coreboot-kgpe-d16/util/superiotool/fintek.c

149 lines
4.6 KiB
C

/*
* This file is part of the superiotool project.
*
* Copyright (C) 2006 coresystems GmbH <info@coresystems.de>
* Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "superiotool.h"
#define DEVICE_ID_BYTE1_REG 0x20
#define DEVICE_ID_BYTE2_REG 0x21
#define VENDOR_ID_BYTE1_REG 0x23
#define VENDOR_ID_BYTE2_REG 0x24
#define FINTEK_VENDOR_ID 0x3419
static const struct superio_registers reg_table[] = {
{0x0106, "F71862FG", {
{EOT}}},
{0x4103, "F71872F/FG / F71806F/FG", { /* Same ID? Datasheet typo? */
{EOT}}},
{0x4105, "F71882FG/F71883FG", { /* Same ID? Datasheet typo? */
/* We assume reserved bits are read as 0. */
{NOLDN, NULL,
{0x20,0x21,0x23,0x24,0x25,0x26,0x27,0x28,0x29,0x2a,
0x2b,0x2c,0x2d,EOT},
{0x05,0x41,0x19,0x34,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x08,0x08,EOT}},
{0x0, "Floppy",
{0x30,0x60,0x61,0x70,0x74,0xf0,0xf2,0xf4,EOT},
{0x01,0x03,0xf0,0x06,0x02,0x0e,0x03,0x00,EOT}},
{0x1, "COM1",
{0x30,0x60,0x61,0x70,0xf0,EOT},
{0x01,0x03,0xf8,0x04,0x00,EOT}},
{0x2, "COM2",
{0x30,0x60,0x61,0x70,0xf0,0xf1,EOT},
{0x01,0x02,0xf8,0x03,0x00,0x04,EOT}},
{0x3, "Parallel port",
{0x30,0x60,0x61,0x70,0x74,0xf0,EOT},
{0x01,0x03,0x78,0x07,0x03,0x42,EOT}},
{0x4, "Hardware monitor",
{0x30,0x60,0x61,0x70,EOT},
{0x01,0x02,0x95,0x00,EOT}},
{0x5, "Keyboard",
{0x30,0x60,0x61,0x70,0x72,0xf0,EOT},
{0x01,0x00,0x60,0x00,0x00,0x83,EOT}},
{0x6, "GPIO",
{0x70,0xe0,0xe1,0xe2,0xe3,0xd0,0xd1,0xd2,0xd3,0xc0,
0xc1,0xc2,0xc3,0xb0,0xb1,0xb2,0xb3,0xf0,0xf1,0xf2,
0xf3,EOT},
{0x00,0x00,0xff,NANA,0x00,0x00,0xff,NANA,0x00,0x00,
0x0f,NANA,0x00,0x00,0x0f,NANA,0x00,0x00,0xff,NANA,
0x00,EOT}},
{0x7, "VID",
{0x30,0x60,0x61,EOT},
{0x00,0x00,0x00,EOT}},
{0x7, "SPI",
{0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7,0xf8,0xfa,
0xfb,0xfc,0xfd,0xfe,0xff,EOT},
{0x10,0x04,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,EOT}},
{0xa, "PME, ACPI",
{0x30,0xf0,0xf1,0xf4,0xf5,EOT},
{0x00,0x00,0x01,0x06,0x1c,EOT}},
{EOT}}},
{0x0604, "F71805F/FG", {
/* We assume reserved bits are read as 0. */
{NOLDN, NULL,
{0x20,0x21,0x23,0x24,0x25,0x26,0x27,0x28,0x29,EOT},
{0x04,0x06,0x19,0x34,0x00,0x00,0x3f,0x08,0x00,EOT}},
{0x0, "Floppy",
{0x30,0x60,0x61,0x70,0x74,0xf0,0xf2,0xf4,EOT},
{0x01,0x03,0xf0,0x06,0x02,0x0e,0x03,0x00,EOT}},
{0x1, "COM1",
{0x30,0x60,0x61,0x70,0xf0,EOT},
{0x01,0x03,0xf8,0x04,0x00,EOT}},
{0x2, "COM2",
{0x30,0x60,0x61,0x70,0xf0,0xf1,EOT},
{0x01,0x02,0xf8,0x03,0x00,0x04,EOT}},
{0x3, "Parallel port",
{0x30,0x60,0x61,0x70,0x74,0xf0,EOT},
{0x01,0x03,0x78,0x07,0x03,0x42,EOT}},
{0x4, "Hardware monitor",
{0x30,0x60,0x61,0x70,EOT},
{0x00,0x02,0x95,0x00,EOT}},
{0x6, "GPIO",
{0x70,0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,0xe8,
0xe9,0xf0,0xf1,0xf3,0xf4,EOT},
{0x00,0x00,0x00,NANA,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,NANA,0x00,NANA,EOT}},
{0xa, "PME",
{0x30,0xf0,0xf1,EOT},
{0x00,0x00,0x00,EOT}},
{EOT}}},
{0x0581, "F8000", { /* Fintek/ASUS F8000 */
{EOT}}},
{EOT}
};
void probe_idregs_fintek(uint16_t port)
{
uint16_t vid, did;
probing_for("Fintek", "", port);
enter_conf_mode_winbond_fintek_ite_8787(port);
did = regval(port, DEVICE_ID_BYTE1_REG);
did |= (regval(port, DEVICE_ID_BYTE2_REG) << 8);
vid = regval(port, VENDOR_ID_BYTE1_REG);
vid |= (regval(port, VENDOR_ID_BYTE2_REG) << 8);
if (vid != FINTEK_VENDOR_ID || superio_unknown(reg_table, did)) {
if (verbose)
printf(NOTFOUND "vid=0x%04x, id=0x%04x\n", vid, did);
exit_conf_mode_winbond_fintek_ite_8787(port);
return;
}
printf("Found Fintek %s (vid=0x%04x, id=0x%04x) at 0x%x\n",
get_superio_name(reg_table, did), vid, did, port);
chip_found = 1;
dump_superio("Fintek", reg_table, port, did);
exit_conf_mode_winbond_fintek_ite_8787(port);
}
void print_fintek_chips(void)
{
print_vendor_chips("Fintek", reg_table);
}