7234d60a6e
This patch combines a few minor fixes and refactoring to the various host controller and root hub drivers to ensure they all do the right thing on a call to usb_exit(). It puts a usb_detach_device(0) call into detach_controller() so that the HCD doesn't need to remember to tear down the root hub itself, and makes sure all root hubs properly detach the subtree of devices connected to their ports first (as generic_hub and by extension XHCI had already been doing). It also fixes up some missing free() calls and replaces most 'ptr = malloc(); if (!ptr) fatal()' idioms with the new x(z)alloc(). BUG=chromium:343415 TEST=Tested EHCI on Big and OHCI, EHCI, and XHCI on Snow. Could not test UHCI (unless anyone volunteers to port coreboot to a ZGB? ;) ), but the changes are really tame. Original-Change-Id: I6eca51ff2685d0946fe4267ad7d3ec48ad7fc510 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/193731 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 5791b546e5a21a360d0c65888a5b92d5f48f8178) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I00138f0aeceb12ed721f7368c7788c9b6bee227d Reviewed-on: http://review.coreboot.org/7222 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
639 lines
16 KiB
C
639 lines
16 KiB
C
/*
|
|
* This file is part of the libpayload project.
|
|
*
|
|
* Copyright (C) 2008-2010 coresystems GmbH
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
//#define USB_DEBUG
|
|
|
|
#include <libpayload-config.h>
|
|
#include <usb/usb.h>
|
|
|
|
#define DR_DESC gen_bmRequestType(device_to_host, standard_type, dev_recp)
|
|
|
|
hci_t *usb_hcs = 0;
|
|
|
|
hci_t *
|
|
new_controller (void)
|
|
{
|
|
hci_t *controller = xzalloc(sizeof (hci_t));
|
|
controller->next = usb_hcs;
|
|
usb_hcs = controller;
|
|
return controller;
|
|
}
|
|
|
|
void
|
|
detach_controller (hci_t *controller)
|
|
{
|
|
if (controller == NULL)
|
|
return;
|
|
|
|
usb_detach_device(controller, 0); /* tear down root hub tree */
|
|
|
|
if (usb_hcs == controller) {
|
|
usb_hcs = controller->next;
|
|
} else {
|
|
hci_t *it = usb_hcs;
|
|
while (it != NULL) {
|
|
if (it->next == controller) {
|
|
it->next = controller->next;
|
|
return;
|
|
}
|
|
it = it->next;
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Shut down all controllers
|
|
*/
|
|
int
|
|
usb_exit (void)
|
|
{
|
|
while (usb_hcs != NULL) {
|
|
usb_hcs->shutdown(usb_hcs);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Polls all hubs on all USB controllers, to find out about device changes
|
|
*/
|
|
void
|
|
usb_poll (void)
|
|
{
|
|
if (usb_hcs == 0)
|
|
return;
|
|
hci_t *controller = usb_hcs;
|
|
while (controller != NULL) {
|
|
int i;
|
|
for (i = 0; i < 128; i++) {
|
|
if (controller->devices[i] != 0) {
|
|
controller->devices[i]->poll (controller->devices[i]);
|
|
}
|
|
}
|
|
controller = controller->next;
|
|
}
|
|
}
|
|
