Go to file
Martin Roth 3a54318856 Add EM100 'hyper term' spi console support in ramstage & smm
The EM100Pro allows the debug console to be sent over the SPI bus.
This is not yet working in romstage due to the use of static variables
in the SPI driver code.  It is also not working on chipsets that have
SPI write buffers of less than 10 characters due to the 9 byte
command/header length specified by the EM100 protocol.

While this currently works only with the EM100, it seems like it would
be useful on any logic analyzer with SPI debug - just filter on command
bytes of 0x11.

Change-Id: Icd42ccd96cab0a10a4e70f4b02ecf9de8169564b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11743
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-05 17:43:11 +00:00
3rdparty 3dparty/blobs: Advance to pull in binary microcode 2015-09-29 04:49:46 +00:00
Documentation documentation: Add documentation for timestamp library 2015-08-07 18:00:07 +02:00
payloads libpayload: Check for CBFS_DEFAULT_MEDIA in cbfs_get_file_content() 2015-10-05 15:23:54 +00:00
src Add EM100 'hyper term' spi console support in ramstage & smm 2015-10-05 17:43:11 +00:00
util buildgcc: Fix the binutils-no-doc patch with 2.25 2015-10-05 17:22:41 +00:00
.gitignore .gitignore: adapt to new buildgcc version 2015-09-28 20:05:14 +00:00
.gitmodules submodules: add arm-trusted-firmware third-party repository 2015-06-23 08:20:24 +02:00
.gitreview add .gitreview 2012-11-01 23:13:39 +01:00
COPYING
MAINTAINERS MAINTAINERS: grab build system responsibility 2015-05-22 22:47:03 +02:00
Makefile Add cscope/ctags generation for the current project 2015-07-30 05:21:28 +02:00
Makefile.inc Makefile.inc: Align paths in CBFS add messages 2015-09-30 23:35:36 +00:00
README README: improve description of compiler requirements 2015-07-30 05:11:33 +02:00
toolchain.inc linking: add and use LDFLAGS_common 2015-09-09 19:35:54 +00:00

README

-------------------------------------------------------------------------------
coreboot README
-------------------------------------------------------------------------------

coreboot is a Free Software project aimed at replacing the proprietary BIOS
(firmware) found in most computers.  coreboot performs a little bit of
hardware initialization and then executes additional boot logic, called a
payload.

With the separation of hardware initialization and later boot logic,
coreboot can scale from specialized applications that run directly
firmware, run operating systems in flash, load custom
bootloaders, or implement firmware standards, like PC BIOS services or
UEFI. This allows for systems to only include the features necessary
in the target application, reducing the amount of code and flash space
required.

coreboot was formerly known as LinuxBIOS.


Payloads
--------

After the basic initialization of the hardware has been performed, any
desired "payload" can be started by coreboot.

See http://www.coreboot.org/Payloads for a list of supported payloads.


Supported Hardware
------------------

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

 * http://www.coreboot.org/Supported_Motherboards
 * http://www.coreboot.org/Supported_Chipsets_and_Devices


Build Requirements
------------------

 * make
 * gcc / g++
   Because Linux distribution compilers tend to use lots of patches. coreboot
   does lots of "unusual" things in its build system, some of which break due
   to those patches, sometimes by gcc aborting, sometimes - and that's worse -
   by generating broken object code.
   Two options: use our toolchain (eg. make crosstools-i386) or enable the
   ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this
   case).
 * iasl (for targets with ACPI support)

Optional:

 * doxygen (for generating/viewing documentation)
 * gdb (for better debugging facilities on some targets)
 * ncurses (for 'make menuconfig' and 'make nconfig')
 * flex and bison (for regenerating parsers)


Building coreboot
-----------------

Please consult http://www.coreboot.org/Build_HOWTO for details.


Testing coreboot Without Modifying Your Hardware
------------------------------------------------

If you want to test coreboot without any risks before you really decide
to use it on your hardware, you can use the QEMU system emulator to run
coreboot virtually in QEMU.

Please see http://www.coreboot.org/QEMU for details.


Website and Mailing List
------------------------

Further details on the project, a FAQ, many HOWTOs, news, development
guidelines and more can be found on the coreboot website:

  http://www.coreboot.org

You can contact us directly on the coreboot mailing list:

  http://www.coreboot.org/Mailinglist


Copyright and License
---------------------

The copyright on coreboot is owned by quite a large number of individual
developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL).
Some files are licensed under the "GPL (version 2, or any later version)",
and some files are licensed under the "GPL, version 2". For some parts, which
were derived from other projects, other (GPL-compatible) licenses may apply.
Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.