GNUBoot/coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
coreboot-kgpe-d16/payloads/external/Makefile.inc
Sean Rhodes 8e10a4826a payloads/external/tianocore: Hook up debug builds to serial support 
ConSplitterDxe uses the intersection of all outputs, which includes
serial, for the list of supported text modes. When serial output is
supported, this slows down performance and limits the size of
FrontPage.

Only enable edk2's serial support when it's a debug build as
it's the only case where there will be debug output.

Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ic3633767dabb3543e865aa65c4101840a7b69cc1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-07-06 15:46:27 +00:00

394 lines
16 KiB
Makefile
Raw Blame History

## SPDX-License-Identifier: GPL-2.0-only
# set up payload config and version files for later inclusion
ifeq ($(CONFIG_PAYLOAD_BUILD_SEABIOS),y)
PAYLOAD_CONFIG=payloads/external/SeaBIOS/seabios/.config
PAYLOAD_VERSION=payloads/external/SeaBIOS/seabios/out/autoversion.h
endif
ifeq ($(CONFIG_PAYLOAD_FILO),y)
PAYLOAD_CONFIG=payloads/external/FILO/filo/.config
PAYLOAD_VERSION=payloads/external/FILO/filo/build/version.h
endif
ifeq ($(CONFIG_PAYLOAD_DEPTHCHARGE),y)
PAYLOAD_CONFIG=payloads/external/depthcharge/depthcharge/.config
$(PAYLOAD_CONFIG): payloads/external/depthcharge/depthcharge/build/depthcharge.elf
ifeq ($(call strip_quotes,$(CONFIG_MAINBOARD_DEPTHCHARGE)),)
BOARD=$(call ws_to_under,$(call strip_quotes,$(call tolower,$(CONFIG_MAINBOARD_PART_NUMBER))))
else
BOARD=$(CONFIG_MAINBOARD_DEPTHCHARGE)
endif
#TODO: Figure out version
endif
ifeq ($(CONFIG_PAYLOAD_LINUX)$(CONFIG_PAYLOAD_LINUXBOOT),y)
ifneq ($(strip $(call strip_quotes,$(CONFIG_LINUX_COMMAND_LINE))),)
ADDITIONAL_PAYLOAD_CONFIG+=-C $(CONFIG_LINUX_COMMAND_LINE)
endif
ifneq ($(strip $(call strip_quotes,$(CONFIG_LINUX_INITRD))),)
ifneq ($(CONFIG_LINUXBOOT_ARM64),y)
ADDITIONAL_PAYLOAD_CONFIG+=-I $(CONFIG_LINUX_INITRD)$(CONFIG_LINUXBOOT_INITRAMFS_SUFFIX)
prebuilt-files += $(strip $(call strip_quotes,$(CONFIG_LINUX_INITRD)))
endif
endif
endif
ifneq ($(strip $(call strip_quotes,$(CONFIG_PAYLOAD_OPTIONS))),)
ADDITIONAL_PAYLOAD_CONFIG+=$(strip $(call strip_quotes,$(CONFIG_PAYLOAD_OPTIONS)))
endif
cbfs-files-y += $(CONFIG_CBFS_PREFIX)/payload
$(CONFIG_CBFS_PREFIX)/payload-file := $(CONFIG_PAYLOAD_FILE)
