coreboot-kgpe-d16/util/nvramtool
Julius Werner 0057262b38 cbfs: Rename TYPE_FIT to TYPE_FIT_PAYLOAD
There are too many "FIT" in firmware land. In order to reduce possible
confusion of CBFS_TYPE_FIT with the Intel Firmware Interface Table, this
patch renames it to CBFS_TYPE_FIT_PAYLOAD (including the cbfstool
argument, so calling scripts will now need to replace `-t fit` with `-t
fit_payload`).

Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I826cefce54ade06c6612c8a7bb53e02092e7b11a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64735
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-06-01 19:45:08 +00:00
..
accessors
cli
.gitignore .gitignore: Ignore .test/.dependencies globally 2020-10-31 18:21:36 +00:00
COPYING
ChangeLog
DISCLAIMER
Makefile
Makefile.inc
README
cbfs.c
cbfs.h cbfs: Rename TYPE_FIT to TYPE_FIT_PAYLOAD 2022-06-01 19:45:08 +00:00
cmos_lowlevel.c
cmos_lowlevel.h
cmos_ops.c
cmos_ops.h
common.c
common.h
compute_ip_checksum.c
coreboot_tables.h coreboot_tables: Replace 'struct lb_uint64' with lb_uint64_t 2022-04-14 22:27:50 +00:00
description.md
hexdump.c
hexdump.h
input_file.c
input_file.h
ip_checksum.h
layout.c
layout.h
lbtable.c coreboot_tables: Replace 'struct lb_uint64' with lb_uint64_t 2022-04-14 22:27:50 +00:00
lbtable.h
nvramtool.spec
reg_expr.c
reg_expr.h
win32mmap.c

README

Summary of Operation
--------------------
nvramtool is a utility for reading/writing coreboot parameters and
displaying information from the coreboot table.  It is intended for x86-based
systems (both 32-bit and 64-bit) that use coreboot.

The coreboot table resides in low physical memory, and may be accessed
through the /dev/mem interface.  It is created at boot time by coreboot, and
contains various system information such as the type of mainboard in use.  It
specifies locations in the CMOS (nonvolatile RAM) where the coreboot
parameters are stored.

For information about coreboot, see https://www.coreboot.org/.

Ideas for Future Improvements
-----------------------------
1.  Move the core functionality of this program into a shared library.
2.  Consider adding options for displaying other BIOS-provided information
    such as the MP table, ACPI table, PCI IRQ routing table, etc.