coreboot-kgpe-d16/util/intelp2m/platforms/lbg/macro.go
Maxim Polyakov 8b35851e4c util/intelp2m: use import once for all included modules
There is no need to repeat "import" for each module in GoLang. Use
this keyword only once in each file for code cleanliness.

Change-Id: Ibb24fafd409b31b174946a39ca1f810d59b87e76
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55985
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-02 07:48:58 +00:00

102 lines
2.9 KiB
Go

package lbg
import (
"fmt"
"../../config"
"../../fields"
"../common"
"../snr"
)
const (
PAD_CFG_DW0_RO_FIELDS = (0x1 << 27) | (0x1 << 24) | (0x3 << 21) | (0xf << 16) | 0xfc
PAD_CFG_DW1_RO_FIELDS = 0xfdffc3ff
)
const (
PAD_CFG_DW0 = common.PAD_CFG_DW0
PAD_CFG_DW1 = common.PAD_CFG_DW1
MAX_DW_NUM = common.MAX_DW_NUM
)
type InheritanceMacro interface {
Pull()
GpiMacroAdd()
GpoMacroAdd()
NativeFunctionMacroAdd()
NoConnMacroAdd()
}
type PlatformSpecific struct {
InheritanceMacro
InheritanceTemplate
}
// RemmapRstSrc - remmap Pad Reset Source Config
func (PlatformSpecific) RemmapRstSrc() {
macro := common.GetMacro()
if config.TemplateGet() != config.TempInteltool {
// Use reset source remapping only if the input file is inteltool.log dump
return
}
dw0 := macro.Register(PAD_CFG_DW0)
var remapping = map[uint8]uint32{
0: common.RST_RSMRST << common.PadRstCfgShift,
1: common.RST_DEEP << common.PadRstCfgShift,
2: common.RST_PLTRST << common.PadRstCfgShift,
}
resetsrc, valid := remapping[dw0.GetResetConfig()]
if valid {
// dw0.SetResetConfig(resetsrc)
ResetConfigFieldVal := (dw0.ValueGet() & 0x3fffffff) | remapping[dw0.GetResetConfig()]
dw0.ValueSet(ResetConfigFieldVal)
} else {
fmt.Println("Invalid Pad Reset Config [ 0x", resetsrc ," ] for ", macro.PadIdGet())
}
dw0.CntrMaskFieldsClear(common.PadRstCfgMask)
}
// Adds The Pad Termination (TERM) parameter from PAD_CFG_DW1 to the macro
// as a new argument
func (platform PlatformSpecific) Pull() {
platform.InheritanceMacro.Pull()
}
// Adds PAD_CFG_GPI macro with arguments
func (platform PlatformSpecific) GpiMacroAdd() {
platform.InheritanceMacro.GpiMacroAdd()
}
// Adds PAD_CFG_GPO macro with arguments
func (platform PlatformSpecific) GpoMacroAdd() {
platform.InheritanceMacro.GpoMacroAdd()
}
// Adds PAD_CFG_NF macro with arguments
func (platform PlatformSpecific) NativeFunctionMacroAdd() {
platform.InheritanceMacro.NativeFunctionMacroAdd()
}
// Adds PAD_NC macro
func (platform PlatformSpecific) NoConnMacroAdd() {
platform.InheritanceMacro.NoConnMacroAdd()
}
// GenMacro - generate pad macro
// dw0 : DW0 config register value
// dw1 : DW1 config register value
// return: string of macro
// error
func (platform PlatformSpecific) GenMacro(id string, dw0 uint32, dw1 uint32, ownership uint8) string {
// The GPIO controller architecture in Lewisburg and Sunrise are very similar,
// so we will inherit some platform-dependent functions from Sunrise.
macro := common.GetInstanceMacro(PlatformSpecific{InheritanceMacro : snr.PlatformSpecific{}},
fields.InterfaceGet())
macro.Clear()
macro.Register(PAD_CFG_DW0).CntrMaskFieldsClear(common.AllFields)
macro.Register(PAD_CFG_DW0).CntrMaskFieldsClear(common.AllFields)
macro.PadIdSet(id).SetPadOwnership(ownership)
macro.Register(PAD_CFG_DW0).ValueSet(dw0).ReadOnlyFieldsSet(PAD_CFG_DW0_RO_FIELDS)
macro.Register(PAD_CFG_DW1).ValueSet(dw1).ReadOnlyFieldsSet(PAD_CFG_DW1_RO_FIELDS)
return macro.Generate()
}