211 lines
6.4 KiB
C
211 lines
6.4 KiB
C
/*
|
|
* This file is part of the libpayload project.
|
|
*
|
|
* Copyright (C) 2010 coresystems GmbH
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
//#define USB_DEBUG
|
|
|
|
#include <libpayload.h>
|
|
#include <kconfig.h>
|
|
#include "ehci.h"
|
|
#include "ehci_private.h"
|
|
|
|
typedef struct {
|
|
int n_ports;
|
|
/* typical C, n_ports is the number
|
|
* of ports, while ports[] spans [0,n_ports-1],
|
|
* even though the spec counts from 1.
|
|
*/
|
|
volatile portsc_t *ports;
|
|
int *devices;
|
|
} rh_inst_t;
|
|
|
|
#define RH_INST(dev) ((rh_inst_t*)(dev)->data)
|
|
|
|
static void
|
|
ehci_rh_destroy (usbdev_t *dev)
|
|
{
|
|
int port;
|
|
|
|
/* Tear down all devices below the root hub (in bottom-up order). */
|
|
for (port = 0; port < RH_INST(dev)->n_ports; port++) {
|
|
if (RH_INST(dev)->devices[port] != -1) {
|
|
usb_detach_device(dev->controller,
|
|
RH_INST(dev)->devices[port]);
|
|
RH_INST(dev)->devices[port] = -1;
|
|
}
|
|
}
|
|
|
|
free (RH_INST(dev)->devices);
|
|
free (RH_INST(dev));
|
|
}
|
|
|
|
static void
|
|
ehci_rh_hand_over_port (usbdev_t *dev, int port)
|
|
{
|
|
usb_debug("giving up port %x, it's USB1\n", port+1);
|
|
|
|
/* Clear ConnectStatusChange before evaluation */
|
|
/* RW/C register, so clear it by writing 1 */
|
|
RH_INST(dev)->ports[port] |= P_CONN_STATUS_CHANGE;
|
|
|
|
/* Lowspeed device. Hand over to companion */
|
|
RH_INST(dev)->ports[port] |= P_PORT_OWNER;
|
|
|
|
/* TOTEST: how long to wait? trying 100ms for now */
|
|
int timeout = 10; /* timeout after 10 * 10ms == 100ms */
|
|
while (!(RH_INST(dev)->ports[port] & P_CONN_STATUS_CHANGE) && timeout--)
|
|
mdelay(10);
|
|
if (!(RH_INST(dev)->ports[port] & P_CONN_STATUS_CHANGE)) {
|
|
usb_debug("Warning: Handing port over to companion timed out.\n");
|
|
}
|
|
|
|
/* RW/C register, so clear it by writing 1 */
|
|
RH_INST(dev)->ports[port] |= P_CONN_STATUS_CHANGE;
|
|
return;
|
|
}
|
|
|
|
static void
|
|
ehci_rh_scanport (usbdev_t *dev, int port)
|
|
{
|
|
usb_speed port_speed;
|
|
|
|
if (RH_INST(dev)->devices[port]!=-1) {
|
|
usb_debug("Unregister device at port %x\n", port+1);
|
|
usb_detach_device(dev->controller, RH_INST(dev)->devices[port]);
|
|
RH_INST(dev)->devices[port]=-1;
|
|
}
|
|
/* device connected, handle */
|
|
if (RH_INST(dev)->ports[port] & P_CURR_CONN_STATUS) {
|
|
mdelay(100); // usb20 spec 9.1.2
|
|
if (!IS_ENABLED(CONFIG_LP_USB_EHCI_HOSTPC_ROOT_HUB_TT) &&
|
|
(RH_INST(dev)->ports[port] & P_LINE_STATUS) ==
|
|
P_LINE_STATUS_LOWSPEED) {
|
|
ehci_rh_hand_over_port(dev, port);
|
|
return;
|
|
}
|
|
|
|
/* Deassert enable, assert reset. These must change
|
|
* atomically.