|
|
usbdev_t *
|
|
init_device_entry (hci_t *controller, int i)
|
|
{
|
|
usbdev_t *dev = calloc(1, sizeof(usbdev_t));
|
|
if (!dev) {
|
|
usb_debug("no memory to allocate device structure\n");
|
|
return NULL;
|
|
}
|
|
if (controller->devices[i] != 0)
|
|
usb_debug("warning: device %d reassigned?\n", i);
|
|
controller->devices[i] = dev;
|
|
dev->controller = controller;
|
|
dev->address = -1;
|
|
dev->hub = -1;
|
|
dev->port = -1;
|
|
dev->init = usb_nop_init;
|
|
dev->init (controller->devices[i]);
|
|
return dev;
|
|
}
|
|
|
|
int
|
|
set_feature (usbdev_t *dev, int endp, int feature, int rtype)
|
|
{
|
|
dev_req_t dr;
|
|
|
|
dr.bmRequestType = rtype;
|
|
dr.data_dir = host_to_device;
|
|
dr.bRequest = SET_FEATURE;
|
|
dr.wValue = feature;
|
|
dr.wIndex = endp;
|
|
dr.wLength = 0;
|
|
|
|
return dev->controller->control (dev, OUT, sizeof (dr), &dr, 0, 0);
|
|
}
|
|
|
|
int
|
|
get_status (usbdev_t *dev, int intf, int rtype, int len, void *data)
|
|
{
|
|
dev_req_t dr;
|
|
|
|
dr.bmRequestType = rtype;
|
|
dr.data_dir = device_to_host;
|
|
dr.bRequest = GET_STATUS;
|
|
dr.wValue = 0;
|
|
dr.wIndex = intf;
|
|
dr.wLength = len;
|
|
|
|
return dev->controller->control (dev, IN, sizeof (dr), &dr, len, data);
|
|
}
|
|
|
|
int
|
|
get_descriptor (usbdev_t *dev, int rtype, int descType, int descIdx,
|
|
void *data, size_t len)
|
|
{
|
|
dev_req_t dr;
|
|
|
|
dr.bmRequestType = rtype;
|
|
dr.bRequest = GET_DESCRIPTOR;
|
|
dr.wValue = descType << 8 | descIdx;
|
|
dr.wIndex = 0;
|
|
dr.wLength = len;
|
|
|
|
return dev->controller->control (dev, IN, sizeof (dr), &dr, len, data);
|
|
}
|
|
|
|
int
|
|
set_configuration (usbdev_t *dev)
|
|
{
|
|
dev_req_t dr;
|
|
|
|
dr.bmRequestType = 0;
|
|
dr.bRequest = SET_CONFIGURATION;
|
|
dr.wValue = dev->configuration->bConfigurationValue;
|
|
dr.wIndex = 0;
|
|
dr.wLength = 0;
|
|
|
|
return dev->controller->control (dev, OUT, sizeof (dr), &dr, 0, 0);
|
|
}
|
|
|
|
int
|
|
clear_feature (usbdev_t *dev, int endp, int feature, int rtype)
|
|
{
|
|
dev_req_t dr;
|
|
|
|
dr.bmRequestType = rtype;
|
|
dr.data_dir = host_to_device;
|
|
dr.bRequest = CLEAR_FEATURE;
|
|
dr.wValue = feature;
|
|
dr.wIndex = endp;
|
|
dr.wLength = 0;
|
|
|
|
return dev->controller->control (dev, OUT, sizeof (dr), &dr, 0, 0) < 0;
|
|
}
|
|
|
|
int
|
|
clear_stall (endpoint_t *ep)
|
|
{
|
|
int ret = clear_feature (ep->dev, ep->endpoint, ENDPOINT_HALT,
|
|
gen_bmRequestType (host_to_device, standard_type, endp_recp));
|
|
ep->toggle = 0;
|
|
return ret;
|
|
}
|
|
|
|
/* returns free address or -1 */
|
|
static int
|
|
get_free_address (hci_t *controller)
|
|
{
|
|
int i;
|
|
for (i = 1; i < 128; i++) {
|
|
if (controller->devices[i] == 0)
|
|
return i;
|
|
}
|
|
usb_debug ("no free address found\n");
|
|
return -1; // no free address
|
|
}
|
|
|
|
int
|
|
usb_decode_mps0(usb_speed speed, u8 bMaxPacketSize0)
