Go to file
Werner Zeh 686018988c drivers/pc80/mc146818rtc: Check date and time for sanity
There are cases where the RTC_VRT bit in register D stays set after a
power failure while the real date and time registers can contain rubbish
values (can happen when RTC is not buffered). If we do not detect this
invalid date and/or time here and keep it, Linux will use these bad
values for the initial timekeeper init. This in turn can lead to dates
before 1970 in user land which can break a lot assumptions.

To fix this, check date and time sanity when the RTC is initialized and
reset the values if needed.

Change-Id: I5bc600c78bab50c70372600347f63156df127012
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54914
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-30 20:28:14 +00:00
3rdparty Update vboot submodule to upstream main 2021-05-30 20:18:08 +00:00
Documentation Documentation: Fix up toctree 2021-05-28 17:58:06 +00:00
LICENSES treewide: Remove trailing whitespace 2021-02-17 17:30:05 +00:00
configs tpm: Remove USER_TPMx options, make TPM1/TPM2 menuconfig visible 2021-05-27 22:01:44 +00:00
payloads option: Turn CMOS option backend into choice 2021-05-28 11:37:16 +00:00
src drivers/pc80/mc146818rtc: Check date and time for sanity 2021-05-30 20:28:14 +00:00
tests tests/lib/memset-test: Add missing malloc check and free on error 2021-05-26 12:33:25 +00:00
util util/cbfstool/fit.c: Fix getting the topswap table 2021-05-27 14:38:34 +00:00
.checkpatch.conf lint: checkpatch: Only exclude specific src/vendorcode/ subdirectories 2021-04-06 16:04:41 +00:00
.clang-format
.editorconfig
.gitignore
.gitmodules .gitmodules: update vboot submodule to track branch=main 2021-04-28 16:33:07 +00:00
.gitreview
AUTHORS
COPYING
MAINTAINERS mb/asus/p8z77-m_pro: Transform into variant 2021-05-20 17:49:39 +00:00
Makefile tests: improve code coverage support 2021-05-19 19:56:02 +00:00
Makefile.inc option: Introduce `CMOS_LAYOUT_FILE` Kconfig symbol 2021-05-18 11:43:49 +00:00
README.md
gnat.adc
toolchain.inc toolchain.inc: Update and fix the test-toolchain target 2021-02-24 11:29:39 +00:00

README.md

coreboot README

coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.

With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.

coreboot was formerly known as LinuxBIOS.

Payloads

After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.

See https://www.coreboot.org/Payloads for a list of supported payloads.

Supported Hardware

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

Build Requirements

  • make
  • gcc / g++ Because Linux distribution compilers tend to use lots of patches. coreboot does lots of "unusual" things in its build system, some of which break due to those patches, sometimes by gcc aborting, sometimes - and that's worse - by generating broken object code. Two options: use our toolchain (eg. make crosstools-i386) or enable the ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this case).
  • iasl (for targets with ACPI support)
  • pkg-config
  • libssl-dev (openssl)

Optional:

  • doxygen (for generating/viewing documentation)
  • gdb (for better debugging facilities on some targets)
  • ncurses (for make menuconfig and make nconfig)
  • flex and bison (for regenerating parsers)

Building coreboot

Please consult https://www.coreboot.org/Build_HOWTO for details.

Testing coreboot Without Modifying Your Hardware

If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.

Please see https://www.coreboot.org/QEMU for details.

Website and Mailing List

Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:

https://www.coreboot.org

You can contact us directly on the coreboot mailing list:

https://www.coreboot.org/Mailinglist

The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.