Go to file
Bruce Griffith 79f47cf8c0 mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC
Create a new mainboard based on the AMD DB-FT3 development board
(Olive Hill) using an AMD Steppe Eagle processor.  The actual DB-FT3
and DB-FT3b mainboards are identical except for the soldered-down
SoC device.  The new AMD DB-FT3b development board (Olive Hill+)
features:

	* Mini-ITX form factor
	* 2x DisplayPort
	* 1x VGA
	* Integrated Realtek RTL8111-compatible Ethernet
	* 2x USB 3.0 ports
	* 2x USB 2.0 externally-accessible ports
	* 2x USB 2.0 internally-accessible ports (via headers)
	* micro LPC header
	* Integrated platform security processor
	* 2x Full-size DDR3 DIMM support (1 channel)
	* Realtek ALC272 HD audio
	* 2x SATA ports
	* 1x SD card slot
	* 1x PCIe (x4) slot
	* 1x mini-PCIe slot
	* 8-pin programming header

Eliminate the extraneous headers included in PlatformGnbPcie.

BiosCallOuts normally has a bunch of extraneous references to the
mainboard name.  Rather than correct the spelling of a bunch of
instances, just get rid of them.

For the most part, use the Olive Hill ACPI definitions since the
DB-FT3b board ("Olive Hill+") and Olive Hill are the same board
with different processors.

Change some function prototypes for functions without parameters
to void instead of AGESA's VOID.  There are no parameters for
these functions, so there is no real reason to use VOID.

S3 and fan control are not supported.  HD audio is not working.

Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/6681
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-09-04 23:53:56 +02:00
3rdparty@f37e0e64ac AMD Steppe Eagle: Update reference to BLOBs repo (3rdparty) 2014-09-01 00:37:16 +02:00
documentation Documentation: Use correct file name for the build guide in the Makefile 2014-07-04 19:03:10 +02:00
payloads build: add what-jenkins-does target 2014-09-04 18:30:17 +02:00
src mainboard: Add AMD DB-FT3b (Olive Hill+) with Steppe Eagle SoC 2014-09-04 23:53:56 +02:00
util cbfstool:linux_trampoline: config CS and DS segment descriptors 2014-09-04 23:34:32 +02:00
.gitignore .gitignore: add 3 executables that can be built in util/ 2014-08-11 06:26:01 +02:00
.gitmodules gitmodules: Fix 3rdparty updates 2013-06-28 00:56:43 +02:00
.gitreview add .gitreview 2012-11-01 23:13:39 +01:00
COPYING
Makefile build system: avoid warning about missing .xcompile 2014-07-20 19:51:10 +02:00
Makefile.inc build: add what-jenkins-does target 2014-09-04 18:30:17 +02:00
README
toolchain.inc coreboot classes: Add dynamic classes to coreboot 2014-08-11 15:42:20 +02:00

README

-------------------------------------------------------------------------------
coreboot README
-------------------------------------------------------------------------------

coreboot is a Free Software project aimed at replacing the proprietary BIOS
(firmware) found in most computers.  coreboot performs a little bit of
hardware initialization and then executes additional boot logic, called a
payload.

With the separation of hardware initialization and later boot logic,
coreboot can scale from specialized applications that run directly
firmware, run operating systems in flash, load custom
bootloaders, or implement firmware standards, like PC BIOS services or
UEFI. This allows for systems to only include the features necessary
in the target application, reducing the amount of code and flash space
required.

coreboot was formerly known as LinuxBIOS.


Payloads
--------

After the basic initialization of the hardware has been performed, any
desired "payload" can be started by coreboot.

See http://www.coreboot.org/Payloads for a list of supported payloads.


Supported Hardware
------------------

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

 * http://www.coreboot.org/Supported_Motherboards
 * http://www.coreboot.org/Supported_Chipsets_and_Devices


Build Requirements
------------------

 * gcc / g++
 * make

Optional:

 * doxygen (for generating/viewing documentation)
 * iasl (for targets with ACPI support)
 * gdb (for better debugging facilities on some targets)
 * ncurses (for 'make menuconfig')
 * flex and bison (for regenerating parsers)


Building coreboot
-----------------

Please consult http://www.coreboot.org/Build_HOWTO for details.


Testing coreboot Without Modifying Your Hardware
------------------------------------------------

If you want to test coreboot without any risks before you really decide
to use it on your hardware, you can use the QEMU system emulator to run
coreboot virtually in QEMU.

Please see http://www.coreboot.org/QEMU for details.


Website and Mailing List
------------------------

Further details on the project, a FAQ, many HOWTOs, news, development
guidelines and more can be found on the coreboot website:

  http://www.coreboot.org

You can contact us directly on the coreboot mailing list:

  http://www.coreboot.org/Mailinglist


Copyright and License
---------------------

The copyright on coreboot is owned by quite a large number of individual
developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL).
Some files are licensed under the "GPL (version 2, or any later version)",
and some files are licensed under the "GPL, version 2". For some parts, which
were derived from other projects, other (GPL-compatible) licenses may apply.
Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.