coreboot-kgpe-d16/targets/motorola/sandpoint/Config.lb.ide_stream

91 lines
2.1 KiB
Plaintext

# Sample config file for Motorola Sandpoint X3 Demo Board with
# the Altimus mpc7410 PMC card
# This will make a target directory of ./sandpoint
loadoptions
target sandpoint
uses CONFIG_CROSS_COMPILE
uses CONFIG_HAVE_OPTION_TABLE
uses CONFIG_SANDPOINT_ALTIMUS
uses CONFIG_COMPRESS
uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
uses CONFIG_USE_INIT
uses CONFIG_CHIP_CONFIGURE
uses CONFIG_NO_POST
uses CONFIG_CONSOLE_SERIAL8250
uses CONFIG_TTYS0_BASE
uses CONFIG_IDE_PAYLOAD
uses CONFIG_IDE_BOOT_DRIVE
uses CONFIG_IDE_SWAB CONFIG_IDE_OFFSET
uses CONFIG_ROM_SIZE
uses CONFIG_RESET
uses CONFIG_EXCEPTION_VECTORS
uses CONFIG_ROMBASE
uses CONFIG_ROMSTART
uses CONFIG_RAMBASE
uses CONFIG_RAMSTART
uses CONFIG_STACK_SIZE
uses CONFIG_HEAP_SIZE
## use a cross compiler
#option CONFIG_CROSS_COMPILE="powerpc-eabi-"
#option CONFIG_CROSS_COMPILE="ppc_74xx-"
## Use stage 1 initialization code
option CONFIG_USE_INIT=1
## Use static configuration
option CONFIG_CHIP_CONFIGURE=1
## We don't use compressed image
option CONFIG_COMPRESS=0
## Turn off POST codes
option CONFIG_NO_POST=1
## Enable serial console
option CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
option CONFIG_CONSOLE_SERIAL8250=1
option CONFIG_TTYS0_BASE=0x3f8
## Boot linux from IDE
option CONFIG_IDE_PAYLOAD=1
option CONFIG_IDE_BOOT_DRIVE=0
option CONFIG_IDE_SWAB=1
option CONFIG_IDE_OFFSET=0
# ROM is 1Mb
option CONFIG_ROM_SIZE=1024*1024
# Set stack and heap sizes (stage 2)
option CONFIG_STACK_SIZE=0x10000
option CONFIG_HEAP_SIZE=0x10000
# Sandpoint Demo Board
romimage "normal"
## Base of ROM
option CONFIG_ROMBASE=0xfff00000
## Sandpoint reset vector
option CONFIG_RESET=CONFIG_ROMBASE+0x100
## Exception vectors (other than reset vector)
option CONFIG_EXCEPTION_VECTORS=CONFIG_RESET+0x100
## Start of coreboot in the boot rom
## = CONFIG_RESET + exeception vector table size
option CONFIG_ROMSTART=CONFIG_RESET+0x3100
## Coreboot C code runs at this location in RAM
option CONFIG_RAMBASE=0x00100000
option CONFIG_RAMSTART=0x00100000
option CONFIG_SANDPOINT_ALTIMUS=1
mainboard motorola/sandpoint
end
buildrom ./coreboot.rom CONFIG_ROM_SIZE "normal"