510 lines
13 KiB
C
510 lines
13 KiB
C
#define HAVE_STRING_SUPPORT 1
|
|
#define HAVE_CAST_SUPPORT 1
|
|
#define HAVE_STATIC_ARRAY_SUPPORT 1
|
|
#define HAVE_POINTER_SUPPORT 1
|
|
#define HAVE_CONSTANT_PROPOGATION 0
|
|
#define CALCULATE_DRB_REG 1
|
|
|
|
void outb(unsigned char value, unsigned short port)
|
|
{
|
|
__builtin_outb(value, port);
|
|
}
|
|
|
|
void outw(unsigned short value, unsigned short port)
|
|
{
|
|
__builtin_outw(value, port);
|
|
}
|
|
|
|
void outl(unsigned int value, unsigned short port)
|
|
{
|
|
__builtin_outl(value, port);
|
|
}
|
|
|
|
unsigned char inb(unsigned short port)
|
|
{
|
|
return __builtin_inb(port);
|
|
}
|
|
|
|
unsigned char inw(unsigned short port)
|
|
{
|
|
return __builtin_inw(port);
|
|
}
|
|
|
|
unsigned char inl(unsigned short port)
|
|
{
|
|
return __builtin_inl(port);
|
|
}
|
|
|
|
static unsigned int config_cmd(unsigned char bus, unsigned devfn, unsigned where)
|
|
{
|
|
return 0x80000000 | (bus << 16) | (devfn << 8) | (where & ~3);
|
|
}
|
|
|
|
static unsigned char pcibios_read_config_byte(
|
|
unsigned char bus, unsigned devfn, unsigned where)
|
|
{
|
|
outl(config_cmd(bus, devfn, where), 0xCF8);
|
|
return inb(0xCFC + (where & 3));
|
|
}
|
|
|
|
static unsigned short pcibios_read_config_word(
|
|
unsigned char bus, unsigned devfn, unsigned where)
|
|
{
|
|
outl(config_cmd(bus, devfn, where), 0xCF8);
|
|
return inw(0xCFC + (where & 2));
|
|
}
|
|
|
|
static unsigned int pcibios_read_config_dword(
|
|
unsigned char bus, unsigned devfn, unsigned where)
|
|
{
|
|
outl(config_cmd(bus, devfn, where), 0xCF8);
|
|
return inl(0xCFC);
|
|
}
|
|
|
|
|
|
static void pcibios_write_config_byte(
|
|
unsigned char bus, unsigned devfn, unsigned where, unsigned char value)
|
|
{
|
|
outl(config_cmd(bus, devfn, where), 0xCF8);
|
|
outb(value, 0xCFC + (where & 3));
|
|
}
|
|
|
|
static void pcibios_write_config_word(
|
|
unsigned char bus, unsigned devfn, unsigned where, unsigned short value)
|
|
{
|
|
outl(config_cmd(bus, devfn, where), 0xCF8);
|
|
outw(value, 0xCFC + (where & 2));
|
|
}
|
|
|
|
static void pcibios_write_config_dword(
|
|
unsigned char bus, unsigned devfn, unsigned where, unsigned int value)
|
|
{
|
|
outl(config_cmd(bus, devfn, where), 0xCF8);
|
|
outl(value, 0xCFC);
|
|
}
|
|
|
|
int log2(int value)
|
|
{
|
|
/* __builtin_bsr is a exactly equivalent to the x86 machine
|
|
* instruction with the exception that it returns -1
|
|
* when the value presented to it is zero.
|
|
* Otherwise __builtin_bsr returns the zero based index of
|
|
* the highest bit set.