|
|
{
|
|
switch (speed) {
|
|
case LOW_SPEED:
|
|
if (bMaxPacketSize0 != 8) {
|
|
usb_debug("Invalid MPS0: 0x%02x\n", bMaxPacketSize0);
|
|
bMaxPacketSize0 = 8;
|
|
}
|
|
return bMaxPacketSize0;
|
|
case FULL_SPEED:
|
|
switch (bMaxPacketSize0) {
|
|
case 8: case 16: case 32: case 64:
|
|
return bMaxPacketSize0;
|
|
default:
|
|
usb_debug("Invalid MPS0: 0x%02x\n", bMaxPacketSize0);
|
|
return 8;
|
|
}
|
|
case HIGH_SPEED:
|
|
if (bMaxPacketSize0 != 64) {
|
|
usb_debug("Invalid MPS0: 0x%02x\n", bMaxPacketSize0);
|
|
bMaxPacketSize0 = 64;
|
|
}
|
|
return bMaxPacketSize0;
|
|
case SUPER_SPEED:
|
|
if (bMaxPacketSize0 != 9) {
|
|
usb_debug("Invalid MPS0: 0x%02x\n", bMaxPacketSize0);
|
|
bMaxPacketSize0 = 9;
|
|
}
|
|
return 2 << bMaxPacketSize0;
|
|
default: /* GCC is stupid and cannot deal with enums correctly */
|
|
return 8;
|
|
}
|
|
}
|
|
|
|
/* Normalize bInterval to log2 of microframes */
|
|
static int
|
|
usb_decode_interval(usb_speed speed, const endpoint_type type, const unsigned char bInterval)
|
|
{
|
|
#define LOG2(a) ((sizeof(unsigned) << 3) - __builtin_clz(a) - 1)
|
|
switch (speed) {
|
|
case LOW_SPEED:
|
|
switch (type) {
|
|
case ISOCHRONOUS: case INTERRUPT:
|
|
return LOG2(bInterval) + 3;
|
|
default:
|
|
return 0;
|
|
}
|
|
case FULL_SPEED:
|
|
switch (type) {
|
|
case ISOCHRONOUS:
|
|
return (bInterval - 1) + 3;
|
|
case INTERRUPT:
|
|
return LOG2(bInterval) + 3;
|
|
default:
|
|
return 0;
|
|
}
|
|
case HIGH_SPEED:
|
|
switch (type) {
|
|
case ISOCHRONOUS: case INTERRUPT:
|
|
return bInterval - 1;
|
|
default:
|
|
return LOG2(bInterval);
|
|
}
|
|
case SUPER_SPEED:
|
|
switch (type) {
|
|
case ISOCHRONOUS: case INTERRUPT:
|
|
return bInterval - 1;
|
|
default:
|
|
return 0;
|
|
}
|
|
default:
|
|
return 0;
|
|
}
|
|
#undef LOG2
|
|
}
|
|
|
|
usbdev_t *
|
|
generic_set_address (hci_t *controller, usb_speed speed,
|
|
int hubport, int hubaddr)
|
|
{
|
|
int adr = get_free_address (controller); // address to set
|
|
dev_req_t dr;
|
|
|
|
memset (&dr, 0, sizeof (dr));
|
|
dr.data_dir = host_to_device;
|
|
dr.req_type = standard_type;
|
|
dr.req_recp = dev_recp;
|
|
dr.bRequest = SET_ADDRESS;
|
|
dr.wValue = adr;
|
|
dr.wIndex = 0;
|
|
dr.wLength = 0;
|
|
|
|
usbdev_t *dev = init_device_entry(controller, adr);
|
|
if (!dev)
|
|
return NULL;
|
|
|
|
// dummy values for registering the address
|
|
dev->address = 0;
|
|
dev->hub = hubaddr;
|
|
dev->port = hubport;
|
|
dev->speed = speed;
|
|
dev->endpoints[0].dev = dev;
|
|
dev->endpoints[0].endpoint = 0;
|
|
dev->endpoints[0].maxpacketsize = 8;
|
|
dev->endpoints[0].toggle = 0;
|
|
dev->endpoints[0].direction = SETUP;
|
|
dev->endpoints[0].type = CONTROL;
|
|
if (dev->controller->control (dev, OUT, sizeof (dr), &dr, 0, 0) < 0) {
|
|
usb_debug ("set_address failed\n");
|
|
usb_detach_device (controller, adr);
|
|
