Go to file
Jeremy Compostella 5b8987ae46 libpayload: Support unaligned pointer for memcpy, memmove and memcmp
The memcpy(), memmove() and memcmp() functions use word by word
operations regardless of the pointer alignment.  Depending on the
platform, this could lead to a crash.

This patch makes the memcpy(), memmove() or memcmp() operate byte per
byte if they are supplied with unaligned pointers.

Change-Id: I0b668739b7b58d47266f10f2dff2dc9cbf38577e
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/20535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-07-13 18:16:15 +00:00
3rdparty 3rdparty/chromeec: Update submodule to upstream master 2017-06-27 16:06:31 +00:00
Documentation Documentation: change coreboot to lowercase 2017-06-12 04:06:40 +02:00
configs configs: Add intel/galileo test configurations 2017-06-20 18:10:47 +02:00
payloads libpayload: Support unaligned pointer for memcpy, memmove and memcmp 2017-07-13 18:16:15 +00:00
src soc/intel/skylake: reduce postcar stack usage for fsp 2.0 2017-07-13 16:49:19 +00:00
util abuild: give --silent the silent treatment 2017-07-11 11:37:14 +00:00
.checkpatch.conf checkpatch.conf: Update rules 2017-03-09 04:37:28 +01:00
.clang-format
.gitignore .gitignore: ignore blobtool binary 2017-05-14 05:08:55 +02:00
.gitmodules Set up 3rdparty/libgfxinit 2016-10-29 01:35:03 +02:00
.gitreview
COPYING
MAINTAINERS MAINTAINERS: Update maintainer address (APLK and FSP 2.0) 2017-07-13 04:49:23 +00:00
Makefile Makefile: update clean-utils & distclean-utils 2017-07-08 19:02:26 +00:00
Makefile.inc Use more secure HTTPS URLs for coreboot sites 2017-06-07 12:04:50 +02:00
README README: Update requirements 2017-06-27 17:04:32 +00:00
gnat.adc gnat.adc: Do not generate assertion code for Refined_Post 2016-10-29 01:33:31 +02:00
toolchain.inc toolchain.inc: Use -Wstack-usage only on gcc 2017-06-19 22:17:01 +02:00

README

-------------------------------------------------------------------------------
coreboot README
-------------------------------------------------------------------------------

coreboot is a Free Software project aimed at replacing the proprietary BIOS
(firmware) found in most computers.  coreboot performs a little bit of
hardware initialization and then executes additional boot logic, called a
payload.

With the separation of hardware initialization and later boot logic,
coreboot can scale from specialized applications that run directly
firmware, run operating systems in flash, load custom
bootloaders, or implement firmware standards, like PC BIOS services or
UEFI. This allows for systems to only include the features necessary
in the target application, reducing the amount of code and flash space
required.

coreboot was formerly known as LinuxBIOS.


Payloads
--------

After the basic initialization of the hardware has been performed, any
desired "payload" can be started by coreboot.

See https://www.coreboot.org/Payloads for a list of supported payloads.


Supported Hardware
------------------

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

 * https://www.coreboot.org/Supported_Motherboards
 * https://www.coreboot.org/Supported_Chipsets_and_Devices


Build Requirements
------------------

 * make
 * gcc / g++
   Because Linux distribution compilers tend to use lots of patches. coreboot
   does lots of "unusual" things in its build system, some of which break due
   to those patches, sometimes by gcc aborting, sometimes - and that's worse -
   by generating broken object code.
   Two options: use our toolchain (eg. make crosstools-i386) or enable the
   ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this
   case).
 * iasl (for targets with ACPI support)
 * pkg-config
 * libssl-dev (openssl)

Optional:

 * doxygen (for generating/viewing documentation)
 * gdb (for better debugging facilities on some targets)
 * ncurses (for 'make menuconfig' and 'make nconfig')
 * flex and bison (for regenerating parsers)


Building coreboot
-----------------

Please consult https://www.coreboot.org/Build_HOWTO for details.


Testing coreboot Without Modifying Your Hardware
------------------------------------------------

If you want to test coreboot without any risks before you really decide
to use it on your hardware, you can use the QEMU system emulator to run
coreboot virtually in QEMU.

Please see https://www.coreboot.org/QEMU for details.


Website and Mailing List
------------------------

Further details on the project, a FAQ, many HOWTOs, news, development
guidelines and more can be found on the coreboot website:

  https://www.coreboot.org

You can contact us directly on the coreboot mailing list:

  https://www.coreboot.org/Mailinglist


Copyright and License
---------------------

The copyright on coreboot is owned by quite a large number of individual
developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL).
Some files are licensed under the "GPL (version 2, or any later version)",
and some files are licensed under the "GPL, version 2". For some parts, which
were derived from other projects, other (GPL-compatible) licenses may apply.
Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.