coreboot-kgpe-d16/util/nvramtool
Martin Roth 0be83c09a0 util: Update makefiles for junit testing
- Have clean remove junit.xml files.
- Remove junit.xml target from cbmem makefile - this is in the top
level Makefile.inc now.
- add distclean targets to makefiles.
- Make sure all makefiles have .PHONY set up.
- rm commands need -f or they will fail if the file they're trying
to remove doesn't exist, causing the build to fail.

Change-Id: I2f0635f2c0a9417e3377a90c8d67103323c4a72f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12120
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-24 10:55:45 +02:00
..
accessors Remove empty lines at end of file 2015-06-08 00:55:07 +02:00
cli Remove address from GPLv2 headers 2015-05-21 20:50:25 +02:00
COPYING
ChangeLog
DISCLAIMER
Makefile util: Update makefiles for junit testing 2015-10-24 10:55:45 +02:00
Makefile.inc Remove empty lines at end of file 2015-06-08 00:55:07 +02:00
README
cbfs.c Remove empty lines at end of file 2015-06-08 00:55:07 +02:00
cbfs.h Remove empty lines at end of file 2015-06-08 00:55:07 +02:00
cmos_lowlevel.c Remove address from GPLv2 headers 2015-05-21 20:50:25 +02:00
cmos_lowlevel.h Remove address from GPLv2 headers 2015-05-21 20:50:25 +02:00
cmos_ops.c Remove address from GPLv2 headers 2015-05-21 20:50:25 +02:00
cmos_ops.h Remove address from GPLv2 headers 2015-05-21 20:50:25 +02:00
common.c Remove address from GPLv2 headers 2015-05-21 20:50:25 +02:00
common.h Remove address from GPLv2 headers 2015-05-21 20:50:25 +02:00
compute_ip_checksum.c
coreboot_tables.h Eliminate strict aliasing related warnings. 2011-01-18 12:12:47 +00:00
hexdump.c Remove empty lines at end of file 2015-06-08 00:55:07 +02:00
hexdump.h Remove overengineering, part 1/many 2011-01-18 12:14:08 +00:00
input_file.c Remove address from GPLv2 headers 2015-05-21 20:50:25 +02:00
input_file.h Remove address from GPLv2 headers 2015-05-21 20:50:25 +02:00
ip_checksum.h
layout.c Remove address from GPLv2 headers 2015-05-21 20:50:25 +02:00
layout.h Remove address from GPLv2 headers 2015-05-21 20:50:25 +02:00
lbtable.c Remove empty lines at end of file 2015-06-08 00:55:07 +02:00
lbtable.h Remove address from GPLv2 headers 2015-05-21 20:50:25 +02:00
nvramtool.spec
reg_expr.c Remove empty lines at end of file 2015-06-08 00:55:07 +02:00
reg_expr.h Remove address from GPLv2 headers 2015-05-21 20:50:25 +02:00
win32mmap.c build: build coreboot on mingw. 2012-10-22 21:49:54 +02:00

README

Summary of Operation
--------------------
nvramtool is a utility for reading/writing coreboot parameters and
displaying information from the coreboot table.  It is intended for x86-based
systems (both 32-bit and 64-bit) that use coreboot.

The coreboot table resides in low physical memory, and may be accessed
through the /dev/mem interface.  It is created at boot time by coreboot, and
contains various system information such as the type of mainboard in use.  It
specifies locations in the CMOS (nonvolatile RAM) where the coreboot
parameters are stored.

For information about coreboot, see http://www.coreboot.org/.

Ideas for Future Improvements
-----------------------------
1.  Move the core functionality of this program into a shared library.
2.  Consider adding options for displaying other BIOS-provided information
    such as the MP table, ACPI table, PCI IRQ routing table, etc.