return NULL;
|
|
}
|
|
mdelay (SET_ADDRESS_MDELAY);
|
|
|
|
u8 buf[8];
|
|
dev->address = adr;
|
|
if (get_descriptor (dev, DR_DESC, DT_DEV, 0, buf, sizeof(buf))
|
|
!= sizeof(buf)) {
|
|
usb_debug("first get_descriptor(DT_DEV) failed\n");
|
|
usb_detach_device (controller, adr);
|
|
return NULL;
|
|
}
|
|
dev->endpoints[0].maxpacketsize = usb_decode_mps0(speed, buf[7]);
|
|
|
|
return dev;
|
|
}
|
|
|
|
static int
|
|
set_address (hci_t *controller, usb_speed speed, int hubport, int hubaddr)
|
|
{
|
|
usbdev_t *dev = controller->set_address(controller, speed,
|
|
hubport, hubaddr);
|
|
if (!dev) {
|
|
usb_debug ("set_address failed\n");
|
|
return -1;
|
|
}
|
|
|
|
dev->descriptor = malloc(sizeof(*dev->descriptor));
|
|
if (!dev->descriptor || get_descriptor (dev, DR_DESC, DT_DEV, 0,
|
|
dev->descriptor, sizeof(*dev->descriptor))
|
|
!= sizeof(*dev->descriptor)) {
|
|
usb_debug ("get_descriptor(DT_DEV) failed\n");
|
|
usb_detach_device (controller, dev->address);
|
|
return -1;
|
|
}
|
|
|
|
usb_debug ("* found device (0x%04x:0x%04x, USB %x.%x, MPS0: %d)\n",
|
|
dev->descriptor->idVendor, dev->descriptor->idProduct,
|
|
dev->descriptor->bcdUSB >> 8, dev->descriptor->bcdUSB & 0xff,
|
|
dev->endpoints[0].maxpacketsize);
|
|
dev->quirks = usb_quirk_check(dev->descriptor->idVendor,
|
|
dev->descriptor->idProduct);
|
|
|
|
usb_debug ("device has %d configurations\n",
|
|
dev->descriptor->bNumConfigurations);
|
|
if (dev->descriptor->bNumConfigurations == 0) {
|
|
/* device isn't usable */
|
|
usb_debug ("... no usable configuration!\n");
|
|
usb_detach_device (controller, dev->address);
|
|
return -1;
|
|
}
|
|
|
|
u16 buf[2];
|
|
if (get_descriptor (dev, DR_DESC, DT_CFG, 0, buf, sizeof(buf))
|
|
!= sizeof(buf)) {
|
|
usb_debug ("first get_descriptor(DT_CFG) failed\n");
|
|
usb_detach_device (controller, dev->address);
|
|
return -1;
|
|
}
|
|
dev->configuration = malloc(buf[1]);
|
|
if (!dev->configuration) {
|
|
usb_debug ("could not allocate %d bytes for DT_CFG\n", buf[1]);
|
|
usb_detach_device (controller, dev->address);
|
|
return -1;
|
|
}
|
|
if (get_descriptor (dev, DR_DESC, DT_CFG, 0, dev->configuration,
|
|
buf[1]) != buf[1]) {
|
|
usb_debug ("get_descriptor(DT_CFG) failed\n");
|
|
usb_detach_device (controller, dev->address);
|
|
return -1;
|
|
}
|
|
configuration_descriptor_t *cd = dev->configuration;
|
|
if (cd->wTotalLength != buf[1]) {
|
|
usb_debug ("configuration descriptor size changed, aborting\n");
|
|
usb_detach_device (controller, dev->address);
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* If the device is not well known (ifnum == -1), we use the first
|
|
* interface we encounter, as there was no need to implement something
|
|
* else for the time being. If you need it, see the SetInterface and
|
|
* GetInterface functions in the USB specification and set it yourself.