|
|
*/
|
|
return __builtin_bsr(value);
|
|
}
|
|
|
|
|
|
/* Base Address */
|
|
#ifndef CONFIG_TTYS0_BASE
|
|
#define CONFIG_TTYS0_BASE 0x3f8
|
|
#endif
|
|
|
|
#ifndef CONFIG_TTYS0_BAUD
|
|
#define CONFIG_TTYS0_BAUD 115200
|
|
#endif
|
|
|
|
#if ((115200%CONFIG_TTYS0_BAUD) != 0)
|
|
#error Bad ttys0 baud rate
|
|
#endif
|
|
|
|
#define CONFIG_TTYS0_DIV (115200/CONFIG_TTYS0_BAUD)
|
|
|
|
/* Line Control Settings */
|
|
#ifndef CONFIG_TTYS0_LCS
|
|
/* Set 8bit, 1 stop bit, no parity */
|
|
#define CONFIG_TTYS0_LCS 0x3
|
|
#endif
|
|
|
|
#define UART_LCS CONFIG_TTYS0_LCS
|
|
|
|
/* Data */
|
|
#define UART_RBR 0x00
|
|
#define UART_TBR 0x00
|
|
|
|
/* Control */
|
|
#define UART_IER 0x01
|
|
#define UART_IIR 0x02
|
|
#define UART_FCR 0x02
|
|
#define UART_LCR 0x03
|
|
#define UART_MCR 0x04
|
|
#define UART_DLL 0x00
|
|
#define UART_DLM 0x01
|
|
|
|
/* Status */
|
|
#define UART_LSR 0x05
|
|
#define UART_MSR 0x06
|
|
#define UART_SCR 0x07
|
|
|
|
int uart_can_tx_byte(void)
|
|
{
|
|
return inb(CONFIG_TTYS0_BASE + UART_LSR) & 0x20;
|
|
}
|
|
|
|
void uart_wait_to_tx_byte(void)
|
|
{
|
|
while(!uart_can_tx_byte())
|
|
;
|
|
}
|
|
|
|
void uart_wait_until_sent(void)
|
|
{
|
|
while(!(inb(CONFIG_TTYS0_BASE + UART_LSR) & 0x40))
|
|
;
|
|
}
|
|
|
|
void uart_tx_byte(unsigned char data)
|
|
{
|
|
uart_wait_to_tx_byte();
|
|
outb(data, CONFIG_TTYS0_BASE + UART_TBR);
|
|
/* Make certain the data clears the fifos */
|
|
uart_wait_until_sent();
|
|
}
|
|
|
|
void uart_init(void)
|
|
{
|
|
/* disable interrupts */
|
|
outb(0x0, CONFIG_TTYS0_BASE + UART_IER);
|
|
/* enable fifo's */
|
|
outb(0x01, CONFIG_TTYS0_BASE + UART_FCR);
|
|
/* Set Baud Rate Divisor to 12 ==> 115200 Baud */
|
|
outb(0x80 | UART_LCS, CONFIG_TTYS0_BASE + UART_LCR);
|
|
outb(CONFIG_TTYS0_DIV & 0xFF, CONFIG_TTYS0_BASE + UART_DLL);
|
|
outb((CONFIG_TTYS0_DIV >> 8) & 0xFF, CONFIG_TTYS0_BASE + UART_DLM);
|
|
outb(UART_LCS, CONFIG_TTYS0_BASE + UART_LCR);
|
|
}
|
|
|
|
void __console_tx_char(unsigned char byte)
|
|
{
|
|
uart_tx_byte(byte);
|
|
}
|
|
void __console_tx_nibble(unsigned nibble)
|
|
{
|
|
unsigned char digit;
|
|
digit = nibble + '0';
|
|
if (digit > '9') {
|
|
digit += 39;
|
|
}
|
|
__console_tx_char(digit);
|
|
}
|
|
void __console_tx_hex8(unsigned char byte)
|
|
{
|
|
__console_tx_nibble(byte >> 4);
|
|
__console_tx_nibble(byte & 0x0f);
|
|
}
|
|
|
|
void __console_tx_hex32(unsigned char value)
|
|
{
|
|
__console_tx_nibble((value >> 28) & 0x0f);
|
|
__console_tx_nibble((value >> 24) & 0x0f);
|
|
__console_tx_nibble((value >> 20) & 0x0f);
|
|
__console_tx_nibble((value >> 16) & 0x0f);
|
|
__console_tx_nibble((value >> 12) & 0x0f);
|
|
__console_tx_nibble((value >> 8) & 0x0f);
|
|
__console_tx_nibble((value >> 4) & 0x0f);
|
|
__console_tx_nibble(value & 0x0f);
|
|
}
|
|
|
|
#if HAVE_STRING_SUPPORT
|
|
void __console_tx_string(char *str)
|
|
{
|
|
unsigned char ch;
|
|
while((ch = *str++) != '\0') {
|
|
__console_tx_char(ch);
|
|
}
|
|
}
|
|
#else
|
|
void __console_tx_string(char *str)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
|
|
void print_emerg_char(unsigned char byte) { __console_tx_char(byte); }
|
|
void print_emerg_hex8(unsigned char value) { __console_tx_hex8(value); }
|
|
void print_emerg_hex32(unsigned int value) { __console_tx_hex32(value); }
|
|
void print_emerg(char *str) { __console_tx_string(str); }