ifeq ($(CONFIG_PAYLOAD_IS_FLAT_BINARY),y)
$(CONFIG_CBFS_PREFIX)/payload-type := flat-binary
else
$(CONFIG_CBFS_PREFIX)/payload-type := payload
endif
$(CONFIG_CBFS_PREFIX)/payload-compression := $(CBFS_PAYLOAD_COMPRESS_FLAG)
$(CONFIG_CBFS_PREFIX)/payload-options := $(ADDITIONAL_PAYLOAD_CONFIG)
cbfs-files-$(CONFIG_INCLUDE_CONFIG_FILE) += payload_config
payload_config-file := $(PAYLOAD_CONFIG)
payload_config-type := raw
cbfs-files-$(CONFIG_INCLUDE_CONFIG_FILE) += payload_revision
payload_revision-file := $(PAYLOAD_VERSION)
payload_revision-type := raw
cbfs-files-$(CONFIG_GRUB2_INCLUDE_RUNTIME_CONFIG_FILE) += etc/grub.cfg
etc/grub.cfg-file := $(CONFIG_GRUB2_RUNTIME_CONFIG_FILE)
etc/grub.cfg-type := raw
etc/grub.cfg-required := the GRUB runtime configuration file ($(CONFIG_GRUB2_RUNTIME_CONFIG_FILE))
# SeaBIOS
SEABIOS_CC_OFFSET=$(if $(filter %ccache,$(HOSTCC)),2,1)
SEABIOS_TARGET_PATH=payloads/external/SeaBIOS/seabios/out/bios.bin.elf
$(SEABIOS_TARGET_PATH): $(DOTCONFIG)
$(MAKE) -C payloads/external/SeaBIOS \
HOSTCC="$(HOSTCC)" \
CC=$(word $(SEABIOS_CC_OFFSET),$(CC_x86_32)) \
CFLAGS="$(patsubst $(word $(SEABIOS_CC_OFFSET),$(CC_x86_32))%,,$(wordlist $(SEABIOS_CC_OFFSET),9999,$(CC_x86_32)))" \
LD=$(word 1,$(LD_x86_32)) LDFLAGS="$(patsubst $(word 1,$(LD_x86_32))%,,$(LD_x86_32))" \
OBJDUMP="$(OBJDUMP_x86_32)" \
OBJCOPY="$(OBJCOPY_x86_32)" STRIP="$(STRIP_x86_32)" \
AS="$(AS_x86_32)" IASL="$(IASL)" \
CONFIG_SEABIOS_MASTER=$(CONFIG_SEABIOS_MASTER) \
CONFIG_SEABIOS_STABLE=$(CONFIG_SEABIOS_STABLE) \
CONFIG_SEABIOS_REVISION=$(CONFIG_SEABIOS_REVISION) \
CONFIG_SEABIOS_REVISION_ID=$(CONFIG_SEABIOS_REVISION_ID) \
CONFIG_PAYLOAD_CONFIGFILE=$(CONFIG_PAYLOAD_CONFIGFILE) \
CONFIG_SEABIOS_THREAD_OPTIONROMS=$(CONFIG_SEABIOS_THREAD_OPTIONROMS) \
CONFIG_SEABIOS_VGA_COREBOOT=$(CONFIG_SEABIOS_VGA_COREBOOT) \
CONFIG_DRIVERS_UART_8250IO=$(CONFIG_DRIVERS_UART_8250IO) \
CONFIG_DRIVERS_UART_8250MEM=$(CONFIG_DRIVERS_UART_8250MEM) \
CONFIG_HUDSON_UART=$(CONFIG_HUDSON_UART) \
CONFIG_CONSOLE_SERIAL=$(CONFIG_CONSOLE_SERIAL) \
CONFIG_TTYS0_BASE=$(CONFIG_TTYS0_BASE) \
CONFIG_SEABIOS_DEBUG_LEVEL=$(CONFIG_SEABIOS_DEBUG_LEVEL) \
CONFIG_DRIVERS_UART_8250MEM_32=$(CONFIG_DRIVERS_UART_8250MEM_32) \
CONFIG_ENABLE_HSUART=$(CONFIG_ENABLE_HSUART) \
