Go to file
Werner Zeh 737c54d4d3 fsp_baytrail: Add macros for legacy GPIO output set up
Up to now the GPIO set up macros for input sets up GPIOs to be
mapped to memory space while macros for outputs sets up GPIOs
to be mapped to legacy io space. This patch adds two additional
macros for legacy output definition and changes the old macros
to memory space mapping.

In addition, the intel/minnowmax mainboard is modified to use
the legacy macros for outputs to ensure this mainboard stays
unchanged in terms of functionality.

TEST=Booted siemens/mc_tcu3 and ensured GPIO set up in linux.

Change-Id: I99e98d31e1a59e63c58d536f2c493d6dcbfd1e75
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/12340
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-11-11 06:42:01 +01:00
3rdparty 3rdparty/vboot: update to current master 2015-10-28 22:28:16 +01:00
Documentation tree: drop last paragraph of GPL copyright header 2015-10-31 21:37:39 +01:00
payloads libpayload/udc: dwc2: Add handler for add_strings 2015-11-10 14:10:39 +01:00
src fsp_baytrail: Add macros for legacy GPIO output set up 2015-11-11 06:42:01 +01:00
util utils/scripts: Add microcode conversion tool 2015-11-10 18:46:04 +01:00
.clang-format Provide coreboot coding style formalisation file for clang-format 2015-11-10 00:49:03 +01:00
.gitignore .gitignore: adapt to new buildgcc version 2015-09-28 20:05:14 +00:00
.gitmodules submodules: add arm-trusted-firmware third-party repository 2015-06-23 08:20:24 +02:00
.gitreview
COPYING
MAINTAINERS MAINTAINERS: Fix format for file entries (F:) 2015-10-22 20:20:48 +02:00
Makefile Add cscope/ctags generation for the current project 2015-07-30 05:21:28 +02:00
Makefile.inc arm64: remove secmon 2015-11-07 03:28:06 +01:00
README README: improve description of compiler requirements 2015-07-30 05:11:33 +02:00
toolchain.inc tree: drop last paragraph of GPL copyright header 2015-10-31 21:37:39 +01:00

README

-------------------------------------------------------------------------------
coreboot README
-------------------------------------------------------------------------------

coreboot is a Free Software project aimed at replacing the proprietary BIOS
(firmware) found in most computers.  coreboot performs a little bit of
hardware initialization and then executes additional boot logic, called a
payload.

With the separation of hardware initialization and later boot logic,
coreboot can scale from specialized applications that run directly
firmware, run operating systems in flash, load custom
bootloaders, or implement firmware standards, like PC BIOS services or
UEFI. This allows for systems to only include the features necessary
in the target application, reducing the amount of code and flash space
required.

coreboot was formerly known as LinuxBIOS.


Payloads
--------

After the basic initialization of the hardware has been performed, any
desired "payload" can be started by coreboot.

See http://www.coreboot.org/Payloads for a list of supported payloads.


Supported Hardware
------------------

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

 * http://www.coreboot.org/Supported_Motherboards
 * http://www.coreboot.org/Supported_Chipsets_and_Devices


Build Requirements
------------------

 * make
 * gcc / g++
   Because Linux distribution compilers tend to use lots of patches. coreboot
   does lots of "unusual" things in its build system, some of which break due
   to those patches, sometimes by gcc aborting, sometimes - and that's worse -
   by generating broken object code.
   Two options: use our toolchain (eg. make crosstools-i386) or enable the
   ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this
   case).
 * iasl (for targets with ACPI support)

Optional:

 * doxygen (for generating/viewing documentation)
 * gdb (for better debugging facilities on some targets)
 * ncurses (for 'make menuconfig' and 'make nconfig')
 * flex and bison (for regenerating parsers)


Building coreboot
-----------------

Please consult http://www.coreboot.org/Build_HOWTO for details.


Testing coreboot Without Modifying Your Hardware
------------------------------------------------

If you want to test coreboot without any risks before you really decide
to use it on your hardware, you can use the QEMU system emulator to run
coreboot virtually in QEMU.

Please see http://www.coreboot.org/QEMU for details.


Website and Mailing List
------------------------

Further details on the project, a FAQ, many HOWTOs, news, development
guidelines and more can be found on the coreboot website:

  http://www.coreboot.org

You can contact us directly on the coreboot mailing list:

  http://www.coreboot.org/Mailinglist


Copyright and License
---------------------

The copyright on coreboot is owned by quite a large number of individual
developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL).
Some files are licensed under the "GPL (version 2, or any later version)",
and some files are licensed under the "GPL, version 2". For some parts, which
were derived from other projects, other (GPL-compatible) licenses may apply.
Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.