Go to file
Duncan Laurie 695f2feaf8 soc/intel/cannonlake: Fix I2C clock input
The input clock for the I2C controllers was set at 133MHz but should
really be 216MHz according to the kernel:

https://patchwork.kernel.org/patch/10408729/
"Intel Cannon Lake PCH has much higher 216 MHz input clock to LPSS I2C
than Sunrisepoint which uses 120 MHz. Preliminary information was that
both share the same clock rate but actual silicon implements elevated
rate for better support for 3.4 MHz high-speed I2C."

This change was tested on a sarien board where an I2C trackpad that was
measuring ~700MHz on I2C and is now measuring ~380MHz.

Change-Id: I792d1f013da5538a2b8157e2f99b754ca7b6bf70
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/30061
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-07 11:18:43 +00:00
3rdparty 3rdparty/blobs: Add new blob 2018-11-28 20:25:20 +00:00
Documentation Documentation/flash_tutorial/index.md: warn about dots painted on ICs 2018-12-05 14:10:12 +00:00
configs soc/intel/apollolake: Add reset code to postcar stage 2018-10-23 07:11:31 +00:00
payloads libpayload: Remove unused timer/serial drivers 2018-12-05 14:07:17 +00:00
src soc/intel/cannonlake: Fix I2C clock input 2018-12-07 11:18:43 +00:00
util util/scripts/maintainers.go: file: queries are more stable with quotes 2018-12-05 15:21:21 +00:00
.checkpatch.conf .checkpatch.conf: Ignore a few more warnings 2018-08-13 12:23:24 +00:00
.clang-format clang-format: change it to better match our style 2018-07-31 23:25:29 +00:00
.gitignore util/bucts: Add tool to manipulate BUC.TS bit on Intel targets 2018-11-19 08:19:16 +00:00
.gitmodules submodules: add FSP mirror as non-default submodule 2018-09-02 03:07:50 +00:00
.gitreview add .gitreview 2012-11-01 23:13:39 +01:00
COPYING
MAINTAINERS MAINTAINERS: Add myself as a maintainer for boards I've ported 2018-12-06 11:26:56 +00:00
Makefile Makefile: Enable DELETE_ON_ERROR for all targets 2018-08-08 21:57:07 +00:00
Makefile.inc broadcom: Remove SoC and board support 2018-11-30 10:26:37 +00:00
README.md README: Convert to Markdown 2018-09-16 13:01:58 +00:00
gnat.adc gnat.adc: Do not generate assertion code for Refined_Post 2016-10-29 01:33:31 +02:00
toolchain.inc arch/power8: Rename to ppc64 2018-11-30 20:02:17 +00:00

README.md

coreboot README

coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.

With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.

coreboot was formerly known as LinuxBIOS.

Payloads

After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.

See https://www.coreboot.org/Payloads for a list of supported payloads.

Supported Hardware

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

Build Requirements

  • make
  • gcc / g++ Because Linux distribution compilers tend to use lots of patches. coreboot does lots of "unusual" things in its build system, some of which break due to those patches, sometimes by gcc aborting, sometimes - and that's worse - by generating broken object code. Two options: use our toolchain (eg. make crosstools-i386) or enable the ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this case).
  • iasl (for targets with ACPI support)
  • pkg-config
  • libssl-dev (openssl)

Optional:

  • doxygen (for generating/viewing documentation)
  • gdb (for better debugging facilities on some targets)
  • ncurses (for make menuconfig and make nconfig)
  • flex and bison (for regenerating parsers)

Building coreboot

Please consult https://www.coreboot.org/Build_HOWTO for details.

Testing coreboot Without Modifying Your Hardware

If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.

Please see https://www.coreboot.org/QEMU for details.

Website and Mailing List

Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:

https://www.coreboot.org

You can contact us directly on the coreboot mailing list:

https://www.coreboot.org/Mailinglist

The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.