CONFIG_CONSOLE_UART_BASE_ADDRESS=$(CONFIG_CONSOLE_UART_BASE_ADDRESS) \
CONFIG_SEABIOS_HARDWARE_IRQ=$(CONFIG_SEABIOS_HARDWARE_IRQ)
payloads/external/SeaBIOS/seabios/out/vgabios.bin: $(SEABIOS_TARGET_PATH)
payloads/external/SeaBIOS/seabios/.config: $(SEABIOS_TARGET_PATH)
payloads/external/SeaBIOS/seabios/out/autoversion.h: $(SEABIOS_TARGET_PATH)
cbfs-files-$(CONFIG_SEABIOS_SECONDARY_PAYLOAD) += img/seabios
img/seabios-file := $(SEABIOS_TARGET_PATH)
img/seabios-type := payload
img/seabios-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
# add a SeaBIOS bootorder file
ifneq ($(strip $(CONFIG_SEABIOS_BOOTORDER_FILE)),)
cbfs-files-y += bootorder
bootorder-file := $(strip $(CONFIG_SEABIOS_BOOTORDER_FILE))
bootorder-type := raw
endif
ifneq ($(CONFIG_SEABIOS_PS2_TIMEOUT),)
ifneq ($(CONFIG_SEABIOS_PS2_TIMEOUT),0)
$(call add_intermediate, seabios_ps2_timeout, $(CBFSTOOL))
@printf " SeaBIOS Wait up to $(CONFIG_SEABIOS_PS2_TIMEOUT) ms for PS/2 keyboard controller initialization\n"
$(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/ps2-keyboard-spinup 2>/dev/null)
$(CBFSTOOL) $< add-int -i $(CONFIG_SEABIOS_PS2_TIMEOUT) -n etc/ps2-keyboard-spinup
endif
endif
ifeq ($(CONFIG_SEABIOS_ADD_SERCON_PORT_FILE),y)
$(call add_intermediate, seabios_sercon, $(CBFSTOOL))
@printf " SeaBIOS Add sercon-port file\n"
$(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/sercon-port 2>/dev/null)
$(CBFSTOOL) $< add-int -i $(CONFIG_SEABIOS_SERCON_PORT_ADDR) -n etc/sercon-port
endif
ifeq ($(CONFIG_SEABIOS_THREAD_OPTIONROMS),y)
$(call add_intermediate, seabios_thread_optionroms, $(CBFSTOOL))
@printf " SeaBIOS Thread optionroms\n"
$(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/threads 2>/dev/null)
$(CBFSTOOL) $< add-int -i 2 -n etc/threads
endif
ifeq ($(CONFIG_PAYLOAD_SEAGRUB),y)
ifneq ($(CONFIG_SEAGRUB_ALLOW_SEABIOS_BOOTMENU),y)
$(call add_intermediate, seabios_bootmenu, $(CBFSTOOL))
@printf " SeaBIOS Disable boot menu\n"
$(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/show-boot-menu 2>/dev/null)
$(CBFSTOOL) $< add-int -i 0 -n etc/show-boot-menu
else
$(call add_intermediate, seabios_bootmenu, $(CBFSTOOL))
$(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/show-boot-menu 2>/dev/null)
endif
endif
# Depthcharge
payloads/external/depthcharge/depthcharge/build/depthcharge.elf depthcharge: $(DOTCONFIG) $(CBFSTOOL)
