coreboot-kgpe-d16/src/mainboard/amd/db800/irq_tables.c
Uwe Hermann 95313d824d Major CONFIG_IRQ_TABLE_COUNT fixing and cleanups. Some of these boards
and PIRQ tables were actually wrong, I cannot imagine they ever
worked properly.

 - Use CONFIG_IRQ_TABLE_COUNT in all irq_tables.c files instead of
   hard-coded numbers.

 - Make all CONFIG_IRQ_TABLE_COUNT values in irq_tables.c match Options.lb.

 - Make all CONFIG_IRQ_TABLE_COUNT values match the actual number of entries
   in the irq_tables.c file.

 - Set all CONFIG_IRQ_SLOT_COUNT values in src/.../Options.lb for those
   boards where they were set to 0 (in order to be overridden in
   the respective targets/.../Config.lb).

   This is mainly done to aid Patrick's scripts for kconfig conversion.

 - Fix a number of comments in irq_tables.c files.

 - Drop CONFIG_IRQ_SLOT_COUNT usage from boards that don't have irq_tables.c:
    - tyan/s1846
    - asus/a8v-e_se
    - asus/m2v-mx_se

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4739 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-07 21:51:33 +00:00

69 lines
3 KiB
C

/*
* This file is part of the coreboot project.
*
* Copyright (C) 2007 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <arch/pirq_routing.h>
#include <console/console.h>
#include <arch/io.h>
#include <arch/pirq_routing.h>
#include "../../../southbridge/amd/cs5536/cs5536.h"
/* Platform IRQs */
#define PIRQA 10
#define PIRQB 11
#define PIRQC 10
#define PIRQD 11
/* Map */
#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */
#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */
#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */
#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */
/* Link */
#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */
#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */
#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */
#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */
const struct irq_routing_table intel_irq_routing_table = {
PIRQ_SIGNATURE, /* u32 signature */
PIRQ_VERSION, /* u16 version */
32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */
0x00, /* Where the interrupt router lies (bus) */
(0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */
0x00, /* IRQs devoted exclusively to PCI usage */
0x100B, /* Vendor */
0x002B, /* Device */
0, /* Crap (miniport) */
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */
0x00, /* u8 checksum , this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
{
/* If you change the number of entries, change the CONFIG_IRQ_SLOT_COUNT above! */
/* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
{0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* cpu */
{0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */
{0x00, (0x0D << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet */
{0x00, (0x0E << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}}, 0x1, 0x0}, /* slot1 */
}
};
unsigned long write_pirq_routing_table(unsigned long addr)
{
return copy_pirq_routing_table(addr);
}