|
|
|
|
void print_alert_char(unsigned char byte) { __console_tx_char(byte); }
|
|
void print_alert_hex8(unsigned char value) { __console_tx_hex8(value); }
|
|
void print_alert_hex32(unsigned int value) { __console_tx_hex32(value); }
|
|
void print_alert(char *str) { __console_tx_string(str); }
|
|
|
|
void print_crit_char(unsigned char byte) { __console_tx_char(byte); }
|
|
void print_crit_hex8(unsigned char value) { __console_tx_hex8(value); }
|
|
void print_crit_hex32(unsigned int value) { __console_tx_hex32(value); }
|
|
void print_crit(char *str) { __console_tx_string(str); }
|
|
|
|
void print_err_char(unsigned char byte) { __console_tx_char(byte); }
|
|
void print_err_hex8(unsigned char value) { __console_tx_hex8(value); }
|
|
void print_err_hex32(unsigned int value) { __console_tx_hex32(value); }
|
|
void print_err(char *str) { __console_tx_string(str); }
|
|
|
|
void print_warning_char(unsigned char byte) { __console_tx_char(byte); }
|
|
void print_warning_hex8(unsigned char value) { __console_tx_hex8(value); }
|
|
void print_warning_hex32(unsigned int value) { __console_tx_hex32(value); }
|
|
void print_warning(char *str) { __console_tx_string(str); }
|
|
|
|
void print_notice_char(unsigned char byte) { __console_tx_char(byte); }
|
|
void print_notice_hex8(unsigned char value) { __console_tx_hex8(value); }
|
|
void print_notice_hex32(unsigned int value) { __console_tx_hex32(value); }
|
|
void print_notice(char *str) { __console_tx_string(str); }
|
|
|
|
void print_info_char(unsigned char byte) { __console_tx_char(byte); }
|
|
void print_info_hex8(unsigned char value) { __console_tx_hex8(value); }
|
|
void print_info_hex32(unsigned int value) { __console_tx_hex32(value); }
|
|
void print_info(char *str) { __console_tx_string(str); }
|
|
|
|
void print_debug_char(unsigned char byte) { __console_tx_char(byte); }
|
|
void print_debug_hex8(unsigned char value) { __console_tx_hex8(value); }
|
|
void print_debug_hex32(unsigned int value) { __console_tx_hex32(value); }
|
|
void print_debug(char *str) { __console_tx_string(str); }
|
|
|
|
void print_spew_char(unsigned char byte) { __console_tx_char(byte); }
|
|
void print_spew_hex8(unsigned char value) { __console_tx_hex8(value); }
|
|
void print_spew_hex32(unsigned int value) { __console_tx_hex32(value); }
|
|
void print_spew(char *str) { __console_tx_string(str); }
|
|
|
|
#define PIIX4_DEVFN 0x90
|
|
#define SMBUS_MEM_DEVICE_START 0x50
|
|
#define SMBUS_MEM_DEVICE_END 0x53
|
|
#define SMBUS_MEM_DEVICE_INC 1
|
|
|
|
|
|
#define PM_BUS 0
|
|
#define PM_DEVFN (PIIX4_DEVFN+3)
|
|
|
|
#if HAVE_CONSTANT_PROPOGATION
|
|
#define SMBUS_IO_BASE 0x1000
|
|
#define SMBHSTSTAT 0
|
|
#define SMBHSTCTL 2
|
|
#define SMBHSTCMD 3
|
|
#define SMBHSTADD 4
|
|
#define SMBHSTDAT0 5
|
|
#define SMBHSTDAT1 6
|
|
#define SMBBLKDAT 7
|
|
|
|
static void smbus_wait_until_ready(void)
|
|
{
|
|
while((inb(SMBUS_IO_BASE + SMBHSTSTAT) & 1) == 1) {
|
|
/* nop */
|
|
}
|
|
}
|
|
|
|
static void smbus_wait_until_done(void)
|
|
{
|
|
unsigned char byte;
|
|
do {
|
|
byte = inb(SMBUS_IO_BASE + SMBHSTSTAT);
|
|
}while((byte &1) == 1);
|
|
while( (byte & ~1) == 0) {
|
|
byte = inb(SMBUS_IO_BASE + SMBHSTSTAT);
|
|
}
|
|
}
|
|
|
|
int smbus_read_byte(unsigned device, unsigned address)
|
|
{
|
|
unsigned char host_status_register;
