = mask; /* Undo the above fib. */
+ gcc_assert (step2 >= frame->save_libcall_adjustment);
+ step2 -= frame->save_libcall_adjustment;
+ }
+
+ /* Deallocate the final bit of the frame. */
+ if (step2 > 0)
+ emit_insn (gen_add3_insn (stack_pointer_rtx, stack_pointer_rtx,
+ GEN_INT (step2)));
+
+ if (use_restore_libcall)
+ {
+ emit_insn (gen_gpr_restore (GEN_INT (riscv_save_libcall_count (mask))));
+ emit_jump_insn (gen_gpr_restore_return (ra));
+ return;
+ }
+
+ /* Add in the __builtin_eh_return stack adjustment. */
+ if (crtl->calls_eh_return)
+ emit_insn (gen_add3_insn (stack_pointer_rtx, stack_pointer_rtx,
+ EH_RETURN_STACKADJ_RTX));
+
+ if (!sibcall_p)
+ emit_jump_insn (gen_simple_return_internal (ra));
+}
+
+/* Return nonzero if this function is known to have a null epilogue.
+ This allows the optimizer to omit jumps to jumps if no stack
+ was created. */
+
+bool
+riscv_can_use_return_insn (void)
+{
+ return reload_completed && cfun->machine->frame.total_size == 0;
+}
+
+/* Return true if register REGNO can store a value of mode MODE.
+ The result of this function is cached in riscv_hard_regno_mode_ok. */
+
+static bool
+riscv_hard_regno_mode_ok_p (unsigned int regno, enum machine_mode mode)
+{
+ unsigned int size = GET_MODE_SIZE (mode);
+ enum mode_class mclass = GET_MODE_CLASS (mode);
+
+ /* This is hella bogus but ira_build segfaults on RV32 without it. */
+ if (VECTOR_MODE_P (mode))
+ return true;
+
+ if (GP_REG_P (regno))
+ {
+ if (size <= UNITS_PER_WORD)
+ return true;
+
+ /* Double-word values must be even-register-aligned. */
+ if (size <= 2 * UNITS_PER_WORD)
+ return regno % 2 == 0;
+ }
+
+ if (FP_REG_P (regno))
+ {
+ if (mclass == MODE_FLOAT
+ || mclass == MODE_COMPLEX_FLOAT
+ || mclass == MODE_VECTOR_FLOAT)
+ return size <= UNITS_PER_FPVALUE;
+ }
+
+ return false;
+}
+
+/* Implement HARD_REGNO_NREGS. */
+
+unsigned int
+riscv_hard_regno_nregs (int regno, enum machine_mode mode)
+{
+ if (FP_REG_P (regno))
+ return (GET_MODE_SIZE (mode) + UNITS_PER_FPREG - 1) / UNITS_PER_FPREG;
+
+ /* All other registers are word-sized. */
+ return (GET_MODE_SIZE (mode) + UNITS_PER_WORD - 1) / UNITS_PER_WORD;
+}
+
+/* Implement CLASS_MAX_NREGS, taking the maximum of the cases
+ in riscv_hard_regno_nregs. */
+
+int
+riscv_class_max_nregs (enum reg_class rclass, enum machine_mode mode)
+{
+ int size;
+ HARD_REG_SET left;
+
+ size = 0x8000;
+ COPY_HARD_REG_SET (left, reg_class_contents[(int) rclass]);
+ if (hard_reg_set_intersect_p (left, reg_class_contents[(int) FP_REGS]))
+ {
+ size = MIN (size, UNITS_PER_FPREG);
+ AND_COMPL_HARD_REG_SET (left, reg_class_contents[(int) FP_REGS]);
+ }
+ if (!hard_reg_set_empty_p (left))
+ size = MIN (size, UNITS_PER_WORD);
+ return (GET_MODE_SIZE (mode) + size - 1) / size;
+}
+
+/* Implement TARGET_PREFERRED_RELOAD_CLASS. */
+
+static reg_class_t
+riscv_preferred_reload_class (rtx x ATTRIBUTE_UNUSED, reg_class_t rclass)
+{
+ return reg_class_subset_p (FP_REGS, rclass) ? FP_REGS :
+ reg_class_subset_p (GR_REGS, rclass) ? GR_REGS :
+ rclass;
+}
+
+/* RCLASS is a class involved in a REGISTER_MOVE_COST calculation.
+ Return a "canonical" class to represent it in later calculations. */
+
+static reg_class_t
+riscv_canonicalize_move_class (reg_class_t rclass)
+{
+ if (reg_class_subset_p (rclass, GENERAL_REGS))
+ rclass = GENERAL_REGS;
+
+ return rclass;
+}
+
+/* Implement TARGET_REGISTER_MOVE_COST. Return 0 for classes that are the
+ maximum of the move costs for subclasses; regclass will work out
+ the maximum for us. */
+
+static int
+riscv_register_move_cost (enum machine_mode mode ATTRIBUTE_UNUSED,
+ reg_class_t from, reg_class_t to)
+{
+ from = riscv_canonicalize_move_class (from);
+ to = riscv_canonicalize_move_class (to);
+
+ if ((from == GENERAL_REGS && to == GENERAL_REGS)
+ || (from == GENERAL_REGS && to == FP_REGS)
+ || (from == FP_REGS && to == FP_REGS))
+ return COSTS_N_INSNS (1);
+
+ if (from == FP_REGS && to == GENERAL_REGS)
+ return tune_info->fp_to_int_cost;
+
+ return 0;
+}
+
+/* Implement TARGET_MEMORY_MOVE_COST. */
+
+static int
+riscv_memory_move_cost (enum machine_mode mode, reg_class_t rclass, bool in)
+{
+ return (tune_info->memory_cost
+ + memory_move_secondary_cost (mode, rclass, in));
+}
+
+/* Return the register class required for a secondary register when
+ copying between one of the registers in RCLASS and value X, which
+ has mode MODE. X is the source of the move if IN_P, otherwise it
+ is the destination. Return NO_REGS if no secondary register is
+ needed. */
+
+enum reg_class
+riscv_secondary_reload_class (enum reg_class rclass,
+ enum machine_mode mode, rtx x,
+ bool in_p ATTRIBUTE_UNUSED)
+{
+ int regno;
+
+ regno = true_regnum (x);
+
+ if (reg_class_subset_p (rclass, FP_REGS))
+ {
+ if (MEM_P (x) && (GET_MODE_SIZE (mode) == 4 || GET_MODE_SIZE (mode) == 8))
+ /* We can use flw/fld/fsw/fsd. */
+ return NO_REGS;
+
+ if (GP_REG_P (regno) || x == CONST0_RTX (mode))
+ /* We can use fmv or go through memory when mode > Pmode. */
+ return NO_REGS;
+
+ if (CONSTANT_P (x) && !targetm.cannot_force_const_mem (mode, x))
+ /* We can force the constant to memory and use flw/fld. */
+ return NO_REGS;
+
+ if (FP_REG_P (regno))
+ /* We can use fmv.fmt. */
+ return NO_REGS;
+
+ /* Otherwise, we need to reload through an integer register. */
+ return GR_REGS;
+ }
+ if (FP_REG_P (regno))
+ return reg_class_subset_p (rclass, GR_REGS) ? NO_REGS : GR_REGS;
+
+ return NO_REGS;
+}
+
+/* Implement TARGET_MODE_REP_EXTENDED. */
+
+static int
+riscv_mode_rep_extended (enum machine_mode mode, enum machine_mode mode_rep)
+{
+ /* On 64-bit targets, SImode register values are sign-extended to DImode. */
+ if (TARGET_64BIT && mode == SImode && mode_rep == DImode)
+ return SIGN_EXTEND;
+
+ return UNKNOWN;
+}
+
+/* Implement TARGET_SCALAR_MODE_SUPPORTED_P. */
+
+static bool
+riscv_scalar_mode_supported_p (enum machine_mode mode)
+{
+ if (ALL_FIXED_POINT_MODE_P (mode)
+ && GET_MODE_PRECISION (mode) <= 2 * BITS_PER_WORD)
+ return true;
+
+ return default_scalar_mode_supported_p (mode);
+}
+
+/* Implement TARGET_SCHED_ADJUST_COST. We assume that anti and output
+ dependencies have no cost. */
+
+static int
+riscv_adjust_cost (rtx_insn *insn ATTRIBUTE_UNUSED, rtx link,
+ rtx_insn *dep ATTRIBUTE_UNUSED, int cost)
+{
+ if (REG_NOTE_KIND (link) != 0)
+ return 0;
+ return cost;
+}
+
+/* Return the number of instructions that can be issued per cycle. */
+
+static int
+riscv_issue_rate (void)
+{
+ return tune_info->issue_rate;
+}
+
+/* This structure describes a single built-in function. */
+struct riscv_builtin_description {
+ /* The code of the main .md file instruction. See riscv_builtin_type
+ for more information. */
+ enum insn_code icode;
+
+ /* The name of the built-in function. */
+ const char *name;
+
+ /* Specifies how the function should be expanded. */
+ enum riscv_builtin_type builtin_type;
+
+ /* The function's prototype. */
+ enum riscv_function_type function_type;
+
+ /* Whether the function is available. */
+ unsigned int (*avail) (void);
+};
+
+static unsigned int
+riscv_builtin_avail_riscv (void)
+{
+ return 1;
+}
+
+/* Construct a riscv_builtin_description from the given arguments.
+
+ INSN is the name of the associated instruction pattern, without the
+ leading CODE_FOR_riscv_.
+
+ CODE is the floating-point condition code associated with the
+ function. It can be 'f' if the field is not applicable.
+
+ NAME is the name of the function itself, without the leading
+ "__builtin_riscv_".
+
+ BUILTIN_TYPE and FUNCTION_TYPE are riscv_builtin_description fields.
+
+ AVAIL is the name of the availability predicate, without the leading
+ riscv_builtin_avail_. */
+#define RISCV_BUILTIN(INSN, NAME, BUILTIN_TYPE, FUNCTION_TYPE, AVAIL) \
+ { CODE_FOR_ ## INSN, "__builtin_riscv_" NAME, \
+ BUILTIN_TYPE, FUNCTION_TYPE, riscv_builtin_avail_ ## AVAIL }
+
+/* Define __builtin_riscv_<INSN>, which is a RISCV_BUILTIN_DIRECT function
+ mapped to instruction CODE_FOR_<INSN>, FUNCTION_TYPE and AVAIL
+ are as for RISCV_BUILTIN. */
+#define DIRECT_BUILTIN(INSN, FUNCTION_TYPE, AVAIL) \
+ RISCV_BUILTIN (INSN, #INSN, RISCV_BUILTIN_DIRECT, FUNCTION_TYPE, AVAIL)
+
+/* Define __builtin_riscv_<INSN>, which is a RISCV_BUILTIN_DIRECT_NO_TARGET
+ function mapped to instruction CODE_FOR_<INSN>, FUNCTION_TYPE
+ and AVAIL are as for RISCV_BUILTIN. */
+#define DIRECT_NO_TARGET_BUILTIN(INSN, FUNCTION_TYPE, AVAIL) \
+ RISCV_BUILTIN (INSN, #INSN, RISCV_BUILTIN_DIRECT_NO_TARGET, \
+ FUNCTION_TYPE, AVAIL)
+
+static const struct riscv_builtin_description riscv_builtins[] = {
+ DIRECT_NO_TARGET_BUILTIN (nop, RISCV_VOID_FTYPE_VOID, riscv),
+};
+
+/* Index I is the function declaration for riscv_builtins[I], or null if the
+ function isn't defined on this target. */
+static GTY(()) tree riscv_builtin_decls[ARRAY_SIZE (riscv_builtins)];
+
+
+/* Source-level argument types. */
+#define RISCV_ATYPE_VOID void_type_node
+#define RISCV_ATYPE_INT integer_type_node
+#define RISCV_ATYPE_POINTER ptr_type_node
+#define RISCV_ATYPE_CPOINTER const_ptr_type_node
+
+/* Standard mode-based argument types. */
+#define RISCV_ATYPE_UQI unsigned_intQI_type_node
+#define RISCV_ATYPE_SI intSI_type_node
+#define RISCV_ATYPE_USI unsigned_intSI_type_node
+#define RISCV_ATYPE_DI intDI_type_node
+#define RISCV_ATYPE_UDI unsigned_intDI_type_node
+#define RISCV_ATYPE_SF float_type_node
+#define RISCV_ATYPE_DF double_type_node
+
+/* RISCV_FTYPE_ATYPESN takes N RISCV_FTYPES-like type codes and lists
+ their associated RISCV_ATYPEs. */
+#define RISCV_FTYPE_ATYPES1(A, B) \
+ RISCV_ATYPE_##A, RISCV_ATYPE_##B
+
+#define RISCV_FTYPE_ATYPES2(A, B, C) \
+ RISCV_ATYPE_##A, RISCV_ATYPE_##B, RISCV_ATYPE_##C
+
+#define RISCV_FTYPE_ATYPES3(A, B, C, D) \
+ RISCV_ATYPE_##A, RISCV_ATYPE_##B, RISCV_ATYPE_##C, RISCV_ATYPE_##D
+
+#define RISCV_FTYPE_ATYPES4(A, B, C, D, E) \
+ RISCV_ATYPE_##A, RISCV_ATYPE_##B, RISCV_ATYPE_##C, RISCV_ATYPE_##D, \
+ RISCV_ATYPE_##E
+
+/* Return the function type associated with function prototype TYPE. */
+
+static tree
+riscv_build_function_type (enum riscv_function_type type)
+{
+ static tree types[(int) RISCV_MAX_FTYPE_MAX];
+
+ if (types[(int) type] == NULL_TREE)
+ switch (type)
+ {
+#define DEF_RISCV_FTYPE(NUM, ARGS) \
+ case RISCV_FTYPE_NAME##NUM ARGS: \
+ types[(int) type] \
+ = build_function_type_list (RISCV_FTYPE_ATYPES##NUM ARGS, \
+ NULL_TREE); \
+ break;
+#include "config/riscv/riscv-ftypes.def"
+#undef DEF_RISCV_FTYPE
+ default:
+ gcc_unreachable ();
+ }
+
+ return types[(int) type];
+}
+
+/* Implement TARGET_INIT_BUILTINS. */
+
+static void
+riscv_init_builtins (void)
+{
+ const struct riscv_builtin_description *d;
+ unsigned int i;
+
+ /* Iterate through all of the bdesc arrays, initializing all of the
+ builtin functions. */
+ for (i = 0; i < ARRAY_SIZE (riscv_builtins); i++)
+ {
+ d = &riscv_builtins[i];
+ if (d->avail ())
+ riscv_builtin_decls[i]
+ = add_builtin_function (d->name,
+ riscv_build_function_type (d->function_type),
+ i, BUILT_IN_MD, NULL, NULL);
+ }
+}
+
+/* Implement TARGET_BUILTIN_DECL. */
+
+static tree
+riscv_builtin_decl (unsigned int code, bool initialize_p ATTRIBUTE_UNUSED)
+{
+ if (code >= ARRAY_SIZE (riscv_builtins))
+ return error_mark_node;
+ return riscv_builtin_decls[code];
+}
+
+/* Take argument ARGNO from EXP's argument list and convert it into a
+ form suitable for input operand OPNO of instruction ICODE. Return the
+ value. */
+
+static rtx
+riscv_prepare_builtin_arg (enum insn_code icode,
+ unsigned int opno, tree exp, unsigned int argno)
+{
+ tree arg;
+ rtx value;
+ enum machine_mode mode;
+
+ arg = CALL_EXPR_ARG (exp, argno);
+ value = expand_normal (arg);
+ mode = insn_data[icode].operand[opno].mode;
+ if (!insn_data[icode].operand[opno].predicate (value, mode))
+ {
+ /* We need to get the mode from ARG for two reasons:
+
+ - to cope with address operands, where MODE is the mode of the
+ memory, rather than of VALUE itself.
+
+ - to cope with special predicates like pmode_register_operand,
+ where MODE is VOIDmode. */
+ value = copy_to_mode_reg (TYPE_MODE (TREE_TYPE (arg)), value);
+
+ /* Check the predicate again. */
+ if (!insn_data[icode].operand[opno].predicate (value, mode))
+ {
+ error ("invalid argument to built-in function");
+ return const0_rtx;
+ }
+ }
+
+ return value;
+}
+
+/* Return an rtx suitable for output operand OP of instruction ICODE.
+ If TARGET is non-null, try to use it where possible. */
+
+static rtx
+riscv_prepare_builtin_target (enum insn_code icode, unsigned int op, rtx target)
+{
+ enum machine_mode mode;
+
+ mode = insn_data[icode].operand[op].mode;
+ if (target == 0 || !insn_data[icode].operand[op].predicate (target, mode))
+ target = gen_reg_rtx (mode);
+
+ return target;
+}
+
+/* Expand a RISCV_BUILTIN_DIRECT or RISCV_BUILTIN_DIRECT_NO_TARGET function;
+ HAS_TARGET_P says which. EXP is the CALL_EXPR that calls the function
+ and ICODE is the code of the associated .md pattern. TARGET, if nonnull,
+ suggests a good place to put the result. */
+
+static rtx
+riscv_expand_builtin_direct (enum insn_code icode, rtx target, tree exp,
+ bool has_target_p)
+{
+ rtx ops[MAX_RECOG_OPERANDS];
+ int opno, argno;
+
+ /* Map any target to operand 0. */
+ opno = 0;
+ if (has_target_p)
+ {
+ target = riscv_prepare_builtin_target (icode, opno, target);
+ ops[opno] = target;
+ opno++;
+ }
+
+ /* Map the arguments to the other operands. The n_operands value
+ for an expander includes match_dups and match_scratches as well as
+ match_operands, so n_operands is only an upper bound on the number
+ of arguments to the expander function. */
+ gcc_assert (opno + call_expr_nargs (exp) <= insn_data[icode].n_operands);
+ for (argno = 0; argno < call_expr_nargs (exp); argno++, opno++)
+ ops[opno] = riscv_prepare_builtin_arg (icode, opno, exp, argno);
+
+ switch (opno)
+ {
+ case 2:
+ emit_insn (GEN_FCN (icode) (ops[0], ops[1]));
+ break;
+
+ case 3:
+ emit_insn (GEN_FCN (icode) (ops[0], ops[1], ops[2]));
+ break;
+
+ case 4:
+ emit_insn (GEN_FCN (icode) (ops[0], ops[1], ops[2], ops[3]));
+ break;
+
+ default:
+ gcc_unreachable ();
+ }
+ return target;
+}
+
+/* Implement TARGET_EXPAND_BUILTIN. */
+
+static rtx
+riscv_expand_builtin (tree exp, rtx target, rtx subtarget ATTRIBUTE_UNUSED,
+ enum machine_mode mode ATTRIBUTE_UNUSED,
+ int ignore ATTRIBUTE_UNUSED)
+{
+ tree fndecl;
+ unsigned int fcode, avail;
+ const struct riscv_builtin_description *d;
+
+ fndecl = TREE_OPERAND (CALL_EXPR_FN (exp), 0);
+ fcode = DECL_FUNCTION_CODE (fndecl);
+ gcc_assert (fcode < ARRAY_SIZE (riscv_builtins));
+ d = &riscv_builtins[fcode];
+ avail = d->avail ();
+ gcc_assert (avail != 0);
+ switch (d->builtin_type)
+ {
+ case RISCV_BUILTIN_DIRECT:
+ return riscv_expand_builtin_direct (d->icode, target, exp, true);
+
+ case RISCV_BUILTIN_DIRECT_NO_TARGET:
+ return riscv_expand_builtin_direct (d->icode, target, exp, false);
+ }
+ gcc_unreachable ();
+}
+
+/* Implement TARGET_ASM_OUTPUT_MI_THUNK. Generate rtl rather than asm text
+ in order to avoid duplicating too much logic from elsewhere. */
+
+static void
+riscv_output_mi_thunk (FILE *file, tree thunk_fndecl ATTRIBUTE_UNUSED,
+ HOST_WIDE_INT delta, HOST_WIDE_INT vcall_offset,
+ tree function)
+{
+ rtx this_rtx, temp1, temp2, fnaddr;
+ rtx_insn *insn;
+ bool use_sibcall_p;
+
+ /* Pretend to be a post-reload pass while generating rtl. */
+ reload_completed = 1;
+
+ /* Mark the end of the (empty) prologue. */
+ emit_note (NOTE_INSN_PROLOGUE_END);
+
+ /* Determine if we can use a sibcall to call FUNCTION directly. */
+ fnaddr = XEXP (DECL_RTL (function), 0);
+ use_sibcall_p = absolute_symbolic_operand (fnaddr, Pmode);
+
+ /* We need two temporary registers in some cases. */
+ temp1 = gen_rtx_REG (Pmode, GP_TEMP_FIRST);
+ temp2 = gen_rtx_REG (Pmode, GP_TEMP_FIRST + 1);
+
+ /* Find out which register contains the "this" pointer. */
+ if (aggregate_value_p (TREE_TYPE (TREE_TYPE (function)), function))
+ this_rtx = gen_rtx_REG (Pmode, GP_ARG_FIRST + 1);
+ else
+ this_rtx = gen_rtx_REG (Pmode, GP_ARG_FIRST);
+
+ /* Add DELTA to THIS_RTX. */
+ if (delta != 0)
+ {
+ rtx offset = GEN_INT (delta);
+ if (!SMALL_OPERAND (delta))
+ {
+ riscv_emit_move (temp1, offset);
+ offset = temp1;
+ }
+ emit_insn (gen_add3_insn (this_rtx, this_rtx, offset));
+ }
+
+ /* If needed, add *(*THIS_RTX + VCALL_OFFSET) to THIS_RTX. */
+ if (vcall_offset != 0)
+ {
+ rtx addr;
+
+ /* Set TEMP1 to *THIS_RTX. */
+ riscv_emit_move (temp1, gen_rtx_MEM (Pmode, this_rtx));
+
+ /* Set ADDR to a legitimate address for *THIS_RTX + VCALL_OFFSET. */
+ addr = riscv_add_offset (temp2, temp1, vcall_offset);
+
+ /* Load the offset and add it to THIS_RTX. */
+ riscv_emit_move (temp1, gen_rtx_MEM (Pmode, addr));
+ emit_insn (gen_add3_insn (this_rtx, this_rtx, temp1));
+ }
+
+ /* Jump to the target function. Use a sibcall if direct jumps are
+ allowed, otherwise load the address into a register first. */
+ if (use_sibcall_p)
+ {
+ insn = emit_call_insn (gen_sibcall_internal (fnaddr, const0_rtx));
+ SIBLING_CALL_P (insn) = 1;
+ }
+ else
+ {
+ riscv_emit_move(temp1, fnaddr);
+ emit_jump_insn (gen_indirect_jump (temp1));
+ }
+
+ /* Run just enough of rest_of_compilation. This sequence was
+ "borrowed" from alpha.c. */
+ insn = get_insns ();
+ split_all_insns_noflow ();
+ shorten_branches (insn);
+ final_start_function (insn, file, 1);
+ final (insn, file, 1);
+ final_end_function ();
+
+ /* Clean up the vars set above. Note that final_end_function resets
+ the global pointer for us. */
+ reload_completed = 0;
+}
+
+/* Allocate a chunk of memory for per-function machine-dependent data. */
+
+static struct machine_function *
+riscv_init_machine_status (void)
+{
+ return ggc_cleared_alloc<machine_function> ();
+}
+
+/* Implement TARGET_OPTION_OVERRIDE. */
+
+static void
+riscv_option_override (void)
+{
+ int regno, mode;
+ const struct riscv_cpu_info *cpu;
+
+#ifdef SUBTARGET_OVERRIDE_OPTIONS
+ SUBTARGET_OVERRIDE_OPTIONS;
+#endif
+
+ flag_pcc_struct_return = 0;
+
+ if (flag_pic)
+ g_switch_value = 0;
+
+ /* Prefer a call to memcpy over inline code when optimizing for size,
+ though see MOVE_RATIO in riscv.h. */
+ if (optimize_size && (target_flags_explicit & MASK_MEMCPY) == 0)
+ target_flags |= MASK_MEMCPY;
+
+ /* Handle -mtune. */
+ cpu = riscv_parse_cpu (riscv_tune_string ? riscv_tune_string :
+ RISCV_TUNE_STRING_DEFAULT);
+ tune_info = optimize_size ? &optimize_size_tune_info : cpu->tune_info;
+
+ /* If the user hasn't specified a branch cost, use the processor's
+ default. */
+ if (riscv_branch_cost == 0)
+ riscv_branch_cost = tune_info->branch_cost;
+
+ /* Set up riscv_hard_regno_mode_ok. */
+ for (mode = 0; mode < MAX_MACHINE_MODE; mode++)
+ for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++)
+ riscv_hard_regno_mode_ok[mode][regno]
+ = riscv_hard_regno_mode_ok_p (regno, (enum machine_mode) mode);
+
+ /* Function to allocate machine-dependent function status. */
+ init_machine_status = &riscv_init_machine_status;
+
+ if (riscv_cmodel_string)
+ {
+ if (strcmp (riscv_cmodel_string, "medlow") == 0)
+ riscv_cmodel = CM_MEDLOW;
+ else if (strcmp (riscv_cmodel_string, "medany") == 0)
+ riscv_cmodel = CM_MEDANY;
+ else
+ error ("unsupported code model: %s", riscv_cmodel_string);
+ }
+
+ if (flag_pic)
+ riscv_cmodel = CM_PIC;
+
+ riscv_init_relocs ();
+}
+
+/* Implement TARGET_CONDITIONAL_REGISTER_USAGE. */
+
+static void
+riscv_conditional_register_usage (void)
+{
+ int regno;
+
+ if (!TARGET_HARD_FLOAT)
+ {
+ for (regno = FP_REG_FIRST; regno <= FP_REG_LAST; regno++)
+ fixed_regs[regno] = call_used_regs[regno] = 1;
+ }
+}
+
+/* Implement TARGET_TRAMPOLINE_INIT. */
+
+static void
+riscv_trampoline_init (rtx m_tramp, tree fndecl, rtx chain_value)
+{
+ rtx addr, end_addr, mem;
+ rtx trampoline[4];
+ unsigned int i;
+ HOST_WIDE_INT static_chain_offset, target_function_offset;
+
+ /* Work out the offsets of the pointers from the start of the
+ trampoline code. */
+ gcc_assert (ARRAY_SIZE (trampoline) * 4 == TRAMPOLINE_CODE_SIZE);
+ static_chain_offset = TRAMPOLINE_CODE_SIZE;
+ target_function_offset = static_chain_offset + GET_MODE_SIZE (ptr_mode);
+
+ /* Get pointers to the beginning and end of the code block. */
+ addr = force_reg (Pmode, XEXP (m_tramp, 0));
