57 lines
2.8 KiB
Plaintext
57 lines
2.8 KiB
Plaintext
- 1.1.6
|
|
- pnp/superio devices are now handled cleanly with very little code
|
|
- Initial support for finding x86 BIST errors
|
|
- static resource assignments can now be specified in Config.lb
|
|
- special VGA I/O decode now should work
|
|
- added generic PCI error reporting enables
|
|
- build_opt_tbl now generates a header that allows cmos settings to
|
|
be read from romcc compiled code.
|
|
- split IORESOURCE_SET into IORESOURCE_ASSIGNED and IORESOURCE_STORED
|
|
- romcc now gracesfully handles function pointers instead of dying mysteriously
|
|
- First regression test in amdk8/raminit_test
|
|
- 1.1.5
|
|
- O2, enums, and switch statements work in romcc
|
|
- Support for compiling romcc on non x86 platforms
|
|
- new romc options -msse and -mmmx for specifying extra registers to use
|
|
- Bug fixes to device the device disable/enable framework and an amd8111 implementation
|
|
- Move the link specification to the chip specification instead of the path
|
|
- Allow specifying devices with internal bridges.
|
|
- Initial via epia support
|
|
- Opteron errata fixes
|
|
- 1.1.4
|
|
Major restructuring of hypertransport handling.
|
|
Major rewerite of superio/NSC/pc87360 as a proof of concept for handling superio resources dynamically
|
|
Updates to hard_reset handling when resetting because of the need to change hypertransport link
|
|
speeds and widths.
|
|
(a) No longer assume the boot is good just because we get to a hard reset point.
|
|
(b) Set a flag to indicate that the BIOS triggered the reset so we don't decrement the
|
|
boot counter.
|
|
Updates to arima/hdama mptable so it tracks the new bus numbers
|
|
- 1.1.3
|
|
Major update of the dyanmic device tree to so it can handle
|
|
* subtractive resources
|
|
* merging with the static device tree
|
|
* more device types than just pci
|
|
- 1.1.2
|
|
Add back in the hard_reset method from freebios1 this allows generic
|
|
code to reset the box.
|
|
Update the hypertransport setup code to automatically optimize
|
|
hypertransport link widths and frequencies, and to call hard_reset
|
|
if necessary for the changes to go into effect.
|
|
- 1.1.1
|
|
Updates to the new configuration system so it works more reliably
|
|
Removed a bunch of unused configuration variables
|
|
Removed a bunch of unused assembly code
|
|
- 1.1.0
|
|
A whole bunch of random ppc and opteron work we never put a good label on
|
|
- 1.1.0
|
|
Intial development release of LinuxBIOS.
|
|
Everything is thrown overboard and will be reincluded as necessary so we can
|
|
get rid of the legacy baggage. Since LinuxBIOS was started we have developed
|
|
some better techniques for some things, but we still hang on to the old ways
|
|
because some ports that we want not to break depend on them. So we preserve
|
|
them by preserve the 1.0.x series and keeping only the best practices for
|
|
the 1.1.x series. When there is a stable port this code base will
|
|
become LinuxBIOS 2.0.x and the core will become frozen.
|
|
|