|
|
unsigned char byte;
|
|
int result;
|
|
|
|
smbus_wait_until_ready();
|
|
|
|
/* setup transaction */
|
|
/* disable interrupts */
|
|
outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL);
|
|
/* set the device I'm talking too */
|
|
outb(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBHSTADD);
|
|
/* set the command/address... */
|
|
outb(address & 0xFF, SMBUS_IO_BASE + SMBHSTCMD);
|
|
/* set up for a byte data read */
|
|
outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xE3) | (0x2 << 2), SMBUS_IO_BASE + SMBHSTCTL);
|
|
|
|
/* clear any lingering errors, so the transaction will run */
|
|
outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
|
|
|
|
/* clear the data byte...*/
|
|
outb(0, SMBUS_IO_BASE + SMBHSTDAT0);
|
|
|
|
/* start the command */
|
|
outb((inb(SMBUS_IO_BASE + SMBHSTCTL) | 0x40), SMBUS_IO_BASE + SMBHSTCTL);
|
|
|
|
/* poll for transaction completion */
|
|
smbus_wait_until_done();
|
|
|
|
host_status_register = inb(SMBUS_IO_BASE + SMBHSTSTAT);
|
|
|
|
/* read results of transaction */
|
|
byte = inb(SMBUS_IO_BASE + SMBHSTDAT0);
|
|
|
|
result = byte;
|
|
if (host_status_register != 0x02) {
|
|
result = -1;
|
|
}
|
|
return result;
|
|
}
|
|
|
|
#else /* !HAVE_CONSTANT_PROPOGATION */
|
|
|
|
#define SMBUS_IO_HSTSTAT 0x1000
|
|
#define SMBUS_IO_HSTCTL 0x1002
|
|
#define SMBUS_IO_HSTCMD 0x1003
|
|
#define SMBUS_IO_HSTADD 0x1004
|
|
#define SMBUS_IO_HSTDAT0 0x1005
|
|
#define SMBUS_IO_HSTDAT1 0x1006
|
|
#define SMBUS_IO_HSTBLKDAT 0x1007
|
|
|
|
|
|
static void smbus_wait_until_ready(void)
|
|
{
|
|
while((inb(SMBUS_IO_HSTSTAT) & 1) == 1) {
|
|
/* nop */
|
|
}
|
|
}
|
|
|
|
static void smbus_wait_until_done(void)
|
|
{
|
|
unsigned char byte;
|
|
do {
|
|
byte = inb(SMBUS_IO_HSTSTAT);
|
|
}while((byte &1) == 1);
|
|
while( (byte & ~1) == 0) {
|
|
byte = inb(SMBUS_IO_HSTSTAT);
|
|
}
|
|
}
|
|
|
|
short smbus_read_byte(unsigned char device, unsigned char address)
|
|
{
|
|
unsigned char host_status_register;
|
|
short result;
|
|
|
|
smbus_wait_until_ready();
|
|
|
|
/* setup transaction */
|
|
/* disable interrupts */
|
|
outb(inb(SMBUS_IO_HSTCTL) & (~1), SMBUS_IO_HSTCTL);
|
|
/* set the device I'm talking too */
|
|
outb(((device & 0x7f) << 1) | 1, SMBUS_IO_HSTADD);
|
|
/* set the command/address... */
|
|
outb(address & 0xFF, SMBUS_IO_HSTCMD);
|
|
/* set up for a byte data read */
|
|
outb((inb(SMBUS_IO_HSTCTL) & 0xE3) | 8, SMBUS_IO_HSTCTL);
|
|
|
|
/* clear any lingering errors, so the transaction will run */
|
|
outb(inb(SMBUS_IO_HSTSTAT), SMBUS_IO_HSTSTAT);
|
|
|
|
/* clear the data byte...*/
|
|
outb(0, SMBUS_IO_HSTDAT0);
|
|
|
|
/* start the command */
|
|
outb((inb(SMBUS_IO_HSTCTL) | 0x40), SMBUS_IO_HSTCTL);
|
|
|
|
/* poll for transaction completion */
|
|
smbus_wait_until_done();
|
|
|
|
host_status_register = inb(SMBUS_IO_HSTSTAT);
|
|
|
|
/* read results of transaction */
|
|
result = inb(SMBUS_IO_HSTDAT0);
|
|
|
|
if (host_status_register != 0x02) {
|
|
result = -1;
|
|
}
|
|
return result;
|
|
}
|
|
#endif /* HAVE_CONSTANT_PROPOGATION */
|
|
|
|
#define I440GX_BUS 0
|
|
#define I440GX_DEVFN ((0x00 << 3) + 0)
|
|
|
|
|
|
static void spd_set_drb(void)
|
|
{
|
|
/*
|
|
* Effects: Uses serial presence detect to set the
|
|
* DRB registers which holds the ending memory address assigned
|
|
* to each DIMM.
