coreboot-kgpe-d16/src/mainboard/google/slippy/gpio.h
Duncan Laurie 994611a637 lynxpoint: Add an inverted input GPIO type
The wake device input pins are active low and the
GPIOs need to be set as inverted when they are marked
as an input so they are not spuriously logged.

suspend/resume on slippy with trackpad wake:

8 | 2013-05-29 07:43:14 | ACPI Enter | S3
9 | 2013-05-29 07:43:18 | ACPI Wake | S3
10 | 2013-05-29 07:43:18 | Wake Source | GPIO | 12

and with power button wake:

11 | 2013-05-29 07:43:35 | ACPI Enter | S3
12 | 2013-05-29 07:43:40 | EC Event | Power Button
13 | 2013-05-29 07:43:40 | ACPI Wake | S3
14 | 2013-05-29 07:43:40 | Wake Source | Power Button | 0

Change-Id: I15d38dcc9b2fb4b2b0eb27da358fa3c343e22323
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/56940
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4209
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-11-26 20:41:42 +01:00

124 lines
5.2 KiB
C

/*
* This file is part of the coreboot project.
*
* Copyright (C) 2012 Google Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef SLIPPY_GPIO_H
#define SLIPPY_GPIO_H
struct pch_lp_gpio_map;
const struct pch_lp_gpio_map mainboard_gpio_map[] = {
LP_GPIO_UNUSED, /* 0: UNUSED */
LP_GPIO_UNUSED, /* 1: UNUSED */
LP_GPIO_UNUSED, /* 2: UNUSED */
LP_GPIO_UNUSED, /* 3: UNUSED */
LP_GPIO_NATIVE, /* 4: NATIVE: I2C0_SDA_GPIO4 */
LP_GPIO_NATIVE, /* 5: NATIVE: I2C0_SCL_GPIO5 */
LP_GPIO_NATIVE, /* 6: NATIVE: I2C1_SDA_GPIO6 */
LP_GPIO_NATIVE, /* 7: NATIVE: I2C1_SCL_GPIO7 */
LP_GPIO_ACPI_SCI, /* 8: LTE_WAKE_L_Q */
LP_GPIO_INPUT, /* 9: RAM_ID1 */
LP_GPIO_ACPI_SCI, /* 10: WLAN_WAKE_L_Q */
LP_GPIO_UNUSED, /* 11: UNUSED */
LP_GPIO_INPUT_INVERT, /* 12: TRACKPAD_INT_L (WAKE) */
LP_GPIO_INPUT, /* 13: RAM_ID0 */
LP_GPIO_INPUT, /* 14: EC_IN_RW */
LP_GPIO_UNUSED, /* 15: UNUSED (STRAP) */
LP_GPIO_OUT_LOW, /* 16: PCH_SSD_12_EN (iSSD VDDC) */
LP_GPIO_OUT_LOW, /* 17: PCH_SSD_18_EN (iSSD VCCQ) */
LP_GPIO_NATIVE, /* 18: PCIE_CLKREQ_WLAN# */
LP_GPIO_UNUSED, /* 19: UNUSED */
LP_GPIO_UNUSED, /* 20: UNUSED */
LP_GPIO_UNUSED, /* 21: UNUSED */
LP_GPIO_UNUSED, /* 22: UNUSED */
LP_GPIO_UNUSED, /* 23: UNUSED */
LP_GPIO_UNUSED, /* 24: UNUSED */
LP_GPIO_INPUT_INVERT, /* 25: TOUCH_INT_L (WAKE) */
LP_GPIO_UNUSED, /* 26: UNUSED */
LP_GPIO_UNUSED, /* 27: UNUSED */
LP_GPIO_UNUSED, /* 28: UNUSED */
LP_GPIO_UNUSED, /* 29: UNUSED */
LP_GPIO_NATIVE, /* 30: NATIVE: PCH_SUSWARN_L */
LP_GPIO_NATIVE, /* 31: NATIVE: ACPRESENT */