|
|
*/
|
|
usb_debug ("device has %x interfaces\n", cd->bNumInterfaces);
|
|
int ifnum = usb_interface_check(dev->descriptor->idVendor,
|
|
dev->descriptor->idProduct);
|
|
if (cd->bNumInterfaces > 1 && ifnum < 0)
|
|
usb_debug ("NOTICE: Your device has multiple interfaces and\n"
|
|
"this driver will only use the first one. That may\n"
|
|
"be the wrong choice and cause the device to not\n"
|
|
"work correctly. Please report this case\n"
|
|
"(including the above debugging output) to\n"
|
|
"coreboot@coreboot.org to have the device added to\n"
|
|
"the list of well-known quirks.\n");
|
|
|
|
u8 *end = (void *)dev->configuration + cd->wTotalLength;
|
|
interface_descriptor_t *intf;
|
|
u8 *ptr;
|
|
|
|
/* Find our interface (or the first good one if we don't know) */
|
|
for (ptr = (void *)dev->configuration + sizeof(*cd); ; ptr += ptr[0]) {
|
|
if (ptr + 2 > end || !ptr[0] || ptr + ptr[0] > end) {
|
|
usb_debug ("Couldn't find usable DT_INTF\n");
|
|
usb_detach_device (controller, dev->address);
|
|
return -1;
|
|
}
|
|
if (ptr[1] != DT_INTF)
|
|
continue;
|
|
intf = (void *)ptr;
|
|
if (intf->bLength != sizeof(*intf)) {
|
|
usb_debug ("Skipping broken DT_INTF\n");
|
|
continue;
|
|
}
|
|
if (ifnum >= 0 && intf->bInterfaceNumber != ifnum)
|
|
continue;
|
|
usb_debug ("Interface %d: class 0x%x, sub 0x%x. proto 0x%x\n",
|
|
intf->bInterfaceNumber, intf->bInterfaceClass,
|
|
intf->bInterfaceSubClass, intf->bInterfaceProtocol);
|
|
ptr += sizeof(*intf);
|
|
break;
|
|
}
|
|
|
|
/* Gather up all endpoints belonging to this inteface */
|
|
dev->num_endp = 1;
|
|
for (; ptr + 2 <= end && ptr[0] && ptr + ptr[0] <= end; ptr += ptr[0]) {
|
|
if (ptr[1] == DT_INTF || ptr[1] == DT_CFG ||
|
|
dev->num_endp >= ARRAY_SIZE(dev->endpoints))
|
|
break;
|
|
if (ptr[1] != DT_ENDP)
|
|
continue;
|
|
|
|
endpoint_descriptor_t *desc = (void *)ptr;
|
|
static const char *transfertypes[4] = {
|
|
"control", "isochronous", "bulk", "interrupt"
|
|
};
|
|
usb_debug (" #Endpoint %d (%s), max packet size %x, type %s\n",
|
|
desc->bEndpointAddress & 0x7f,
|
|
(desc->bEndpointAddress & 0x80) ? "in" : "out",
|
|
desc->wMaxPacketSize,
|
|
transfertypes[desc->bmAttributes & 0x3]);
|
|
|
|
endpoint_t *ep = &dev->endpoints[dev->num_endp++];
|
|
ep->dev = dev;
|
|
ep->endpoint = desc->bEndpointAddress;
|
|
ep->toggle = 0;
|
|
ep->maxpacketsize = desc->wMaxPacketSize;
|
|
ep->direction = (desc->bEndpointAddress & 0x80) ? IN : OUT;
|
|
ep->type = desc->bmAttributes & 0x3;
|
|
ep->interval = usb_decode_interval (dev->speed, ep->type,
|
|
desc->bInterval);
|
|
}
|
|
|
|
if ((controller->finish_device_config &&
|
|
controller->finish_device_config(dev)) ||
|
|
set_configuration(dev) < 0) {
|
|
usb_debug ("Could not finalize device configuration\n");
|
|
usb_detach_device (controller, dev->address);
|
|
return -1;
|
|
}
|
|
|
|
int class = dev->descriptor->bDeviceClass;
|
|
if (class == 0)
|
|
class = intf->bInterfaceClass;
|
|
|
|
enum {
|
|
audio_device = 0x01,
|
|
comm_device = 0x02,
|
|
hid_device = 0x03,
|
|
physical_device = 0x05,
|
|
imaging_device = 0x06,
|
|
printer_device = 0x07,
|
|
msc_device = 0x08,
|
|
hub_device = 0x09,
|
|
cdc_device = 0x0a,
|
|
ccid_device = 0x0b,
|
|
security_device = 0x0d,
|
|
video_device = 0x0e,
|
|
healthcare_device = 0x0f,
|
|
diagnostic_device = 0xdc,
|
|
wireless_device = 0xe0,
|
|
misc_device = 0xef,
|
|
};
|
|