+ end_addr = riscv_force_binary (Pmode, PLUS, addr, GEN_INT (TRAMPOLINE_CODE_SIZE));
+
+#define OP(X) gen_int_mode (X, SImode)
+#define MATCH_LREG ((Pmode) == DImode ? MATCH_LD : MATCH_LW)
+
+ /* auipc t0, 0
+ l[wd] t1, target_function_offset(t0)
+ l[wd] $static_chain, static_chain_offset(t0)
+ jr t1
+ */
+
+ trampoline[0] = OP (RISCV_UTYPE (AUIPC, STATIC_CHAIN_REGNUM, 0));
+ trampoline[1] = OP (RISCV_ITYPE (LREG, RISCV_PROLOGUE_TEMP_REGNUM,
+ STATIC_CHAIN_REGNUM, target_function_offset));
+ trampoline[2] = OP (RISCV_ITYPE (LREG, STATIC_CHAIN_REGNUM,
+ STATIC_CHAIN_REGNUM, static_chain_offset));
+ trampoline[3] = OP (RISCV_ITYPE (JALR, 0, RISCV_PROLOGUE_TEMP_REGNUM, 0));
+
+#undef MATCH_LREG
+#undef OP
+
+ /* Copy the trampoline code. Leave any padding uninitialized. */
+ for (i = 0; i < ARRAY_SIZE (trampoline); i++)
+ {
+ mem = adjust_address (m_tramp, SImode, i * GET_MODE_SIZE (SImode));
+ riscv_emit_move (mem, trampoline[i]);
+ }
+
+ /* Set up the static chain pointer field. */
+ mem = adjust_address (m_tramp, ptr_mode, static_chain_offset);
+ riscv_emit_move (mem, chain_value);
+
+ /* Set up the target function field. */
+ mem = adjust_address (m_tramp, ptr_mode, target_function_offset);
+ riscv_emit_move (mem, XEXP (DECL_RTL (fndecl), 0));
+
+ /* Flush the code part of the trampoline. */
+ emit_insn (gen_add3_insn (end_addr, addr, GEN_INT (TRAMPOLINE_SIZE)));
+ emit_insn (gen_clear_cache (addr, end_addr));
+}
+
+/* Implement TARGET_FUNCTION_OK_FOR_SIBCALL. */
+
+static bool
+riscv_function_ok_for_sibcall (tree decl, tree exp ATTRIBUTE_UNUSED)
+{
+ if (TARGET_SAVE_RESTORE)
+ {
+ /* When optimzing for size, don't use sibcalls in non-leaf routines */
+ if (cfun->machine->is_leaf == 0)
+ cfun->machine->is_leaf = leaf_function_p () ? 1 : -1;
+
+ return cfun->machine->is_leaf > 0;
+ }
+
+ return true;
+}
+
+static bool
+riscv_lra_p (void)
+{
+ return riscv_lra_flag;
+}
+
+/* Initialize the GCC target structure. */
+#undef TARGET_ASM_ALIGNED_HI_OP
+#define TARGET_ASM_ALIGNED_HI_OP "\t.half\t"
+#undef TARGET_ASM_ALIGNED_SI_OP
+#define TARGET_ASM_ALIGNED_SI_OP "\t.word\t"
+#undef TARGET_ASM_ALIGNED_DI_OP
+#define TARGET_ASM_ALIGNED_DI_OP "\t.dword\t"
+
+#undef TARGET_OPTION_OVERRIDE
+#define TARGET_OPTION_OVERRIDE riscv_option_override
+
+#undef TARGET_LEGITIMIZE_ADDRESS
+#define TARGET_LEGITIMIZE_ADDRESS riscv_legitimize_address
+
+#undef TARGET_SCHED_ADJUST_COST
+#define TARGET_SCHED_ADJUST_COST riscv_adjust_cost
+#undef TARGET_SCHED_ISSUE_RATE
+#define TARGET_SCHED_ISSUE_RATE riscv_issue_rate
+
+#undef TARGET_FUNCTION_OK_FOR_SIBCALL
+#define TARGET_FUNCTION_OK_FOR_SIBCALL riscv_function_ok_for_sibcall
+
+#undef TARGET_REGISTER_MOVE_COST
+#define TARGET_REGISTER_MOVE_COST riscv_register_move_cost
+#undef TARGET_MEMORY_MOVE_COST
+#define TARGET_MEMORY_MOVE_COST riscv_memory_move_cost
+#undef TARGET_RTX_COSTS
+#define TARGET_RTX_COSTS riscv_rtx_costs
+#undef TARGET_ADDRESS_COST
+#define TARGET_ADDRESS_COST riscv_address_cost
+
+#undef TARGET_PREFERRED_RELOAD_CLASS
+#define TARGET_PREFERRED_RELOAD_CLASS riscv_preferred_reload_class
+
+#undef TARGET_ASM_FILE_START_FILE_DIRECTIVE
+#define TARGET_ASM_FILE_START_FILE_DIRECTIVE true
+
+#undef TARGET_EXPAND_BUILTIN_VA_START
+#define TARGET_EXPAND_BUILTIN_VA_START riscv_va_start
+
+#undef TARGET_PROMOTE_FUNCTION_MODE
+#define TARGET_PROMOTE_FUNCTION_MODE default_promote_function_mode_always_promote
+
+#undef TARGET_RETURN_IN_MEMORY
+#define TARGET_RETURN_IN_MEMORY riscv_return_in_memory
+
+#undef TARGET_ASM_OUTPUT_MI_THUNK
+#define TARGET_ASM_OUTPUT_MI_THUNK riscv_output_mi_thunk
+#undef TARGET_ASM_CAN_OUTPUT_MI_THUNK
+#define TARGET_ASM_CAN_OUTPUT_MI_THUNK hook_bool_const_tree_hwi_hwi_const_tree_true
+
+#undef TARGET_PRINT_OPERAND
+#define TARGET_PRINT_OPERAND riscv_print_operand
+#undef TARGET_PRINT_OPERAND_ADDRESS
+#define TARGET_PRINT_OPERAND_ADDRESS riscv_print_operand_address
+
+#undef TARGET_SETUP_INCOMING_VARARGS
+#define TARGET_SETUP_INCOMING_VARARGS riscv_setup_incoming_varargs
+#undef TARGET_STRICT_ARGUMENT_NAMING
+#define TARGET_STRICT_ARGUMENT_NAMING hook_bool_CUMULATIVE_ARGS_true
+#undef TARGET_MUST_PASS_IN_STACK
+#define TARGET_MUST_PASS_IN_STACK must_pass_in_stack_var_size
+#undef TARGET_PASS_BY_REFERENCE
+#define TARGET_PASS_BY_REFERENCE riscv_pass_by_reference
+#undef TARGET_ARG_PARTIAL_BYTES
+#define TARGET_ARG_PARTIAL_BYTES riscv_arg_partial_bytes
+#undef TARGET_FUNCTION_ARG
+#define TARGET_FUNCTION_ARG riscv_function_arg
+#undef TARGET_FUNCTION_ARG_ADVANCE
+#define TARGET_FUNCTION_ARG_ADVANCE riscv_function_arg_advance
+#undef TARGET_FUNCTION_ARG_BOUNDARY
+#define TARGET_FUNCTION_ARG_BOUNDARY riscv_function_arg_boundary
+
+#undef TARGET_MODE_REP_EXTENDED
+#define TARGET_MODE_REP_EXTENDED riscv_mode_rep_extended
+
+#undef TARGET_SCALAR_MODE_SUPPORTED_P
+#define TARGET_SCALAR_MODE_SUPPORTED_P riscv_scalar_mode_supported_p
+
+#undef TARGET_INIT_BUILTINS
+#define TARGET_INIT_BUILTINS riscv_init_builtins
+#undef TARGET_BUILTIN_DECL
+#define TARGET_BUILTIN_DECL riscv_builtin_decl
+#undef TARGET_EXPAND_BUILTIN
+#define TARGET_EXPAND_BUILTIN riscv_expand_builtin
+
+#undef TARGET_HAVE_TLS
+#define TARGET_HAVE_TLS HAVE_AS_TLS
+
+#undef TARGET_CANNOT_FORCE_CONST_MEM
+#define TARGET_CANNOT_FORCE_CONST_MEM riscv_cannot_force_const_mem
+
+#undef TARGET_LEGITIMATE_CONSTANT_P
+#define TARGET_LEGITIMATE_CONSTANT_P riscv_legitimate_constant_p
+
+#undef TARGET_USE_BLOCKS_FOR_CONSTANT_P
+#define TARGET_USE_BLOCKS_FOR_CONSTANT_P hook_bool_mode_const_rtx_true
+
+#ifdef HAVE_AS_DTPRELWORD
+#undef TARGET_ASM_OUTPUT_DWARF_DTPREL
+#define TARGET_ASM_OUTPUT_DWARF_DTPREL riscv_output_dwarf_dtprel
+#endif
+
+#undef TARGET_LEGITIMATE_ADDRESS_P
+#define TARGET_LEGITIMATE_ADDRESS_P riscv_legitimate_address_p
+
+#undef TARGET_CAN_ELIMINATE
+#define TARGET_CAN_ELIMINATE riscv_can_eliminate
+
+#undef TARGET_CONDITIONAL_REGISTER_USAGE
+#define TARGET_CONDITIONAL_REGISTER_USAGE riscv_conditional_register_usage
+
+#undef TARGET_TRAMPOLINE_INIT
+#define TARGET_TRAMPOLINE_INIT riscv_trampoline_init
+
+#undef TARGET_IN_SMALL_DATA_P
+#define TARGET_IN_SMALL_DATA_P riscv_in_small_data_p
+
+#undef TARGET_ASM_SELECT_RTX_SECTION
+#define TARGET_ASM_SELECT_RTX_SECTION riscv_elf_select_rtx_section
+
+#undef TARGET_MIN_ANCHOR_OFFSET
+#define TARGET_MIN_ANCHOR_OFFSET (-RISCV_IMM_REACH/2)
+
+#undef TARGET_MAX_ANCHOR_OFFSET
+#define TARGET_MAX_ANCHOR_OFFSET (RISCV_IMM_REACH/2-1)
+
+#undef TARGET_LRA_P
+#define TARGET_LRA_P riscv_lra_p
+
+struct gcc_target targetm = TARGET_INITIALIZER;
+
+#include "gt-riscv.h"
diff -urN empty/gcc/config/riscv/riscv.h gcc-5.2.0/gcc/config/riscv/riscv.h
--- gcc-5.2.0/gcc/config/riscv/riscv.h 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/gcc/config/riscv/riscv.h 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1,1109 @@
+/* Definition of RISC-V target for GNU compiler.
+ Copyright (C) 2011-2014 Free Software Foundation, Inc.
+ Contributed by Andrew Waterman (waterman@cs.berkeley.edu) at UC Berkeley.
+ Based on MIPS target for GNU compiler.
+
+This file is part of GCC.
+
+GCC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 3, or (at your option)
+any later version.
+
+GCC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GCC; see the file COPYING3. If not see
+<http://www.gnu.org/licenses/>. */
+
+/* TARGET_HARD_FLOAT and TARGET_SOFT_FLOAT reflect whether the FPU is
+ directly accessible, while the command-line options select
+ TARGET_HARD_FLOAT_ABI and TARGET_SOFT_FLOAT_ABI to reflect the ABI
+ in use. */
+#define TARGET_HARD_FLOAT TARGET_HARD_FLOAT_ABI
+#define TARGET_SOFT_FLOAT TARGET_SOFT_FLOAT_ABI
+
+/* Target CPU builtins. */
+#define TARGET_CPU_CPP_BUILTINS() \
+ do \
+ { \
+ builtin_assert ("machine=riscv"); \
+ \
+ builtin_assert ("cpu=riscv"); \
+ builtin_define ("__riscv__"); \
+ builtin_define ("__riscv"); \
+ builtin_define ("_riscv"); \
+ \
+ if (TARGET_64BIT) \
+ { \
+ builtin_define ("__riscv64"); \
+ builtin_define ("_RISCV_SIM=_ABI64"); \
+ } \
+ else \
+ builtin_define ("_RISCV_SIM=_ABI32"); \
+ \
+ builtin_define ("_ABI32=1"); \
+ builtin_define ("_ABI64=3"); \
+ \
+ \
+ builtin_define_with_int_value ("_RISCV_SZINT", INT_TYPE_SIZE); \
+ builtin_define_with_int_value ("_RISCV_SZLONG", LONG_TYPE_SIZE); \
+ builtin_define_with_int_value ("_RISCV_SZPTR", POINTER_SIZE); \
+ builtin_define_with_int_value ("_RISCV_FPSET", 32); \
+ \
+ if (TARGET_ATOMIC) { \
+ builtin_define ("__riscv_atomic"); \
+ } \
+ \
+ /* These defines reflect the ABI in use, not whether the \
+ FPU is directly accessible. */ \
+ if (TARGET_HARD_FLOAT_ABI) { \
+ builtin_define ("__riscv_hard_float"); \
+ if (TARGET_FDIV) { \
+ builtin_define ("__riscv_fdiv"); \
+ builtin_define ("__riscv_fsqrt"); \
+ } \
+ } else \
+ builtin_define ("__riscv_soft_float"); \
+ \
+ /* The base RISC-V ISA is always little-endian. */ \
+ builtin_define_std ("RISCVEL"); \
+ builtin_define ("_RISCVEL"); \
+ \
+ /* Macros dependent on the C dialect. */ \
+ if (preprocessing_asm_p ()) \
+ { \
+ builtin_define_std ("LANGUAGE_ASSEMBLY"); \
+ builtin_define ("_LANGUAGE_ASSEMBLY"); \
+ } \
+ else if (c_dialect_cxx ()) \
+ { \
+ builtin_define ("_LANGUAGE_C_PLUS_PLUS"); \
+ builtin_define ("__LANGUAGE_C_PLUS_PLUS"); \
+ builtin_define ("__LANGUAGE_C_PLUS_PLUS__"); \
+ } \
+ else \
+ { \
+ builtin_define_std ("LANGUAGE_C"); \
+ builtin_define ("_LANGUAGE_C"); \
+ } \
+ if (c_dialect_objc ()) \
+ { \
+ builtin_define ("_LANGUAGE_OBJECTIVE_C"); \
+ builtin_define ("__LANGUAGE_OBJECTIVE_C"); \
+ /* Bizarre, but needed at least for Irix. */ \
+ builtin_define_std ("LANGUAGE_C"); \
+ builtin_define ("_LANGUAGE_C"); \
+ } \
+ if (riscv_cmodel == CM_MEDANY) \
+ builtin_define ("_RISCV_CMODEL_MEDANY"); \
+ } \
+ while (0)
+
+/* Default target_flags if no switches are specified */
+
+#ifndef TARGET_DEFAULT
+#define TARGET_DEFAULT 0
+#endif
+
+#ifndef RISCV_ARCH_STRING_DEFAULT
+#define RISCV_ARCH_STRING_DEFAULT "IMAFD"
+#endif
+
+#ifndef RISCV_TUNE_STRING_DEFAULT
+#define RISCV_TUNE_STRING_DEFAULT "rocket"
+#endif
+
+#ifndef TARGET_64BIT_DEFAULT
+#define TARGET_64BIT_DEFAULT 1
+#endif
+
+#if TARGET_64BIT_DEFAULT
+# define MULTILIB_ARCH_DEFAULT "m64"
+# define OPT_ARCH64 "!m32"
+# define OPT_ARCH32 "m32"
+#else
+# define MULTILIB_ARCH_DEFAULT "m32"
+# define OPT_ARCH64 "m64"
+# define OPT_ARCH32 "!m64"
+#endif
+
+#ifndef MULTILIB_DEFAULTS
+#define MULTILIB_DEFAULTS \
+ { MULTILIB_ARCH_DEFAULT }
+#endif
+
+
+/* Support for a compile-time default CPU, et cetera. The rules are:
+ --with-arch is ignored if -march is specified.
+ --with-tune is ignored if -mtune is specified.
+ --with-float is ignored if -mhard-float or -msoft-float are specified. */
+#define OPTION_DEFAULT_SPECS \
+ {"arch", "%{!march=*:-march=%(VALUE)}"}, \
+ {"arch_32", "%{" OPT_ARCH32 ":%{m32}}" }, \
+ {"arch_64", "%{" OPT_ARCH64 ":%{m64}}" }, \
+ {"tune", "%{!mtune=*:-mtune=%(VALUE)}" }, \
+ {"float", "%{!msoft-float:%{!mhard-float:-m%(VALUE)-float}}" }, \
+
+#define DRIVER_SELF_SPECS ""
+
+#ifdef IN_LIBGCC2
+#undef TARGET_64BIT
+/* Make this compile time constant for libgcc2 */
+#ifdef __riscv64
+#define TARGET_64BIT 1
+#else
+#define TARGET_64BIT 0
+#endif
+#endif /* IN_LIBGCC2 */
+
+/* Tell collect what flags to pass to nm. */
+#ifndef NM_FLAGS
+#define NM_FLAGS "-Bn"
+#endif
+
+#undef ASM_SPEC
+#define ASM_SPEC "\
+%(subtarget_asm_debugging_spec) \
+%{m32} %{m64} %{!m32:%{!m64: %(asm_abi_default_spec)}} \
+%{mrvc} \
+%{fPIC|fpic|fPIE|fpie:-fpic} \
+%{march=*} \
+%(subtarget_asm_spec)"
+
+/* Extra switches sometimes passed to the linker. */
+
+#ifndef LINK_SPEC
+#define LINK_SPEC "\
+%{!T:-dT riscv.ld} \
+%{m64:-melf64lriscv} \
+%{m32:-melf32lriscv} \
+%{shared}"
+#endif /* LINK_SPEC defined */
+
+/* This macro defines names of additional specifications to put in the specs
+ that can be used in various specifications like CC1_SPEC. Its definition
+ is an initializer with a subgrouping for each command option.
+
+ Each subgrouping contains a string constant, that defines the
+ specification name, and a string constant that used by the GCC driver
+ program.
+
+ Do not define this macro if it does not need to do anything. */
+
+#define EXTRA_SPECS \
+ { "asm_abi_default_spec", "-" MULTILIB_ARCH_DEFAULT }, \
+ SUBTARGET_EXTRA_SPECS
+
+#ifndef SUBTARGET_EXTRA_SPECS
+#define SUBTARGET_EXTRA_SPECS
+#endif
+
+#define TARGET_DEFAULT_CMODEL CM_MEDLOW
+
+/* By default, turn on GDB extensions. */
+#define DEFAULT_GDB_EXTENSIONS 1
+
+#define LOCAL_LABEL_PREFIX "."
+#define USER_LABEL_PREFIX ""
+
+#define DWARF2_DEBUGGING_INFO 1
+#define DWARF2_ASM_LINE_DEBUG_INFO 0
+
+/* The mapping from gcc register number to DWARF 2 CFA column number. */
+#define DWARF_FRAME_REGNUM(REGNO) \
+ (GP_REG_P (REGNO) || FP_REG_P (REGNO) ? REGNO : INVALID_REGNUM)
+
+/* The DWARF 2 CFA column which tracks the return address. */
+#define DWARF_FRAME_RETURN_COLUMN RETURN_ADDR_REGNUM
+
+/* Don't emit .cfi_sections, as it does not work */
+#undef HAVE_GAS_CFI_SECTIONS_DIRECTIVE
+#define HAVE_GAS_CFI_SECTIONS_DIRECTIVE 0
+
+/* Before the prologue, RA lives in r31. */
+#define INCOMING_RETURN_ADDR_RTX gen_rtx_REG (VOIDmode, RETURN_ADDR_REGNUM)
+
+/* Describe how we implement __builtin_eh_return. */
+#define EH_RETURN_DATA_REGNO(N) \
+ ((N) < 4 ? (N) + GP_ARG_FIRST : INVALID_REGNUM)
+
+#define EH_RETURN_STACKADJ_RTX gen_rtx_REG (Pmode, GP_ARG_FIRST + 4)
+
+/* Target machine storage layout */
+
+#define BITS_BIG_ENDIAN 0
+#define BYTES_BIG_ENDIAN 0
+#define WORDS_BIG_ENDIAN 0
+
+#define MAX_BITS_PER_WORD 64
+
+/* Width of a word, in units (bytes). */
+#define UNITS_PER_WORD (TARGET_64BIT ? 8 : 4)
+#ifndef IN_LIBGCC2
+#define MIN_UNITS_PER_WORD 4
+#endif
+
+/* We currently require both or neither of the `F' and `D' extensions. */
+#define UNITS_PER_FPREG 8
+
+/* If FP regs aren't wide enough for a given FP argument, it is passed in
+ integer registers. */
+#define MIN_FPRS_PER_FMT 1
+
+/* The largest size of value that can be held in floating-point
+ registers and moved with a single instruction. */
+#define UNITS_PER_HWFPVALUE \
+ (TARGET_SOFT_FLOAT_ABI ? 0 : UNITS_PER_FPREG)
+
+/* The largest size of value that can be held in floating-point
+ registers. */
+#define UNITS_PER_FPVALUE \
+ (TARGET_SOFT_FLOAT_ABI ? 0 \
+ : LONG_DOUBLE_TYPE_SIZE / BITS_PER_UNIT)
+
+/* The number of bytes in a double. */
+#define UNITS_PER_DOUBLE (TYPE_PRECISION (double_type_node) / BITS_PER_UNIT)
+
+/* Set the sizes of the core types. */
+#define SHORT_TYPE_SIZE 16
+#define INT_TYPE_SIZE 32
+#define LONG_TYPE_SIZE (TARGET_64BIT ? 64 : 32)
+#define LONG_LONG_TYPE_SIZE 64
+
+#define FLOAT_TYPE_SIZE 32
+#define DOUBLE_TYPE_SIZE 64
+/* XXX The ABI says long doubles are IEEE-754-2008 float128s. */
+#define LONG_DOUBLE_TYPE_SIZE 64
+
+#ifdef IN_LIBGCC2
+# define LIBGCC2_LONG_DOUBLE_TYPE_SIZE LONG_DOUBLE_TYPE_SIZE
+#endif
+
+/* Allocation boundary (in *bits*) for storing arguments in argument list. */
+#define PARM_BOUNDARY BITS_PER_WORD
+
+/* Allocation boundary (in *bits*) for the code of a function. */
+#define FUNCTION_BOUNDARY (TARGET_RVC ? 16 : 32)
+
+/* There is no point aligning anything to a rounder boundary than this. */
+#define BIGGEST_ALIGNMENT 128
+
+/* All accesses must be aligned. */
+#define STRICT_ALIGNMENT 1
+
+/* Define this if you wish to imitate the way many other C compilers
+ handle alignment of bitfields and the structures that contain
+ them.
+
+ The behavior is that the type written for a bit-field (`int',
+ `short', or other integer type) imposes an alignment for the
+ entire structure, as if the structure really did contain an
+ ordinary field of that type. In addition, the bit-field is placed
+ within the structure so that it would fit within such a field,
+ not crossing a boundary for it.
+
+ Thus, on most machines, a bit-field whose type is written as `int'
+ would not cross a four-byte boundary, and would force four-byte
+ alignment for the whole structure. (The alignment used may not
+ be four bytes; it is controlled by the other alignment
+ parameters.)
+
+ If the macro is defined, its definition should be a C expression;
+ a nonzero value for the expression enables this behavior. */
+
+#define PCC_BITFIELD_TYPE_MATTERS 1
+
+/* If defined, a C expression to compute the alignment given to a
+ constant that is being placed in memory. CONSTANT is the constant
+ and ALIGN is the alignment that the object would ordinarily have.
+ The value of this macro is used instead of that alignment to align
+ the object.
+
+ If this macro is not defined, then ALIGN is used.
+
+ The typical use of this macro is to increase alignment for string
+ constants to be word aligned so that `strcpy' calls that copy
+ constants can be done inline. */
+
+#define CONSTANT_ALIGNMENT(EXP, ALIGN) \
+ ((TREE_CODE (EXP) == STRING_CST || TREE_CODE (EXP) == CONSTRUCTOR) \
+ && (ALIGN) < BITS_PER_WORD ? BITS_PER_WORD : (ALIGN))
+
+/* If defined, a C expression to compute the alignment for a static
+ variable. TYPE is the data type, and ALIGN is the alignment that
+ the object would ordinarily have. The value of this macro is used
+ instead of that alignment to align the object.
+
+ If this macro is not defined, then ALIGN is used.
+
+ One use of this macro is to increase alignment of medium-size
+ data to make it all fit in fewer cache lines. Another is to
+ cause character arrays to be word-aligned so that `strcpy' calls
+ that copy constants to character arrays can be done inline. */
+
+#undef DATA_ALIGNMENT
+#define DATA_ALIGNMENT(TYPE, ALIGN) \
+ ((((ALIGN) < BITS_PER_WORD) \
+ && (TREE_CODE (TYPE) == ARRAY_TYPE \
+ || TREE_CODE (TYPE) == UNION_TYPE \
+ || TREE_CODE (TYPE) == RECORD_TYPE)) ? BITS_PER_WORD : (ALIGN))
+
+/* We need this for the same reason as DATA_ALIGNMENT, namely to cause
+ character arrays to be word-aligned so that `strcpy' calls that copy
+ constants to character arrays can be done inline, and 'strcmp' can be
+ optimised to use word loads. */
+#define LOCAL_ALIGNMENT(TYPE, ALIGN) \
+ DATA_ALIGNMENT (TYPE, ALIGN)
+
+/* Define if operations between registers always perform the operation
+ on the full register even if a narrower mode is specified. */
+#define WORD_REGISTER_OPERATIONS
+
+/* When in 64-bit mode, move insns will sign extend SImode and CCmode
+ moves. All other references are zero extended. */
+#define LOAD_EXTEND_OP(MODE) \
+ (TARGET_64BIT && ((MODE) == SImode || (MODE) == CCmode) \
+ ? SIGN_EXTEND : ZERO_EXTEND)
+
+/* Define this macro if it is advisable to hold scalars in registers
+ in a wider mode than that declared by the program. In such cases,
+ the value is constrained to be within the bounds of the declared
+ type, but kept valid in the wider mode. The signedness of the
+ extension may differ from that of the type. */
+
+#define PROMOTE_MODE(MODE, UNSIGNEDP, TYPE) \
+ if (GET_MODE_CLASS (MODE) == MODE_INT \
+ && GET_MODE_SIZE (MODE) < 4) \
+ { \
+ (MODE) = Pmode; \
+ }
+
+/* Pmode is always the same as ptr_mode, but not always the same as word_mode.
+ Extensions of pointers to word_mode must be signed. */
+#define POINTERS_EXTEND_UNSIGNED false
+
+/* RV32 double-precision FP <-> integer moves go through memory */
+#define SECONDARY_MEMORY_NEEDED(CLASS1,CLASS2,MODE) \
+ (!TARGET_64BIT && GET_MODE_SIZE (MODE) == 8 && \
+ (((CLASS1) == FP_REGS && (CLASS2) != FP_REGS) \
+ || ((CLASS2) == FP_REGS && (CLASS1) != FP_REGS)))
+
+/* Define if loading short immediate values into registers sign extends. */
+#define SHORT_IMMEDIATES_SIGN_EXTEND
+
+/* Standard register usage. */
+
+/* Number of hardware registers. We have:
+
+ - 32 integer registers
+ - 32 floating point registers
+ - 32 vector integer registers
+ - 32 vector floating point registers
+ - 2 fake registers:
+ - ARG_POINTER_REGNUM
+ - FRAME_POINTER_REGNUM */
+
+#define FIRST_PSEUDO_REGISTER 66
+
+/* x0, sp, gp, and tp are fixed. */
+
+#define FIXED_REGISTERS \
+{ /* General registers. */ \
+ 1, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
+ /* Floating-point registers. */ \
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
+ /* Others. */ \
+ 1, 1 \
+}
+
+
+/* a0-a7, t0-a6, fa0-fa7, and ft0-ft11 are volatile across calls.
