Go to file
Paul Kocialkowski 7899db2355 buildgcc: Never set GMP CFLAGS manually in order to get the right flags
When no CFLAGS are explicitly provided to it, the GMP configure script
will figure out the best optimization flags to use on its own. In
particular, it will setup the march, mfpu and mtune flags based on
hardware detection.

However, when CFLAGS are provided, they are used as-is and such
detection doesn't happen. When the march, mfpu and mtune flags are not
provided (which happens when GMP wasn't built already), not only will
related optimizations be disabled, but some code might not build because
of missing support. This happens with NEON instructions on ARMv7 hosts.

Thus, it is better not to set CFLAGS and leave it up to the GMP
configure script to get them right and still reuse those later.

Change-Id: I6ffcbac1298523d1b8ddf29a8bca1b00298828a7
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/15452
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-07-21 11:49:25 +02:00
3rdparty 3rdparty/arm-trusted-firmware: Update to Jun 8, 2016 master 2016-06-12 12:14:06 +02:00
Documentation Documentation: Fix doxygen errors 2016-07-12 22:41:02 +02:00
payloads coreinfo: Add support to read timestamps 2016-07-20 22:09:32 +02:00
src soc/intel/apollolake: Add new Intel HD Graphics Device ID's. 2016-07-21 04:34:09 +02:00
util buildgcc: Never set GMP CFLAGS manually in order to get the right flags 2016-07-21 11:49:25 +02:00
.clang-format
.gitignore .gitignore: add build and libpayload dirs for nvramcui payload 2016-05-03 04:16:45 +02:00
.gitmodules git modules: rename git submodules to avoid hierarchies 2016-02-11 20:55:55 +01:00
.gitreview
COPYING
MAINTAINERS MAINTAINERS: Add myself as tpm support maintainer. 2016-07-07 17:04:29 +02:00
Makefile Makefile: Include config from DOTCONFIG instead of HAVE_DOTCONFIG 2016-07-15 00:06:09 +02:00
Makefile.inc flashmap: Use CONFIG_ROM_SIZE as flash size in flashmap 2016-06-21 17:51:54 +02:00
README
toolchain.inc toolchain.inc: test IASL by version string instead of number 2016-03-04 16:36:25 +01:00

README

-------------------------------------------------------------------------------
coreboot README
-------------------------------------------------------------------------------

coreboot is a Free Software project aimed at replacing the proprietary BIOS
(firmware) found in most computers.  coreboot performs a little bit of
hardware initialization and then executes additional boot logic, called a
payload.

With the separation of hardware initialization and later boot logic,
coreboot can scale from specialized applications that run directly
firmware, run operating systems in flash, load custom
bootloaders, or implement firmware standards, like PC BIOS services or
UEFI. This allows for systems to only include the features necessary
in the target application, reducing the amount of code and flash space
required.

coreboot was formerly known as LinuxBIOS.


Payloads
--------

After the basic initialization of the hardware has been performed, any
desired "payload" can be started by coreboot.

See http://www.coreboot.org/Payloads for a list of supported payloads.


Supported Hardware
------------------

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

 * http://www.coreboot.org/Supported_Motherboards
 * http://www.coreboot.org/Supported_Chipsets_and_Devices


Build Requirements
------------------

 * make
 * gcc / g++
   Because Linux distribution compilers tend to use lots of patches. coreboot
   does lots of "unusual" things in its build system, some of which break due
   to those patches, sometimes by gcc aborting, sometimes - and that's worse -
   by generating broken object code.
   Two options: use our toolchain (eg. make crosstools-i386) or enable the
   ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this
   case).
 * iasl (for targets with ACPI support)

Optional:

 * doxygen (for generating/viewing documentation)
 * gdb (for better debugging facilities on some targets)
 * ncurses (for 'make menuconfig' and 'make nconfig')
 * flex and bison (for regenerating parsers)


Building coreboot
-----------------

Please consult http://www.coreboot.org/Build_HOWTO for details.


Testing coreboot Without Modifying Your Hardware
------------------------------------------------

If you want to test coreboot without any risks before you really decide
to use it on your hardware, you can use the QEMU system emulator to run
coreboot virtually in QEMU.

Please see http://www.coreboot.org/QEMU for details.


Website and Mailing List
------------------------

Further details on the project, a FAQ, many HOWTOs, news, development
guidelines and more can be found on the coreboot website:

  http://www.coreboot.org

You can contact us directly on the coreboot mailing list:

  http://www.coreboot.org/Mailinglist


Copyright and License
---------------------

The copyright on coreboot is owned by quite a large number of individual
developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL).
Some files are licensed under the "GPL (version 2, or any later version)",
and some files are licensed under the "GPL, version 2". For some parts, which
were derived from other projects, other (GPL-compatible) licenses may apply.
Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.