coreboot-kgpe-d16/util/flashrom/spi.c

578 lines
16 KiB
C

/*
* This file is part of the flashrom project.
*
* Copyright (C) 2007, 2008 Carl-Daniel Hailfinger
* Copyright (C) 2008 Ronald Hoogenboom <ronald@zonnet.nl>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
* Contains the generic SPI framework
*/
#include <stdio.h>
#include <pci/pci.h>
#include <stdint.h>
#include <string.h>
#include "flash.h"
#define ITE_SUPERIO_PORT1 0x2e
#define ITE_SUPERIO_PORT2 0x4e
/* Read Electronic ID */
#define JEDEC_RDID {0x9f}
#define JEDEC_RDID_OUTSIZE 0x01
#define JEDEC_RDID_INSIZE 0x03
/* Write Enable */
#define JEDEC_WREN {0x06}
#define JEDEC_WREN_OUTSIZE 0x01
#define JEDEC_WREN_INSIZE 0x00
/* Write Disable */
#define JEDEC_WRDI {0x04}
#define JEDEC_WRDI_OUTSIZE 0x01
#define JEDEC_WRDI_INSIZE 0x00
/* Chip Erase 0x60 is supported by Macronix/SST chips. */
#define JEDEC_CE_60 {0x60};
#define JEDEC_CE_60_OUTSIZE 0x01
#define JEDEC_CE_60_INSIZE 0x00
/* Chip Erase 0xc7 is supported by ST/EON/Macronix chips. */
#define JEDEC_CE_C7 {0xc7};
#define JEDEC_CE_C7_OUTSIZE 0x01
#define JEDEC_CE_C7_INSIZE 0x00
/* Block Erase 0x52 is supported by SST chips. */
#define JEDEC_BE_52 {0x52};
#define JEDEC_BE_52_OUTSIZE 0x04
#define JEDEC_BE_52_INSIZE 0x00
/* Block Erase 0xd8 is supported by EON/Macronix chips. */
#define JEDEC_BE_D8 {0xd8};
#define JEDEC_BE_D8_OUTSIZE 0x04
#define JEDEC_BE_D8_INSIZE 0x00
/* Sector Erase 0x20 is supported by Macronix/SST chips. */
#define JEDEC_SE {0x20};
#define JEDEC_SE_OUTSIZE 0x04
#define JEDEC_SE_INSIZE 0x00
/* Read Status Register */
#define JEDEC_RDSR {0x05};
#define JEDEC_RDSR_OUTSIZE 0x01
#define JEDEC_RDSR_INSIZE 0x01
#define JEDEC_RDSR_BIT_WIP (0x01 << 0)
/* Write Status Register */
#define JEDEC_WRSR 0x01
#define JEDEC_WRSR_OUTSIZE 0x02
#define JEDEC_WRSR_INSIZE 0x00
/* Read the memory */
#define JEDEC_READ 0x03
#define JEDEC_READ_OUTSIZE 0x04
/* JEDEC_READ_INSIZE : any length */
/* Write memory byte */
#define JEDEC_BYTE_PROGRAM 0x02
#define JEDEC_BYTE_PROGRAM_OUTSIZE 0x05
#define JEDEC_BYTE_PROGRAM_INSIZE 0x00
uint16_t it8716f_flashport = 0;
/* use fast 33MHz SPI (<>0) or slow 16MHz (0) */
int fast_spi = 1;
void spi_prettyprint_status_register(struct flashchip *flash);
void spi_disable_blockprotect(void);
/* Generic Super I/O helper functions */
uint8_t regval(uint16_t port, uint8_t reg)
{
outb(reg, port);
return inb(port + 1);
}
void regwrite(uint16_t port, uint8_t reg, uint8_t val)
{
outb(reg, port);
outb(val, port + 1);
}
/* Helper functions for most recent ITE IT87xx Super I/O chips */
#define CHIP_ID_BYTE1_REG 0x20
#define CHIP_ID_BYTE2_REG 0x21
static void enter_conf_mode_ite(uint16_t port)
{
outb(0x87, port);
outb(0x01, port);
outb(0x55, port);
if (port == ITE_SUPERIO_PORT1)
outb(0x55, port);
else
outb(0xaa, port);
}
static void exit_conf_mode_ite(uint16_t port)
{