|
|
*/
|
|
RH_INST(dev)->ports[port] = (RH_INST(dev)->ports[port] & ~P_PORT_ENABLE) | P_PORT_RESET;
|
|
|
|
/* Wait a bit while reset is active (+1 to avoid Tegra race). */
|
|
mdelay(50 + 1); // usb20 spec 7.1.7.5 (TDRSTR)
|
|
|
|
/* Deassert reset. */
|
|
RH_INST(dev)->ports[port] &= ~P_PORT_RESET;
|
|
|
|
/* Wait max. 2ms (ehci spec 2.3.9) for flag change to finish. */
|
|
int timeout = 20; /* time out after 20 * 100us == 2ms */
|
|
while ((RH_INST(dev)->ports[port] & P_PORT_RESET) && timeout--)
|
|
udelay(100);
|
|
if (RH_INST(dev)->ports[port] & P_PORT_RESET) {
|
|
usb_debug("Error: ehci_rh: port reset timed out.\n");
|
|
return;
|
|
}
|
|
|
|
mdelay(10); /* TRSTRCY (USB 2.0 spec 7.1.7.5) */
|
|
|
|
/* If the host controller enabled the port, it's a high-speed
|
|
* device, otherwise it's full-speed.
|
|
*/
|
|
if (!(RH_INST(dev)->ports[port] & P_PORT_ENABLE)) {
|
|
ehci_rh_hand_over_port(dev, port);
|
|
return;
|
|
}
|
|
if (IS_ENABLED(CONFIG_LP_USB_EHCI_HOSTPC_ROOT_HUB_TT)) {
|
|
port_speed = (usb_speed)
|
|
((EHCI_INST(dev->controller)->operation->hostpc
|
|
>> 25) & 0x03);
|
|
} else {
|
|
usb_debug("port %x hosts a USB2 device\n", port+1);
|
|
port_speed = HIGH_SPEED;
|
|
}
|
|
RH_INST(dev)->devices[port] = usb_attach_device(dev->controller
|
|
, dev->address, port, port_speed);
|
|
}
|
|
/* RW/C register, so clear it by writing 1 */
|
|
RH_INST(dev)->ports[port] |= P_CONN_STATUS_CHANGE;
|
|
}
|
|
|
|
static int
|
|
ehci_rh_report_port_changes (usbdev_t *dev)
|
|
{
|
|
int i;
|
|
for (i=0; i<RH_INST(dev)->n_ports; i++) {
|
|
if (RH_INST(dev)->ports[i] & P_CONN_STATUS_CHANGE)
|
|
return i;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static void
|
|
ehci_rh_poll (usbdev_t *dev)
|
|
{
|
|
int port;
|
|
while ((port = ehci_rh_report_port_changes (dev)) != -1)
|
|
ehci_rh_scanport (dev, port);
|
|
}
|
|
|
|
|
|
void
|
|
ehci_rh_init (usbdev_t *dev)
|
|
{
|
|
int i;
|
|
dev->destroy = ehci_rh_destroy;
|
|
dev->poll = ehci_rh_poll;
|
|
|
|
dev->data = xmalloc(sizeof(rh_inst_t));
|
|
RH_INST(dev)->n_ports = EHCI_INST(dev->controller)->capabilities->hcsparams & HCS_NPORTS_MASK;
|
|
RH_INST(dev)->ports = EHCI_INST(dev->controller)->operation->portsc;
|
|
RH_INST(dev)->devices = xmalloc(RH_INST(dev)->n_ports * sizeof(int));
|
|
|
|
usb_debug("root hub has %x ports\n", RH_INST(dev)->n_ports);
|
|
|
|
/* If the host controller has port power control, enable power on
|
|
* all ports and wait 20ms.
|
|
*/
|
|
if (EHCI_INST(dev->controller)->capabilities->hcsparams
|
|
& HCS_PORT_POWER_CONTROL) {
|
|
usb_debug("host controller has port power control, "
|
|
"giving power to all ports.\n");
|
|
for (i=0; i < RH_INST(dev)->n_ports; i++)
|
|
RH_INST(dev)->ports[i] |= P_PP;
|
|
}
|
|
mdelay(20); // ehci spec 2.3.9
|
|
|
|
dev->speed = HIGH_SPEED;
|
|
dev->address = 0;
|
|
dev->hub = -1;
|
|
dev->port = -1;
|
|
for (i=0; i < RH_INST(dev)->n_ports; i++) {
|
|
RH_INST(dev)->devices[i] = -1;
|
|
ehci_rh_scanport(dev, i);
|
|
}
|
|
}
|