|
|
*/
|
|
unsigned end_of_memory;
|
|
unsigned char device;
|
|
unsigned char drb_reg;
|
|
|
|
end_of_memory = 0; /* in multiples of 8MiB */
|
|
device = SMBUS_MEM_DEVICE_START;
|
|
#if !CALCULATE_DRB_REG
|
|
drb_reg = 0x60;
|
|
#endif
|
|
while (device <= SMBUS_MEM_DEVICE_END) {
|
|
unsigned side1_bits, side2_bits;
|
|
int byte, byte2;
|
|
|
|
side1_bits = side2_bits = -1;
|
|
|
|
/* rows */
|
|
byte = smbus_read_byte(device, 3);
|
|
if (byte >= 0) {
|
|
side1_bits += byte & 0xf;
|
|
|
|
/* columns */
|
|
byte = smbus_read_byte(device, 4);
|
|
side1_bits += byte & 0xf;
|
|
|
|
/* banks */
|
|
byte = smbus_read_byte(device, 17);
|
|
side1_bits += log2(byte);
|
|
|
|
/* Get the module data width and convert it to a power of two */
|
|
/* low byte */
|
|
byte = smbus_read_byte(device, 6);
|
|
|
|
/* high byte */
|
|
byte2 = smbus_read_byte(device, 7);
|
|
#if HAVE_CAST_SUPPORT
|
|
side1_bits += log2((((unsigned long)byte2 << 8)| byte));
|
|
#else
|
|
side1_bits += log2((((byte2 << 8) | byte));
|
|
#endif
|
|
|
|
/* now I have the ram size in bits as a power of two (less 1) */
|
|
/* Make it mulitples of 8MB */
|
|
side1_bits -= 25;
|
|
|
|
/* side two */
|
|
|
|
/* number of physical banks */
|
|
byte = smbus_read_byte(device, 5);
|
|
if (byte > 1) {
|
|
/* for now only handle the symmetrical case */
|
|
side2_bits = side1_bits;
|
|
}
|
|
}
|
|
|
|
/* Compute the end address for the DRB register */
|
|
/* Only process dimms < 2GB (2^8 * 8MB) */
|
|
if (side1_bits < 8) {
|
|
end_of_memory += (1 << side1_bits);
|
|
}
|
|
#if CALCULATE_DRB_REG
|
|
drb_reg = ((device - SMBUS_MEM_DEVICE_START) << 1) + 0x60;
|
|
#endif
|
|
|
|
#if HAVE_STRING_SUPPORT
|
|
print_debug("end_of_memory: "); print_debug_hex32(end_of_memory); print_debug("\n");
|
|
#endif
|
|
pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, drb_reg, end_of_memory);
|
|
|
|
if (side2_bits < 8 ) {
|
|
end_of_memory += (1 << side2_bits);
|
|
}
|
|
#if HAVE_STRING_SUPPORT
|
|
print_debug("end_of_memory: "); print_debug_hex32(end_of_memory); print_debug("\n");
|
|
#endif
|
|
pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, drb_reg +1, end_of_memory);
|
|
|
|
#if !CALCULATE_DRB_REG
|
|
drb_reg += 2;
|
|
#endif
|
|
device += SMBUS_MEM_DEVICE_INC;
|
|
}
|
|
}
|