regwrite(port, 0x02, 0x02);
}
static uint16_t find_ite_spi_flash_port(uint16_t port)
{
uint8_t tmp = 0;
uint16_t id, flashport = 0;
enter_conf_mode_ite(port);
id = regval(port, CHIP_ID_BYTE1_REG) << 8;
id |= regval(port, CHIP_ID_BYTE2_REG);
/* TODO: Handle more IT87xx if they support flash translation */
if (id == 0x8716) {
/* NOLDN, reg 0x24, mask out lowest bit (suspend) */
tmp = regval(port, 0x24) & 0xFE;
printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
0xFFFE0000, 0xFFFFFFFF, (tmp & 1 << 1) ? "en" : "dis");
printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
0x000E0000, 0x000FFFFF, (tmp & 1 << 1) ? "en" : "dis");
printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
0xFFEE0000, 0xFFEFFFFF, (tmp & 1 << 2) ? "en" : "dis");
printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
0xFFF80000, 0xFFFEFFFF, (tmp & 1 << 3) ? "en" : "dis");
printf("LPC write to serial flash %sabled\n",
(tmp & 1 << 4) ? "en" : "dis");
printf("serial flash pin %i\n", (tmp & 1 << 5) ? 87 : 29);
/* LDN 0x7, reg 0x64/0x65 */
regwrite(port, 0x07, 0x7);
flashport = regval(port, 0x64) << 8;
flashport |= regval(port, 0x65);
}
exit_conf_mode_ite(port);
return flashport;
}
int it87xx_probe_spi_flash(const char *name)
{
it8716f_flashport = find_ite_spi_flash_port(ITE_SUPERIO_PORT1);
if (!it8716f_flashport)
it8716f_flashport = find_ite_spi_flash_port(ITE_SUPERIO_PORT2);
return (!it8716f_flashport);
}
/* The IT8716F only supports commands with length 1,2,4,5 bytes including
command byte and can not read more than 3 bytes from the device.
This function expects writearr[0] to be the first byte sent to the device,
whereas the IT8716F splits commands internally into address and non-address
commands with the address in inverse wire order. That's why the register
ordering in case 4 and 5 may seem strange. */
static int it8716f_spi_command(uint16_t port, unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr)
{
uint8_t busy, writeenc;
int i;
do {
busy = inb(port) & 0x80;
} while (busy);
if (readcnt > 3) {
printf("%s called with unsupported readcnt %i.\n",
__FUNCTION__, readcnt);
return 1;
}
switch (writecnt) {
case 1:
outb(writearr[0], port + 1);
writeenc = 0x0;
break;
case 2:
outb(writearr[0], port + 1);
outb(writearr[1], port + 7);
writeenc = 0x1;
break;
case 4:
outb(writearr[0], port + 1);
outb(writearr[1], port + 4);
outb(writearr[2], port + 3);
outb(writearr[3], port + 2);
writeenc = 0x2;
break;
case 5:
outb(writearr[0], port + 1);
outb(writearr[1], port + 4);
outb(writearr[2], port + 3);
outb(writearr[3], port + 2);
outb(writearr[4], port + 7);
writeenc = 0x3;
break;
default:
printf("%s called with unsupported writecnt %i.\n",
__FUNCTION__, writecnt);
return 1;
}
/* Start IO, 33 or 16 MHz, readcnt input bytes, writecnt output bytes.
* Note:
* We can't use writecnt directly, but have to use a strange encoding.