LP_GPIO_NATIVE, /* 32: NATIVE: LPC_CLKRUN_L */
LP_GPIO_NATIVE, /* 33: NATIVE: DEVSLP0 */
LP_GPIO_ACPI_SMI, /* 34: EC_SMI_L */
LP_GPIO_ACPI_SMI, /* 35: PCH_NMI_DBG_L (route in NMI_EN) */
LP_GPIO_ACPI_SCI, /* 36: EC_SCI_L */
LP_GPIO_UNUSED, /* 37: UNUSED */
LP_GPIO_UNUSED, /* 38: UNUSED */
LP_GPIO_UNUSED, /* 39: UNUSED */
LP_GPIO_NATIVE, /* 40: NATIVE: USB_OC0# */
LP_GPIO_UNUSED, /* 41: UNUSED */
LP_GPIO_NATIVE, /* 42: NATIVE: USB_OC2# */
LP_GPIO_UNUSED, /* 43: UNUSED */
LP_GPIO_OUT_LOW, /* 44: PP3300_SSD_EN (iSSD VCC_FLASH) */
LP_GPIO_OUT_HIGH, /* 45: PP3300_CODEC_EN */
LP_GPIO_OUT_HIGH, /* 46: WLAN_DISABLE_L */
LP_GPIO_INPUT, /* 47: RAM_ID2 */
LP_GPIO_UNUSED, /* 48: UNUSED */
LP_GPIO_OUT_LOW, /* 49: PP3300_SSD_IO_EN (iSSD VCC_IO) */
LP_GPIO_UNUSED, /* 50: UNUSED */
LP_GPIO_INPUT, /* 51: ALS_INT_L */
LP_GPIO_INPUT, /* 52: SIM_DET */
LP_GPIO_PIRQ, /* 53: TRACKPAD_INT_DX (PIRQV) */
LP_GPIO_PIRQ, /* 54: TOUCH_INT_L_DX (PIRQW) */
LP_GPIO_UNUSED, /* 55: UNUSED */
LP_GPIO_UNUSED, /* 56: UNUSED */
LP_GPIO_OUT_HIGH, /* 57: PP3300_CCD_EN */
LP_GPIO_INPUT, /* 58: PCH_SPI_WP_D */
LP_GPIO_OUT_HIGH, /* 59: LTE_DISABLE_L */
LP_GPIO_NATIVE, /* 60: NATIVE: SML0ALERT */
LP_GPIO_NATIVE, /* 61: NATIVE: PCH_SUS_STAT */
LP_GPIO_NATIVE, /* 62: NATIVE: PCH_SUS_CLK */
LP_GPIO_NATIVE, /* 63: NATIVE: PCH_SLP_S5_L */
LP_GPIO_UNUSED, /* 64: UNUSED */
LP_GPIO_UNUSED, /* 65: UNUSED */
LP_GPIO_UNUSED, /* 66: UNUSED */
LP_GPIO_UNUSED, /* 67: UNUSED */
LP_GPIO_UNUSED, /* 68: UNUSED */
LP_GPIO_UNUSED, /* 69: UNUSED */
LP_GPIO_UNUSED, /* 70: UNUSED */
LP_GPIO_NATIVE, /* 71: NATIVE: MODPHY_EN */
LP_GPIO_NATIVE, /* 72: NATIVE: PCH_BATLOW# */
LP_GPIO_NATIVE, /* 73: NATIVE: SMB1ALERT# */
LP_GPIO_NATIVE, /* 74: NATIVE: SMB_ME1_DAT */
LP_GPIO_NATIVE, /* 75: NATIVE: SMB_ME1_CLK */
LP_GPIO_UNUSED, /* 76: UNUSED */
LP_GPIO_UNUSED, /* 77: UNUSED */
LP_GPIO_UNUSED, /* 78: UNUSED */
LP_GPIO_UNUSED, /* 79: UNUSED */
LP_GPIO_UNUSED, /* 80: UNUSED */
LP_GPIO_NATIVE, /* 81: NATIVE: SPKR */
LP_GPIO_NATIVE, /* 82: NATIVE: EC_RCIN_L */
LP_GPIO_UNUSED, /* 83: UNUSED */
LP_GPIO_UNUSED, /* 84: UNUSED */
LP_GPIO_UNUSED, /* 85: UNUSED */
LP_GPIO_UNUSED, /* 86: UNUSED (STRAP) */
LP_GPIO_UNUSED, /* 87: UNUSED */
LP_GPIO_UNUSED, /* 88: UNUSED */
LP_GPIO_UNUSED, /* 89: UNUSED */
LP_GPIO_UNUSED, /* 90: UNUSED */
LP_GPIO_UNUSED, /* 91: UNUSED */
LP_GPIO_UNUSED, /* 92: UNUSED */
LP_GPIO_UNUSED, /* 93: UNUSED */
LP_GPIO_UNUSED, /* 94: UNUSED */
LP_GPIO_END
};
#endif