+ The call RTLs themselves clobber ra. */
+
+#define CALL_USED_REGISTERS \
+{ /* General registers. */ \
+ 1, 0, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, \
+ 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, \
+ /* Floating-point registers. */ \
+ 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, \
+ 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, \
+ /* Others. */ \
+ 1, 1 \
+}
+
+#define CALL_REALLY_USED_REGISTERS \
+{ /* General registers. */ \
+ 1, 0, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, \
+ 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, \
+ /* Floating-point registers. */ \
+ 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, \
+ 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, \
+ /* Others. */ \
+ 1, 1 \
+}
+
+/* Internal macros to classify an ISA register's type. */
+
+#define GP_REG_FIRST 0
+#define GP_REG_LAST 31
+#define GP_REG_NUM (GP_REG_LAST - GP_REG_FIRST + 1)
+
+#define FP_REG_FIRST 32
+#define FP_REG_LAST 63
+#define FP_REG_NUM (FP_REG_LAST - FP_REG_FIRST + 1)
+
+/* The DWARF 2 CFA column which tracks the return address from a
+ signal handler context. This means that to maintain backwards
+ compatibility, no hard register can be assigned this column if it
+ would need to be handled by the DWARF unwinder. */
+#define DWARF_ALT_FRAME_RETURN_COLUMN 64
+
+#define GP_REG_P(REGNO) \
+ ((unsigned int) ((int) (REGNO) - GP_REG_FIRST) < GP_REG_NUM)
+#define FP_REG_P(REGNO) \
+ ((unsigned int) ((int) (REGNO) - FP_REG_FIRST) < FP_REG_NUM)
+
+#define FP_REG_RTX_P(X) (REG_P (X) && FP_REG_P (REGNO (X)))
+
+/* Return coprocessor number from register number. */
+
+#define COPNUM_AS_CHAR_FROM_REGNUM(REGNO) \
+ (COP0_REG_P (REGNO) ? '0' : COP2_REG_P (REGNO) ? '2' \
+ : COP3_REG_P (REGNO) ? '3' : '?')
+
+
+#define HARD_REGNO_NREGS(REGNO, MODE) riscv_hard_regno_nregs (REGNO, MODE)
+
+#define HARD_REGNO_MODE_OK(REGNO, MODE) \
+ riscv_hard_regno_mode_ok[ (int)(MODE) ][ (REGNO) ]
+
+#define MODES_TIEABLE_P(MODE1, MODE2) \
+ ((MODE1) == (MODE2) || (GET_MODE_CLASS (MODE1) == MODE_INT \
+ && GET_MODE_CLASS (MODE2) == MODE_INT))
+
+/* Use s0 as the frame pointer if it is so requested. */
+#define HARD_FRAME_POINTER_REGNUM 8
+#define STACK_POINTER_REGNUM 2
+#define THREAD_POINTER_REGNUM 4
+
+/* These two registers don't really exist: they get eliminated to either
+ the stack or hard frame pointer. */
+#define ARG_POINTER_REGNUM 64
+#define FRAME_POINTER_REGNUM 65
+
+#define HARD_FRAME_POINTER_IS_FRAME_POINTER 0
+#define HARD_FRAME_POINTER_IS_ARG_POINTER 0
+
+/* Register in which static-chain is passed to a function. */
+#define STATIC_CHAIN_REGNUM GP_TEMP_FIRST
+
+/* Registers used as temporaries in prologue/epilogue code.
+
+ The prologue registers mustn't conflict with any
+ incoming arguments, the static chain pointer, or the frame pointer.
+ The epilogue temporary mustn't conflict with the return registers,
+ the frame pointer, the EH stack adjustment, or the EH data registers. */
+
+#define RISCV_PROLOGUE_TEMP_REGNUM (GP_TEMP_FIRST + 1)
+#define RISCV_EPILOGUE_TEMP_REGNUM RISCV_PROLOGUE_TEMP_REGNUM
+
+#define RISCV_PROLOGUE_TEMP(MODE) gen_rtx_REG (MODE, RISCV_PROLOGUE_TEMP_REGNUM)
+#define RISCV_EPILOGUE_TEMP(MODE) gen_rtx_REG (MODE, RISCV_EPILOGUE_TEMP_REGNUM)
+
+#define FUNCTION_PROFILER(STREAM, LABELNO) \
+{ \
+ sorry ("profiler support for RISC-V"); \
+}
+
+/* Define this macro if it is as good or better to call a constant
+ function address than to call an address kept in a register. */
+#define NO_FUNCTION_CSE 1
+
+/* Define the classes of registers for register constraints in the
+ machine description. Also define ranges of constants.
+
+ One of the classes must always be named ALL_REGS and include all hard regs.
+ If there is more than one class, another class must be named NO_REGS
+ and contain no registers.
+
+ The name GENERAL_REGS must be the name of a class (or an alias for
+ another name such as ALL_REGS). This is the class of registers
+ that is allowed by "g" or "r" in a register constraint.
+ Also, registers outside this class are allocated only when
+ instructions express preferences for them.
+
+ The classes must be numbered in nondecreasing order; that is,
+ a larger-numbered class must never be contained completely
+ in a smaller-numbered class.
+
+ For any two classes, it is very desirable that there be another
+ class that represents their union. */
+
+enum reg_class
+{
+ NO_REGS, /* no registers in set */
+ T_REGS, /* registers used by indirect sibcalls */
+ GR_REGS, /* integer registers */
+ FP_REGS, /* floating point registers */
+ FRAME_REGS, /* $arg and $frame */
+ ALL_REGS, /* all registers */
+ LIM_REG_CLASSES /* max value + 1 */
+};
+
+#define N_REG_CLASSES (int) LIM_REG_CLASSES
+
+#define GENERAL_REGS GR_REGS
+
+/* An initializer containing the names of the register classes as C
+ string constants. These names are used in writing some of the
+ debugging dumps. */
+
+#define REG_CLASS_NAMES \
+{ \
+ "NO_REGS", \
+ "T_REGS", \
+ "GR_REGS", \
+ "FP_REGS", \
+ "FRAME_REGS", \
+ "ALL_REGS" \
+}
+
+/* An initializer containing the contents of the register classes,
+ as integers which are bit masks. The Nth integer specifies the
+ contents of class N. The way the integer MASK is interpreted is
+ that register R is in the class if `MASK & (1 << R)' is 1.
+
+ When the machine has more than 32 registers, an integer does not
+ suffice. Then the integers are replaced by sub-initializers,
+ braced groupings containing several integers. Each
+ sub-initializer must be suitable as an initializer for the type
+ `HARD_REG_SET' which is defined in `hard-reg-set.h'. */
+
+#define REG_CLASS_CONTENTS \
+{ \
+ { 0x00000000, 0x00000000, 0x00000000 }, /* NO_REGS */ \
+ { 0xf00000e0, 0x00000000, 0x00000000 }, /* T_REGS */ \
+ { 0xffffffff, 0x00000000, 0x00000000 }, /* GR_REGS */ \
+ { 0x00000000, 0xffffffff, 0x00000000 }, /* FP_REGS */ \
+ { 0x00000000, 0x00000000, 0x00000003 }, /* FRAME_REGS */ \
+ { 0xffffffff, 0xffffffff, 0x00000003 } /* ALL_REGS */ \
+}
+
+/* A C expression whose value is a register class containing hard
+ register REGNO. In general there is more that one such class;
+ choose a class which is "minimal", meaning that no smaller class
+ also contains the register. */
+
+#define REGNO_REG_CLASS(REGNO) riscv_regno_to_class[ (REGNO) ]
+
+/* A macro whose definition is the name of the class to which a
+ valid base register must belong. A base register is one used in
+ an address which is the register value plus a displacement. */
+
+#define BASE_REG_CLASS GR_REGS
+
+/* A macro whose definition is the name of the class to which a
+ valid index register must belong. An index register is one used
+ in an address where its value is either multiplied by a scale
+ factor or added to another register (as well as added to a
+ displacement). */
+
+#define INDEX_REG_CLASS NO_REGS
+
+/* We generally want to put call-clobbered registers ahead of
+ call-saved ones. (IRA expects this.) */
+
+#define REG_ALLOC_ORDER \
+{ \
+ /* Call-clobbered GPRs. */ \
+ 15, 14, 13, 12, 11, 10, 16, 17, 5, 6, 7, 28, 29, 30, 31, 1, \
+ /* Call-saved GPRs. */ \
+ 8, 9, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, \
+ /* GPRs that can never be exposed to the register allocator. */ \
+ 0, 2, 3, 4, \
+ /* Call-clobbered FPRs. */ \
+ 32, 33, 34, 35, 36, 37, 38, 39, 42, 43, 44, 45, 46, 47, 48, 49, \
+ 60, 61, 62, 63, \
+ /* Call-saved FPRs. */ \
+ 40, 41, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, \
+ /* None of the remaining classes have defined call-saved \
+ registers. */ \
+ 64, 65 \
+}
+
+/* True if VALUE is a signed 16-bit number. */
+
+#include "opcode-riscv.h"
+#define SMALL_OPERAND(VALUE) \
+ ((unsigned HOST_WIDE_INT) (VALUE) + RISCV_IMM_REACH/2 < RISCV_IMM_REACH)
+
+/* True if VALUE can be loaded into a register using LUI. */
+
+#define LUI_OPERAND(VALUE) \
+ (((VALUE) | ((1UL<<31) - RISCV_IMM_REACH)) == ((1UL<<31) - RISCV_IMM_REACH) \
+ || ((VALUE) | ((1UL<<31) - RISCV_IMM_REACH)) + RISCV_IMM_REACH == 0)
+
+/* Return a value X with the low 16 bits clear, and such that
+ VALUE - X is a signed 16-bit value. */
+
+#define SMALL_INT(X) SMALL_OPERAND (INTVAL (X))
+#define LUI_INT(X) LUI_OPERAND (INTVAL (X))
+
+/* The HI and LO registers can only be reloaded via the general
+ registers. Condition code registers can only be loaded to the
+ general registers, and from the floating point registers. */
+
+#define SECONDARY_INPUT_RELOAD_CLASS(CLASS, MODE, X) \
+ riscv_secondary_reload_class (CLASS, MODE, X, true)
+#define SECONDARY_OUTPUT_RELOAD_CLASS(CLASS, MODE, X) \
+ riscv_secondary_reload_class (CLASS, MODE, X, false)
+
+/* Return the maximum number of consecutive registers
+ needed to represent mode MODE in a register of class CLASS. */
+
+#define CLASS_MAX_NREGS(CLASS, MODE) riscv_class_max_nregs (CLASS, MODE)
+
+/* It is undefined to interpret an FP register in a different format than
+ that which it was created to be. */
+
+#define CANNOT_CHANGE_MODE_CLASS(FROM, TO, CLASS) \
+ reg_classes_intersect_p (FP_REGS, CLASS)
+
+/* Stack layout; function entry, exit and calling. */
+
+#define STACK_GROWS_DOWNWARD
+
+#define FRAME_GROWS_DOWNWARD 1
+
+#define STARTING_FRAME_OFFSET 0
+
+#define RETURN_ADDR_RTX riscv_return_addr
+
+#define ELIMINABLE_REGS \
+{{ ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
+ { ARG_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM}, \
+ { FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
+ { FRAME_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM}} \
+
+#define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \
+ (OFFSET) = riscv_initial_elimination_offset (FROM, TO)
+
+/* Allocate stack space for arguments at the beginning of each function. */
+#define ACCUMULATE_OUTGOING_ARGS 1
+
+/* The argument pointer always points to the first argument. */
+#define FIRST_PARM_OFFSET(FNDECL) 0
+
+#define REG_PARM_STACK_SPACE(FNDECL) 0
+
+/* Define this if it is the responsibility of the caller to
+ allocate the area reserved for arguments passed in registers.
+ If `ACCUMULATE_OUTGOING_ARGS' is also defined, the only effect
+ of this macro is to determine whether the space is included in
+ `crtl->outgoing_args_size'. */
+#define OUTGOING_REG_PARM_STACK_SPACE(FNTYPE) 1
+
+#define STACK_BOUNDARY 128
+
+/* Symbolic macros for the registers used to return integer and floating
+ point values. */
+
+#define GP_RETURN GP_ARG_FIRST
+#define FP_RETURN ((TARGET_SOFT_FLOAT) ? GP_RETURN : FP_ARG_FIRST)
+
+#define MAX_ARGS_IN_REGISTERS 8
+
+/* Symbolic macros for the first/last argument registers. */
+
+#define GP_ARG_FIRST (GP_REG_FIRST + 10)
+#define GP_ARG_LAST (GP_ARG_FIRST + MAX_ARGS_IN_REGISTERS - 1)
+#define GP_TEMP_FIRST (GP_REG_FIRST + 5)
+#define FP_ARG_FIRST (FP_REG_FIRST + 10)
+#define FP_ARG_LAST (FP_ARG_FIRST + MAX_ARGS_IN_REGISTERS - 1)
+
+#define CALLEE_SAVED_REG_NUMBER(REGNO) \
+ ((REGNO) >= 8 && (REGNO) <= 9 ? (REGNO) - 8 : \
+ (REGNO) >= 18 && (REGNO) <= 27 ? (REGNO) - 16 : -1)
+
+#define LIBCALL_VALUE(MODE) \
+ riscv_function_value (NULL_TREE, NULL_TREE, MODE)
+
+#define FUNCTION_VALUE(VALTYPE, FUNC) \
+ riscv_function_value (VALTYPE, FUNC, VOIDmode)
+
+#define FUNCTION_VALUE_REGNO_P(N) ((N) == GP_RETURN || (N) == FP_RETURN)
+
+/* 1 if N is a possible register number for function argument passing.
+ We have no FP argument registers when soft-float. When FP registers
+ are 32 bits, we can't directly reference the odd numbered ones. */
+
+/* Accept arguments in a0-a7 and/or fa0-fa7. */
+#define FUNCTION_ARG_REGNO_P(N) \
+ (IN_RANGE((N), GP_ARG_FIRST, GP_ARG_LAST) \
+ || IN_RANGE((N), FP_ARG_FIRST, FP_ARG_LAST))
+
+/* The ABI views the arguments as a structure, of which the first 8
+ words go in registers and the rest go on the stack. If I < 8, N, the Ith
+ word might go in the Ith integer argument register or the Ith
+ floating-point argument register. */
+
+typedef struct {
+ /* Number of integer registers used so far, up to MAX_ARGS_IN_REGISTERS. */
+ unsigned int num_gprs;
+
+ /* Number of words passed on the stack. */
+ unsigned int stack_words;
+} CUMULATIVE_ARGS;
+
+/* Initialize a variable CUM of type CUMULATIVE_ARGS
+ for a call to a function whose data type is FNTYPE.
+ For a library call, FNTYPE is 0. */
+
+#define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, INDIRECT, N_NAMED_ARGS) \
+ memset (&(CUM), 0, sizeof (CUM))
+
+#define EPILOGUE_USES(REGNO) ((REGNO) == RETURN_ADDR_REGNUM)
+
+/* ABI requires 16-byte alignment, even on ven on RV32. */
+#define RISCV_STACK_ALIGN(LOC) (((LOC) + 15) & -16)
+
+#define NO_PROFILE_COUNTERS 1
+
+/* Define this macro if the code for function profiling should come
+ before the function prologue. Normally, the profiling code comes
+ after. */
+
+/* #define PROFILE_BEFORE_PROLOGUE */
+
+/* EXIT_IGNORE_STACK should be nonzero if, when returning from a function,
+ the stack pointer does not matter. The value is tested only in
+ functions that have frame pointers.
+ No definition is equivalent to always zero. */
+
+#define EXIT_IGNORE_STACK 1
+
+
+/* Trampolines are a block of code followed by two pointers. */
+
+#define TRAMPOLINE_CODE_SIZE 16
+#define TRAMPOLINE_SIZE (TRAMPOLINE_CODE_SIZE + POINTER_SIZE * 2)
+#define TRAMPOLINE_ALIGNMENT POINTER_SIZE
+
+/* Addressing modes, and classification of registers for them. */
+
+#define REGNO_OK_FOR_INDEX_P(REGNO) 0
+#define REGNO_MODE_OK_FOR_BASE_P(REGNO, MODE) \
+ riscv_regno_mode_ok_for_base_p (REGNO, MODE, 1)
+
+/* The macros REG_OK_FOR..._P assume that the arg is a REG rtx
+ and check its validity for a certain class.
+ We have two alternate definitions for each of them.
+ The usual definition accepts all pseudo regs; the other rejects them all.
+ The symbol REG_OK_STRICT causes the latter definition to be used.
+
+ Most source files want to accept pseudo regs in the hope that
+ they will get allocated to the class that the insn wants them to be in.
+ Some source files that are used after register allocation
+ need to be strict. */
+
+#ifndef REG_OK_STRICT
+#define REG_MODE_OK_FOR_BASE_P(X, MODE) \
+ riscv_regno_mode_ok_for_base_p (REGNO (X), MODE, 0)
+#else
+#define REG_MODE_OK_FOR_BASE_P(X, MODE) \
+ riscv_regno_mode_ok_for_base_p (REGNO (X), MODE, 1)
+#endif
+
+#define REG_OK_FOR_INDEX_P(X) 0
+
+
+/* Maximum number of registers that can appear in a valid memory address. */
+
+#define MAX_REGS_PER_ADDRESS 1
+
+#define CONSTANT_ADDRESS_P(X) \
+ (CONSTANT_P (X) && memory_address_p (SImode, X))
+
+/* This handles the magic '..CURRENT_FUNCTION' symbol, which means
+ 'the start of the function that this code is output in'. */
+
+#define ASM_OUTPUT_LABELREF(FILE,NAME) \
+ if (strcmp (NAME, "..CURRENT_FUNCTION") == 0) \
+ asm_fprintf ((FILE), "%U%s", \
+ XSTR (XEXP (DECL_RTL (current_function_decl), 0), 0)); \
+ else \
+ asm_fprintf ((FILE), "%U%s", (NAME))
+
+/* This flag marks functions that cannot be lazily bound. */
+#define SYMBOL_FLAG_BIND_NOW (SYMBOL_FLAG_MACH_DEP << 1)
+#define SYMBOL_REF_BIND_NOW_P(RTX) \
+ ((SYMBOL_REF_FLAGS (RTX) & SYMBOL_FLAG_BIND_NOW) != 0)
+
+#define JUMP_TABLES_IN_TEXT_SECTION 0
+#define CASE_VECTOR_MODE SImode
+#define CASE_VECTOR_PC_RELATIVE (riscv_cmodel != CM_MEDLOW)
+
+/* Define this as 1 if `char' should by default be signed; else as 0. */
+#define DEFAULT_SIGNED_CHAR 0
+
+/* Consider using fld/fsd to move 8 bytes at a time for RV32IFD. */
+#define MOVE_MAX UNITS_PER_WORD
+#define MAX_MOVE_MAX 8
+
+#define SLOW_BYTE_ACCESS 0
+
+#define SHIFT_COUNT_TRUNCATED 1
+
+/* Value is 1 if truncating an integer of INPREC bits to OUTPREC bits
+ is done just by pretending it is already truncated. */
+#define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) \
+ (TARGET_64BIT ? ((INPREC) <= 32 || (OUTPREC) < 32) : 1)
+
+/* Specify the machine mode that pointers have.
+ After generation of rtl, the compiler makes no further distinction
+ between pointers and any other objects of this machine mode. */
+
+#ifndef Pmode
+#define Pmode (TARGET_64BIT ? DImode : SImode)
+#endif
+
+/* Give call MEMs SImode since it is the "most permissive" mode
+ for both 32-bit and 64-bit targets. */
+
+#define FUNCTION_MODE SImode
+
+/* A C expression for the cost of a branch instruction. A value of 2
+ seems to minimize code size. */
+
+#define BRANCH_COST(speed_p, predictable_p) \
+ ((!(speed_p) || (predictable_p)) ? 2 : riscv_branch_cost)
+
+#define LOGICAL_OP_NON_SHORT_CIRCUIT 0
+
+/* Control the assembler format that we output. */
+
+/* Output to assembler file text saying following lines
+ may contain character constants, extra white space, comments, etc. */
+
+#ifndef ASM_APP_ON
+#define ASM_APP_ON " #APP\n"
+#endif
+
+/* Output to assembler file text saying following lines
+ no longer contain unusual constructs. */
+
+#ifndef ASM_APP_OFF
+#define ASM_APP_OFF " #NO_APP\n"
+#endif
+
+#define REGISTER_NAMES \
+{ "zero","ra", "sp", "gp", "tp", "t0", "t1", "t2", \
+ "s0", "s1", "a0", "a1", "a2", "a3", "a4", "a5", \
+ "a6", "a7", "s2", "s3", "s4", "s5", "s6", "s7", \
+ "s8", "s9", "s10", "s11", "t3", "t4", "t5", "t6", \
+ "ft0", "ft1", "ft2", "ft3", "ft4", "ft5", "ft6", "ft7", \
+ "fs0", "fs1", "fa0", "fa1", "fa2", "fa3", "fa4", "fa5", \
+ "fa6", "fa7", "fs2", "fs3", "fs4", "fs5", "fs6", "fs7", \
+ "fs8", "fs9", "fs10","fs11","ft8", "ft9", "ft10","ft11", \
+ "arg", "frame", }
+
+#define ADDITIONAL_REGISTER_NAMES \
+{ \
+ { "x0", 0 + GP_REG_FIRST }, \
+ { "x1", 1 + GP_REG_FIRST }, \
+ { "x2", 2 + GP_REG_FIRST }, \
+ { "x3", 3 + GP_REG_FIRST }, \
+ { "x4", 4 + GP_REG_FIRST }, \
+ { "x5", 5 + GP_REG_FIRST }, \
+ { "x6", 6 + GP_REG_FIRST }, \
+ { "x7", 7 + GP_REG_FIRST }, \
+ { "x8", 8 + GP_REG_FIRST }, \
+ { "x9", 9 + GP_REG_FIRST }, \
+ { "x10", 10 + GP_REG_FIRST }, \
+ { "x11", 11 + GP_REG_FIRST }, \
+ { "x12", 12 + GP_REG_FIRST }, \
+ { "x13", 13 + GP_REG_FIRST }, \
+ { "x14", 14 + GP_REG_FIRST }, \
+ { "x15", 15 + GP_REG_FIRST }, \
+ { "x16", 16 + GP_REG_FIRST }, \
+ { "x17", 17 + GP_REG_FIRST }, \
+ { "x18", 18 + GP_REG_FIRST }, \
+ { "x19", 19 + GP_REG_FIRST }, \
+ { "x20", 20 + GP_REG_FIRST }, \
+ { "x21", 21 + GP_REG_FIRST }, \
+ { "x22", 22 + GP_REG_FIRST }, \
+ { "x23", 23 + GP_REG_FIRST }, \
+ { "x24", 24 + GP_REG_FIRST }, \
+ { "x25", 25 + GP_REG_FIRST }, \
+ { "x26", 26 + GP_REG_FIRST }, \
+ { "x27", 27 + GP_REG_FIRST }, \
+ { "x28", 28 + GP_REG_FIRST }, \
+ { "x29", 29 + GP_REG_FIRST }, \
+ { "x30", 30 + GP_REG_FIRST }, \
+ { "x31", 31 + GP_REG_FIRST }, \
+ { "f0", 0 + FP_REG_FIRST }, \
+ { "f1", 1 + FP_REG_FIRST }, \
+ { "f2", 2 + FP_REG_FIRST }, \
+ { "f3", 3 + FP_REG_FIRST }, \
+ { "f4", 4 + FP_REG_FIRST }, \
+ { "f5", 5 + FP_REG_FIRST }, \
+ { "f6", 6 + FP_REG_FIRST }, \
+ { "f7", 7 + FP_REG_FIRST }, \
+ { "f8", 8 + FP_REG_FIRST }, \
+ { "f9", 9 + FP_REG_FIRST }, \
+ { "f10", 10 + FP_REG_FIRST }, \
+ { "f11", 11 + FP_REG_FIRST }, \
+ { "f12", 12 + FP_REG_FIRST }, \
+ { "f13", 13 + FP_REG_FIRST }, \
+ { "f14", 14 + FP_REG_FIRST }, \
+ { "f15", 15 + FP_REG_FIRST }, \
+ { "f16", 16 + FP_REG_FIRST }, \
+ { "f17", 17 + FP_REG_FIRST }, \
+ { "f18", 18 + FP_REG_FIRST }, \
+ { "f19", 19 + FP_REG_FIRST }, \
+ { "f20", 20 + FP_REG_FIRST }, \
+ { "f21", 21 + FP_REG_FIRST }, \
+ { "f22", 22 + FP_REG_FIRST }, \
+ { "f23", 23 + FP_REG_FIRST }, \
+ { "f24", 24 + FP_REG_FIRST }, \
+ { "f25", 25 + FP_REG_FIRST }, \
+ { "f26", 26 + FP_REG_FIRST }, \
+ { "f27", 27 + FP_REG_FIRST }, \
+ { "f28", 28 + FP_REG_FIRST }, \
+ { "f29", 29 + FP_REG_FIRST }, \
+ { "f30", 30 + FP_REG_FIRST }, \
+ { "f31", 31 + FP_REG_FIRST }, \
+}
+
+/* Globalizing directive for a label. */
+#define GLOBAL_ASM_OP "\t.globl\t"
+
+/* This is how to store into the string LABEL
+ the symbol_ref name of an internal numbered label where
+ PREFIX is the class of label and NUM is the number within the class.