usb_debug("Class: ");
|
|
switch (class) {
|
|
case audio_device:
|
|
usb_debug("audio\n");
|
|
break;
|
|
case comm_device:
|
|
usb_debug("communication\n");
|
|
break;
|
|
case hid_device:
|
|
usb_debug ("HID\n");
|
|
#ifdef CONFIG_LP_USB_HID
|
|
dev->init = usb_hid_init;
|
|
return dev->address;
|
|
#else
|
|
usb_debug ("NOTICE: USB HID support not compiled in\n");
|
|
#endif
|
|
break;
|
|
case physical_device:
|
|
usb_debug("physical\n");
|
|
break;
|
|
case imaging_device:
|
|
usb_debug("camera\n");
|
|
break;
|
|
case printer_device:
|
|
usb_debug("printer\n");
|
|
break;
|
|
case msc_device:
|
|
usb_debug ("MSC\n");
|
|
#ifdef CONFIG_LP_USB_MSC
|
|
dev->init = usb_msc_init;
|
|
return dev->address;
|
|
#else
|
|
usb_debug ("NOTICE: USB MSC support not compiled in\n");
|
|
#endif
|
|
break;
|
|
case hub_device:
|
|
if (speed < SUPER_SPEED) {
|
|
usb_debug ("hub (2.0)\n");
|
|
#ifdef CONFIG_LP_USB_HUB
|
|
dev->init = usb_hub_init;
|
|
return dev->address;
|
|
#else
|
|
usb_debug ("NOTICE: USB hub support not compiled in\n");
|
|
#endif
|
|
} else {
|
|
usb_debug ("hub (3.0) - not yet supported!\n");
|
|
}
|
|
break;
|
|
case cdc_device:
|
|
usb_debug("CDC\n");
|
|
break;
|
|
case ccid_device:
|
|
usb_debug("smartcard / CCID\n");
|
|
break;
|
|
case security_device:
|
|
usb_debug("content security\n");
|
|
break;
|
|
case video_device:
|
|
usb_debug("video\n");
|
|
break;
|
|
case healthcare_device:
|
|
usb_debug("healthcare\n");
|
|
break;
|
|
case diagnostic_device:
|
|
usb_debug("diagnostic\n");
|
|
break;
|
|
case wireless_device:
|
|
usb_debug("wireless\n");
|
|
break;
|
|
default:
|
|
usb_debug("unsupported class %x\n", class);
|
|
break;
|
|
}
|
|
dev->init = usb_generic_init;
|
|
return dev->address;
|
|
}
|
|
|
|
/*
|
|
* Should be called by the hub drivers whenever a physical detach occurs
|
|
* and can be called by usb class drivers if they are unsatisfied with a
|
|
* malfunctioning device.
|
|
*/
|
|
void
|
|
usb_detach_device(hci_t *controller, int devno)
|
|
{
|
|
/* check if device exists, as we may have
|
|
been called yet by the usb class driver */
|
|
if (controller->devices[devno]) {
|
|
controller->devices[devno]->destroy (controller->devices[devno]);
|
|
free(controller->devices[devno]);
|
|
controller->devices[devno] = NULL;
|
|
if (controller->destroy_device)
|
|
controller->destroy_device(controller, devno);
|
|
}
|
|
}
|
|
|
|
int
|
|
usb_attach_device(hci_t *controller, int hubaddress, int port, usb_speed speed)
|
|
{
|
|
static const char* speeds[] = { "full", "low", "high", "super" };
|
|
usb_debug ("%sspeed device\n", (speed < sizeof(speeds) / sizeof(char*))
|
|
? speeds[speed] : "invalid value - no");
|
|
int newdev = set_address (controller, speed, port, hubaddress);
|
|
if (newdev == -1)
|
|
return -1;
|
|
usbdev_t *newdev_t = controller->devices[newdev];
|
|
// determine responsible driver - current done in set_address
|
|
newdev_t->init (newdev_t);
|
|
/* init() may have called usb_detach_device() yet, so check */
|
|
return controller->devices[newdev] ? newdev : -1;
|
|
}
|
|
|
|
static void
|
|
usb_generic_destroy (usbdev_t *dev)
|
|
{
|
|
if (usb_generic_remove)
|
|
usb_generic_remove(dev);
|
|
}
|
|
|
|
void
|
|
usb_generic_init (usbdev_t *dev)
|
|
{
|
|
dev->data = NULL;
|
|
dev->destroy = usb_generic_destroy;
|
|
|
|
if (usb_generic_create)
|
|
usb_generic_create(dev);
|
|
}
|