91 lines
2.0 KiB
C
91 lines
2.0 KiB
C
/* Should support 8250, 16450, 16550, 16550A type uarts */
|
|
#include <arch/io.h>
|
|
#include <uart8250.h>
|
|
|
|
/* Data */
|
|
#define UART_RBR 0x00
|
|
#define UART_TBR 0x00
|
|
|
|
/* Control */
|
|
#define UART_IER 0x01
|
|
#define UART_IIR 0x02
|
|
#define UART_FCR 0x02
|
|
#define UART_LCR 0x03
|
|
#define UART_MCR 0x04
|
|
#define UART_DLL 0x00
|
|
#define UART_DLM 0x01
|
|
|
|
/* Status */
|
|
#define UART_LSR 0x05
|
|
#define UART_MSR 0x06
|
|
#define UART_SCR 0x07
|
|
|
|
static inline int uart8250_can_tx_byte(unsigned base_port)
|
|
{
|
|
return inb(base_port + UART_LSR) & 0x20;
|
|
}
|
|
|
|
static inline void uart8250_wait_to_tx_byte(unsigned base_port)
|
|
{
|
|
while(!uart8250_can_tx_byte(base_port))
|
|
;
|
|
}
|
|
|
|
static inline void uart8250_wait_until_sent(unsigned base_port)
|
|
{
|
|
while(!(inb(base_port + UART_LSR) & 0x40))
|
|
;
|
|
}
|
|
|
|
void uart8250_tx_byte(unsigned base_port, unsigned char data)
|
|
{
|
|
uart8250_wait_to_tx_byte(base_port);
|
|
outb(data, base_port + UART_TBR);
|
|
/* Make certain the data clears the fifos */
|
|
uart8250_wait_until_sent(base_port);
|
|
}
|
|
|
|
int uart8250_can_rx_byte(unsigned base_port)
|
|
{
|
|
return inb(base_port + UART_LSR) & 0x01;
|
|
}
|
|
|
|
unsigned char uart8250_rx_byte(unsigned base_port)
|
|
{
|
|
while(!uart8250_can_rx_byte(base_port))
|
|
;
|
|
return inb(base_port + UART_RBR);
|
|
}
|
|
|
|
void uart8250_init(unsigned base_port, unsigned divisor, unsigned lcs)
|
|
{
|
|
lcs &= 0x7f;
|
|
/* disable interrupts */
|
|
outb(0x0, base_port + UART_IER);
|
|
/* enable fifo's */
|
|
outb(0x01, base_port + UART_FCR);
|
|
/* assert DTR and RTS so the other end is happy */
|
|
outb(0x03, base_port + UART_MCR);
|
|
/* Set Baud Rate Divisor to 12 ==> 115200 Baud */
|
|
outb(0x80 | lcs, base_port + UART_LCR);
|
|
outb(divisor & 0xFF, base_port + UART_DLL);
|
|
outb((divisor >> 8) & 0xFF, base_port + UART_DLM);
|
|
outb(lcs, base_port + UART_LCR);
|
|
}
|
|
|
|
/* Initialize a generic uart */
|
|
void init_uart8250(unsigned base_port, struct uart8250 *uart)
|
|
{
|
|
int divisor;
|
|
int lcs;
|
|
divisor = 115200/(uart->baud ? uart->baud: 1);
|
|
lcs = 3;
|
|
if (base_port == TTYS0_BASE) {
|
|
/* Don't reinitialize the console serial port,
|
|
* This is espeically nasty in SMP.
|
|
*/
|
|
return;
|
|
}
|
|
uart8250_init(base_port, divisor, lcs);
|
|
}
|