5e19fa4c51
This is x86 "standard" 0xcf9 reset mechanism. Change-Id: Ieb48290b21a7cb1425881fdd65c794e96da0248f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5680 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
129 lines
3.8 KiB
C
129 lines
3.8 KiB
C
/*
|
|
* This file is part of the coreboot project.
|
|
*
|
|
* Copyright (C) 2011 Advanced Micro Devices, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
#include "agesawrapper.h"
|
|
#include "amdlib.h"
|
|
#include "BiosCallOuts.h"
|
|
#include "Ids.h"
|
|
#include "OptionsIds.h"
|
|
#include "heapManager.h"
|
|
#include <northbridge/amd/agesa/family15/dimmSpd.h>
|
|
#include <arch/io.h>
|
|
|
|
#ifdef __PRE_RAM__
|
|
/* These defines are used to select the appropriate socket for the SPD read
|
|
* because this is a multi-socket design.
|
|
*/
|
|
#define PCI_REG_GPIO_56_to_53_CNTRL (0x52)
|
|
#define GPIO_OUT_BIT_GPIO53 (BIT0)
|
|
#define GPIO_OUT_BIT_GPIO54 (BIT1)
|
|
#define GPIO_OUT_ENABLE_BIT_GPIO53 (BIT4)
|
|
#define GPIO_OUT_ENABLE_BIT_GPIO54 (BIT5)
|
|
|
|
#define GPIO_OUT_BIT_GPIO54_to_53_MASK \
|
|
(GPIO_OUT_BIT_GPIO54 | GPIO_OUT_BIT_GPIO53)
|
|
#define GPIO_OUT_ENABLE_BIT_GPIO54_to_53_MASK \
|
|
(GPIO_OUT_ENABLE_BIT_GPIO54 | GPIO_OUT_ENABLE_BIT_GPIO53)
|
|
|
|
static UINT8 select_socket(UINT8 socket_id)
|
|
{
|
|
device_t sm_dev = PCI_DEV(0, 0x14, 0); //SMBus
|
|
UINT8 value = 0;
|
|
UINT8 gpio56_to_53 = 0;
|
|
|
|
/* Configure GPIO54,53 to select the desired socket
|
|
* GPIO54,53 control the HC4052 S1,S0
|
|
* S1 S0 true table
|
|
* 0 0 channel 1 (Socket1)
|
|
* 0 1 channel 2 (Socket2)
|
|
* 1 0 channel 3 (Socket3)
|
|
* 1 1 channel 4 (Socket4)
|
|
*/
|
|
gpio56_to_53 = pci_read_config8(sm_dev, PCI_REG_GPIO_56_to_53_CNTRL);
|
|
value = gpio56_to_53 & (~GPIO_OUT_BIT_GPIO54_to_53_MASK);
|
|
value |= socket_id;
|
|
value &= (~GPIO_OUT_ENABLE_BIT_GPIO54_to_53_MASK); // 0=Output Enabled, 1=Tristate
|
|
pci_write_config8(sm_dev, PCI_REG_GPIO_56_to_53_CNTRL, value);
|
|
|
|
return gpio56_to_53;
|
|
}
|
|
|
|
static void restore_socket(UINT8 original_value)
|
|
{
|
|
device_t sm_dev = PCI_DEV(0, 0x14, 0); //SMBus
|
|
pci_write_config8(sm_dev, PCI_REG_GPIO_56_to_53_CNTRL, original_value);
|
|
}
|
|
#endif
|
|
|
|
STATIC BIOS_CALLOUT_STRUCT BiosCallouts[] =
|
|
{
|
|
{AGESA_ALLOCATE_BUFFER, BiosAllocateBuffer },
|
|
{AGESA_DEALLOCATE_BUFFER, BiosDeallocateBuffer },
|
|
{AGESA_LOCATE_BUFFER, BiosLocateBuffer },
|
|
{AGESA_DO_RESET, agesa_Reset },
|
|
{AGESA_READ_SPD, BiosReadSpd },
|
|
{AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported },
|
|
{AGESA_RUNFUNC_ONAP, BiosRunFuncOnAp },
|
|
{AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData },
|
|
{AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess },
|
|
{AGESA_HOOKBEFORE_DRAM_INIT, agesa_NoopSuccess },
|
|
{AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess },
|
|
};
|
|
|
|
AGESA_STATUS GetBiosCallout (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
|
|
{
|
|
UINTN i;
|
|
AGESA_STATUS CalloutStatus;
|
|
UINTN CallOutCount = sizeof (BiosCallouts) / sizeof (BiosCallouts [0]);
|
|
|
|
for (i = 0; i < CallOutCount; i++) {
|
|
if (BiosCallouts[i].CalloutName == Func) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
if(i >= CallOutCount) {
|
|
return AGESA_UNSUPPORTED;
|
|
}
|
|
|
|
CalloutStatus = BiosCallouts[i].CalloutPtr (Func, Data, ConfigPtr);
|
|
|
|
return CalloutStatus;
|
|
}
|
|
|
|
AGESA_STATUS BiosReadSpd (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
|
|
{
|
|
AGESA_STATUS Status;
|
|
#ifdef __PRE_RAM__
|
|
UINT8 original_value = 0;
|
|
|
|
if (ConfigPtr == NULL)
|
|
return AGESA_ERROR;
|
|
|
|
original_value = select_socket(((AGESA_READ_SPD_PARAMS *)ConfigPtr)->SocketId);
|
|
|
|
Status = agesa_ReadSPD (Func, Data, ConfigPtr);
|
|
|
|
restore_socket(original_value);
|
|
#else
|
|
Status = AGESA_UNSUPPORTED;
|
|
#endif
|
|
|
|
return Status;
|
|
}
|