+ This is suitable for output with `assemble_name'. */
+
+#undef ASM_GENERATE_INTERNAL_LABEL
+#define ASM_GENERATE_INTERNAL_LABEL(LABEL,PREFIX,NUM) \
+ sprintf ((LABEL), "*%s%s%ld", (LOCAL_LABEL_PREFIX), (PREFIX), (long)(NUM))
+
+/* This is how to output an element of a case-vector that is absolute. */
+
+#define ASM_OUTPUT_ADDR_VEC_ELT(STREAM, VALUE) \
+ fprintf (STREAM, "\t.word\t%sL%d\n", LOCAL_LABEL_PREFIX, VALUE)
+
+/* This is how to output an element of a PIC case-vector. */
+
+#define ASM_OUTPUT_ADDR_DIFF_ELT(STREAM, BODY, VALUE, REL) \
+ fprintf (STREAM, "\t.word\t%sL%d-%sL%d\n", \
+ LOCAL_LABEL_PREFIX, VALUE, LOCAL_LABEL_PREFIX, REL)
+
+/* This is how to output an assembler line
+ that says to advance the location counter
+ to a multiple of 2**LOG bytes. */
+
+#define ASM_OUTPUT_ALIGN(STREAM,LOG) \
+ fprintf (STREAM, "\t.align\t%d\n", (LOG))
+
+/* Define the strings to put out for each section in the object file. */
+#define TEXT_SECTION_ASM_OP "\t.text" /* instructions */
+#define DATA_SECTION_ASM_OP "\t.data" /* large data */
+#define READONLY_DATA_SECTION_ASM_OP "\t.section\t.rodata"
+#define BSS_SECTION_ASM_OP "\t.bss"
+#define SBSS_SECTION_ASM_OP "\t.section\t.sbss,\"aw\",@nobits"
+#define SDATA_SECTION_ASM_OP "\t.section\t.sdata,\"aw\",@progbits"
+
+#define ASM_OUTPUT_REG_PUSH(STREAM,REGNO) \
+do \
+ { \
+ fprintf (STREAM, "\taddi\t%s,%s,-8\n\t%s\t%s,0(%s)\n", \
+ reg_names[STACK_POINTER_REGNUM], \
+ reg_names[STACK_POINTER_REGNUM], \
+ TARGET_64BIT ? "sd" : "sw", \
+ reg_names[REGNO], \
+ reg_names[STACK_POINTER_REGNUM]); \
+ } \
+while (0)
+
+#define ASM_OUTPUT_REG_POP(STREAM,REGNO) \
+do \
+ { \
+ fprintf (STREAM, "\t%s\t%s,0(%s)\n\taddi\t%s,%s,8\n", \
+ TARGET_64BIT ? "ld" : "lw", \
+ reg_names[REGNO], \
+ reg_names[STACK_POINTER_REGNUM], \
+ reg_names[STACK_POINTER_REGNUM], \
+ reg_names[STACK_POINTER_REGNUM]); \
+ } \
+while (0)
+
+#define ASM_COMMENT_START "#"
+
+#undef SIZE_TYPE
+#define SIZE_TYPE (POINTER_SIZE == 64 ? "long unsigned int" : "unsigned int")
+
+#undef PTRDIFF_TYPE
+#define PTRDIFF_TYPE (POINTER_SIZE == 64 ? "long int" : "int")
+
+/* The maximum number of bytes that can be copied by one iteration of
+ a movmemsi loop; see riscv_block_move_loop. */
+#define RISCV_MAX_MOVE_BYTES_PER_LOOP_ITER (UNITS_PER_WORD * 4)
+
+/* The maximum number of bytes that can be copied by a straight-line
+ implementation of movmemsi; see riscv_block_move_straight. We want
+ to make sure that any loop-based implementation will iterate at
+ least twice. */
+#define RISCV_MAX_MOVE_BYTES_STRAIGHT (RISCV_MAX_MOVE_BYTES_PER_LOOP_ITER * 2)
+
+/* The base cost of a memcpy call, for MOVE_RATIO and friends. */
+
+#define RISCV_CALL_RATIO 6
+
+/* Any loop-based implementation of movmemsi will have at least
+ RISCV_MAX_MOVE_BYTES_STRAIGHT / UNITS_PER_WORD memory-to-memory
+ moves, so allow individual copies of fewer elements.
+
+ When movmemsi is not available, use a value approximating
+ the length of a memcpy call sequence, so that move_by_pieces
+ will generate inline code if it is shorter than a function call.
+ Since move_by_pieces_ninsns counts memory-to-memory moves, but
+ we'll have to generate a load/store pair for each, halve the
+ value of RISCV_CALL_RATIO to take that into account. */
+
+#define MOVE_RATIO(speed) \
+ (HAVE_movmemsi \
+ ? RISCV_MAX_MOVE_BYTES_STRAIGHT / MOVE_MAX \
+ : RISCV_CALL_RATIO / 2)
+
+/* For CLEAR_RATIO, when optimizing for size, give a better estimate
+ of the length of a memset call, but use the default otherwise. */
+
+#define CLEAR_RATIO(speed)\
+ ((speed) ? 15 : RISCV_CALL_RATIO)
+
+/* This is similar to CLEAR_RATIO, but for a non-zero constant, so when
+ optimizing for size adjust the ratio to account for the overhead of
+ loading the constant and replicating it across the word. */
+
+#define SET_RATIO(speed) \
+ ((speed) ? 15 : RISCV_CALL_RATIO - 2)
+
+#ifndef HAVE_AS_TLS
+#define HAVE_AS_TLS 0
+#endif
+
+#ifndef USED_FOR_TARGET
+
+extern const enum reg_class riscv_regno_to_class[];
+extern bool riscv_hard_regno_mode_ok[][FIRST_PSEUDO_REGISTER];
+extern const char* riscv_hi_relocs[];
+#endif
+
+#define ASM_PREFERRED_EH_DATA_FORMAT(CODE,GLOBAL) \
+ (((GLOBAL) ? DW_EH_PE_indirect : 0) | DW_EH_PE_pcrel | DW_EH_PE_sdata4)
diff -urN empty/gcc/config/riscv/riscv.md gcc-5.2.0/gcc/config/riscv/riscv.md
--- gcc-5.2.0/gcc/config/riscv/riscv.md 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/gcc/config/riscv/riscv.md 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1,2448 @@
+;; Machine description for RISC-V for GNU compiler.
+;; Copyright (C) 2011-2014 Free Software Foundation, Inc.
+;; Contributed by Andrew Waterman (waterman@cs.berkeley.edu) at UC Berkeley.
+;; Based on MIPS target for GNU compiler.
+
+;; This file is part of GCC.
+
+;; GCC is free software; you can redistribute it and/or modify
+;; it under the terms of the GNU General Public License as published by
+;; the Free Software Foundation; either version 3, or (at your option)
+;; any later version.
+
+;; GCC is distributed in the hope that it will be useful,
+;; but WITHOUT ANY WARRANTY; without even the implied warranty of
+;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+;; GNU General Public License for more details.
+
+;; You should have received a copy of the GNU General Public License
+;; along with GCC; see the file COPYING3. If not see
+;; <http://www.gnu.org/licenses/>.
+
+(define_c_enum "unspec" [
+ ;; Floating-point moves.
+ UNSPEC_LOAD_LOW
+ UNSPEC_LOAD_HIGH
+ UNSPEC_STORE_WORD
+
+ ;; GP manipulation.
+ UNSPEC_EH_RETURN
+
+ ;; Symbolic accesses.
+ UNSPEC_ADDRESS_FIRST
+ UNSPEC_LOAD_GOT
+ UNSPEC_TLS
+ UNSPEC_TLS_LE
+ UNSPEC_TLS_IE
+ UNSPEC_TLS_GD
+
+ ;; Register save and restore.
+ UNSPEC_GPR_SAVE
+ UNSPEC_GPR_RESTORE
+
+ ;; Blockage and synchronisation.
+ UNSPEC_BLOCKAGE
+ UNSPEC_FENCE
+ UNSPEC_FENCE_I
+])
+
+(define_constants
+ [(RETURN_ADDR_REGNUM 1)
+ (T0_REGNUM 5)
+ (T1_REGNUM 6)
+])
+
+(include "predicates.md")
+(include "constraints.md")
+
+;; ....................
+;;
+;; Attributes
+;;
+;; ....................
+
+(define_attr "got" "unset,xgot_high,load"
+ (const_string "unset"))
+
+;; For jal instructions, this attribute is DIRECT when the target address
+;; is symbolic and INDIRECT when it is a register.
+(define_attr "jal" "unset,direct,indirect"
+ (const_string "unset"))
+
+;; Classification of moves, extensions and truncations. Most values
+;; are as for "type" (see below) but there are also the following
+;; move-specific values:
+;;
+;; andi a single ANDI instruction
+;; shift_shift a shift left followed by a shift right
+;;
+;; This attribute is used to determine the instruction's length and
+;; scheduling type. For doubleword moves, the attribute always describes
+;; the split instructions; in some cases, it is more appropriate for the
+;; scheduling type to be "multi" instead.
+(define_attr "move_type"
+ "unknown,load,fpload,store,fpstore,mtc,mfc,move,fmove,
+ const,logical,arith,andi,shift_shift"
+ (const_string "unknown"))
+
+(define_attr "alu_type" "unknown,add,sub,and,or,xor"
+ (const_string "unknown"))
+
+;; Main data type used by the insn
+(define_attr "mode" "unknown,none,QI,HI,SI,DI,TI,SF,DF,TF,FPSW"
+ (const_string "unknown"))
+
+;; True if the main data type is twice the size of a word.
+(define_attr "dword_mode" "no,yes"
+ (cond [(and (eq_attr "mode" "DI,DF")
+ (eq (symbol_ref "TARGET_64BIT") (const_int 0)))
+ (const_string "yes")
+
+ (and (eq_attr "mode" "TI,TF")
+ (ne (symbol_ref "TARGET_64BIT") (const_int 0)))
+ (const_string "yes")]
+ (const_string "no")))
+
+;; Classification of each insn.
+;; branch conditional branch
+;; jump unconditional jump
+;; call unconditional call
+;; load load instruction(s)
+;; fpload floating point load
+;; fpidxload floating point indexed load
+;; store store instruction(s)
+;; fpstore floating point store
+;; fpidxstore floating point indexed store
+;; mtc transfer to coprocessor
+;; mfc transfer from coprocessor
+;; const load constant
+;; arith integer arithmetic instructions
+;; logical integer logical instructions
+;; shift integer shift instructions
+;; slt set less than instructions
+;; imul integer multiply
+;; idiv integer divide
+;; move integer register move (addi rd, rs1, 0)
+;; fmove floating point register move
+;; fadd floating point add/subtract
+;; fmul floating point multiply
+;; fmadd floating point multiply-add
+;; fdiv floating point divide
+;; fcmp floating point compare
+;; fcvt floating point convert
+;; fsqrt floating point square root
+;; multi multiword sequence (or user asm statements)
+;; nop no operation
+;; ghost an instruction that produces no real code
+(define_attr "type"
+ "unknown,branch,jump,call,load,fpload,fpidxload,store,fpstore,fpidxstore,
+ mtc,mfc,const,arith,logical,shift,slt,imul,idiv,move,fmove,fadd,fmul,
+ fmadd,fdiv,fcmp,fcvt,fsqrt,multi,nop,ghost"
+ (cond [(eq_attr "jal" "!unset") (const_string "call")
+ (eq_attr "got" "load") (const_string "load")
+
+ (eq_attr "alu_type" "add,sub") (const_string "arith")
+
+ (eq_attr "alu_type" "and,or,xor") (const_string "logical")
+
+ ;; If a doubleword move uses these expensive instructions,
+ ;; it is usually better to schedule them in the same way
+ ;; as the singleword form, rather than as "multi".
+ (eq_attr "move_type" "load") (const_string "load")
+ (eq_attr "move_type" "fpload") (const_string "fpload")
+ (eq_attr "move_type" "store") (const_string "store")
+ (eq_attr "move_type" "fpstore") (const_string "fpstore")
+ (eq_attr "move_type" "mtc") (const_string "mtc")
+ (eq_attr "move_type" "mfc") (const_string "mfc")
+
+ ;; These types of move are always single insns.
+ (eq_attr "move_type" "fmove") (const_string "fmove")
+ (eq_attr "move_type" "arith") (const_string "arith")
+ (eq_attr "move_type" "logical") (const_string "logical")
+ (eq_attr "move_type" "andi") (const_string "logical")
+
+ ;; These types of move are always split.
+ (eq_attr "move_type" "shift_shift")
+ (const_string "multi")
+
+ ;; These types of move are split for doubleword modes only.
+ (and (eq_attr "move_type" "move,const")
+ (eq_attr "dword_mode" "yes"))
+ (const_string "multi")
+ (eq_attr "move_type" "move") (const_string "move")
+ (eq_attr "move_type" "const") (const_string "const")]
+ (const_string "unknown")))
+
+;; Mode for conversion types (fcvt)
+;; I2S integer to float single (SI/DI to SF)
+;; I2D integer to float double (SI/DI to DF)
+;; S2I float to integer (SF to SI/DI)
+;; D2I float to integer (DF to SI/DI)
+;; D2S double to float single
+;; S2D float single to double
+
+(define_attr "cnv_mode" "unknown,I2S,I2D,S2I,D2I,D2S,S2D"
+ (const_string "unknown"))
+
+;; Length of instruction in bytes.
+(define_attr "length" ""
+ (cond [
+ ;; Direct branch instructions have a range of [-0x1000,0xffc],
+ ;; relative to the address of the delay slot. If a branch is
+ ;; outside this range, convert a branch like:
+ ;;
+ ;; bne r1,r2,target
+ ;;
+ ;; to:
+ ;;
+ ;; beq r1,r2,1f
+ ;; j target
+ ;; 1:
+ ;;
+ (eq_attr "type" "branch")
+ (if_then_else (and (le (minus (match_dup 0) (pc)) (const_int 4088))
+ (le (minus (pc) (match_dup 0)) (const_int 4092)))
+ (const_int 4)
+ (const_int 8))
+
+ ;; Conservatively assume calls take two instructions, as in:
+ ;; auipc t0, %pcrel_hi(target)
+ ;; jalr ra, t0, %lo(target)
+ ;; The linker will relax these into JAL when appropriate.
+ (eq_attr "type" "call")
+ (const_int 8)
+
+ ;; "Ghost" instructions occupy no space.
+ (eq_attr "type" "ghost")
+ (const_int 0)
+
+ (eq_attr "got" "load") (const_int 8)
+
+ ;; SHIFT_SHIFTs are decomposed into two separate instructions.
+ (eq_attr "move_type" "shift_shift")
+ (const_int 8)
+
+ ;; Check for doubleword moves that are decomposed into two
+ ;; instructions.
+ (and (eq_attr "move_type" "mtc,mfc,move")
+ (eq_attr "dword_mode" "yes"))
+ (const_int 8)
+
+ ;; Doubleword CONST{,N} moves are split into two word
+ ;; CONST{,N} moves.
+ (and (eq_attr "move_type" "const")
+ (eq_attr "dword_mode" "yes"))
+ (symbol_ref "riscv_split_const_insns (operands[1]) * 4")
+
+ ;; Otherwise, constants, loads and stores are handled by external
+ ;; routines.
+ (eq_attr "move_type" "load,fpload")
+ (symbol_ref "riscv_load_store_insns (operands[1], insn) * 4")
+ (eq_attr "move_type" "store,fpstore")
+ (symbol_ref "riscv_load_store_insns (operands[0], insn) * 4")
+ ] (const_int 4)))
+
+;; Describe a user's asm statement.
+(define_asm_attributes
+ [(set_attr "type" "multi")])
+
+;; This mode iterator allows 32-bit and 64-bit GPR patterns to be generated
+;; from the same template.
+(define_mode_iterator GPR [SI (DI "TARGET_64BIT")])
+(define_mode_iterator SUPERQI [HI SI (DI "TARGET_64BIT")])
+
+;; A copy of GPR that can be used when a pattern has two independent
+;; modes.
+(define_mode_iterator GPR2 [SI (DI "TARGET_64BIT")])
+
+;; This mode iterator allows :P to be used for patterns that operate on
+;; pointer-sized quantities. Exactly one of the two alternatives will match.
+(define_mode_iterator P [(SI "Pmode == SImode") (DI "Pmode == DImode")])
+
+;; 32-bit integer moves for which we provide move patterns.
+(define_mode_iterator IMOVE32 [SI])
+
+;; 64-bit modes for which we provide move patterns.
+(define_mode_iterator MOVE64 [DI DF])
+
+;; 128-bit modes for which we provide move patterns on 64-bit targets.
+(define_mode_iterator MOVE128 [TI TF])
+
+;; This mode iterator allows the QI and HI extension patterns to be
+;; defined from the same template.
+(define_mode_iterator SHORT [QI HI])
+
+;; Likewise the 64-bit truncate-and-shift patterns.
+(define_mode_iterator SUBDI [QI HI SI])
+(define_mode_iterator HISI [HI SI])
+(define_mode_iterator ANYI [QI HI SI (DI "TARGET_64BIT")])
+
+;; This mode iterator allows :ANYF to be used wherever a scalar or vector
+;; floating-point mode is allowed.
+(define_mode_iterator ANYF [(SF "TARGET_HARD_FLOAT")
+ (DF "TARGET_HARD_FLOAT")])
+(define_mode_iterator ANYIF [QI HI SI (DI "TARGET_64BIT")
+ (SF "TARGET_HARD_FLOAT")
+ (DF "TARGET_HARD_FLOAT")])
+
+;; Like ANYF, but only applies to scalar modes.
+(define_mode_iterator SCALARF [(SF "TARGET_HARD_FLOAT")
+ (DF "TARGET_HARD_FLOAT")])
+
+;; A floating-point mode for which moves involving FPRs may need to be split.
+(define_mode_iterator SPLITF
+ [(DF "!TARGET_64BIT")
+ (DI "!TARGET_64BIT")
+ (TF "TARGET_64BIT")])
+
+;; This attribute gives the length suffix for a sign- or zero-extension
+;; instruction.
+(define_mode_attr size [(QI "b") (HI "h")])
+
+;; Mode attributes for loads.
+(define_mode_attr load [(QI "lb") (HI "lh") (SI "lw") (DI "ld") (SF "flw") (DF "fld")])
+
+;; Instruction names for stores.
+(define_mode_attr store [(QI "sb") (HI "sh") (SI "sw") (DI "sd") (SF "fsw") (DF "fsd")])
+
+;; This attribute gives the best constraint to use for registers of
+;; a given mode.
+(define_mode_attr reg [(SI "d") (DI "d") (CC "d")])
+
+;; This attribute gives the format suffix for floating-point operations.
+(define_mode_attr fmt [(SF "s") (DF "d")])
+
+;; This attribute gives the format suffix for atomic memory operations.
+(define_mode_attr amo [(SI "w") (DI "d")])
+
+;; This attribute gives the upper-case mode name for one unit of a
+;; floating-point mode.
+(define_mode_attr UNITMODE [(SF "SF") (DF "DF")])
+
+;; This attribute gives the integer mode that has half the size of
+;; the controlling mode.
+(define_mode_attr HALFMODE [(DF "SI") (DI "SI") (TF "DI")])
+
+;; This code iterator allows signed and unsigned widening multiplications
+;; to use the same template.
+(define_code_iterator any_extend [sign_extend zero_extend])
+
+;; This code iterator allows the two right shift instructions to be
+;; generated from the same template.
+(define_code_iterator any_shiftrt [ashiftrt lshiftrt])
+
+;; This code iterator allows the three shift instructions to be generated
+;; from the same template.
+(define_code_iterator any_shift [ashift ashiftrt lshiftrt])
+
+;; This code iterator allows unsigned and signed division to be generated
+;; from the same template.
+(define_code_iterator any_div [div udiv])
+
+;; This code iterator allows unsigned and signed modulus to be generated
+;; from the same template.
+(define_code_iterator any_mod [mod umod])
+
+;; These code iterators allow the signed and unsigned scc operations to use
+;; the same template.
+(define_code_iterator any_gt [gt gtu])
+(define_code_iterator any_ge [ge geu])
+(define_code_iterator any_lt [lt ltu])
+(define_code_iterator any_le [le leu])
+
+;; <u> expands to an empty string when doing a signed operation and
+;; "u" when doing an unsigned operation.
+(define_code_attr u [(sign_extend "") (zero_extend "u")
+ (div "") (udiv "u")
+ (mod "") (umod "u")
+ (gt "") (gtu "u")
+ (ge "") (geu "u")
+ (lt "") (ltu "u")
+ (le "") (leu "u")])
+
+;; <su> is like <u>, but the signed form expands to "s" rather than "".
+(define_code_attr su [(sign_extend "s") (zero_extend "u")])
+
+;; <optab> expands to the name of the optab for a particular code.
+(define_code_attr optab [(ashift "ashl")
+ (ashiftrt "ashr")
+ (lshiftrt "lshr")
+ (ior "ior")
+ (xor "xor")
+ (and "and")
+ (plus "add")
+ (minus "sub")])
+
+;; <insn> expands to the name of the insn that implements a particular code.
+(define_code_attr insn [(ashift "sll")
+ (ashiftrt "sra")
+ (lshiftrt "srl")
+ (ior "or")
+ (xor "xor")
+ (and "and")
+ (plus "add")
+ (minus "sub")])
+
+;; Pipeline descriptions.
+;;
+;; generic.md provides a fallback for processors without a specific
+;; pipeline description. It is derived from the old define_function_unit
+;; version and uses the "alu" and "imuldiv" units declared below.
+;;
+;; Some of the processor-specific files are also derived from old
+;; define_function_unit descriptions and simply override the parts of
+;; generic.md that don't apply. The other processor-specific files
+;; are self-contained.
+(define_automaton "alu,imuldiv")
+
+(define_cpu_unit "alu" "alu")
+(define_cpu_unit "imuldiv" "imuldiv")
+
+;; Ghost instructions produce no real code and introduce no hazards.
+;; They exist purely to express an effect on dataflow.
+(define_insn_reservation "ghost" 0
+ (eq_attr "type" "ghost")
+ "nothing")
+
+(include "generic.md")
+
+;;
+;; ....................
+;;
+;; ADDITION
+;;
+;; ....................
+;;
+
+(define_insn "add<mode>3"
+ [(set (match_operand:ANYF 0 "register_operand" "=f")
+ (plus:ANYF (match_operand:ANYF 1 "register_operand" "f")
+ (match_operand:ANYF 2 "register_operand" "f")))]
+ ""
+ "fadd.<fmt>\t%0,%1,%2"
+ [(set_attr "type" "fadd")
+ (set_attr "mode" "<UNITMODE>")])
+
+(define_expand "add<mode>3"
+ [(set (match_operand:GPR 0 "register_operand")
+ (plus:GPR (match_operand:GPR 1 "register_operand")
+ (match_operand:GPR 2 "arith_operand")))]
+ "")
+
+(define_insn "*addsi3"
+ [(set (match_operand:SI 0 "register_operand" "=r,r")
+ (plus:SI (match_operand:GPR 1 "register_operand" "r,r")
+ (match_operand:GPR2 2 "arith_operand" "r,Q")))]
+ ""
+ { return TARGET_64BIT ? "addw\t%0,%1,%2" : "add\t%0,%1,%2"; }
+ [(set_attr "type" "arith")
+ (set_attr "mode" "SI")])
+
+(define_insn "*adddi3"
+ [(set (match_operand:DI 0 "register_operand" "=r,r")
+ (plus:DI (match_operand:DI 1 "register_operand" "r,r")
+ (match_operand:DI 2 "arith_operand" "r,Q")))]
+ "TARGET_64BIT"
+ "add\t%0,%1,%2"
+ [(set_attr "type" "arith")
+ (set_attr "mode" "DI")])
+
+(define_insn "*addsi3_extended"
+ [(set (match_operand:DI 0 "register_operand" "=r,r")
+ (sign_extend:DI
+ (plus:SI (match_operand:SI 1 "register_operand" "r,r")
+ (match_operand:SI 2 "arith_operand" "r,Q"))))]
+ "TARGET_64BIT"
+ "addw\t%0,%1,%2"
+ [(set_attr "type" "arith")
+ (set_attr "mode" "SI")])
+
+(define_insn "*adddisi3"
+ [(set (match_operand:SI 0 "register_operand" "=r,r")
+ (plus:SI (truncate:SI (match_operand:DI 1 "register_operand" "r,r"))
+ (truncate:SI (match_operand:DI 2 "arith_operand" "r,Q"))))]
+ "TARGET_64BIT"
+ "addw\t%0,%1,%2"
+ [(set_attr "type" "arith")
+ (set_attr "mode" "SI")])
+
+(define_insn "*adddisisi3"
+ [(set (match_operand:SI 0 "register_operand" "=r,r")
+ (plus:SI (truncate:SI (match_operand:DI 1 "register_operand" "r,r"))
+ (match_operand:SI 2 "arith_operand" "r,Q")))]
+ "TARGET_64BIT"
+ "addw\t%0,%1,%2"
+ [(set_attr "type" "arith")
+ (set_attr "mode" "SI")])
+
+(define_insn "*adddi3_truncsi"
+ [(set (match_operand:SI 0 "register_operand" "=r,r")
+ (truncate:SI
+ (plus:DI (match_operand:DI 1 "register_operand" "r,r")
+ (match_operand:DI 2 "arith_operand" "r,Q"))))]
+ "TARGET_64BIT"
+ "addw\t%0,%1,%2"
+ [(set_attr "type" "arith")
+ (set_attr "mode" "SI")])
+
+;;
+;; ....................
+;;
+;; SUBTRACTION
+;;
+;; ....................
+;;
+
+(define_insn "sub<mode>3"
+ [(set (match_operand:ANYF 0 "register_operand" "=f")
+ (minus:ANYF (match_operand:ANYF 1 "register_operand" "f")
+ (match_operand:ANYF 2 "register_operand" "f")))]
+ ""
+ "fsub.<fmt>\t%0,%1,%2"
+ [(set_attr "type" "fadd")
+ (set_attr "mode" "<UNITMODE>")])
+
+(define_expand "sub<mode>3"
+ [(set (match_operand:GPR 0 "register_operand")
+ (minus:GPR (match_operand:GPR 1 "reg_or_0_operand")
+ (match_operand:GPR 2 "register_operand")))]
+ "")
+
+(define_insn "*subdi3"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (minus:DI (match_operand:DI 1 "reg_or_0_operand" "rJ")
+ (match_operand:DI 2 "register_operand" "r")))]
+ "TARGET_64BIT"
+ "sub\t%0,%z1,%2"
+ [(set_attr "type" "arith")
+ (set_attr "mode" "DI")])
+
+(define_insn "*subsi3"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (minus:SI (match_operand:GPR 1 "reg_or_0_operand" "rJ")
+ (match_operand:GPR2 2 "register_operand" "r")))]
+ ""
+ { return TARGET_64BIT ? "subw\t%0,%z1,%2" : "sub\t%0,%z1,%2"; }
+ [(set_attr "type" "arith")
+ (set_attr "mode" "SI")])
+
+(define_insn "*subsi3_extended"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (sign_extend:DI
+ (minus:SI (match_operand:SI 1 "reg_or_0_operand" "rJ")
+ (match_operand:SI 2 "register_operand" "r"))))]
+ "TARGET_64BIT"
+ "subw\t%0,%z1,%2"
+ [(set_attr "type" "arith")
+ (set_attr "mode" "DI")])
+
+(define_insn "*subdisi3"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (minus:SI (truncate:SI (match_operand:DI 1 "reg_or_0_operand" "rJ"))
+ (truncate:SI (match_operand:DI 2 "register_operand" "r"))))]
+ "TARGET_64BIT"
+ "subw\t%0,%z1,%2"
+ [(set_attr "type" "arith")
+ (set_attr "mode" "SI")])
+
+(define_insn "*subdisisi3"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (minus:SI (truncate:SI (match_operand:DI 1 "reg_or_0_operand" "rJ"))
+ (match_operand:SI 2 "register_operand" "r")))]
+ "TARGET_64BIT"
+ "subw\t%0,%z1,%2"
+ [(set_attr "type" "arith")
+ (set_attr "mode" "SI")])
+
+(define_insn "*subsidisi3"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (minus:SI (match_operand:SI 1 "reg_or_0_operand" "rJ")
+ (truncate:SI (match_operand:DI 2 "register_operand" "r"))))]
+ "TARGET_64BIT"
+ "subw\t%0,%z1,%2"
+ [(set_attr "type" "arith")
+ (set_attr "mode" "SI")])
+
+(define_insn "*subdi3_truncsi"
+ [(set (match_operand:SI 0 "register_operand" "=r,r")
+ (truncate:SI
+ (minus:DI (match_operand:DI 1 "reg_or_0_operand" "rJ,r")
+ (match_operand:DI 2 "arith_operand" "r,Q"))))]
+ "TARGET_64BIT"
+ "subw\t%0,%z1,%2"
+ [(set_attr "type" "arith")
+ (set_attr "mode" "SI")])
+
+;;
+;; ....................
