coreboot-kgpe-d16/src/mainboard/tyan/s2850/Config.lb
Carl-Daniel Hailfinger 00809ebf02 This changes the python generated makefiles
targets/*/*/Makefile
        targets/*/*/normal/Makefile
        targets/*/*/fallback/Makefile

to use a common copy of romcc, and to leave this compiler untouched by
'make clean' in targets/*/*/fallback/ and targets/*/*/normal/ .
'make clean' in targets/*/*/ will clean romcc.

Thanks to Mats for the initial idea and implementation of a tool to do
this. This patch has almost the same behaviour as the original tool
without having to run the tool each time.
Tested for abuild-friendliness.

The patch saves ~10-12 seconds for every target using romcc. For a full
abuild run, this is ~20% time saved.
For the first 38 abuild targets, total build time is down to 13m24s
instead of 16m22s on my machine.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Mats Erik Andersson <mats.andersson@gisladisker.se>
Acked-by: Stefan Reinauer <stepan@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3564 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-09-04 13:44:00 +00:00

290 lines
8.8 KiB
Text

##
## Compute the location and size of where this firmware image
## (coreboot plus bootloader) will live in the boot rom chip.
##
if USE_FALLBACK_IMAGE
default ROM_SECTION_SIZE = FALLBACK_SIZE
default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
else
default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
default ROM_SECTION_OFFSET = 0
end
##
## Compute the start location and size size of
## The coreboot bootloader.
##
default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
##
## Compute where this copy of coreboot will start in the boot rom
##
default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
##
## Compute a range of ROM that can cached to speed up coreboot,
## execution speed.
##
## XIP_ROM_SIZE must be a power of 2.
## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
##
default XIP_ROM_SIZE=65536
default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
arch i386 end
##
## Build the objects we have code for in this directory.
##
driver mainboard.o
#dir /drivers/si/3114
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
if USE_DCACHE_RAM
if CONFIG_USE_INIT
makerule ./auto.o
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o"
end
else
makerule ./auto.inc
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
action "perl -e 's/.rodata/.rom.data/g' -pi $@"
action "perl -e 's/.text/.section .rom.text/g' -pi $@"
end
end
else
##
## Romcc output
##
makerule ./failover.E
depends "$(MAINBOARD)/failover.c ../romcc"
action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
end
makerule ./failover.inc
depends "$(MAINBOARD)/failover.c ../romcc"
action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
end
makerule ./auto.E
depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
end
makerule ./auto.inc
depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
end
end
##
## Build our 16 bit and 32 bit coreboot entry code
##
if USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/entry16.inc
ldscript /cpu/x86/16bit/entry16.lds
end
mainboardinit cpu/x86/32bit/entry32.inc
if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
end
##
## Build our reset vector (This is where coreboot is entered)
##
if USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
ldscript /cpu/x86/16bit/reset16.lds
else
mainboardinit cpu/x86/32bit/reset32.inc
ldscript /cpu/x86/32bit/reset32.lds
end
if USE_DCACHE_RAM
else
### Should this be in the northbridge code?
mainboardinit arch/i386/lib/cpu_reset.inc
end
##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
end
###
### This is the early phase of coreboot startup
### Things are delicate and we test to see if we should
### failover to another image.
###
if USE_FALLBACK_IMAGE
if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
else
ldscript /arch/i386/lib/failover.lds
mainboardinit ./failover.inc
end
end
###
### O.k. We aren't just an intermediary anymore!
###
##
## Setup RAM
##
if USE_DCACHE_RAM
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
else
##
## Setup RAM
##
mainboardinit cpu/x86/fpu/enable_fpu.inc
mainboardinit cpu/x86/mmx/enable_mmx.inc
mainboardinit cpu/x86/sse/enable_sse.inc
mainboardinit ./auto.inc
mainboardinit cpu/x86/sse/disable_sse.inc
mainboardinit cpu/x86/mmx/disable_mmx.inc
end
##
## Include the secondary Configuration files
##
if CONFIG_CHIP_NAME
config chip.h
end
# sample config for tyan/s2850
chip northbridge/amd/amdk8/root_complex
device apic_cluster 0 on
chip cpu/amd/socket_940
device apic 0 on end
end
end
device pci_domain 0 on
chip northbridge/amd/amdk8
device pci 18.0 on # LDT0
# devices on link 2, link 2 == LDT 2
chip southbridge/amd/amd8111
# this "device pci 0.0" is the parent the next one
# PCI bridge
device pci 0.0 on
device pci 0.0 on end
device pci 0.1 on end
device pci 0.2 off end
device pci 1.0 off end
#chip drivers/ati/ragexl
chip drivers/pci/onboard
device pci b.0 on end
register "rom_address" = "0xfff80000"
end
end
device pci 1.0 on
chip superio/winbond/w83627hf
device pnp 2e.0 on # Floppy
io 0x60 = 0x3f0
irq 0x70 = 6
drq 0x74 = 2
end
device pnp 2e.1 off # Parallel Port
io 0x60 = 0x378
irq 0x70 = 7
end
device pnp 2e.2 on # Com1
io 0x60 = 0x3f8
irq 0x70 = 4
end
device pnp 2e.3 off # Com2
io 0x60 = 0x2f8
irq 0x70 = 3
end
device pnp 2e.5 on # Keyboard
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1
irq 0x72 = 12
end
device pnp 2e.6 off # CIR
io 0x60 = 0x100
end
device pnp 2e.7 off # GAME_MIDI_GIPO1
io 0x60 = 0x220
io 0x62 = 0x300
irq 0x70 = 9
end
device pnp 2e.8 off end # GPIO2
device pnp 2e.9 off end # GPIO3
device pnp 2e.a off end # ACPI
device pnp 2e.b on # HW Monitor
io 0x60 = 0x290
irq 0x70 = 5
end
end
end
device pci 1.1 on end
device pci 1.2 on end
device pci 1.3 on
chip drivers/generic/generic #dimm 0-0-0
device i2c 50 on end
end
chip drivers/generic/generic #dimm 0-0-1
device i2c 51 on end
end
chip drivers/generic/generic #dimm 0-1-0
device i2c 52 on end
end
chip drivers/generic/generic #dimm 0-1-1
device i2c 53 on end
end
end
device pci 1.5 on end
device pci 1.6 off end
register "ide0_enable" = "1"
register "ide1_enable" = "1"
end
end # device pci 18.0
device pci 18.0 on end
device pci 18.0 on end
device pci 18.1 on end
device pci 18.2 on end
device pci 18.3 on end
end
end
end