*/
outb(((0x4 + (fast_spi ? 1 : 0)) << 4) | ((readcnt & 0x3) << 2) | (writeenc), port);
if (readcnt > 0) {
do {
busy = inb(port) & 0x80;
} while (busy);
for (i = 0; i < readcnt; i++) {
readarr[i] = inb(port + 5 + i);
}
}
return 0;
}
int generic_spi_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr)
{
if (it8716f_flashport)
return it8716f_spi_command(it8716f_flashport, writecnt, readcnt, writearr, readarr);
printf_debug("%s called, but no SPI chipset detected\n", __FUNCTION__);
return 1;
}
static int generic_spi_rdid(unsigned char *readarr)
{
const unsigned char cmd[] = JEDEC_RDID;
if (generic_spi_command(JEDEC_RDID_OUTSIZE, JEDEC_RDID_INSIZE, cmd, readarr))
return 1;
printf_debug("RDID returned %02x %02x %02x.\n", readarr[0], readarr[1], readarr[2]);
return 0;
}
void generic_spi_write_enable()
{
const unsigned char cmd[] = JEDEC_WREN;
/* Send WREN (Write Enable) */
generic_spi_command(JEDEC_WREN_OUTSIZE, JEDEC_WREN_INSIZE, cmd, NULL);
}
void generic_spi_write_disable()
{
const unsigned char cmd[] = JEDEC_WRDI;
/* Send WRDI (Write Disable) */
generic_spi_command(JEDEC_WRDI_OUTSIZE, JEDEC_WRDI_INSIZE, cmd, NULL);
}
int probe_spi(struct flashchip *flash)
{
unsigned char readarr[3];
uint8_t manuf_id;
uint16_t model_id;
if (!generic_spi_rdid(readarr)) {
manuf_id = readarr[0];
model_id = (readarr[1] << 8) | readarr[2];
printf_debug("%s: id1 0x%x, id2 0x%x\n", __FUNCTION__, manuf_id, model_id);
if (manuf_id == flash->manufacture_id &&
model_id == flash->model_id) {
/* Print the status register to tell the
* user about possible write protection.
*/
spi_prettyprint_status_register(flash);
return 1;
}
/* Test if this is a pure vendor match. */
if (manuf_id == flash->manufacture_id &&
GENERIC_DEVICE_ID == flash->model_id)
return 1;
}
return 0;
}
uint8_t generic_spi_read_status_register()
{
const unsigned char cmd[] = JEDEC_RDSR;
unsigned char readarr[1];
/* Read Status Register */
generic_spi_command(JEDEC_RDSR_OUTSIZE, JEDEC_RDSR_INSIZE, cmd, readarr);
return readarr[0];
}
/* Prettyprint the status register. Common definitions.
*/
void spi_prettyprint_status_register_common(uint8_t status)
{
printf_debug("Chip status register: Bit 5 / Block Protect 3 (BP3) is "
"%sset\n", (status & (1 << 5)) ? "" : "not ");
printf_debug("Chip status register: Bit 4 / Block Protect 2 (BP2) is "
"%sset\n", (status & (1 << 4)) ? "" : "not ");
printf_debug("Chip status register: Bit 3 / Block Protect 1 (BP1) is "
"%sset\n", (status & (1 << 3)) ? "" : "not ");
printf_debug("Chip status register: Bit 2 / Block Protect 0 (BP0) is "
"%sset\n", (status & (1 << 2)) ? "" : "not ");
printf_debug("Chip status register: Write Enable Latch (WEL) is "
"%sset\n", (status & (1 << 1)) ? "" : "not ");
printf_debug("Chip status register: Write In Progress (WIP/BUSY) is "
"%sset\n", (status & (1 << 0)) ? "" : "not ");
}
/* Prettyprint the status register. Works for
* ST M25P series
* MX MX25L series
*/
void spi_prettyprint_status_register_st_m25p(uint8_t status)