+;;
+;; MULTIPLICATION
+;;
+;; ....................
+;;
+
+(define_insn "mul<mode>3"
+ [(set (match_operand:SCALARF 0 "register_operand" "=f")
+ (mult:SCALARF (match_operand:SCALARF 1 "register_operand" "f")
+ (match_operand:SCALARF 2 "register_operand" "f")))]
+ ""
+ "fmul.<fmt>\t%0,%1,%2"
+ [(set_attr "type" "fmul")
+ (set_attr "mode" "<UNITMODE>")])
+
+(define_expand "mul<mode>3"
+ [(set (match_operand:GPR 0 "register_operand")
+ (mult:GPR (match_operand:GPR 1 "reg_or_0_operand")
+ (match_operand:GPR 2 "register_operand")))]
+ "TARGET_MULDIV")
+
+(define_insn "*mulsi3"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (mult:SI (match_operand:GPR 1 "register_operand" "r")
+ (match_operand:GPR2 2 "register_operand" "r")))]
+ "TARGET_MULDIV"
+ { return TARGET_64BIT ? "mulw\t%0,%1,%2" : "mul\t%0,%1,%2"; }
+ [(set_attr "type" "imul")
+ (set_attr "mode" "SI")])
+
+(define_insn "*muldisi3"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (mult:SI (truncate:SI (match_operand:DI 1 "register_operand" "r"))
+ (truncate:SI (match_operand:DI 2 "register_operand" "r"))))]
+ "TARGET_MULDIV && TARGET_64BIT"
+ "mulw\t%0,%1,%2"
+ [(set_attr "type" "imul")
+ (set_attr "mode" "SI")])
+
+(define_insn "*muldi3_truncsi"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (truncate:SI
+ (mult:DI (match_operand:DI 1 "register_operand" "r")
+ (match_operand:DI 2 "register_operand" "r"))))]
+ "TARGET_MULDIV && TARGET_64BIT"
+ "mulw\t%0,%1,%2"
+ [(set_attr "type" "imul")
+ (set_attr "mode" "SI")])
+
+(define_insn "*muldi3"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (mult:DI (match_operand:DI 1 "register_operand" "r")
+ (match_operand:DI 2 "register_operand" "r")))]
+ "TARGET_MULDIV && TARGET_64BIT"
+ "mul\t%0,%1,%2"
+ [(set_attr "type" "imul")
+ (set_attr "mode" "DI")])
+
+;;
+;; ........................
+;;
+;; MULTIPLICATION HIGH-PART
+;;
+;; ........................
+;;
+
+
+;; Using a clobber here is ghetto, but I'm not smart enough to do better. '
+(define_insn_and_split "<u>mulditi3"
+ [(set (match_operand:TI 0 "register_operand" "=r")
+ (mult:TI (any_extend:TI
+ (match_operand:DI 1 "register_operand" "r"))
+ (any_extend:TI
+ (match_operand:DI 2 "register_operand" "r"))))
+ (clobber (match_scratch:DI 3 "=r"))]
+ "TARGET_MULDIV && TARGET_64BIT"
+ "#"
+ "reload_completed"
+ [
+ (set (match_dup 3) (mult:DI (match_dup 1) (match_dup 2)))
+ (set (match_dup 4) (truncate:DI
+ (lshiftrt:TI
+ (mult:TI (any_extend:TI (match_dup 1))
+ (any_extend:TI (match_dup 2)))
+ (const_int 64))))
+ (set (match_dup 5) (match_dup 3))
+ ]
+{
+ operands[4] = riscv_subword (operands[0], true);
+ operands[5] = riscv_subword (operands[0], false);
+}
+ )
+
+(define_insn "<u>muldi3_highpart"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (truncate:DI
+ (lshiftrt:TI
+ (mult:TI (any_extend:TI
+ (match_operand:DI 1 "register_operand" "r"))
+ (any_extend:TI
+ (match_operand:DI 2 "register_operand" "r")))
+ (const_int 64))))]
+ "TARGET_MULDIV && TARGET_64BIT"
+ "mulh<u>\t%0,%1,%2"
+ [(set_attr "type" "imul")
+ (set_attr "mode" "DI")])
+
+
+(define_insn_and_split "usmulditi3"
+ [(set (match_operand:TI 0 "register_operand" "=r")
+ (mult:TI (zero_extend:TI
+ (match_operand:DI 1 "register_operand" "r"))
+ (sign_extend:TI
+ (match_operand:DI 2 "register_operand" "r"))))
+ (clobber (match_scratch:DI 3 "=r"))]
+ "TARGET_MULDIV && TARGET_64BIT"
+ "#"
+ "reload_completed"
+ [
+ (set (match_dup 3) (mult:DI (match_dup 1) (match_dup 2)))
+ (set (match_dup 4) (truncate:DI
+ (lshiftrt:TI
+ (mult:TI (zero_extend:TI (match_dup 1))
+ (sign_extend:TI (match_dup 2)))
+ (const_int 64))))
+ (set (match_dup 5) (match_dup 3))
+ ]
+{
+ operands[4] = riscv_subword (operands[0], true);
+ operands[5] = riscv_subword (operands[0], false);
+}
+ )
+
+(define_insn "usmuldi3_highpart"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (truncate:DI
+ (lshiftrt:TI
+ (mult:TI (zero_extend:TI
+ (match_operand:DI 1 "register_operand" "r"))
+ (sign_extend:TI
+ (match_operand:DI 2 "register_operand" "r")))
+ (const_int 64))))]
+ "TARGET_MULDIV && TARGET_64BIT"
+ "mulhsu\t%0,%2,%1"
+ [(set_attr "type" "imul")
+ (set_attr "mode" "DI")])
+
+(define_expand "<u>mulsidi3"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (mult:DI (any_extend:DI
+ (match_operand:SI 1 "register_operand" "r"))
+ (any_extend:DI
+ (match_operand:SI 2 "register_operand" "r"))))
+ (clobber (match_scratch:SI 3 "=r"))]
+ "TARGET_MULDIV && !TARGET_64BIT"
+{
+ rtx temp = gen_reg_rtx (SImode);
+ emit_insn (gen_mulsi3 (temp, operands[1], operands[2]));
+ emit_insn (gen_<u>mulsi3_highpart (riscv_subword (operands[0], true),
+ operands[1], operands[2]));
+ emit_insn (gen_movsi (riscv_subword (operands[0], false), temp));
+ DONE;
+}
+ )
+
+(define_insn "<u>mulsi3_highpart"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (truncate:SI
+ (lshiftrt:DI
+ (mult:DI (any_extend:DI
+ (match_operand:SI 1 "register_operand" "r"))
+ (any_extend:DI
+ (match_operand:SI 2 "register_operand" "r")))
+ (const_int 32))))]
+ "TARGET_MULDIV && !TARGET_64BIT"
+ "mulh<u>\t%0,%1,%2"
+ [(set_attr "type" "imul")
+ (set_attr "mode" "SI")])
+
+
+(define_expand "usmulsidi3"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (mult:DI (zero_extend:DI
+ (match_operand:SI 1 "register_operand" "r"))
+ (sign_extend:DI
+ (match_operand:SI 2 "register_operand" "r"))))
+ (clobber (match_scratch:SI 3 "=r"))]
+ "TARGET_MULDIV && !TARGET_64BIT"
+{
+ rtx temp = gen_reg_rtx (SImode);
+ emit_insn (gen_mulsi3 (temp, operands[1], operands[2]));
+ emit_insn (gen_usmulsi3_highpart (riscv_subword (operands[0], true),
+ operands[1], operands[2]));
+ emit_insn (gen_movsi (riscv_subword (operands[0], false), temp));
+ DONE;
+}
+ )
+
+(define_insn "usmulsi3_highpart"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (truncate:SI
+ (lshiftrt:DI
+ (mult:DI (zero_extend:DI
+ (match_operand:SI 1 "register_operand" "r"))
+ (sign_extend:DI
+ (match_operand:SI 2 "register_operand" "r")))
+ (const_int 32))))]
+ "TARGET_MULDIV && !TARGET_64BIT"
+ "mulhsu\t%0,%2,%1"
+ [(set_attr "type" "imul")
+ (set_attr "mode" "SI")])
+
+;;
+;; ....................
+;;
+;; DIVISION and REMAINDER
+;;
+;; ....................
+;;
+
+(define_insn "<u>divsi3"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (any_div:SI (match_operand:SI 1 "register_operand" "r")
+ (match_operand:SI 2 "register_operand" "r")))]
+ "TARGET_MULDIV"
+ { return TARGET_64BIT ? "div<u>w\t%0,%1,%2" : "div<u>\t%0,%1,%2"; }
+ [(set_attr "type" "idiv")
+ (set_attr "mode" "SI")])
+
+(define_insn "<u>divdi3"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (any_div:DI (match_operand:DI 1 "register_operand" "r")
+ (match_operand:DI 2 "register_operand" "r")))]
+ "TARGET_MULDIV && TARGET_64BIT"
+ "div<u>\t%0,%1,%2"
+ [(set_attr "type" "idiv")
+ (set_attr "mode" "DI")])
+
+(define_insn "<u>modsi3"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (any_mod:SI (match_operand:SI 1 "register_operand" "r")
+ (match_operand:SI 2 "register_operand" "r")))]
+ "TARGET_MULDIV"
+ { return TARGET_64BIT ? "rem<u>w\t%0,%1,%2" : "rem<u>\t%0,%1,%2"; }
+ [(set_attr "type" "idiv")
+ (set_attr "mode" "SI")])
+
+(define_insn "<u>moddi3"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (any_mod:DI (match_operand:DI 1 "register_operand" "r")
+ (match_operand:DI 2 "register_operand" "r")))]
+ "TARGET_MULDIV && TARGET_64BIT"
+ "rem<u>\t%0,%1,%2"
+ [(set_attr "type" "idiv")
+ (set_attr "mode" "DI")])
+
+(define_insn "div<mode>3"
+ [(set (match_operand:ANYF 0 "register_operand" "=f")
+ (div:ANYF (match_operand:ANYF 1 "register_operand" "f")
+ (match_operand:ANYF 2 "register_operand" "f")))]
+ "TARGET_HARD_FLOAT && TARGET_FDIV"
+ "fdiv.<fmt>\t%0,%1,%2"
+ [(set_attr "type" "fdiv")
+ (set_attr "mode" "<UNITMODE>")])
+
+;;
+;; ....................
+;;
+;; SQUARE ROOT
+;;
+;; ....................
+
+(define_insn "sqrt<mode>2"
+ [(set (match_operand:ANYF 0 "register_operand" "=f")
+ (sqrt:ANYF (match_operand:ANYF 1 "register_operand" "f")))]
+ "TARGET_HARD_FLOAT && TARGET_FDIV"
+{
+ return "fsqrt.<fmt>\t%0,%1";
+}
+ [(set_attr "type" "fsqrt")
+ (set_attr "mode" "<UNITMODE>")])
+
+;; Floating point multiply accumulate instructions.
+
+(define_insn "fma<mode>4"
+ [(set (match_operand:ANYF 0 "register_operand" "=f")
+ (fma:ANYF
+ (match_operand:ANYF 1 "register_operand" "f")
+ (match_operand:ANYF 2 "register_operand" "f")
+ (match_operand:ANYF 3 "register_operand" "f")))]
+ "TARGET_HARD_FLOAT"
+ "fmadd.<fmt>\t%0,%1,%2,%3"
+ [(set_attr "type" "fmadd")
+ (set_attr "mode" "<UNITMODE>")])
+
+(define_insn "fms<mode>4"
+ [(set (match_operand:ANYF 0 "register_operand" "=f")
+ (fma:ANYF
+ (match_operand:ANYF 1 "register_operand" "f")
+ (match_operand:ANYF 2 "register_operand" "f")
+ (neg:ANYF (match_operand:ANYF 3 "register_operand" "f"))))]
+ "TARGET_HARD_FLOAT"
+ "fmsub.<fmt>\t%0,%1,%2,%3"
+ [(set_attr "type" "fmadd")
+ (set_attr "mode" "<UNITMODE>")])
+
+(define_insn "nfma<mode>4"
+ [(set (match_operand:ANYF 0 "register_operand" "=f")
+ (neg:ANYF
+ (fma:ANYF
+ (match_operand:ANYF 1 "register_operand" "f")
+ (match_operand:ANYF 2 "register_operand" "f")
+ (match_operand:ANYF 3 "register_operand" "f"))))]
+ "TARGET_HARD_FLOAT"
+ "fnmadd.<fmt>\t%0,%1,%2,%3"
+ [(set_attr "type" "fmadd")
+ (set_attr "mode" "<UNITMODE>")])
+
+(define_insn "nfms<mode>4"
+ [(set (match_operand:ANYF 0 "register_operand" "=f")
+ (neg:ANYF
+ (fma:ANYF
+ (match_operand:ANYF 1 "register_operand" "f")
+ (match_operand:ANYF 2 "register_operand" "f")
+ (neg:ANYF (match_operand:ANYF 3 "register_operand" "f")))))]
+ "TARGET_HARD_FLOAT"
+ "fnmsub.<fmt>\t%0,%1,%2,%3"
+ [(set_attr "type" "fmadd")
+ (set_attr "mode" "<UNITMODE>")])
+
+;; modulo signed zeros, -(a*b+c) == -c-a*b
+(define_insn "*nfma<mode>4_fastmath"
+ [(set (match_operand:ANYF 0 "register_operand" "=f")
+ (minus:ANYF
+ (match_operand:ANYF 3 "register_operand" "f")
+ (mult:ANYF
+ (neg:ANYF (match_operand:ANYF 1 "register_operand" "f"))
+ (match_operand:ANYF 2 "register_operand" "f"))))]
+ "TARGET_HARD_FLOAT && !HONOR_SIGNED_ZEROS (<MODE>mode)"
+ "fnmadd.<fmt>\t%0,%1,%2,%3"
+ [(set_attr "type" "fmadd")
+ (set_attr "mode" "<UNITMODE>")])
+
+;; modulo signed zeros, -(a*b-c) == c-a*b
+(define_insn "*nfms<mode>4_fastmath"
+ [(set (match_operand:ANYF 0 "register_operand" "=f")
+ (minus:ANYF
+ (match_operand:ANYF 3 "register_operand" "f")
+ (mult:ANYF
+ (match_operand:ANYF 1 "register_operand" "f")
+ (match_operand:ANYF 2 "register_operand" "f"))))]
+ "TARGET_HARD_FLOAT && !HONOR_SIGNED_ZEROS (<MODE>mode)"
+ "fnmsub.<fmt>\t%0,%1,%2,%3"
+ [(set_attr "type" "fmadd")
+ (set_attr "mode" "<UNITMODE>")])
+
+;;
+;; ....................
+;;
+;; ABSOLUTE VALUE
+;;
+;; ....................
+
+(define_insn "abs<mode>2"
+ [(set (match_operand:ANYF 0 "register_operand" "=f")
+ (abs:ANYF (match_operand:ANYF 1 "register_operand" "f")))]
+ "TARGET_HARD_FLOAT"
+ "fabs.<fmt>\t%0,%1"
+ [(set_attr "type" "fmove")
+ (set_attr "mode" "<UNITMODE>")])
+
+
+;;
+;; ....................
+;;
+;; MIN/MAX
+;;
+;; ....................
+
+(define_insn "smin<mode>3"
+ [(set (match_operand:ANYF 0 "register_operand" "=f")
+ (smin:ANYF (match_operand:ANYF 1 "register_operand" "f")
+ (match_operand:ANYF 2 "register_operand" "f")))]
+ "TARGET_HARD_FLOAT"
+ "fmin.<fmt>\t%0,%1,%2"
+ [(set_attr "type" "fmove")
+ (set_attr "mode" "<UNITMODE>")])
+
+(define_insn "smax<mode>3"
+ [(set (match_operand:ANYF 0 "register_operand" "=f")
+ (smax:ANYF (match_operand:ANYF 1 "register_operand" "f")
+ (match_operand:ANYF 2 "register_operand" "f")))]
+ "TARGET_HARD_FLOAT"
+ "fmax.<fmt>\t%0,%1,%2"
+ [(set_attr "type" "fmove")
+ (set_attr "mode" "<UNITMODE>")])
+
+
+;;
+;; ....................
+;;
+;; NEGATION and ONE'S COMPLEMENT '
+;;
+;; ....................
+
+(define_insn "neg<mode>2"
+ [(set (match_operand:ANYF 0 "register_operand" "=f")
+ (neg:ANYF (match_operand:ANYF 1 "register_operand" "f")))]
+ "TARGET_HARD_FLOAT"
+ "fneg.<fmt>\t%0,%1"
+ [(set_attr "type" "fmove")
+ (set_attr "mode" "<UNITMODE>")])
+
+(define_insn "one_cmpl<mode>2"
+ [(set (match_operand:GPR 0 "register_operand" "=r")
+ (not:GPR (match_operand:GPR 1 "register_operand" "r")))]
+ ""
+ "not\t%0,%1"
+ [(set_attr "type" "logical")
+ (set_attr "mode" "<MODE>")])
+
+;;
+;; ....................
+;;
+;; LOGICAL
+;;
+;; ....................
+;;
+
+(define_insn "and<mode>3"
+ [(set (match_operand:GPR 0 "register_operand" "=r,r")
+ (and:GPR (match_operand:GPR 1 "register_operand" "%r,r")
+ (match_operand:GPR 2 "arith_operand" "r,Q")))]
+ ""
+ "and\t%0,%1,%2"
+ [(set_attr "type" "logical")
+ (set_attr "mode" "<MODE>")])
+
+(define_insn "ior<mode>3"
+ [(set (match_operand:GPR 0 "register_operand" "=r,r")
+ (ior:GPR (match_operand:GPR 1 "register_operand" "%r,r")
+ (match_operand:GPR 2 "arith_operand" "r,Q")))]
+ ""
+ "or\t%0,%1,%2"
+ [(set_attr "type" "logical")
+ (set_attr "mode" "<MODE>")])
+
+(define_insn "xor<mode>3"
+ [(set (match_operand:GPR 0 "register_operand" "=r,r")
+ (xor:GPR (match_operand:GPR 1 "register_operand" "%r,r")
+ (match_operand:GPR 2 "arith_operand" "r,Q")))]
+ ""
+ "xor\t%0,%1,%2"
+ [(set_attr "type" "logical")
+ (set_attr "mode" "<MODE>")])
+
+;;
+;; ....................
+;;
+;; TRUNCATION
+;;
+;; ....................
+
+(define_insn "truncdfsf2"
+ [(set (match_operand:SF 0 "register_operand" "=f")
+ (float_truncate:SF (match_operand:DF 1 "register_operand" "f")))]
+ "TARGET_HARD_FLOAT"
+ "fcvt.s.d\t%0,%1"
+ [(set_attr "type" "fcvt")
+ (set_attr "cnv_mode" "D2S")
+ (set_attr "mode" "SF")])
+
+;; Integer truncation patterns. Truncating to HImode/QImode is a no-op.
+;; Truncating from DImode to SImode is not, because we always keep SImode
+;; values sign-extended in a register so we can safely use DImode branches
+;; and comparisons on SImode values.
+
+(define_insn "truncdisi2"
+ [(set (match_operand:SI 0 "nonimmediate_operand" "=r,m")
+ (truncate:SI (match_operand:DI 1 "register_operand" "r,r")))]
+ "TARGET_64BIT"
+ "@
+ sext.w\t%0,%1
+ sw\t%1,%0"
+ [(set_attr "move_type" "arith,store")
+ (set_attr "mode" "SI")])
+
+;; Combiner patterns to optimize shift/truncate combinations.
+
+(define_insn "*ashr_trunc<mode>"
+ [(set (match_operand:SUBDI 0 "register_operand" "=r")
+ (truncate:SUBDI
+ (ashiftrt:DI (match_operand:DI 1 "register_operand" "r")
+ (match_operand:DI 2 "const_arith_operand" ""))))]
+ "TARGET_64BIT && IN_RANGE (INTVAL (operands[2]), 32, 63)"
+ "sra\t%0,%1,%2"
+ [(set_attr "type" "shift")
+ (set_attr "mode" "<MODE>")])
+
+(define_insn "*lshr32_trunc<mode>"
+ [(set (match_operand:SUBDI 0 "register_operand" "=r")
+ (truncate:SUBDI
+ (lshiftrt:DI (match_operand:DI 1 "register_operand" "r")
+ (const_int 32))))]
+ "TARGET_64BIT"
+ "sra\t%0,%1,32"
+ [(set_attr "type" "shift")
+ (set_attr "mode" "<MODE>")])
+
+;;
+;; ....................
+;;
+;; ZERO EXTENSION
+;;
+;; ....................
+
+;; Extension insns.
+
+(define_insn_and_split "zero_extendsidi2"
+ [(set (match_operand:DI 0 "register_operand" "=r,r")
+ (zero_extend:DI (match_operand:SI 1 "nonimmediate_operand" "r,W")))]
+ "TARGET_64BIT"
+ "@
+ #
+ lwu\t%0,%1"
+ "&& reload_completed && REG_P (operands[1])"
+ [(set (match_dup 0)
+ (ashift:DI (match_dup 1) (const_int 32)))
+ (set (match_dup 0)
+ (lshiftrt:DI (match_dup 0) (const_int 32)))]
+ { operands[1] = gen_lowpart (DImode, operands[1]); }
+ [(set_attr "move_type" "shift_shift,load")
+ (set_attr "mode" "DI")])
+
+;; Combine is not allowed to convert this insn into a zero_extendsidi2
+;; because of TRULY_NOOP_TRUNCATION.
+
+(define_insn_and_split "*clear_upper32"
+ [(set (match_operand:DI 0 "register_operand" "=r,r")
+ (and:DI (match_operand:DI 1 "nonimmediate_operand" "r,W")
+ (const_int 4294967295)))]
+ "TARGET_64BIT"
+{
+ if (which_alternative == 0)
+ return "#";
+
+ operands[1] = gen_lowpart (SImode, operands[1]);
+ return "lwu\t%0,%1";
+}
+ "&& reload_completed && REG_P (operands[1])"
+ [(set (match_dup 0)
+ (ashift:DI (match_dup 1) (const_int 32)))
+ (set (match_dup 0)
+ (lshiftrt:DI (match_dup 0) (const_int 32)))]
+ ""
+ [(set_attr "move_type" "shift_shift,load")
+ (set_attr "mode" "DI")])
+
+(define_insn_and_split "zero_extendhi<GPR:mode>2"
+ [(set (match_operand:GPR 0 "register_operand" "=r,r")
+ (zero_extend:GPR (match_operand:HI 1 "nonimmediate_operand" "r,m")))]
+ ""
+ "@
+ #
+ lhu\t%0,%1"
+ "&& reload_completed && REG_P (operands[1])"
+ [(set (match_dup 0)
+ (ashift:GPR (match_dup 1) (match_dup 2)))
+ (set (match_dup 0)
+ (lshiftrt:GPR (match_dup 0) (match_dup 2)))]
+ {
+ operands[1] = gen_lowpart (<GPR:MODE>mode, operands[1]);
+ operands[2] = GEN_INT(GET_MODE_BITSIZE(<GPR:MODE>mode) - 16);
+ }
+ [(set_attr "move_type" "shift_shift,load")
+ (set_attr "mode" "<GPR:MODE>")])
+
+(define_insn "zero_extendqi<SUPERQI:mode>2"
+ [(set (match_operand:SUPERQI 0 "register_operand" "=r,r")
+ (zero_extend:SUPERQI
+ (match_operand:QI 1 "nonimmediate_operand" "r,m")))]
+ ""
+ "@
+ and\t%0,%1,0xff
+ lbu\t%0,%1"
+ [(set_attr "move_type" "andi,load")
+ (set_attr "mode" "<SUPERQI:MODE>")])
+
+;;
+;; ....................
+;;
+;; SIGN EXTENSION
+;;
+;; ....................
+
+;; Extension insns.
+;; Those for integer source operand are ordered widest source type first.
+
+;; When TARGET_64BIT, all SImode integer registers should already be in
+;; sign-extended form (see TRULY_NOOP_TRUNCATION and truncdisi2). We can
+;; therefore get rid of register->register instructions if we constrain
+;; the source to be in the same register as the destination.
+;;
+;; The register alternative has type "arith" so that the pre-reload
+;; scheduler will treat it as a move. This reflects what happens if
+;; the register alternative needs a reload.
+(define_insn_and_split "extendsidi2"
+ [(set (match_operand:DI 0 "register_operand" "=r,r")
+ (sign_extend:DI (match_operand:SI 1 "nonimmediate_operand" "r,m")))]
+ "TARGET_64BIT"
+ "@
+ #
+ lw\t%0,%1"
+ "&& reload_completed && register_operand (operands[1], VOIDmode)"
+ [(set (match_dup 0) (match_dup 1))]
+{
+ if (REGNO (operands[0]) == REGNO (operands[1]))
+ {
+ emit_note (NOTE_INSN_DELETED);
+ DONE;
+ }
+ operands[1] = gen_rtx_REG (DImode, REGNO (operands[1]));
+}
+ [(set_attr "move_type" "move,load")
+ (set_attr "mode" "DI")])
+
+(define_insn_and_split "extend<SHORT:mode><SUPERQI:mode>2"
+ [(set (match_operand:SUPERQI 0 "register_operand" "=r,r")
+ (sign_extend:SUPERQI
+ (match_operand:SHORT 1 "nonimmediate_operand" "r,m")))]
+ ""
+ "@
+ #
+ l<SHORT:size>\t%0,%1"
+ "&& reload_completed && REG_P (operands[1])"
+ [(set (match_dup 0) (ashift:SI (match_dup 1) (match_dup 2)))
+ (set (match_dup 0) (ashiftrt:SI (match_dup 0) (match_dup 2)))]
+{
+ operands[0] = gen_lowpart (SImode, operands[0]);
+ operands[1] = gen_lowpart (SImode, operands[1]);
+ operands[2] = GEN_INT (GET_MODE_BITSIZE (SImode)
+ - GET_MODE_BITSIZE (<SHORT:MODE>mode));
+}
+ [(set_attr "move_type" "shift_shift,load")
+ (set_attr "mode" "SI")])
+
+(define_insn "extendsfdf2"
+ [(set (match_operand:DF 0 "register_operand" "=f")
+ (float_extend:DF (match_operand:SF 1 "register_operand" "f")))]
+ "TARGET_HARD_FLOAT"
+ "fcvt.d.s\t%0,%1"
+ [(set_attr "type" "fcvt")
+ (set_attr "cnv_mode" "S2D")
+ (set_attr "mode" "DF")])
+
+;;
+;; ....................
+;;
+;; CONVERSIONS
+;;
+;; ....................
