coreboot-kgpe-d16/util/nvramtool
Paul Kocialkowski 826713ff61 nvramtool: Add dummy cmos-hw-unix accessor implementation for non-x86
The default implementation uses inb/outb, that is not available on ARM
platforms and others. A dummy implementation allows building nvramtool
on these platforms.

Change-Id: I75e4a1a0cbd35ca40f7b108658686839ccf9784a
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/22562
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-12-09 16:56:09 +00:00
..
accessors nvramtool: Add dummy cmos-hw-unix accessor implementation for non-x86 2017-12-09 16:56:09 +00:00
cli Use www.coreboot.org over coreboot.org 2017-06-07 12:05:44 +02:00
COPYING
ChangeLog
DISCLAIMER Use more secure HTTPS URLs for coreboot sites 2017-06-07 12:04:50 +02:00
Makefile util/*: don't strip executables 2017-10-29 08:48:56 +00:00
Makefile.inc
README Use more secure HTTPS URLs for coreboot sites 2017-06-07 12:04:50 +02:00
cbfs.c
cbfs.h
cmos_lowlevel.c Use more secure HTTPS URLs for coreboot sites 2017-06-07 12:04:50 +02:00
cmos_lowlevel.h Use more secure HTTPS URLs for coreboot sites 2017-06-07 12:04:50 +02:00
cmos_ops.c util: change coreboot to lowercase 2017-06-27 18:26:01 +00:00
cmos_ops.h Use more secure HTTPS URLs for coreboot sites 2017-06-07 12:04:50 +02:00
common.c Use more secure HTTPS URLs for coreboot sites 2017-06-07 12:04:50 +02:00
common.h Use more secure HTTPS URLs for coreboot sites 2017-06-07 12:04:50 +02:00
compute_ip_checksum.c Use more secure HTTPS URLs for coreboot sites 2017-06-07 12:04:50 +02:00
coreboot_tables.h Use more secure HTTPS URLs for coreboot sites 2017-06-07 12:04:50 +02:00
hexdump.c
hexdump.h
input_file.c Use more secure HTTPS URLs for coreboot sites 2017-06-07 12:04:50 +02:00
input_file.h Use more secure HTTPS URLs for coreboot sites 2017-06-07 12:04:50 +02:00
ip_checksum.h Use more secure HTTPS URLs for coreboot sites 2017-06-07 12:04:50 +02:00
layout.c Use more secure HTTPS URLs for coreboot sites 2017-06-07 12:04:50 +02:00
layout.h Use more secure HTTPS URLs for coreboot sites 2017-06-07 12:04:50 +02:00
lbtable.c util: change coreboot to lowercase 2017-06-27 18:26:01 +00:00
lbtable.h Use more secure HTTPS URLs for coreboot sites 2017-06-07 12:04:50 +02:00
nvramtool.spec
reg_expr.c Use more secure HTTPS URLs for coreboot sites 2017-06-07 12:04:50 +02:00
reg_expr.h Use more secure HTTPS URLs for coreboot sites 2017-06-07 12:04:50 +02:00
win32mmap.c

README

Summary of Operation
--------------------
nvramtool is a utility for reading/writing coreboot parameters and
displaying information from the coreboot table.  It is intended for x86-based
systems (both 32-bit and 64-bit) that use coreboot.

The coreboot table resides in low physical memory, and may be accessed
through the /dev/mem interface.  It is created at boot time by coreboot, and
contains various system information such as the type of mainboard in use.  It
specifies locations in the CMOS (nonvolatile RAM) where the coreboot
parameters are stored.

For information about coreboot, see https://www.coreboot.org/.

Ideas for Future Improvements
-----------------------------
1.  Move the core functionality of this program into a shared library.
2.  Consider adding options for displaying other BIOS-provided information
    such as the MP table, ACPI table, PCI IRQ routing table, etc.