Go to file
Subrata Banik 3c838c7399 soc/intel/skylake: Remove pch_enable_dev() from SoC
PCI resources MMIO space/bus master enabling is handled inside
pch_dev_enable_resources() from common device code. Hence
no need to have an explicit soc function to do the same.

TEST=lspci from kernel console shows same pci device list
without and without this patch.

Change-Id: I005e486dd435e9c61ae3f5dfe3ff0e8f688d16e1
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/22755
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-08 02:43:18 +00:00
3rdparty 3rdparty/lib{hwbase,gfxinit}: Update to latest master 2017-10-28 19:46:17 +00:00
Documentation Documentation/Intel/vboot: Remove double word *after* 2017-11-14 15:27:46 +00:00
configs configs: Add intel/harcuvar FSP 2.0 sample configuration 2017-10-04 02:56:33 +00:00
payloads libpayload: Add pci_free_dev() and some boilerplate 2017-12-07 21:51:24 +00:00
src soc/intel/skylake: Remove pch_enable_dev() from SoC 2017-12-08 02:43:18 +00:00
util buildgcc: Hide stderr output of getopt test 2017-12-07 21:56:44 +00:00
.checkpatch.conf .checkpatch.conf: Ignore CORRUPTED_PATCH lint 2017-10-29 10:11:58 +00:00
.clang-format
.gitignore .gitignore: Do not track `util/cbfstool/cbfs-compression-tool` 2017-11-03 15:20:40 +00:00
.gitmodules Set up 3rdparty/libgfxinit 2016-10-29 01:35:03 +02:00
.gitreview
COPYING
MAINTAINERS MAINTAINERS: add maintainers for all PC Engines mainboards 2017-10-31 15:45:53 +00:00
Makefile build system: Deal with wildcard in subdirs-y 2017-10-29 08:48:54 +00:00
Makefile.inc Kconfig: Remove BOARD_ID_MANUAL option 2017-12-06 23:27:03 +00:00
README README: Update requirements 2017-06-27 17:04:32 +00:00
gnat.adc gnat.adc: Do not generate assertion code for Refined_Post 2016-10-29 01:33:31 +02:00
toolchain.inc toolchain: Always use GCC for Ada sources 2017-09-23 10:57:40 +00:00

README

-------------------------------------------------------------------------------
coreboot README
-------------------------------------------------------------------------------

coreboot is a Free Software project aimed at replacing the proprietary BIOS
(firmware) found in most computers.  coreboot performs a little bit of
hardware initialization and then executes additional boot logic, called a
payload.

With the separation of hardware initialization and later boot logic,
coreboot can scale from specialized applications that run directly
firmware, run operating systems in flash, load custom
bootloaders, or implement firmware standards, like PC BIOS services or
UEFI. This allows for systems to only include the features necessary
in the target application, reducing the amount of code and flash space
required.

coreboot was formerly known as LinuxBIOS.


Payloads
--------

After the basic initialization of the hardware has been performed, any
desired "payload" can be started by coreboot.

See https://www.coreboot.org/Payloads for a list of supported payloads.


Supported Hardware
------------------

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

 * https://www.coreboot.org/Supported_Motherboards
 * https://www.coreboot.org/Supported_Chipsets_and_Devices


Build Requirements
------------------

 * make
 * gcc / g++
   Because Linux distribution compilers tend to use lots of patches. coreboot
   does lots of "unusual" things in its build system, some of which break due
   to those patches, sometimes by gcc aborting, sometimes - and that's worse -
   by generating broken object code.
   Two options: use our toolchain (eg. make crosstools-i386) or enable the
   ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this
   case).
 * iasl (for targets with ACPI support)
 * pkg-config
 * libssl-dev (openssl)

Optional:

 * doxygen (for generating/viewing documentation)
 * gdb (for better debugging facilities on some targets)
 * ncurses (for 'make menuconfig' and 'make nconfig')
 * flex and bison (for regenerating parsers)


Building coreboot
-----------------

Please consult https://www.coreboot.org/Build_HOWTO for details.


Testing coreboot Without Modifying Your Hardware
------------------------------------------------

If you want to test coreboot without any risks before you really decide
to use it on your hardware, you can use the QEMU system emulator to run
coreboot virtually in QEMU.

Please see https://www.coreboot.org/QEMU for details.


Website and Mailing List
------------------------

Further details on the project, a FAQ, many HOWTOs, news, development
guidelines and more can be found on the coreboot website:

  https://www.coreboot.org

You can contact us directly on the coreboot mailing list:

  https://www.coreboot.org/Mailinglist


Copyright and License
---------------------

The copyright on coreboot is owned by quite a large number of individual
developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL).
Some files are licensed under the "GPL (version 2, or any later version)",
and some files are licensed under the "GPL, version 2". For some parts, which
were derived from other projects, other (GPL-compatible) licenses may apply.
Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.