+
+(define_insn "fix_truncdfsi2"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (fix:SI (match_operand:DF 1 "register_operand" "f")))]
+ "TARGET_HARD_FLOAT"
+ "fcvt.w.d %0,%1,rtz"
+ [(set_attr "type" "fcvt")
+ (set_attr "mode" "DF")
+ (set_attr "cnv_mode" "D2I")])
+
+
+(define_insn "fix_truncsfsi2"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (fix:SI (match_operand:SF 1 "register_operand" "f")))]
+ "TARGET_HARD_FLOAT"
+ "fcvt.w.s %0,%1,rtz"
+ [(set_attr "type" "fcvt")
+ (set_attr "mode" "SF")
+ (set_attr "cnv_mode" "S2I")])
+
+
+(define_insn "fix_truncdfdi2"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (fix:DI (match_operand:DF 1 "register_operand" "f")))]
+ "TARGET_HARD_FLOAT && TARGET_64BIT"
+ "fcvt.l.d %0,%1,rtz"
+ [(set_attr "type" "fcvt")
+ (set_attr "mode" "DF")
+ (set_attr "cnv_mode" "D2I")])
+
+
+(define_insn "fix_truncsfdi2"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (fix:DI (match_operand:SF 1 "register_operand" "f")))]
+ "TARGET_HARD_FLOAT && TARGET_64BIT"
+ "fcvt.l.s %0,%1,rtz"
+ [(set_attr "type" "fcvt")
+ (set_attr "mode" "SF")
+ (set_attr "cnv_mode" "S2I")])
+
+
+(define_insn "floatsidf2"
+ [(set (match_operand:DF 0 "register_operand" "=f")
+ (float:DF (match_operand:SI 1 "reg_or_0_operand" "rJ")))]
+ "TARGET_HARD_FLOAT"
+ "fcvt.d.w\t%0,%z1"
+ [(set_attr "type" "fcvt")
+ (set_attr "mode" "DF")
+ (set_attr "cnv_mode" "I2D")])
+
+
+(define_insn "floatdidf2"
+ [(set (match_operand:DF 0 "register_operand" "=f")
+ (float:DF (match_operand:DI 1 "reg_or_0_operand" "rJ")))]
+ "TARGET_HARD_FLOAT && TARGET_64BIT"
+ "fcvt.d.l\t%0,%z1"
+ [(set_attr "type" "fcvt")
+ (set_attr "mode" "DF")
+ (set_attr "cnv_mode" "I2D")])
+
+
+(define_insn "floatsisf2"
+ [(set (match_operand:SF 0 "register_operand" "=f")
+ (float:SF (match_operand:SI 1 "reg_or_0_operand" "rJ")))]
+ "TARGET_HARD_FLOAT"
+ "fcvt.s.w\t%0,%z1"
+ [(set_attr "type" "fcvt")
+ (set_attr "mode" "SF")
+ (set_attr "cnv_mode" "I2S")])
+
+
+(define_insn "floatdisf2"
+ [(set (match_operand:SF 0 "register_operand" "=f")
+ (float:SF (match_operand:DI 1 "reg_or_0_operand" "rJ")))]
+ "TARGET_HARD_FLOAT && TARGET_64BIT"
+ "fcvt.s.l\t%0,%z1"
+ [(set_attr "type" "fcvt")
+ (set_attr "mode" "SF")
+ (set_attr "cnv_mode" "I2S")])
+
+
+(define_insn "floatunssidf2"
+ [(set (match_operand:DF 0 "register_operand" "=f")
+ (unsigned_float:DF (match_operand:SI 1 "reg_or_0_operand" "rJ")))]
+ "TARGET_HARD_FLOAT"
+ "fcvt.d.wu\t%0,%z1"
+ [(set_attr "type" "fcvt")
+ (set_attr "mode" "DF")
+ (set_attr "cnv_mode" "I2D")])
+
+
+(define_insn "floatunsdidf2"
+ [(set (match_operand:DF 0 "register_operand" "=f")
+ (unsigned_float:DF (match_operand:DI 1 "reg_or_0_operand" "rJ")))]
+ "TARGET_HARD_FLOAT && TARGET_64BIT"
+ "fcvt.d.lu\t%0,%z1"
+ [(set_attr "type" "fcvt")
+ (set_attr "mode" "DF")
+ (set_attr "cnv_mode" "I2D")])
+
+
+(define_insn "floatunssisf2"
+ [(set (match_operand:SF 0 "register_operand" "=f")
+ (unsigned_float:SF (match_operand:SI 1 "reg_or_0_operand" "rJ")))]
+ "TARGET_HARD_FLOAT"
+ "fcvt.s.wu\t%0,%z1"
+ [(set_attr "type" "fcvt")
+ (set_attr "mode" "SF")
+ (set_attr "cnv_mode" "I2S")])
+
+
+(define_insn "floatunsdisf2"
+ [(set (match_operand:SF 0 "register_operand" "=f")
+ (unsigned_float:SF (match_operand:DI 1 "reg_or_0_operand" "rJ")))]
+ "TARGET_HARD_FLOAT && TARGET_64BIT"
+ "fcvt.s.lu\t%0,%z1"
+ [(set_attr "type" "fcvt")
+ (set_attr "mode" "SF")
+ (set_attr "cnv_mode" "I2S")])
+
+
+(define_insn "fixuns_truncdfsi2"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (unsigned_fix:SI (match_operand:DF 1 "register_operand" "f")))]
+ "TARGET_HARD_FLOAT"
+ "fcvt.wu.d %0,%1,rtz"
+ [(set_attr "type" "fcvt")
+ (set_attr "mode" "DF")
+ (set_attr "cnv_mode" "D2I")])
+
+
+(define_insn "fixuns_truncsfsi2"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (unsigned_fix:SI (match_operand:SF 1 "register_operand" "f")))]
+ "TARGET_HARD_FLOAT"
+ "fcvt.wu.s %0,%1,rtz"
+ [(set_attr "type" "fcvt")
+ (set_attr "mode" "SF")
+ (set_attr "cnv_mode" "S2I")])
+
+
+(define_insn "fixuns_truncdfdi2"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (unsigned_fix:DI (match_operand:DF 1 "register_operand" "f")))]
+ "TARGET_HARD_FLOAT && TARGET_64BIT"
+ "fcvt.lu.d %0,%1,rtz"
+ [(set_attr "type" "fcvt")
+ (set_attr "mode" "DF")
+ (set_attr "cnv_mode" "D2I")])
+
+
+(define_insn "fixuns_truncsfdi2"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (unsigned_fix:DI (match_operand:SF 1 "register_operand" "f")))]
+ "TARGET_HARD_FLOAT && TARGET_64BIT"
+ "fcvt.lu.s %0,%1,rtz"
+ [(set_attr "type" "fcvt")
+ (set_attr "mode" "SF")
+ (set_attr "cnv_mode" "S2I")])
+
+;;
+;; ....................
+;;
+;; DATA MOVEMENT
+;;
+;; ....................
+
+;; Lower-level instructions for loading an address from the GOT.
+;; We could use MEMs, but an unspec gives more optimization
+;; opportunities.
+
+(define_insn "got_load<mode>"
+ [(set (match_operand:P 0 "register_operand" "=r")
+ (unspec:P [(match_operand:P 1 "symbolic_operand" "")]
+ UNSPEC_LOAD_GOT))]
+ "flag_pic"
+ "la\t%0,%1"
+ [(set_attr "got" "load")
+ (set_attr "mode" "<MODE>")])
+
+(define_insn "tls_add_tp_le<mode>"
+ [(set (match_operand:P 0 "register_operand" "=r")
+ (unspec:P [(match_operand:P 1 "register_operand" "r")
+ (match_operand:P 2 "register_operand" "r")
+ (match_operand:P 3 "symbolic_operand" "")]
+ UNSPEC_TLS_LE))]
+ "!flag_pic || flag_pie"
+ "add\t%0,%1,%2,%%tprel_add(%3)"
+ [(set_attr "type" "arith")
+ (set_attr "mode" "<MODE>")])
+
+(define_insn "got_load_tls_gd<mode>"
+ [(set (match_operand:P 0 "register_operand" "=r")
+ (unspec:P [(match_operand:P 1 "symbolic_operand" "")]
+ UNSPEC_TLS_GD))]
+ "flag_pic"
+ "la.tls.gd\t%0,%1"
+ [(set_attr "got" "load")
+ (set_attr "mode" "<MODE>")])
+
+(define_insn "got_load_tls_ie<mode>"
+ [(set (match_operand:P 0 "register_operand" "=r")
+ (unspec:P [(match_operand:P 1 "symbolic_operand" "")]
+ UNSPEC_TLS_IE))]
+ "flag_pic"
+ "la.tls.ie\t%0,%1"
+ [(set_attr "got" "load")
+ (set_attr "mode" "<MODE>")])
+
+;; Instructions for adding the low 16 bits of an address to a register.
+;; Operand 2 is the address: riscv_print_operand works out which relocation
+;; should be applied.
+
+(define_insn "*low<mode>"
+ [(set (match_operand:P 0 "register_operand" "=r")
+ (lo_sum:P (match_operand:P 1 "register_operand" "r")
+ (match_operand:P 2 "immediate_operand" "")))]
+ ""
+ "add\t%0,%1,%R2"
+ [(set_attr "alu_type" "add")
+ (set_attr "mode" "<MODE>")])
+
+;; Allow combine to split complex const_int load sequences, using operand 2
+;; to store the intermediate results. See move_operand for details.
+(define_split
+ [(set (match_operand:GPR 0 "register_operand")
+ (match_operand:GPR 1 "splittable_const_int_operand"))
+ (clobber (match_operand:GPR 2 "register_operand"))]
+ ""
+ [(const_int 0)]
+{
+ riscv_move_integer (operands[2], operands[0], INTVAL (operands[1]));
+ DONE;
+})
+
+;; Likewise, for symbolic operands.
+(define_split
+ [(set (match_operand:P 0 "register_operand")
+ (match_operand:P 1))
+ (clobber (match_operand:P 2 "register_operand"))]
+ "riscv_split_symbol (operands[2], operands[1], MAX_MACHINE_MODE, NULL)"
+ [(set (match_dup 0) (match_dup 3))]
+{
+ riscv_split_symbol (operands[2], operands[1],
+ MAX_MACHINE_MODE, &operands[3]);
+})
+
+;; 64-bit integer moves
+
+;; Unlike most other insns, the move insns can't be split with '
+;; different predicates, because register spilling and other parts of
+;; the compiler, have memoized the insn number already.
+
+(define_expand "movdi"
+ [(set (match_operand:DI 0 "")
+ (match_operand:DI 1 ""))]
+ ""
+{
+ if (riscv_legitimize_move (DImode, operands[0], operands[1]))
+ DONE;
+})
+
+(define_insn "*movdi_32bit"
+ [(set (match_operand:DI 0 "nonimmediate_operand" "=r,r,r,m,*f,*f,*r,*m")
+ (match_operand:DI 1 "move_operand" "r,i,m,r,*J*r,*m,*f,*f"))]
+ "!TARGET_64BIT
+ && (register_operand (operands[0], DImode)
+ || reg_or_0_operand (operands[1], DImode))"
+ { return riscv_output_move (operands[0], operands[1]); }
+ [(set_attr "move_type" "move,const,load,store,mtc,fpload,mfc,fpstore")
+ (set_attr "mode" "DI")])
+
+(define_insn "*movdi_64bit"
+ [(set (match_operand:DI 0 "nonimmediate_operand" "=r,r,r,m,*f,*f,*r,*m")
+ (match_operand:DI 1 "move_operand" "r,T,m,rJ,*r*J,*m,*f,*f"))]
+ "TARGET_64BIT
+ && (register_operand (operands[0], DImode)
+ || reg_or_0_operand (operands[1], DImode))"
+ { return riscv_output_move (operands[0], operands[1]); }
+ [(set_attr "move_type" "move,const,load,store,mtc,fpload,mfc,fpstore")
+ (set_attr "mode" "DI")])
+
+;; 32-bit Integer moves
+
+;; Unlike most other insns, the move insns can't be split with
+;; different predicates, because register spilling and other parts of
+;; the compiler, have memoized the insn number already.
+
+(define_expand "mov<mode>"
+ [(set (match_operand:IMOVE32 0 "")
+ (match_operand:IMOVE32 1 ""))]
+ ""
+{
+ if (riscv_legitimize_move (<MODE>mode, operands[0], operands[1]))
+ DONE;
+})
+
+(define_insn "*mov<mode>_internal"
+ [(set (match_operand:IMOVE32 0 "nonimmediate_operand" "=r,r,r,m,*f,*f,*r,*m")
+ (match_operand:IMOVE32 1 "move_operand" "r,T,m,rJ,*r*J,*m,*f,*f"))]
+ "(register_operand (operands[0], <MODE>mode)
+ || reg_or_0_operand (operands[1], <MODE>mode))"
+ { return riscv_output_move (operands[0], operands[1]); }
+ [(set_attr "move_type" "move,const,load,store,mtc,fpload,mfc,fpstore")
+ (set_attr "mode" "SI")])
+
+;; 16-bit Integer moves
+
+;; Unlike most other insns, the move insns can't be split with
+;; different predicates, because register spilling and other parts of
+;; the compiler, have memoized the insn number already.
+;; Unsigned loads are used because LOAD_EXTEND_OP returns ZERO_EXTEND.
+
+(define_expand "movhi"
+ [(set (match_operand:HI 0 "")
+ (match_operand:HI 1 ""))]
+ ""
+{
+ if (riscv_legitimize_move (HImode, operands[0], operands[1]))
+ DONE;
+})
+
+(define_insn "*movhi_internal"
+ [(set (match_operand:HI 0 "nonimmediate_operand" "=r,r,r,m,*f,*r")
+ (match_operand:HI 1 "move_operand" "r,T,m,rJ,*r*J,*f"))]
+ "(register_operand (operands[0], HImode)
+ || reg_or_0_operand (operands[1], HImode))"
+ { return riscv_output_move (operands[0], operands[1]); }
+ [(set_attr "move_type" "move,const,load,store,mtc,mfc")
+ (set_attr "mode" "HI")])
+
+;; HImode constant generation; see riscv_move_integer for details.
+;; si+si->hi without truncation is legal because of TRULY_NOOP_TRUNCATION.
+
+(define_insn "add<mode>hi3"
+ [(set (match_operand:HI 0 "register_operand" "=r,r")
+ (plus:HI (match_operand:HISI 1 "register_operand" "r,r")
+ (match_operand:HISI 2 "arith_operand" "r,Q")))]
+ ""
+ { return TARGET_64BIT ? "addw\t%0,%1,%2" : "add\t%0,%1,%2"; }
+ [(set_attr "type" "arith")
+ (set_attr "mode" "HI")])
+
+(define_insn "xor<mode>hi3"
+ [(set (match_operand:HI 0 "register_operand" "=r,r")
+ (xor:HI (match_operand:HISI 1 "register_operand" "r,r")
+ (match_operand:HISI 2 "arith_operand" "r,Q")))]
+ ""
+ "xor\t%0,%1,%2"
+ [(set_attr "type" "logical")
+ (set_attr "mode" "HI")])
+
+;; 8-bit Integer moves
+
+(define_expand "movqi"
+ [(set (match_operand:QI 0 "")
+ (match_operand:QI 1 ""))]
+ ""
+{
+ if (riscv_legitimize_move (QImode, operands[0], operands[1]))
+ DONE;
+})
+
+(define_insn "*movqi_internal"
+ [(set (match_operand:QI 0 "nonimmediate_operand" "=r,r,r,m,*f,*r")
+ (match_operand:QI 1 "move_operand" "r,I,m,rJ,*r*J,*f"))]
+ "(register_operand (operands[0], QImode)
+ || reg_or_0_operand (operands[1], QImode))"
+ { return riscv_output_move (operands[0], operands[1]); }
+ [(set_attr "move_type" "move,const,load,store,mtc,mfc")
+ (set_attr "mode" "QI")])
+
+;; 32-bit floating point moves
+
+(define_expand "movsf"
+ [(set (match_operand:SF 0 "")
+ (match_operand:SF 1 ""))]
+ ""
+{
+ if (riscv_legitimize_move (SFmode, operands[0], operands[1]))
+ DONE;
+})
+
+(define_insn "*movsf_hardfloat"
+ [(set (match_operand:SF 0 "nonimmediate_operand" "=f,f,f,m,m,*f,*r,*r,*r,*m")
+ (match_operand:SF 1 "move_operand" "f,G,m,f,G,*r,*f,*G*r,*m,*r"))]
+ "TARGET_HARD_FLOAT
+ && (register_operand (operands[0], SFmode)
+ || reg_or_0_operand (operands[1], SFmode))"
+ { return riscv_output_move (operands[0], operands[1]); }
+ [(set_attr "move_type" "fmove,mtc,fpload,fpstore,store,mtc,mfc,move,load,store")
+ (set_attr "mode" "SF")])
+
+(define_insn "*movsf_softfloat"
+ [(set (match_operand:SF 0 "nonimmediate_operand" "=r,r,m")
+ (match_operand:SF 1 "move_operand" "Gr,m,r"))]
+ "TARGET_SOFT_FLOAT
+ && (register_operand (operands[0], SFmode)
+ || reg_or_0_operand (operands[1], SFmode))"
+ { return riscv_output_move (operands[0], operands[1]); }
+ [(set_attr "move_type" "move,load,store")
+ (set_attr "mode" "SF")])
+
+;; 64-bit floating point moves
+
+(define_expand "movdf"
+ [(set (match_operand:DF 0 "")
+ (match_operand:DF 1 ""))]
+ ""
+{
+ if (riscv_legitimize_move (DFmode, operands[0], operands[1]))
+ DONE;
+})
+
+;; In RV32, we lack mtf.d/mff.d. Go through memory instead.
+;; (except for moving a constant 0 to an FPR. for that we use fcvt.d.w.)
+(define_insn "*movdf_hardfloat_rv32"
+ [(set (match_operand:DF 0 "nonimmediate_operand" "=f,f,f,m,m,*r,*r,*m")
+ (match_operand:DF 1 "move_operand" "f,G,m,f,G,*r*G,*m,*r"))]
+ "!TARGET_64BIT && TARGET_HARD_FLOAT
+ && (register_operand (operands[0], DFmode)
+ || reg_or_0_operand (operands[1], DFmode))"
+ { return riscv_output_move (operands[0], operands[1]); }
+ [(set_attr "move_type" "fmove,mtc,fpload,fpstore,store,move,load,store")
+ (set_attr "mode" "DF")])
+
+(define_insn "*movdf_hardfloat_rv64"
+ [(set (match_operand:DF 0 "nonimmediate_operand" "=f,f,f,m,m,*f,*r,*r,*r,*m")
+ (match_operand:DF 1 "move_operand" "f,G,m,f,G,*r,*f,*r*G,*m,*r"))]
+ "TARGET_64BIT && TARGET_HARD_FLOAT
+ && (register_operand (operands[0], DFmode)
+ || reg_or_0_operand (operands[1], DFmode))"
+ { return riscv_output_move (operands[0], operands[1]); }
+ [(set_attr "move_type" "fmove,mtc,fpload,fpstore,store,mtc,mfc,move,load,store")
+ (set_attr "mode" "DF")])
+
+(define_insn "*movdf_softfloat"
+ [(set (match_operand:DF 0 "nonimmediate_operand" "=r,r,m")
+ (match_operand:DF 1 "move_operand" "rG,m,rG"))]
+ "TARGET_SOFT_FLOAT
+ && (register_operand (operands[0], DFmode)
+ || reg_or_0_operand (operands[1], DFmode))"
+ { return riscv_output_move (operands[0], operands[1]); }
+ [(set_attr "move_type" "move,load,store")
+ (set_attr "mode" "DF")])
+
+;; 128-bit integer moves
+
+(define_expand "movti"
+ [(set (match_operand:TI 0)
+ (match_operand:TI 1))]
+ "TARGET_64BIT"
+{
+ if (riscv_legitimize_move (TImode, operands[0], operands[1]))
+ DONE;
+})
+
+(define_insn "*movti"
+ [(set (match_operand:TI 0 "nonimmediate_operand" "=r,r,r,m")
+ (match_operand:TI 1 "move_operand" "r,i,m,rJ"))]
+ "TARGET_64BIT
+ && (register_operand (operands[0], TImode)
+ || reg_or_0_operand (operands[1], TImode))"
+ "#"
+ [(set_attr "move_type" "move,const,load,store")
+ (set_attr "mode" "TI")])
+
+(define_split
+ [(set (match_operand:MOVE64 0 "nonimmediate_operand")
+ (match_operand:MOVE64 1 "move_operand"))]
+ "reload_completed && !TARGET_64BIT
+ && riscv_split_64bit_move_p (operands[0], operands[1])"
+ [(const_int 0)]
+{
+ riscv_split_doubleword_move (operands[0], operands[1]);
+ DONE;
+})
+
+(define_split
+ [(set (match_operand:MOVE128 0 "nonimmediate_operand")
+ (match_operand:MOVE128 1 "move_operand"))]
+ "TARGET_64BIT && reload_completed"
+ [(const_int 0)]
+{
+ riscv_split_doubleword_move (operands[0], operands[1]);
+ DONE;
+})
+
+;; 64-bit paired-single floating point moves
+
+;; Load the low word of operand 0 with operand 1.
+(define_insn "load_low<mode>"
+ [(set (match_operand:SPLITF 0 "register_operand" "=f,f")
+ (unspec:SPLITF [(match_operand:<HALFMODE> 1 "general_operand" "rJ,m")]
+ UNSPEC_LOAD_LOW))]
+ "TARGET_HARD_FLOAT"
+{
+ operands[0] = riscv_subword (operands[0], 0);
+ return riscv_output_move (operands[0], operands[1]);
+}
+ [(set_attr "move_type" "mtc,fpload")
+ (set_attr "mode" "<HALFMODE>")])
+
+;; Load the high word of operand 0 from operand 1, preserving the value
+;; in the low word.
+(define_insn "load_high<mode>"
+ [(set (match_operand:SPLITF 0 "register_operand" "=f,f")
+ (unspec:SPLITF [(match_operand:<HALFMODE> 1 "general_operand" "rJ,m")
+ (match_operand:SPLITF 2 "register_operand" "0,0")]
+ UNSPEC_LOAD_HIGH))]
+ "TARGET_HARD_FLOAT"
+{
+ operands[0] = riscv_subword (operands[0], 1);
+ return riscv_output_move (operands[0], operands[1]);
+}
+ [(set_attr "move_type" "mtc,fpload")
+ (set_attr "mode" "<HALFMODE>")])
+
+;; Store one word of operand 1 in operand 0. Operand 2 is 1 to store the
+;; high word and 0 to store the low word.
+(define_insn "store_word<mode>"
+ [(set (match_operand:<HALFMODE> 0 "nonimmediate_operand" "=r,m")
+ (unspec:<HALFMODE> [(match_operand:SPLITF 1 "register_operand" "f,f")
+ (match_operand 2 "const_int_operand")]
+ UNSPEC_STORE_WORD))]
+ "TARGET_HARD_FLOAT"
+{
+ operands[1] = riscv_subword (operands[1], INTVAL (operands[2]));
+ return riscv_output_move (operands[0], operands[1]);
+}
+ [(set_attr "move_type" "mfc,fpstore")
+ (set_attr "mode" "<HALFMODE>")])
+
+;; Expand in-line code to clear the instruction cache between operand[0] and
+;; operand[1].
+(define_expand "clear_cache"
+ [(match_operand 0 "pmode_register_operand")
+ (match_operand 1 "pmode_register_operand")]
+ ""
+ "
+{
+ emit_insn(gen_fence_i());
+ DONE;
+}")
+
+(define_insn "fence"
+ [(unspec_volatile [(const_int 0)] UNSPEC_FENCE)]
+ ""
+ "%|fence%-")
+
+(define_insn "fence_i"
+ [(unspec_volatile [(const_int 0)] UNSPEC_FENCE_I)]
+ ""
+ "fence.i")
+
+;; Block moves, see riscv.c for more details.
+;; Argument 0 is the destination
+;; Argument 1 is the source
+;; Argument 2 is the length
+;; Argument 3 is the alignment
+
+(define_expand "movmemsi"
+ [(parallel [(set (match_operand:BLK 0 "general_operand")
+ (match_operand:BLK 1 "general_operand"))
+ (use (match_operand:SI 2 ""))
+ (use (match_operand:SI 3 "const_int_operand"))])]
+ "!TARGET_MEMCPY"
+{
+ if (riscv_expand_block_move (operands[0], operands[1], operands[2]))
+ DONE;
+ else
+ FAIL;
+})
+
+;;
+;; ....................
+;;
+;; SHIFTS
+;;
+;; ....................
+
+(define_insn "<optab>si3"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (any_shift:SI (match_operand:SI 1 "register_operand" "r")
+ (match_operand:SI 2 "arith_operand" "rI")))]
+ ""
+{
+ if (GET_CODE (operands[2]) == CONST_INT)
+ operands[2] = GEN_INT (INTVAL (operands[2])
+ & (GET_MODE_BITSIZE (SImode) - 1));
+
+ return TARGET_64BIT ? "<insn>w\t%0,%1,%2" : "<insn>\t%0,%1,%2";
+}
+ [(set_attr "type" "shift")
+ (set_attr "mode" "SI")])
+
+(define_insn "*<optab>disi3"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (any_shift:SI (truncate:SI (match_operand:DI 1 "register_operand" "r"))
+ (truncate:SI (match_operand:DI 2 "arith_operand" "rI"))))]
+ "TARGET_64BIT"
+ "<insn>w\t%0,%1,%2"
+ [(set_attr "type" "shift")
+ (set_attr "mode" "SI")])
+
+(define_insn "*ashldi3_truncsi"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (truncate:SI
+ (ashift:DI (match_operand:DI 1 "register_operand" "r")
+ (match_operand:DI 2 "const_arith_operand" "I"))))]
+ "TARGET_64BIT && INTVAL (operands[2]) < 32"
+ "sllw\t%0,%1,%2"
+ [(set_attr "type" "shift")
+ (set_attr "mode" "SI")])
+
+(define_insn "*ashldisi3"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (ashift:SI (match_operand:GPR 1 "register_operand" "r")
+ (match_operand:GPR2 2 "arith_operand" "rI")))]
+ "TARGET_64BIT && (GET_CODE (operands[2]) == CONST_INT ? INTVAL (operands[2]) < 32 : 1)"
+ "sllw\t%0,%1,%2"
+ [(set_attr "type" "shift")
+ (set_attr "mode" "SI")])
+
+(define_insn "<optab>di3"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (any_shift:DI (match_operand:DI 1 "register_operand" "r")
+ (match_operand:DI 2 "arith_operand" "rI")))]
+ "TARGET_64BIT"
+{
+ if (GET_CODE (operands[2]) == CONST_INT)
+ operands[2] = GEN_INT (INTVAL (operands[2])
+ & (GET_MODE_BITSIZE (DImode) - 1));
+
+ return "<insn>\t%0,%1,%2";
+}
+ [(set_attr "type" "shift")
+ (set_attr "mode" "DI")])
+
+(define_insn "<optab>si3_extend"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (sign_extend:DI
+ (any_shift:SI (match_operand:SI 1 "register_operand" "r")
+ (match_operand:SI 2 "arith_operand" "rI"))))]
+ "TARGET_64BIT"
+{
+ if (GET_CODE (operands[2]) == CONST_INT)
+ operands[2] = GEN_INT (INTVAL (operands[2]) & 0x1f);
+
+ return "<insn>w\t%0,%1,%2";
+}
+ [(set_attr "type" "shift")
+ (set_attr "mode" "SI")])
+
+;;
+;; ....................