{
printf_debug("Chip status register: Status Register Write Disable "
"(SRWD) is %sset\n", (status & (1 << 7)) ? "" : "not ");
printf_debug("Chip status register: Bit 6 is "
"%sset\n", (status & (1 << 6)) ? "" : "not ");
spi_prettyprint_status_register_common(status);
}
/* Prettyprint the status register. Works for
* SST 25VF016
*/
void spi_prettyprint_status_register_sst25vf016(uint8_t status)
{
const char *bpt[] = {
"none",
"1F0000H-1FFFFFH",
"1E0000H-1FFFFFH",
"1C0000H-1FFFFFH",
"180000H-1FFFFFH",
"100000H-1FFFFFH",
"all", "all"
};
printf_debug("Chip status register: Block Protect Write Disable "
"(BPL) is %sset\n", (status & (1 << 7)) ? "" : "not ");
printf_debug("Chip status register: Auto Address Increment Programming "
"(AAI) is %sset\n", (status & (1 << 6)) ? "" : "not ");
spi_prettyprint_status_register_common(status);
printf_debug("Resulting block protection : %s\n",
bpt[(status & 0x1c) >> 2]);
}
void spi_prettyprint_status_register(struct flashchip *flash)
{
uint8_t status;
status = generic_spi_read_status_register();
printf_debug("Chip status register is %02x\n", status);
switch (flash->manufacture_id) {
case ST_ID:
case MX_ID:
if ((flash->model_id & 0xff00) == 0x2000)
spi_prettyprint_status_register_st_m25p(status);
break;
case SST_ID:
if (flash->model_id == SST_25VF016B)
spi_prettyprint_status_register_sst25vf016(status);
break;
}
}
int generic_spi_chip_erase_c7(struct flashchip *flash)
{
const unsigned char cmd[] = JEDEC_CE_C7;
spi_disable_blockprotect();
generic_spi_write_enable();
/* Send CE (Chip Erase) */
generic_spi_command(JEDEC_CE_C7_OUTSIZE, JEDEC_CE_C7_INSIZE, cmd, NULL);
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 1-85 s, so wait in 1 s steps.
*/
while (generic_spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
sleep(1);
return 0;
}
/* Block size is usually
* 64k for Macronix
* 32k for SST
* 4-32k non-uniform for EON
*/
int generic_spi_block_erase_d8(const struct flashchip *flash, unsigned long addr)
{
unsigned char cmd[JEDEC_BE_D8_OUTSIZE] = JEDEC_BE_D8;
cmd[1] = (addr & 0x00ff0000) >> 16;
cmd[2] = (addr & 0x0000ff00) >> 8;
cmd[3] = (addr & 0x000000ff);
generic_spi_write_enable();
/* Send BE (Block Erase) */
generic_spi_command(JEDEC_BE_D8_OUTSIZE, JEDEC_BE_D8_INSIZE, cmd, NULL);
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 100-4000 ms, so wait in 100 ms steps.
*/
while (generic_spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
usleep(100 * 1000);
return 0;
}
/* Sector size is usually 4k, though Macronix eliteflash has 64k */
int generic_spi_sector_erase(const struct flashchip *flash, unsigned long addr)
{
unsigned char cmd[JEDEC_SE_OUTSIZE] = JEDEC_SE;
cmd[1] = (addr & 0x00ff0000) >> 16;
cmd[2] = (addr & 0x0000ff00) >> 8;
cmd[3] = (addr & 0x000000ff);
generic_spi_write_enable();
/* Send SE (Sector Erase) */
generic_spi_command(JEDEC_SE_OUTSIZE, JEDEC_SE_INSIZE, cmd, NULL);
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 15-800 ms, so wait in 10 ms steps.
