1a62150709
Set power limits in devicetree for Tiger Lake Y-SKU based volteer variant boards. BUG=b:152639350 BRANCH=None TEST=Built and tested power limits on volteer variant board. Change-Id: If4f1226473b48365e5962df9fff29910c99007fc Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43607 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
114 lines
3 KiB
C
114 lines
3 KiB
C
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
|
|
/*
|
|
* This file is created based on Intel Tiger Lake Processor SA Datasheet
|
|
* Document number: 571131
|
|
* Chapter number: 3
|
|
*/
|
|
|
|
#include <console/console.h>
|
|
#include <device/device.h>
|
|
#include <delay.h>
|
|
#include <device/pci.h>
|
|
#include <device/pci_ids.h>
|
|
#include <device/pci_ops.h>
|
|
#include <intelblocks/power_limit.h>
|
|
#include <intelblocks/systemagent.h>
|
|
#include <soc/iomap.h>
|
|
#include <soc/soc_chip.h>
|
|
#include <soc/systemagent.h>
|
|
|
|
/*
|
|
* SoC implementation
|
|
*
|
|
* Add all known fixed memory ranges for Host Controller/Memory
|
|
* controller.
|
|
*/
|
|
void soc_add_fixed_mmio_resources(struct device *dev, int *index)
|
|
{
|
|
static const struct sa_mmio_descriptor soc_fixed_resources[] = {
|
|
{ PCIEXBAR, CONFIG_MMCONF_BASE_ADDRESS, CONFIG_SA_PCIEX_LENGTH,
|
|
"PCIEXBAR" },
|
|
{ MCHBAR, MCH_BASE_ADDRESS, MCH_BASE_SIZE, "MCHBAR" },
|
|
{ DMIBAR, DMI_BASE_ADDRESS, DMI_BASE_SIZE, "DMIBAR" },
|
|
{ EPBAR, EP_BASE_ADDRESS, EP_BASE_SIZE, "EPBAR" },
|
|
{ REGBAR, REG_BASE_ADDRESS, REG_BASE_SIZE, "REGBAR" },
|
|
{ EDRAMBAR, EDRAM_BASE_ADDRESS, EDRAM_BASE_SIZE, "EDRAMBAR" },
|
|
};
|
|
|
|
sa_add_fixed_mmio_resources(dev, index, soc_fixed_resources,
|
|
ARRAY_SIZE(soc_fixed_resources));
|
|
|
|
/* Add Vt-d resources if VT-d is enabled */
|
|
if ((pci_read_config32(dev, CAPID0_A) & VTD_DISABLE))
|
|
return;
|
|
|
|
sa_add_fixed_mmio_resources(dev, index, soc_vtd_resources,
|
|
ARRAY_SIZE(soc_vtd_resources));
|
|
}
|
|
|
|
/*
|
|
* SoC implementation
|
|
*
|
|
* Perform System Agent Initialization during Ramstage phase.
|
|
*/
|
|
void soc_systemagent_init(struct device *dev)
|
|
{
|
|
struct soc_power_limits_config *soc_config;
|
|
struct device *sa;
|
|
uint16_t sa_pci_id;
|
|
config_t *config;
|
|
|
|
/* Get System Agent PCI ID */
|
|
sa = pcidev_path_on_root(SA_DEVFN_ROOT);
|
|
sa_pci_id = sa ? pci_read_config16(sa, PCI_DEVICE_ID) : 0xFFFF;
|
|
|
|
/* Enable Power Aware Interrupt Routing */
|
|
enable_power_aware_intr();
|
|
|
|
/* Enable BIOS Reset CPL */
|
|
enable_bios_reset_cpl();
|
|
|
|
/* Configure turbo power limits 1ms after reset complete bit */
|
|
mdelay(1);
|
|
config = config_of_soc();
|
|
|
|
/*
|
|
* Choose a power limits configuration based on the SoC SKU,
|
|
* differentiated here based on SA PCI ID.
|
|
*/
|
|
switch (sa_pci_id) {
|
|
case PCI_DEVICE_ID_INTEL_TGL_ID_U_2_2:
|
|
soc_config = &config->power_limits_config[POWER_LIMITS_U_2_CORE];
|
|
break;
|
|
case PCI_DEVICE_ID_INTEL_TGL_ID_U_4_2:
|
|
soc_config = &config->power_limits_config[POWER_LIMITS_U_4_CORE];
|
|
break;
|
|
case PCI_DEVICE_ID_INTEL_TGL_ID_Y_2_2:
|
|
soc_config = &config->power_limits_config[POWER_LIMITS_Y_2_CORE];
|
|
break;
|
|
case PCI_DEVICE_ID_INTEL_TGL_ID_Y_4_2:
|
|
soc_config = &config->power_limits_config[POWER_LIMITS_Y_4_CORE];
|
|
break;
|
|
default:
|
|
printk(BIOS_ERR, "TGL: unknown SA ID: 0x%4x, skipping power limits "
|
|
"configuration\n", sa_pci_id);
|
|
return;
|
|
}
|
|
|
|
set_power_limits(MOBILE_SKU_PL1_TIME_SEC, soc_config);
|
|
}
|
|
|
|
uint32_t soc_systemagent_max_chan_capacity_mib(u8 capid0_a_ddrsz)
|
|
{
|
|
switch (capid0_a_ddrsz) {
|
|
case 1:
|
|
return 8192;
|
|
case 2:
|
|
return 4096;
|
|
case 3:
|
|
return 2048;
|
|
default:
|
|
return 65536;
|
|
}
|
|
}
|