+;;
+;; CONDITIONAL BRANCHES
+;;
+;; ....................
+
+;; Conditional branches
+
+(define_insn "*branch_order<mode>"
+ [(set (pc)
+ (if_then_else
+ (match_operator 1 "order_operator"
+ [(match_operand:GPR 2 "register_operand" "r")
+ (match_operand:GPR 3 "reg_or_0_operand" "rJ")])
+ (label_ref (match_operand 0 "" ""))
+ (pc)))]
+ ""
+{
+ if (GET_CODE (operands[3]) == CONST_INT)
+ return "b%C1z\t%2,%0";
+ return "b%C1\t%2,%3,%0";
+}
+ [(set_attr "type" "branch")
+ (set_attr "mode" "none")])
+
+;; Used to implement built-in functions.
+(define_expand "condjump"
+ [(set (pc)
+ (if_then_else (match_operand 0)
+ (label_ref (match_operand 1))
+ (pc)))])
+
+(define_expand "cbranch<mode>4"
+ [(set (pc)
+ (if_then_else (match_operator 0 "comparison_operator"
+ [(match_operand:GPR 1 "register_operand")
+ (match_operand:GPR 2 "nonmemory_operand")])
+ (label_ref (match_operand 3 ""))
+ (pc)))]
+ ""
+{
+ riscv_expand_conditional_branch (operands);
+ DONE;
+})
+
+(define_expand "cbranch<mode>4"
+ [(set (pc)
+ (if_then_else (match_operator 0 "comparison_operator"
+ [(match_operand:SCALARF 1 "register_operand")
+ (match_operand:SCALARF 2 "register_operand")])
+ (label_ref (match_operand 3 ""))
+ (pc)))]
+ ""
+{
+ riscv_expand_conditional_branch (operands);
+ DONE;
+})
+
+(define_insn_and_split "*branch_on_bit<GPR:mode>"
+ [(set (pc)
+ (if_then_else
+ (match_operator 0 "equality_operator"
+ [(zero_extract:GPR (match_operand:GPR 2 "register_operand" "r")
+ (const_int 1)
+ (match_operand 3 "branch_on_bit_operand"))
+ (const_int 0)])
+ (label_ref (match_operand 1))
+ (pc)))
+ (clobber (match_scratch:GPR 4 "=&r"))]
+ ""
+ "#"
+ "reload_completed"
+ [(set (match_dup 4)
+ (ashift:GPR (match_dup 2) (match_dup 3)))
+ (set (pc)
+ (if_then_else
+ (match_op_dup 0 [(match_dup 4) (const_int 0)])
+ (label_ref (match_operand 1))
+ (pc)))]
+{
+ int shift = GET_MODE_BITSIZE (<MODE>mode) - 1 - INTVAL (operands[3]);
+ operands[3] = GEN_INT (shift);
+
+ if (GET_CODE (operands[0]) == EQ)
+ operands[0] = gen_rtx_GE (<MODE>mode, operands[4], const0_rtx);
+ else
+ operands[0] = gen_rtx_LT (<MODE>mode, operands[4], const0_rtx);
+})
+
+(define_insn_and_split "*branch_on_bit_range<GPR:mode>"
+ [(set (pc)
+ (if_then_else
+ (match_operator 0 "equality_operator"
+ [(zero_extract:GPR (match_operand:GPR 2 "register_operand" "r")
+ (match_operand 3 "branch_on_bit_operand")
+ (const_int 0))
+ (const_int 0)])
+ (label_ref (match_operand 1))
+ (pc)))
+ (clobber (match_scratch:GPR 4 "=&r"))]
+ ""
+ "#"
+ "reload_completed"
+ [(set (match_dup 4)
+ (ashift:GPR (match_dup 2) (match_dup 3)))
+ (set (pc)
+ (if_then_else
+ (match_op_dup 0 [(match_dup 4) (const_int 0)])
+ (label_ref (match_operand 1))
+ (pc)))]
+{
+ operands[3] = GEN_INT (GET_MODE_BITSIZE (<MODE>mode) - INTVAL (operands[3]));
+})
+
+;;
+;; ....................
+;;
+;; SETTING A REGISTER FROM A COMPARISON
+;;
+;; ....................
+
+;; Destination is always set in SI mode.
+
+(define_expand "cstore<mode>4"
+ [(set (match_operand:SI 0 "register_operand")
+ (match_operator:SI 1 "order_operator"
+ [(match_operand:GPR 2 "register_operand")
+ (match_operand:GPR 3 "nonmemory_operand")]))]
+ ""
+{
+ riscv_expand_scc (operands);
+ DONE;
+})
+
+(define_insn "cstore<mode>4"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (match_operator:SI 1 "fp_order_operator"
+ [(match_operand:SCALARF 2 "register_operand" "f")
+ (match_operand:SCALARF 3 "register_operand" "f")]))]
+ "TARGET_HARD_FLOAT"
+ "f%C1.<fmt>\t%0,%2,%3"
+ [(set_attr "type" "fcmp")
+ (set_attr "mode" "<UNITMODE>")])
+
+(define_insn "*seq_zero_<GPR:mode><GPR2:mode>"
+ [(set (match_operand:GPR2 0 "register_operand" "=r")
+ (eq:GPR2 (match_operand:GPR 1 "register_operand" "r")
+ (const_int 0)))]
+ ""
+ "seqz\t%0,%1"
+ [(set_attr "type" "slt")
+ (set_attr "mode" "<GPR:MODE>")])
+
+(define_insn "*sne_zero_<GPR:mode><GPR2:mode>"
+ [(set (match_operand:GPR2 0 "register_operand" "=r")
+ (ne:GPR2 (match_operand:GPR 1 "register_operand" "r")
+ (const_int 0)))]
+ ""
+ "snez\t%0,%1"
+ [(set_attr "type" "slt")
+ (set_attr "mode" "<GPR:MODE>")])
+
+(define_insn "*sgt<u>_<GPR:mode><GPR2:mode>"
+ [(set (match_operand:GPR2 0 "register_operand" "=r")
+ (any_gt:GPR2 (match_operand:GPR 1 "register_operand" "r")
+ (match_operand:GPR 2 "reg_or_0_operand" "rJ")))]
+ ""
+ "slt<u>\t%0,%z2,%1"
+ [(set_attr "type" "slt")
+ (set_attr "mode" "<GPR:MODE>")])
+
+(define_insn "*sge<u>_<GPR:mode><GPR2:mode>"
+ [(set (match_operand:GPR2 0 "register_operand" "=r")
+ (any_ge:GPR2 (match_operand:GPR 1 "register_operand" "r")
+ (const_int 1)))]
+ ""
+ "slt<u>\t%0,zero,%1"
+ [(set_attr "type" "slt")
+ (set_attr "mode" "<GPR:MODE>")])
+
+(define_insn "*slt<u>_<GPR:mode><GPR2:mode>"
+ [(set (match_operand:GPR2 0 "register_operand" "=r")
+ (any_lt:GPR2 (match_operand:GPR 1 "register_operand" "r")
+ (match_operand:GPR 2 "arith_operand" "rI")))]
+ ""
+ "slt<u>\t%0,%1,%2"
+ [(set_attr "type" "slt")
+ (set_attr "mode" "<GPR:MODE>")])
+
+(define_insn "*sle<u>_<GPR:mode><GPR2:mode>"
+ [(set (match_operand:GPR2 0 "register_operand" "=r")
+ (any_le:GPR2 (match_operand:GPR 1 "register_operand" "r")
+ (match_operand:GPR 2 "sle_operand" "")))]
+ ""
+{
+ operands[2] = GEN_INT (INTVAL (operands[2]) + 1);
+ return "slt<u>\t%0,%1,%2";
+}
+ [(set_attr "type" "slt")
+ (set_attr "mode" "<GPR:MODE>")])
+
+;;
+;; ....................
+;;
+;; UNCONDITIONAL BRANCHES
+;;
+;; ....................
+
+;; Unconditional branches.
+
+(define_insn "jump"
+ [(set (pc)
+ (label_ref (match_operand 0 "" "")))]
+ ""
+ "j\t%l0"
+ [(set_attr "type" "jump")
+ (set_attr "mode" "none")])
+
+(define_expand "indirect_jump"
+ [(set (pc) (match_operand 0 "register_operand"))]
+ ""
+{
+ operands[0] = force_reg (Pmode, operands[0]);
+ if (Pmode == SImode)
+ emit_jump_insn (gen_indirect_jumpsi (operands[0]));
+ else
+ emit_jump_insn (gen_indirect_jumpdi (operands[0]));
+ DONE;
+})
+
+(define_insn "indirect_jump<mode>"
+ [(set (pc) (match_operand:P 0 "register_operand" "r"))]
+ ""
+ "jr\t%0"
+ [(set_attr "type" "jump")
+ (set_attr "mode" "none")])
+
+(define_expand "tablejump"
+ [(set (pc) (match_operand 0 "register_operand" ""))
+ (use (label_ref (match_operand 1 "" "")))]
+ ""
+{
+ if (CASE_VECTOR_PC_RELATIVE)
+ operands[0] = expand_simple_binop (Pmode, PLUS, operands[0],
+ gen_rtx_LABEL_REF (Pmode, operands[1]),
+ NULL_RTX, 0, OPTAB_DIRECT);
+
+ if (CASE_VECTOR_PC_RELATIVE && Pmode == DImode)
+ emit_jump_insn (gen_tablejumpdi (operands[0], operands[1]));
+ else
+ emit_jump_insn (gen_tablejumpsi (operands[0], operands[1]));
+ DONE;
+})
+
+(define_insn "tablejump<mode>"
+ [(set (pc) (match_operand:GPR 0 "register_operand" "r"))
+ (use (label_ref (match_operand 1 "" "")))]
+ ""
+ "jr\t%0"
+ [(set_attr "type" "jump")
+ (set_attr "mode" "none")])
+
+;;
+;; ....................
+;;
+;; Function prologue/epilogue
+;;
+;; ....................
+;;
+
+(define_expand "prologue"
+ [(const_int 1)]
+ ""
+{
+ riscv_expand_prologue ();
+ DONE;
+})
+
+;; Block any insns from being moved before this point, since the
+;; profiling call to mcount can use various registers that aren't
+;; saved or used to pass arguments.
+
+(define_insn "blockage"
+ [(unspec_volatile [(const_int 0)] UNSPEC_BLOCKAGE)]
+ ""
+ ""
+ [(set_attr "type" "ghost")
+ (set_attr "mode" "none")])
+
+(define_expand "epilogue"
+ [(const_int 2)]
+ ""
+{
+ riscv_expand_epilogue (false);
+ DONE;
+})
+
+(define_expand "sibcall_epilogue"
+ [(const_int 2)]
+ ""
+{
+ riscv_expand_epilogue (true);
+ DONE;
+})
+
+;; Trivial return. Make it look like a normal return insn as that
+;; allows jump optimizations to work better.
+
+(define_expand "return"
+ [(simple_return)]
+ "riscv_can_use_return_insn ()"
+ "")
+
+(define_insn "simple_return"
+ [(simple_return)]
+ ""
+ "ret"
+ [(set_attr "type" "jump")
+ (set_attr "mode" "none")])
+
+;; Normal return.
+
+(define_insn "simple_return_internal"
+ [(simple_return)
+ (use (match_operand 0 "pmode_register_operand" ""))]
+ ""
+ "jr\t%0"
+ [(set_attr "type" "jump")
+ (set_attr "mode" "none")])
+
+;; This is used in compiling the unwind routines.
+(define_expand "eh_return"
+ [(use (match_operand 0 "general_operand"))]
+ ""
+{
+ if (GET_MODE (operands[0]) != word_mode)
+ operands[0] = convert_to_mode (word_mode, operands[0], 0);
+ if (TARGET_64BIT)
+ emit_insn (gen_eh_set_lr_di (operands[0]));
+ else
+ emit_insn (gen_eh_set_lr_si (operands[0]));
+ DONE;
+})
+
+;; Clobber the return address on the stack. We can't expand this
+;; until we know where it will be put in the stack frame.
+
+(define_insn "eh_set_lr_si"
+ [(unspec [(match_operand:SI 0 "register_operand" "r")] UNSPEC_EH_RETURN)
+ (clobber (match_scratch:SI 1 "=&r"))]
+ "! TARGET_64BIT"
+ "#")
+
+(define_insn "eh_set_lr_di"
+ [(unspec [(match_operand:DI 0 "register_operand" "r")] UNSPEC_EH_RETURN)
+ (clobber (match_scratch:DI 1 "=&r"))]
+ "TARGET_64BIT"
+ "#")
+
+(define_split
+ [(unspec [(match_operand 0 "register_operand")] UNSPEC_EH_RETURN)
+ (clobber (match_scratch 1))]
+ "reload_completed"
+ [(const_int 0)]
+{
+ riscv_set_return_address (operands[0], operands[1]);
+ DONE;
+})
+
+;;
+;; ....................
+;;
+;; FUNCTION CALLS
+;;
+;; ....................
+
+;; Sibling calls. All these patterns use jump instructions.
+
+;; call_insn_operand will only accept constant
+;; addresses if a direct jump is acceptable. Since the 'S' constraint
+;; is defined in terms of call_insn_operand, the same is true of the
+;; constraints.
+
+;; When we use an indirect jump, we need a register that will be
+;; preserved by the epilogue (constraint j).
+
+(define_expand "sibcall"
+ [(parallel [(call (match_operand 0 "")
+ (match_operand 1 ""))
+ (use (match_operand 2 "")) ;; next_arg_reg
+ (use (match_operand 3 ""))])] ;; struct_value_size_rtx
+ ""
+{
+ riscv_expand_call (true, NULL_RTX, XEXP (operands[0], 0), operands[1]);
+ DONE;
+})
+
+(define_insn "sibcall_internal"
+ [(call (mem:SI (match_operand 0 "call_insn_operand" "j,S"))
+ (match_operand 1 "" ""))]
+ "SIBLING_CALL_P (insn)"
+ { return REG_P (operands[0]) ? "jr\t%0"
+ : absolute_symbolic_operand (operands[0], VOIDmode) ? "tail\t%0"
+ : "tail\t%0@"; }
+ [(set_attr "type" "call")])
+
+(define_expand "sibcall_value"
+ [(parallel [(set (match_operand 0 "")
+ (call (match_operand 1 "")
+ (match_operand 2 "")))
+ (use (match_operand 3 ""))])] ;; next_arg_reg
+ ""
+{
+ riscv_expand_call (true, operands[0], XEXP (operands[1], 0), operands[2]);
+ DONE;
+})
+
+(define_insn "sibcall_value_internal"
+ [(set (match_operand 0 "register_operand" "")
+ (call (mem:SI (match_operand 1 "call_insn_operand" "j,S"))
+ (match_operand 2 "" "")))]
+ "SIBLING_CALL_P (insn)"
+ { return REG_P (operands[1]) ? "jr\t%1"
+ : absolute_symbolic_operand (operands[1], VOIDmode) ? "tail\t%1"
+ : "tail\t%1@"; }
+ [(set_attr "type" "call")])
+
+(define_insn "sibcall_value_multiple_internal"
+ [(set (match_operand 0 "register_operand" "")
+ (call (mem:SI (match_operand 1 "call_insn_operand" "j,S"))
+ (match_operand 2 "" "")))
+ (set (match_operand 3 "register_operand" "")
+ (call (mem:SI (match_dup 1))
+ (match_dup 2)))]
+ "SIBLING_CALL_P (insn)"
+ { return REG_P (operands[1]) ? "jr\t%1"
+ : absolute_symbolic_operand (operands[1], VOIDmode) ? "tail\t%1"
+ : "tail\t%1@"; }
+ [(set_attr "type" "call")])
+
+(define_expand "call"
+ [(parallel [(call (match_operand 0 "")
+ (match_operand 1 ""))
+ (use (match_operand 2 "")) ;; next_arg_reg
+ (use (match_operand 3 ""))])] ;; struct_value_size_rtx
+ ""
+{
+ riscv_expand_call (false, NULL_RTX, XEXP (operands[0], 0), operands[1]);
+ DONE;
+})
+
+(define_insn "call_internal"
+ [(call (mem:SI (match_operand 0 "call_insn_operand" "r,S"))
+ (match_operand 1 "" ""))
+ (clobber (reg:SI RETURN_ADDR_REGNUM))]
+ ""
+ { return REG_P (operands[0]) ? "jalr\t%0"
+ : absolute_symbolic_operand (operands[0], VOIDmode) ? "call\t%0"
+ : "call\t%0@"; }
+ [(set_attr "jal" "indirect,direct")])
+
+(define_expand "call_value"
+ [(parallel [(set (match_operand 0 "")
+ (call (match_operand 1 "")
+ (match_operand 2 "")))
+ (use (match_operand 3 ""))])] ;; next_arg_reg
+ ""
+{
+ riscv_expand_call (false, operands[0], XEXP (operands[1], 0), operands[2]);
+ DONE;
+})
+
+;; See comment for call_internal.
+(define_insn "call_value_internal"
+ [(set (match_operand 0 "register_operand" "")
+ (call (mem:SI (match_operand 1 "call_insn_operand" "r,S"))
+ (match_operand 2 "" "")))
+ (clobber (reg:SI RETURN_ADDR_REGNUM))]
+ ""
+ { return REG_P (operands[1]) ? "jalr\t%1"
+ : absolute_symbolic_operand (operands[1], VOIDmode) ? "call\t%1"
+ : "call\t%1@"; }
+ [(set_attr "jal" "indirect,direct")])
+
+;; See comment for call_internal.
+(define_insn "call_value_multiple_internal"
+ [(set (match_operand 0 "register_operand" "")
+ (call (mem:SI (match_operand 1 "call_insn_operand" "r,S"))
+ (match_operand 2 "" "")))
+ (set (match_operand 3 "register_operand" "")
+ (call (mem:SI (match_dup 1))
+ (match_dup 2)))
+ (clobber (reg:SI RETURN_ADDR_REGNUM))]
+ ""
+ { return REG_P (operands[1]) ? "jalr\t%1"
+ : absolute_symbolic_operand (operands[1], VOIDmode) ? "call\t%1"
+ : "call\t%1@"; }
+ [(set_attr "jal" "indirect,direct")])
+
+;; Call subroutine returning any type.
+
+(define_expand "untyped_call"
+ [(parallel [(call (match_operand 0 "")
+ (const_int 0))
+ (match_operand 1 "")
+ (match_operand 2 "")])]
+ ""
+{
+ int i;
+
+ emit_call_insn (GEN_CALL (operands[0], const0_rtx, NULL, const0_rtx));
+
+ for (i = 0; i < XVECLEN (operands[2], 0); i++)
+ {
+ rtx set = XVECEXP (operands[2], 0, i);
+ riscv_emit_move (SET_DEST (set), SET_SRC (set));
+ }
+
+ emit_insn (gen_blockage ());
+ DONE;
+})
+
+(define_insn "nop"
+ [(const_int 0)]
+ ""
+ "nop"
+ [(set_attr "type" "nop")
+ (set_attr "mode" "none")])
+
+(define_insn "trap"
+ [(trap_if (const_int 1) (const_int 0))]
+ ""
+ "sbreak")
+
+(define_insn "gpr_save"
+ [(unspec_volatile [(match_operand 0 "const_int_operand")] UNSPEC_GPR_SAVE)
+ (clobber (reg:SI T0_REGNUM))
+ (clobber (reg:SI T1_REGNUM))]
+ ""
+ { return riscv_output_gpr_save (INTVAL (operands[0])); })
+
+(define_insn "gpr_restore"
+ [(unspec_volatile [(match_operand 0 "const_int_operand")] UNSPEC_GPR_RESTORE)]
+ ""
+ "tail\t__riscv_restore_%0")
+
+(define_insn "gpr_restore_return"
+ [(return)
+ (use (match_operand 0 "pmode_register_operand" ""))
+ (const_int 0)]
+ ""
+ "")
+
+(include "sync.md")
+(include "peephole.md")
diff -urN empty/gcc/config/riscv/riscv.opt gcc-5.2.0/gcc/config/riscv/riscv.opt
--- gcc-5.2.0/gcc/config/riscv/riscv.opt 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/gcc/config/riscv/riscv.opt 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1,87 @@
+; Options for the MIPS port of the compiler
+;
+; Copyright (C) 2005, 2007, 2008, 2010, 2011 Free Software Foundation, Inc.
+;
+; This file is part of GCC.
+;
+; GCC is free software; you can redistribute it and/or modify it under
+; the terms of the GNU General Public License as published by the Free
+; Software Foundation; either version 3, or (at your option) any later
+; version.
+;
+; GCC is distributed in the hope that it will be useful, but WITHOUT
+; ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+; or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+; License for more details.
+;
+; You should have received a copy of the GNU General Public License
+; along with GCC; see the file COPYING3. If not see
+; <http://www.gnu.org/licenses/>.
+
+m32
+Target RejectNegative Mask(32BIT)
+Generate RV32 code
+
+m64
+Target RejectNegative InverseMask(32BIT, 64BIT)
+Generate RV64 code
+
+mbranch-cost=
+Target RejectNegative Joined UInteger Var(riscv_branch_cost)
+-mbranch-cost=COST Set the cost of branches to roughly COST instructions
+
+mhard-float
+Target Report RejectNegative InverseMask(SOFT_FLOAT_ABI, HARD_FLOAT_ABI)
+Allow the use of hardware floating-point ABI and instructions
+
+mmemcpy
+Target Report Mask(MEMCPY)
+Don't optimize block moves
+
+mplt
+Target Report Var(TARGET_PLT) Init(1)
+When generating -fpic code, allow the use of PLTs. Ignored for fno-pic.
+
+msoft-float
+Target Report RejectNegative Mask(SOFT_FLOAT_ABI)
+Prevent the use of all hardware floating-point instructions
+
+mfdiv
+Target Report RejectNegative Mask(FDIV)
+Use hardware floating-point divide and square root instructions
+
+march=
+Target RejectNegative Joined Var(riscv_arch_string)
+-march= Generate code for given RISC-V ISA (e.g. RV64IM)
+
+mtune=
+Target RejectNegative Joined Var(riscv_tune_string)
+-mtune=PROCESSOR Optimize the output for PROCESSOR
+
+msmall-data-limit=
+Target Joined Separate UInteger Var(g_switch_value) Init(8)
+-msmall-data-limit=<number> Put global and static data smaller than <number> bytes into a special section (on some targets)
+
+matomic
+Target Report Mask(ATOMIC)
+Use hardware atomic memory instructions.
+
+mmuldiv
+Target Report Mask(MULDIV)
+Use hardware instructions for integer multiplication and division.
+
+mrvc
+Target Report Mask(RVC)
+Use compressed instruction encoding
+
+msave-restore
+Target Report Mask(SAVE_RESTORE)
+Use smaller but slower prologue and epilogue code
+
+mlra
+Target Report Var(riscv_lra_flag) Init(0) Save
+Use LRA instead of reload
+
+mcmodel=
+Target RejectNegative Joined Var(riscv_cmodel_string)
+Use given RISC-V code model (medlow or medany)
diff -urN empty/gcc/config/riscv/sync.md gcc-5.2.0/gcc/config/riscv/sync.md
--- gcc-5.2.0/gcc/config/riscv/sync.md 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/gcc/config/riscv/sync.md 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1,198 @@
+;; Machine description for RISC-V atomic operations.
+;; Copyright (C) 2011-2014 Free Software Foundation, Inc.
+;; Contributed by Andrew Waterman (waterman@cs.berkeley.edu) at UC Berkeley.
+;; Based on MIPS target for GNU compiler.
+
+;; This file is part of GCC.
+
+;; GCC is free software; you can redistribute it and/or modify
+;; it under the terms of the GNU General Public License as published by
+;; the Free Software Foundation; either version 3, or (at your option)
+;; any later version.
+
+;; GCC is distributed in the hope that it will be useful,
+;; but WITHOUT ANY WARRANTY; without even the implied warranty of
+;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+;; GNU General Public License for more details.
+
+;; You should have received a copy of the GNU General Public License
+;; along with GCC; see the file COPYING3. If not see
+;; <http://www.gnu.org/licenses/>.
+
+(define_c_enum "unspec" [
+ UNSPEC_COMPARE_AND_SWAP
+ UNSPEC_SYNC_OLD_OP
+ UNSPEC_SYNC_EXCHANGE
+ UNSPEC_ATOMIC_STORE
+ UNSPEC_MEMORY_BARRIER
+])
+
+(define_code_iterator any_atomic [plus ior xor and])
+(define_code_attr atomic_optab
+ [(plus "add") (ior "or") (xor "xor") (and "and")])
+
+;; Memory barriers.
+
+(define_expand "mem_thread_fence"
+ [(match_operand:SI 0 "const_int_operand" "")] ;; model
+ ""
+{
+ if (INTVAL (operands[0]) != MEMMODEL_RELAXED)
+ {
+ rtx mem = gen_rtx_MEM (BLKmode, gen_rtx_SCRATCH (Pmode));
+ MEM_VOLATILE_P (mem) = 1;
+ emit_insn (gen_mem_thread_fence_1 (mem, operands[0]));
+ }
+ DONE;
+})
+
+(define_insn "mem_thread_fence_1"
+ [(set (match_operand:BLK 0 "" "")
+ (unspec:BLK [(match_dup 0)] UNSPEC_MEMORY_BARRIER))
+ (match_operand:SI 1 "const_int_operand" "")] ;; model
+ ""
+{
+ switch (INTVAL (operands[1]))
+ {
+ case MEMMODEL_SEQ_CST:
+ case MEMMODEL_ACQ_REL:
+ return "fence rw,rw";
+ case MEMMODEL_ACQUIRE:
+ case MEMMODEL_CONSUME:
+ return "fence r,rw";
+ case MEMMODEL_RELEASE:
+ return "fence rw,w";
+ default:
+ gcc_unreachable();
+ }
+})
+
+;; Atomic memory operations.
+
+;; Implement atomic stores with amoswap. Fall back to fences for atomic loads.
