13f1c2af8b
1. x86_setup_mtrr take address bit. 2. generic ht, pcix, pcie beidge... 3. scan bus and reset_bus 4. ht read ctrl to decide if the ht chain is ready 5. Intel e7520 and e7525 support 6. new ich5r support 7. intel sb 6300 support. yhlu patch 1. split x86_setup_mtrrs to fixed and var 2. if (resource->flags & IORESOURCE_FIXED ) return; in device.c pick_largest_resource 3. in_conherent.c K8_SCAN_PCI_BUS git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1982 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
207 lines
9.7 KiB
C
207 lines
9.7 KiB
C
#include <console/console.h>
|
|
#include <arch/smp/mpspec.h>
|
|
#include <device/pci.h>
|
|
#include <string.h>
|
|
#include <stdint.h>
|
|
#if CONFIG_LOGICAL_CPUS==1
|
|
#include <cpu/amd/dualcore.h>
|
|
#endif
|
|
|
|
|
|
static unsigned node_link_to_bus(unsigned node, unsigned link)
|
|
{
|
|
device_t dev;
|
|
unsigned reg;
|
|
|
|
dev = dev_find_slot(0, PCI_DEVFN(0x18, 1));
|
|
if (!dev) {
|
|
return 0;
|
|
}
|
|
for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
|
|
uint32_t config_map;
|
|
unsigned dst_node;
|
|
unsigned dst_link;
|
|
unsigned bus_base;
|
|
config_map = pci_read_config32(dev, reg);
|
|
if ((config_map & 3) != 3) {
|
|
continue;
|
|
}
|
|
dst_node = (config_map >> 4) & 7;
|
|
dst_link = (config_map >> 8) & 3;
|
|
bus_base = (config_map >> 16) & 0xff;
|
|
#if 0
|
|
printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n",
|
|
dst_node, dst_link, bus_base,
|
|
reg, config_map);
|
|
#endif
|
|
if ((dst_node == node) && (dst_link == link))
|
|
{
|
|
return bus_base;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
void *smp_write_config_table(void *v)
|
|
{
|
|
static const char sig[4] = "PCMP";
|
|
static const char oem[8] = "TYAN ";
|
|
static const char productid[12] = "S2850 ";
|
|
struct mp_config_table *mc;
|
|
|
|
unsigned char bus_num;
|
|
unsigned char bus_isa;
|
|
unsigned char bus_chain_0;
|
|
unsigned char bus_8111_1;
|
|
unsigned apicid_base;
|
|
unsigned apicid_8111;
|
|
|
|
mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
|
|
memset(mc, 0, sizeof(*mc));
|
|
|
|
memcpy(mc->mpc_signature, sig, sizeof(sig));
|
|
mc->mpc_length = sizeof(*mc); /* initially just the header */
|
|
mc->mpc_spec = 0x04;
|
|
mc->mpc_checksum = 0; /* not yet computed */
|
|
memcpy(mc->mpc_oem, oem, sizeof(oem));
|
|
memcpy(mc->mpc_productid, productid, sizeof(productid));
|
|
mc->mpc_oemptr = 0;
|
|
mc->mpc_oemsize = 0;
|
|
mc->mpc_entry_count = 0; /* No entries yet... */
|
|
mc->mpc_lapic = LAPIC_ADDR;
|
|
mc->mpe_length = 0;
|
|
mc->mpe_checksum = 0;
|
|
mc->reserved = 0;
|
|
|
|
smp_write_processors(mc);
|
|
{
|
|
device_t dev;
|
|
|
|
/* HT chain 0 */
|
|
bus_chain_0 = node_link_to_bus(0, 0);
|
|
if (bus_chain_0 == 0) {
|
|
printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n");
|
|
bus_chain_0 = 1;
|
|
}
|
|
/* 8111 */
|
|
dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x01,0));
|
|
if (dev) {
|
|
bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
|
|
bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
|
|
bus_isa++;
|
|
}
|
|
else {
|
|
printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n");
|
|
|
|
bus_8111_1 = 2;
|
|
bus_isa = 3;
|
|
}
|
|
}
|
|
/*Bus: Bus ID Type*/
|
|
/* define bus and isa numbers */
|
|
for(bus_num = 0; bus_num < bus_isa; bus_num++) {
|
|
smp_write_bus(mc, bus_num, "PCI ");
|
|
}
|
|
smp_write_bus(mc, bus_isa, "ISA ");
|
|
|
|
|
|
/*I/O APICs: APIC ID Version State Address*/
|
|
#if CONFIG_LOGICAL_CPUS==1
|
|
apicid_base = get_apicid_base(1);
|
|
#else
|
|
apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
|
|
#endif
|
|
apicid_8111 = apicid_base+0;
|
|
|
|
smp_write_ioapic(mc, apicid_8111, 0x11, 0xfec00000);
|
|
|
|
/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
|
|
|
|
smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x0);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_8111, 0x1);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x2);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x3, apicid_8111, 0x3);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x4, apicid_8111, 0x4);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x6, apicid_8111, 0x6);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x7, apicid_8111, 0x7);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x8, apicid_8111, 0x8);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xc, apicid_8111, 0xc);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, apicid_8111, 0xd);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, apicid_8111, 0xe);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_8111, 0xf);
|
|
|
|
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chain_0, (2<<2)|3, apicid_8111, 0x13);
|
|
|
|
//On Board AMD USB
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13);
|
|
|
|
//On Board ATI Display Adapter
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0b<<2)|0, apicid_8111, 0x12);
|
|
|
|
//Onboard Broadcom 5705 NIC
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0d<<2)|0, apicid_8111, 0x13);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0e<<2)|0, apicid_8111, 0x10);
|
|
//Onboard SI Serial ATA
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0c<<2)|0, apicid_8111, 0x11);
|
|
|
|
|
|
//PCI Slot 1
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x03<<2)|0, apicid_8111, 0x10);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x03<<2)|1, apicid_8111, 0x11);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x03<<2)|2, apicid_8111, 0x12);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x03<<2)|3, apicid_8111, 0x13);
|
|
|
|
|
|
//PCI Slot 2
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x06<<2)|0, apicid_8111, 0x11);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x06<<2)|1, apicid_8111, 0x12);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x06<<2)|2, apicid_8111, 0x13);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x06<<2)|3, apicid_8111, 0x10);
|
|
|
|
|
|
//PCI Slot 3
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x07<<2)|0, apicid_8111, 0x12);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x07<<2)|1, apicid_8111, 0x13);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x07<<2)|2, apicid_8111, 0x10);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x07<<2)|3, apicid_8111, 0x11);
|
|
|
|
|
|
//PCI Slot 4
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x08<<2)|0, apicid_8111, 0x13);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x08<<2)|1, apicid_8111, 0x10);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x08<<2)|2, apicid_8111, 0x11);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x08<<2)|3, apicid_8111, 0x12);
|
|
|
|
//PCI Slot 5
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x09<<2)|0, apicid_8111, 0x10);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x09<<2)|1, apicid_8111, 0x11);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x09<<2)|2, apicid_8111, 0x12);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x09<<2)|3, apicid_8111, 0x13);
|
|
|
|
//PCI Slot 6
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|0, apicid_8111, 0x11);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|1, apicid_8111, 0x12);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|2, apicid_8111, 0x13);
|
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|3, apicid_8111, 0x10);
|
|
|
|
/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
|
|
smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0);
|
|
smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x1);
|
|
/* There is no extension information... */
|
|
|
|
/* Compute the checksums */
|
|
mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
|
|
mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
|
|
printk_debug("Wrote the mp table end at: %p - %p\n",
|
|
mc, smp_next_mpe_entry(mc));
|
|
return smp_next_mpe_entry(mc);
|
|
}
|
|
|
|
unsigned long write_smp_table(unsigned long addr)
|
|
{
|
|
void *v;
|
|
v = smp_write_floating_table(addr);
|
|
return (unsigned long)smp_write_config_table(v);
|
|
}
|