*/
while (generic_spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
usleep(10 * 1000);
return 0;
}
/* Page size is usually 256 bytes */
void it8716f_spi_page_program(int block, uint8_t *buf, uint8_t *bios) {
int i;
generic_spi_write_enable();
outb(0x06 , it8716f_flashport + 1);
outb(((2 + (fast_spi ? 1 : 0)) << 4), it8716f_flashport);
for (i = 0; i < 256; i++) {
bios[256 * block + i] = buf[256 * block + i];
}
outb(0, it8716f_flashport);
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 1-10 ms, so wait in 1 ms steps.
*/
while (generic_spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
usleep(1000);
}
void generic_spi_page_program(int block, uint8_t *buf, uint8_t *bios)
{
if (it8716f_flashport)
it8716f_spi_page_program(block, buf, bios);
}
/*
* This is according the SST25VF016 datasheet, who knows it is more
* generic that this...
*/
void spi_write_status_register(int status)
{
const unsigned char cmd[] = {JEDEC_WRSR, (unsigned char)status};
/* Send WRSR (Write Status Register) */
generic_spi_command(JEDEC_WRSR_OUTSIZE, JEDEC_WRSR_INSIZE, cmd, NULL);
}
void spi_byte_program(int address, uint8_t byte)
{
const unsigned char cmd[JEDEC_BYTE_PROGRAM_OUTSIZE] = {JEDEC_BYTE_PROGRAM,
(address>>16)&0xff,
(address>>8)&0xff,
(address>>0)&0xff,
byte
};
/* Send Byte-Program */
generic_spi_command(JEDEC_BYTE_PROGRAM_OUTSIZE, JEDEC_BYTE_PROGRAM_INSIZE, cmd, NULL);
}
void spi_disable_blockprotect(void)
{
uint8_t status;
status = generic_spi_read_status_register();
/* If there is block protection in effect, unprotect it first. */
if ((status & 0x3c) != 0) {
printf_debug("Some block protection in effect, disabling\n");
generic_spi_write_enable();
spi_write_status_register(status & ~0x3c);
}
}
/*
* IT8716F only allows maximum of 512 kb SPI mapped to LPC memory cycles
* Program chip using firmware cycle byte programming. (SLOW!)
*/
int it8716f_over512k_spi_chip_write(struct flashchip *flash, uint8_t *buf)
{
int total_size = 1024 * flash->total_size;
int i;
fast_spi = 0;
spi_disable_blockprotect();
for (i = 0; i < total_size; i++) {
generic_spi_write_enable();
spi_byte_program(i, buf[i]);
while (generic_spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
myusec_delay(10);
}
/* resume normal ops... */
outb(0x20, it8716f_flashport);
return 0;
}
void spi_3byte_read(int address, uint8_t *bytes, int len)
{
const unsigned char cmd[JEDEC_READ_OUTSIZE] = {JEDEC_READ,
(address >> 16) & 0xff,
(address >> 8) & 0xff,
(address >> 0) & 0xff,
};
/* Send Read */
generic_spi_command(JEDEC_READ_OUTSIZE, len, cmd, bytes);
}
/*
* IT8716F only allows maximum of 512 kb SPI mapped to LPC memory cycles
* Need to read this big flash using firmware cycles 3 byte at a time.
*/
int generic_spi_chip_read(struct flashchip *flash, uint8_t *buf)
{
int total_size = 1024 * flash->total_size;
int i;
fast_spi = 0;
if (total_size > 512 * 1024) {
for (i = 0; i < total_size; i += 3) {
int toread = 3;
if (total_size - i < toread)
toread = total_size - i;
spi_3byte_read(i, buf + i, toread);
}
} else {
memcpy(buf, (const char *)flash->virtual_memory, total_size);
}
return 0;
}
int generic_spi_chip_write(struct flashchip *flash, uint8_t *buf) {
int total_size = 1024 * flash->total_size;
int i;
if (total_size > 512 * 1024) {
it8716f_over512k_spi_chip_write(flash, buf);
} else {
for (i = 0; i < total_size / 256; i++) {
generic_spi_page_program(i, buf, (uint8_t *)flash->virtual_memory);
}
}
return 0;
}