+(define_insn "atomic_store<mode>"
+ [(set (match_operand:GPR 0 "memory_operand" "=A")
+ (unspec_volatile:GPR
+ [(match_operand:GPR 1 "reg_or_0_operand" "rJ")
+ (match_operand:SI 2 "const_int_operand")] ;; model
+ UNSPEC_ATOMIC_STORE))]
+ "TARGET_ATOMIC"
+ "amoswap.<amo>%A2 zero,%z1,%0")
+
+(define_insn "atomic_<atomic_optab><mode>"
+ [(set (match_operand:GPR 0 "memory_operand" "+A")
+ (unspec_volatile:GPR
+ [(any_atomic:GPR (match_dup 0)
+ (match_operand:GPR 1 "reg_or_0_operand" "rJ"))
+ (match_operand:SI 2 "const_int_operand")] ;; model
+ UNSPEC_SYNC_OLD_OP))]
+ "TARGET_ATOMIC"
+ "amo<insn>.<amo>%A2 zero,%z1,%0")
+
+(define_insn "atomic_fetch_<atomic_optab><mode>"
+ [(set (match_operand:GPR 0 "register_operand" "=&r")
+ (match_operand:GPR 1 "memory_operand" "+A"))
+ (set (match_dup 1)
+ (unspec_volatile:GPR
+ [(any_atomic:GPR (match_dup 1)
+ (match_operand:GPR 2 "reg_or_0_operand" "rJ"))
+ (match_operand:SI 3 "const_int_operand")] ;; model
+ UNSPEC_SYNC_OLD_OP))]
+ "TARGET_ATOMIC"
+ "amo<insn>.<amo>%A3 %0,%z2,%1")
+
+(define_insn "atomic_exchange<mode>"
+ [(set (match_operand:GPR 0 "register_operand" "=&r")
+ (unspec_volatile:GPR
+ [(match_operand:GPR 1 "memory_operand" "+A")
+ (match_operand:SI 3 "const_int_operand")] ;; model
+ UNSPEC_SYNC_EXCHANGE))
+ (set (match_dup 1)
+ (match_operand:GPR 2 "register_operand" "0"))]
+ "TARGET_ATOMIC"
+ "amoswap.<amo>%A3 %0,%z2,%1")
+
+(define_insn "atomic_cas_value_strong<mode>"
+ [(set (match_operand:GPR 0 "register_operand" "=&r")
+ (match_operand:GPR 1 "memory_operand" "+A"))
+ (set (match_dup 1)
+ (unspec_volatile:GPR [(match_operand:GPR 2 "reg_or_0_operand" "rJ")
+ (match_operand:GPR 3 "reg_or_0_operand" "rJ")
+ (match_operand:SI 4 "const_int_operand") ;; mod_s
+ (match_operand:SI 5 "const_int_operand")] ;; mod_f
+ UNSPEC_COMPARE_AND_SWAP))
+ (clobber (match_scratch:GPR 6 "=&r"))]
+ "TARGET_ATOMIC"
+ "1: lr.<amo>%A5 %0,%1; bne %0,%z2,1f; sc.<amo>%A4 %6,%z3,%1; bnez %6,1b; 1:"
+ [(set (attr "length") (const_int 16))])
+
+(define_expand "atomic_compare_and_swap<mode>"
+ [(match_operand:SI 0 "register_operand" "") ;; bool output
+ (match_operand:GPR 1 "register_operand" "") ;; val output
+ (match_operand:GPR 2 "memory_operand" "") ;; memory
+ (match_operand:GPR 3 "reg_or_0_operand" "") ;; expected value
+ (match_operand:GPR 4 "reg_or_0_operand" "") ;; desired value
+ (match_operand:SI 5 "const_int_operand" "") ;; is_weak
+ (match_operand:SI 6 "const_int_operand" "") ;; mod_s
+ (match_operand:SI 7 "const_int_operand" "")] ;; mod_f
+ "TARGET_ATOMIC"
+{
+ emit_insn (gen_atomic_cas_value_strong<mode> (operands[1], operands[2],
+ operands[3], operands[4],
+ operands[6], operands[7]));
+
+ rtx compare = operands[1];
+ if (operands[3] != const0_rtx)
+ {
+ rtx difference = gen_rtx_MINUS (<MODE>mode, operands[1], operands[3]);
+ compare = gen_reg_rtx (<MODE>mode);
+ emit_insn (gen_rtx_SET (VOIDmode, compare, difference));
+ }
+
+ rtx eq = gen_rtx_EQ (<MODE>mode, compare, const0_rtx);
+ rtx result = gen_reg_rtx (<MODE>mode);
+ emit_insn (gen_rtx_SET (VOIDmode, result, eq));
+ emit_insn (gen_rtx_SET (VOIDmode, operands[0], gen_lowpart (SImode, result)));
+ DONE;
+})
+
+(define_expand "atomic_test_and_set"
+ [(match_operand:QI 0 "register_operand" "") ;; bool output
+ (match_operand:QI 1 "memory_operand" "+A") ;; memory
+ (match_operand:SI 2 "const_int_operand" "")] ;; model
+ "TARGET_ATOMIC"
+{
+ /* We have no QImode atomics, so use the address LSBs to form a mask,
+ then use an aligned SImode atomic. */
+ rtx result = operands[0];
+ rtx mem = operands[1];
+ rtx model = operands[2];
+ rtx addr = force_reg (Pmode, XEXP (mem, 0));
+
+ rtx aligned_addr = gen_reg_rtx (Pmode);
+ emit_move_insn (aligned_addr, gen_rtx_AND (Pmode, addr, GEN_INT (-4)));
+
+ rtx aligned_mem = change_address (mem, SImode, aligned_addr);
+ set_mem_alias_set (aligned_mem, 0);
+
+ rtx offset = gen_reg_rtx (SImode);
+ emit_move_insn (offset, gen_rtx_AND (SImode, gen_lowpart (SImode, addr),
+ GEN_INT (3)));
+
+ rtx tmp = gen_reg_rtx (SImode);
+ emit_move_insn (tmp, GEN_INT (1));
+
+ rtx shmt = gen_reg_rtx (SImode);
+ emit_move_insn (shmt, gen_rtx_ASHIFT (SImode, offset, GEN_INT (3)));
+
+ rtx word = gen_reg_rtx (SImode);
+ emit_move_insn (word, gen_rtx_ASHIFT (SImode, tmp, shmt));
+
+ tmp = gen_reg_rtx (SImode);
+ emit_insn (gen_atomic_fetch_orsi (tmp, aligned_mem, word, model));
+
+ emit_move_insn (gen_lowpart (SImode, result),
+ gen_rtx_LSHIFTRT (SImode, tmp,
+ gen_lowpart (SImode, shmt)));
+ DONE;
+})
diff -urN empty/gcc/config/riscv/t-elf gcc-5.2.0/gcc/config/riscv/t-elf
--- gcc-5.2.0/gcc/config/riscv/t-elf 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/gcc/config/riscv/t-elf 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1,4 @@
+# Build the libraries for both hard and soft floating point
+
+MULTILIB_OPTIONS = msoft-float m64/m32 mno-atomic
+MULTILIB_DIRNAMES = soft-float 64 32 no-atomic
diff -urN empty/gcc/config/riscv/t-linux64 gcc-5.2.0/gcc/config/riscv/t-linux64
--- gcc-5.2.0/gcc/config/riscv/t-linux64 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/gcc/config/riscv/t-linux64 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1,5 @@
+# Build the libraries for both hard and soft floating point
+
+MULTILIB_OPTIONS = m64/m32 msoft-float mno-atomic
+MULTILIB_DIRNAMES = 64 32 soft-float no-atomic
+MULTILIB_OSDIRNAMES = ../lib ../lib32
diff -urN empty/libgcc/config/riscv/crti.S gcc-5.2.0/libgcc/config/riscv/crti.S
--- gcc-5.2.0/libgcc/config/riscv/crti.S 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/libgcc/config/riscv/crti.S 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1 @@
+/* crti.S is empty because .init_array/.fini_array are used exclusively. */
diff -urN empty/libgcc/config/riscv/crtn.S gcc-5.2.0/libgcc/config/riscv/crtn.S
--- gcc-5.2.0/libgcc/config/riscv/crtn.S 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/libgcc/config/riscv/crtn.S 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1 @@
+/* crtn.S is empty because .init_array/.fini_array are used exclusively. */
diff -urN empty/libgcc/config/riscv/div.S gcc-5.2.0/libgcc/config/riscv/div.S
--- gcc-5.2.0/libgcc/config/riscv/div.S 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/libgcc/config/riscv/div.S 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1,121 @@
+ .text
+ .align 2
+
+#ifndef __riscv64
+/* Our RV64 64-bit routines are equivalent to our RV32 32-bit routines. */
+# define __udivdi3 __udivsi3
+# define __umoddi3 __umodsi3
+# define __divdi3 __divsi3
+# define __moddi3 __modsi3
+#else
+ .globl __udivsi3
+__udivsi3:
+ /* Compute __udivdi3(a0 << 32, a1 << 32); cast result to uint32_t. */
+ sll a0, a0, 32
+ sll a1, a1, 32
+ move t0, ra
+ jal __udivdi3
+ sext.w a0, a0
+ jr t0
+
+ .globl __umodsi3
+__umodsi3:
+ /* Compute __udivdi3((uint32_t)a0, (uint32_t)a1); cast a1 to uint32_t. */
+ sll a0, a0, 32
+ sll a1, a1, 32
+ srl a0, a0, 32
+ srl a1, a1, 32
+ move t0, ra
+ jal __udivdi3
+ sext.w a0, a1
+ jr t0
+
+ .globl __modsi3
+ __modsi3 = __moddi3
+
+ .globl __divsi3
+__divsi3:
+ /* Check for special case of INT_MIN/-1. Otherwise, fall into __divdi3. */
+ li t0, -1
+ beq a1, t0, .L20
+#endif
+
+ .globl __divdi3
+__divdi3:
+ bltz a0, .L10
+ bltz a1, .L11
+ /* Since the quotient is positive, fall into __udivdi3. */
+
+ .globl __udivdi3
+__udivdi3:
+ mv a2, a1
+ mv a1, a0
+ li a0, -1
+ beqz a2, .L5
+ li a3, 1
+ bgeu a2, a1, .L2
+.L1:
+ blez a2, .L2
+ slli a2, a2, 1
+ slli a3, a3, 1
+ bgtu a1, a2, .L1
+.L2:
+ li a0, 0
+.L3:
+ bltu a1, a2, .L4
+ sub a1, a1, a2
+ or a0, a0, a3
+.L4:
+ srli a3, a3, 1
+ srli a2, a2, 1
+ bnez a3, .L3
+.L5:
+ ret
+
+ .globl __umoddi3
+__umoddi3:
+ /* Call __udivdi3(a0, a1), then return the remainder, which is in a1. */
+ move t0, ra
+ jal __udivdi3
+ move a0, a1
+ jr t0
+
+ /* Handle negative arguments to __divdi3. */
+.L10:
+ neg a0, a0
+ bgez a1, .L12 /* Compute __udivdi3(-a0, a1), then negate the result. */
+ neg a1, a1
+ j __divdi3 /* Compute __udivdi3(-a0, -a1). */
+.L11: /* Compute __udivdi3(a0, -a1), then negate the result. */
+ neg a1, a1
+.L12:
+ move t0, ra
+ jal __divdi3
+ neg a0, a0
+ jr t0
+
+ .globl __moddi3
+__moddi3:
+ move t0, ra
+ bltz a1, .L31
+ bltz a0, .L32
+.L30:
+ jal __udivdi3 /* The dividend is not negative. */
+ move a0, a1
+ jr t0
+.L31:
+ neg a1, a1
+ bgez a0, .L30
+.L32:
+ neg a0, a0
+ jal __udivdi3 /* The dividend is hella negative. */
+ neg a0, a1
+ jr t0
+
+#ifdef __riscv64
+ /* continuation of __divsi3 */
+.L20:
+ sll t0, t0, 31
+ bne a0, t0, __divdi3
+ ret
+#endif
diff -urN empty/libgcc/config/riscv/mul.S gcc-5.2.0/libgcc/config/riscv/mul.S
--- gcc-5.2.0/libgcc/config/riscv/mul.S 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/libgcc/config/riscv/mul.S 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1,21 @@
+ .text
+ .align 2
+
+#ifndef __riscv64
+/* Our RV64 64-bit routine is equivalent to our RV32 32-bit routine. */
+# define __muldi3 __mulsi3
+#endif
+
+ .globl __muldi3
+__muldi3:
+ mv a2, a0
+ li a0, 0
+.L1:
+ slli a3, a1, _RISCV_SZPTR-1
+ bgez a3, .L2
+ add a0, a0, a2
+.L2:
+ srli a1, a1, 1
+ slli a2, a2, 1
+ bnez a1, .L1
+ ret
diff -urN empty/libgcc/config/riscv/riscv-fp.c gcc-5.2.0/libgcc/config/riscv/riscv-fp.c
--- gcc-5.2.0/libgcc/config/riscv/riscv-fp.c 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/libgcc/config/riscv/riscv-fp.c 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1,178 @@
+/* Functions needed for soft-float on riscv-linux. Based on
+ rs6000/ppc64-fp.c with TF types removed.
+
+ Copyright (C) 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+ 2000, 2001, 2002, 2003, 2004, 2006, 2009 Free Software Foundation,
+ Inc.
+
+This file is part of GCC.
+
+GCC is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free
+Software Foundation; either version 3, or (at your option) any later
+version.
+
+GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+for more details.
+
+Under Section 7 of GPL version 3, you are granted additional
+permissions described in the GCC Runtime Library Exception, version
+3.1, as published by the Free Software Foundation.
+
+You should have received a copy of the GNU General Public License and
+a copy of the GCC Runtime Library Exception along with this program;
+see the files COPYING3 and COPYING.RUNTIME respectively. If not, see
+<http://www.gnu.org/licenses/>. */
+
+#if defined(__riscv64)
+#include "fp-bit.h"
+
+extern DItype __fixdfdi (DFtype);
+extern DItype __fixsfdi (SFtype);
+extern USItype __fixunsdfsi (DFtype);
+extern USItype __fixunssfsi (SFtype);
+extern DFtype __floatdidf (DItype);
+extern DFtype __floatundidf (UDItype);
+extern SFtype __floatdisf (DItype);
+extern SFtype __floatundisf (UDItype);
+
+static DItype local_fixunssfdi (SFtype);
+static DItype local_fixunsdfdi (DFtype);
+
+DItype
+__fixdfdi (DFtype a)
+{
+ if (a < 0)
+ return - local_fixunsdfdi (-a);
+ return local_fixunsdfdi (a);
+}
+
+DItype
+__fixsfdi (SFtype a)
+{
+ if (a < 0)
+ return - local_fixunssfdi (-a);
+ return local_fixunssfdi (a);
+}
+
+USItype
+__fixunsdfsi (DFtype a)
+{
+ if (a >= - (DFtype) (- ((SItype)(((USItype)1 << ((4 * 8) - 1)) - 1)) - 1))
+ return (SItype) (a + (- ((SItype)(((USItype)1 << ((4 * 8) - 1)) - 1)) - 1))
+ - (- ((SItype)(((USItype)1 << ((4 * 8) - 1)) - 1)) - 1);
+ return (SItype) a;
+}
+
+USItype
+__fixunssfsi (SFtype a)
+{
+ if (a >= - (SFtype) (- ((SItype)(((USItype)1 << ((4 * 8) - 1)) - 1)) - 1))
+ return (SItype) (a + (- ((SItype)(((USItype)1 << ((4 * 8) - 1)) - 1)) - 1))
+ - (- ((SItype)(((USItype)1 << ((4 * 8) - 1)) - 1)) - 1);
+ return (SItype) a;
+}
+
+DFtype
+__floatdidf (DItype u)
+{
+ DFtype d;
+
+ d = (SItype) (u >> (sizeof (SItype) * 8));
+ d *= 2.0 * (((UDItype) 1) << ((sizeof (SItype) * 8) - 1));
+ d += (USItype) (u & ((((UDItype) 1) << (sizeof (SItype) * 8)) - 1));
+
+ return d;
+}
+
+DFtype
+__floatundidf (UDItype u)
+{
+ DFtype d;
+
+ d = (USItype) (u >> (sizeof (SItype) * 8));
+ d *= 2.0 * (((UDItype) 1) << ((sizeof (SItype) * 8) - 1));
+ d += (USItype) (u & ((((UDItype) 1) << (sizeof (SItype) * 8)) - 1));
+
+ return d;
+}
+
+SFtype
+__floatdisf (DItype u)
+{
+ DFtype f;
+
+ if (53 < (sizeof (DItype) * 8)
+ && 53 > ((sizeof (DItype) * 8) - 53 + 24))
+ {
+ if (! (- ((DItype) 1 << 53) < u
+ && u < ((DItype) 1 << 53)))
+ {
+ if ((UDItype) u & (((UDItype) 1 << ((sizeof (DItype) * 8) - 53)) - 1))
+ {
+ u &= ~ (((UDItype) 1 << ((sizeof (DItype) * 8) - 53)) - 1);
+ u |= ((UDItype) 1 << ((sizeof (DItype) * 8) - 53));
+ }
+ }
+ }
+ f = (SItype) (u >> (sizeof (SItype) * 8));
+ f *= 2.0 * (((UDItype) 1) << ((sizeof (SItype) * 8) - 1));
+ f += (USItype) (u & ((((UDItype) 1) << (sizeof (SItype) * 8)) - 1));
+
+ return (SFtype) f;
+}
+
+SFtype
+__floatundisf (UDItype u)
+{
+ DFtype f;
+
+ if (53 < (sizeof (DItype) * 8)
+ && 53 > ((sizeof (DItype) * 8) - 53 + 24))
+ {
+ if (u >= ((UDItype) 1 << 53))
+ {
+ if ((UDItype) u & (((UDItype) 1 << ((sizeof (DItype) * 8) - 53)) - 1))
+ {
+ u &= ~ (((UDItype) 1 << ((sizeof (DItype) * 8) - 53)) - 1);
+ u |= ((UDItype) 1 << ((sizeof (DItype) * 8) - 53));
+ }
+ }
+ }
+ f = (USItype) (u >> (sizeof (SItype) * 8));
+ f *= 2.0 * (((UDItype) 1) << ((sizeof (SItype) * 8) - 1));
+ f += (USItype) (u & ((((UDItype) 1) << (sizeof (SItype) * 8)) - 1));
+
+ return (SFtype) f;
+}
+
+/* This version is needed to prevent recursion; fixunsdfdi in libgcc
+ calls fixdfdi, which in turn calls calls fixunsdfdi. */
+
+static DItype
+local_fixunsdfdi (DFtype a)
+{
+ USItype hi, lo;
+
+ hi = a / (((UDItype) 1) << (sizeof (SItype) * 8));
+ lo = (a - ((DFtype) hi) * (((UDItype) 1) << (sizeof (SItype) * 8)));
+ return ((UDItype) hi << (sizeof (SItype) * 8)) | lo;
+}
+
+/* This version is needed to prevent recursion; fixunssfdi in libgcc
+ calls fixsfdi, which in turn calls calls fixunssfdi. */
+
+static DItype
+local_fixunssfdi (SFtype original_a)
+{
+ DFtype a = original_a;
+ USItype hi, lo;
+
+ hi = a / (((UDItype) 1) << (sizeof (SItype) * 8));
+ lo = (a - ((DFtype) hi) * (((UDItype) 1) << (sizeof (SItype) * 8)));
+ return ((UDItype) hi << (sizeof (SItype) * 8)) | lo;
+}
+
+#endif
diff -urN empty/libgcc/config/riscv/save-restore.S gcc-5.2.0/libgcc/config/riscv/save-restore.S
--- gcc-5.2.0/libgcc/config/riscv/save-restore.S 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/libgcc/config/riscv/save-restore.S 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1,220 @@
+ .text
+
+ .globl __riscv_save_12
+ .globl __riscv_save_11
+ .globl __riscv_save_10
+ .globl __riscv_save_9
+ .globl __riscv_save_8
+ .globl __riscv_save_7
+ .globl __riscv_save_6
+ .globl __riscv_save_5
+ .globl __riscv_save_4
+ .globl __riscv_save_3
+ .globl __riscv_save_2
+ .globl __riscv_save_1
+ .globl __riscv_save_0
+
+ .globl __riscv_restore_12
+ .globl __riscv_restore_11
+ .globl __riscv_restore_10
+ .globl __riscv_restore_9
+ .globl __riscv_restore_8
+ .globl __riscv_restore_7
+ .globl __riscv_restore_6
+ .globl __riscv_restore_5
+ .globl __riscv_restore_4
+ .globl __riscv_restore_3
+ .globl __riscv_restore_2
+ .globl __riscv_restore_1
+ .globl __riscv_restore_0
+
+#ifdef __riscv64
+
+__riscv_save_12:
+ addi sp, sp, -112
+ li t1, 0
+ sd s11, 8(sp)
+ j .Ls10
+
+__riscv_save_11:
+__riscv_save_10:
+ addi sp, sp, -112
+ li t1, -16
+.Ls10:
+ sd s10, 16(sp)
+ sd s9, 24(sp)
+ j .Ls8
+
+__riscv_save_9:
+__riscv_save_8:
+ addi sp, sp, -112
+ li t1, -32
+.Ls8:
+ sd s8, 32(sp)
+ sd s7, 40(sp)
+ j .Ls6
+
+__riscv_save_7:
+__riscv_save_6:
+ addi sp, sp, -112
+ li t1, -48
+.Ls6:
+ sd s6, 48(sp)
+ sd s5, 56(sp)
+ j .Ls4
+
+__riscv_save_5:
+__riscv_save_4:
+ addi sp, sp, -112
+ li t1, -64
+.Ls4:
+ sd s4, 64(sp)
+ sd s3, 72(sp)
+ j .Ls2
+
+__riscv_save_3:
+__riscv_save_2:
+ addi sp, sp, -112
+ li t1, -80
+.Ls2:
+ sd s2, 80(sp)
+ sd s1, 88(sp)
+ sd s0, 96(sp)
+ sd ra, 104(sp)
+ sub sp, sp, t1
+ jr t0
+
+__riscv_save_1:
+__riscv_save_0:
+ addi sp, sp, -16
+ sd s0, 0(sp)
+ sd ra, 8(sp)
+ jr t0
+
+__riscv_restore_12:
+ ld s11, 8(sp)
+ addi sp, sp, 16
+
+__riscv_restore_11:
+__riscv_restore_10:
+ ld s10, 0(sp)
+ ld s9, 8(sp)
+ addi sp, sp, 16
+
+__riscv_restore_9:
+__riscv_restore_8:
+ ld s8, 0(sp)
+ ld s7, 8(sp)
+ addi sp, sp, 16
+
+__riscv_restore_7:
+__riscv_restore_6:
+ ld s6, 0(sp)
+ ld s5, 8(sp)
+ addi sp, sp, 16
+
+__riscv_restore_5:
+__riscv_restore_4:
+ ld s4, 0(sp)
+ ld s3, 8(sp)
+ addi sp, sp, 16
+
+__riscv_restore_3:
+__riscv_restore_2:
+ ld s2, 0(sp)
+ ld s1, 8(sp)
+ addi sp, sp, 16
+
+__riscv_restore_1:
+__riscv_restore_0:
+ ld s0, 0(sp)
+ ld ra, 8(sp)
+ addi sp, sp, 16
+ ret
+
+#else
+
+__riscv_save_12:
+ addi sp, sp, -64
+ li t1, 0
+ sw s11, 12(sp)
+ j .Ls10
+
+__riscv_save_11:
+__riscv_save_10:
+__riscv_save_9:
+__riscv_save_8:
+ addi sp, sp, -64
+ li t1, -16
+.Ls10:
+ sw s10, 16(sp)
+ sw s9, 20(sp)
+ sw s8, 24(sp)
+ sw s7, 28(sp)
+ j .Ls6
+
+__riscv_save_7:
+__riscv_save_6:
+__riscv_save_5:
+__riscv_save_4:
+ addi sp, sp, -64
+ li t1, -32
+.Ls6:
+ sw s6, 32(sp)
+ sw s5, 36(sp)
+ sw s4, 40(sp)
+ sw s3, 44(sp)
+ sw s2, 48(sp)
+ sw s1, 52(sp)
+ sw s0, 56(sp)
+ sw ra, 60(sp)
+ sub sp, sp, t1
+ jr t0
+
+__riscv_save_3:
+__riscv_save_2:
+__riscv_save_1:
+__riscv_save_0:
+ addi sp, sp, -16
+ sw s2, 0(sp)
+ sw s1, 4(sp)
+ sw s0, 8(sp)
+ sw ra, 12(sp)
+ jr t0
+
+__riscv_restore_12:
+ lw s11, 12(sp)
+ addi sp, sp, 16
+
+__riscv_restore_11:
+__riscv_restore_10:
+__riscv_restore_9:
+__riscv_restore_8:
+ lw s10, 0(sp)
+ lw s9, 4(sp)
+ lw s8, 8(sp)
+ lw s7, 12(sp)
+ addi sp, sp, 16
+
+__riscv_restore_7:
+__riscv_restore_6:
+__riscv_restore_5:
+__riscv_restore_4:
+ lw s6, 0(sp)
+ lw s5, 4(sp)
+ lw s4, 8(sp)
+ lw s3, 12(sp)
+ addi sp, sp, 16
+
+__riscv_restore_3:
+__riscv_restore_2:
+__riscv_restore_1:
+__riscv_restore_0:
+ lw s2, 0(sp)
+ lw s1, 4(sp)
+ lw s0, 8(sp)
+ lw ra, 12(sp)
+ addi sp, sp, 16
+ ret
+
+#endif
diff -urN empty/libgcc/config/riscv/t-dpbit gcc-5.2.0/libgcc/config/riscv/t-dpbit
--- gcc-5.2.0/libgcc/config/riscv/t-dpbit 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/libgcc/config/riscv/t-dpbit 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1,4 @@
+LIB2ADD += dp-bit.c
+
+dp-bit.c: $(srcdir)/fp-bit.c
+ cat $(srcdir)/fp-bit.c > dp-bit.c
diff -urN empty/libgcc/config/riscv/t-elf gcc-5.2.0/libgcc/config/riscv/t-elf
--- gcc-5.2.0/libgcc/config/riscv/t-elf 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/libgcc/config/riscv/t-elf 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1,4 @@
+LIB2ADD += $(srcdir)/config/riscv/riscv-fp.c \
+ $(srcdir)/config/riscv/save-restore.S \
+ $(srcdir)/config/riscv/mul.S \
+ $(srcdir)/config/riscv/div.S
diff -urN empty/libgcc/config/riscv/t-elf32 gcc-5.2.0/libgcc/config/riscv/t-elf32
--- gcc-5.2.0/libgcc/config/riscv/t-elf32 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/libgcc/config/riscv/t-elf32 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1,2 @@
+HOST_LIBGCC2_CFLAGS += -m32
+CRTSTUFF_CFLAGS += -m32
diff -urN empty/libgcc/config/riscv/t-fpbit gcc-5.2.0/libgcc/config/riscv/t-fpbit
--- gcc-5.2.0/libgcc/config/riscv/t-fpbit 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/libgcc/config/riscv/t-fpbit 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1,5 @@
+LIB2ADD += fp-bit.c
+
+fp-bit.c: $(srcdir)/fp-bit.c
+ echo '#define FLOAT' > fp-bit.c
+ cat $(srcdir)/fp-bit.c >> fp-bit.c
diff -urN empty/libgcc/config/riscv/t-tpbit gcc-5.2.0/libgcc/config/riscv/t-tpbit
--- gcc-5.2.0/libgcc/config/riscv/t-tpbit 1970-01-01 01:00:00.000000000 +0100
+++ gcc-5.2.0/libgcc/config/riscv/t-tpbit 2015-07-17 22:36:52.319705931 +0200
@@ -0,0 +1,10 @@
+LIB2ADD += tp-bit.c
+
+tp-bit.c: $(srcdir)/fp-bit.c
+ echo '#ifdef _RISCVEL' > tp-bit.c
+ echo '# define FLOAT_BIT_ORDER_MISMATCH' >> tp-bit.c
+ echo '#endif' >> tp-bit.c
+ echo '#if __LDBL_MANT_DIG__ == 113' >> tp-bit.c
+ echo '# define TFLOAT' >> tp-bit.c
+ cat $(srcdir)/fp-bit.c >> tp-bit.c
+ echo '#endif' >> tp-bit.c