$(MAKE) -C payloads/external/depthcharge \
BOARD=$(BOARD) \
MFLAGS= MAKEFLAGS= \
DEPTHCHARGE_MASTER=$(CONFIG_DEPTHCHARGE_MASTER) \
DEPTHCHARGE_STABLE=$(CONFIG_DEPTHCHARGE_STABLE) \
DEPTHCHARGE_REVISION=$(CONFIG_DEPTHCHARGE_REVISION) \
DEPTHCHARGE_REVISION_ID=$(CONFIG_DEPTHCHARGE_REVISION_ID) \
OVERRIDE_DEFCONFIG=$(CONFIG_LP_DEFCONFIG_OVERRIDE)
# Tianocore
$(obj)/UEFIPAYLOAD.fd tianocore: $(DOTCONFIG)
$(MAKE) -C payloads/external/tianocore all \
HOSTCC="$(HOSTCC)" \
CC="$(HOSTCC)" \
CONFIG_TIANOCORE_REPOSITORY=$(CONFIG_TIANOCORE_REPOSITORY) \
CONFIG_TIANOCORE_TAG_OR_REV=$(CONFIG_TIANOCORE_TAG_OR_REV) \
CONFIG_TIANOCORE_UEFIPAYLOAD=$(CONFIG_TIANOCORE_UEFIPAYLOAD) \
CONFIG_TIANOCORE_UPSTREAM=$(CONFIG_TIANOCORE_UPSTREAM) \
CONFIG_TIANOCORE_CUSTOM=$(CONFIG_TIANOCORE_CUSTOM) \
CONFIG_TIANOCORE_CUSTOM_BUILD_PARAMS=$(CONFIG_TIANOCORE_CUSTOM_BUILD_PARAMS) \
CONFIG_TIANOCORE_COREBOOTPAYLOAD=$(CONFIG_TIANOCORE_COREBOOTPAYLOAD) \
CONFIG_TIANOCORE_DEBUG=$(CONFIG_TIANOCORE_DEBUG) \
CONFIG_TIANOCORE_RELEASE=$(CONFIG_TIANOCORE_RELEASE) \
CONFIG_TIANOCORE_ABOVE_4G_MEMORY=$(CONFIG_TIANOCORE_ABOVE_4G_MEMORY) \
CONFIG_TIANOCORE_BOOTSPLASH_FILE=$(CONFIG_TIANOCORE_BOOTSPLASH_FILE) \
CONFIG_TIANOCORE_BOOT_MANAGER_ESCAPE=$(CONFIG_TIANOCORE_BOOT_MANAGER_ESCAPE) \
CONFIG_TIANOCORE_BOOT_TIMEOUT=$(CONFIG_TIANOCORE_BOOT_TIMEOUT) \
CONFIG_TIANOCORE_CBMEM_LOGGING=$(CONFIG_TIANOCORE_CBMEM_LOGGING) \
CONFIG_TIANOCORE_FOLLOW_BGRT_SPEC=$(CONFIG_TIANOCORE_FOLLOW_BGRT_SPEC) \
CONFIG_TIANOCORE_HAVE_EFI_SHELL=$(CONFIG_TIANOCORE_HAVE_EFI_SHELL) \
CONFIG_TIANOCORE_PRIORITIZE_INTERNAL=$(CONFIG_TIANOCORE_PRIORITIZE_INTERNAL) \
CONFIG_TIANOCORE_PS2_SUPPORT=$(CONFIG_TIANOCORE_PS2_SUPPORT) \
CONFIG_TIANOCORE_SERIAL_SUPPORT=$(TIANOCORE_SERIAL_SUPPORT) \
CONFIG_TIANOCORE_SD_MMC_TIMEOUT=$(CONFIG_TIANOCORE_SD_MMC_TIMEOUT) \
CONFIG_TIANOCORE_USE_8254_TIMER=$(CONFIG_TIANOCORE_USE_8254_TIMER) \
CONFIG_ECAM_MMCONF_BASE_ADDRESS=$(CONFIG_ECAM_MMCONF_BASE_ADDRESS) \
GCC_CC_x86_32=$(GCC_CC_x86_32) \
GCC_CC_x86_64=$(GCC_CC_x86_64) \
GCC_CC_arm=$(GCC_CC_arm) \
GCC_CC_arm64=$(GCC_CC_arm64) \
OBJCOPY_x86_32=$(OBJCOPY_x86_32) \
OBJCOPY_x86_64=$(OBJCOPY_x86_64) \
OBJCOPY_arm=$(OBJCOPY_arm) \
OBJCOPY_arm64=$(OBJCOPY_arm64) \
MFLAGS= MAKEFLAGS=
mv payloads/external/tianocore/output/UEFIPAYLOAD.fd $@
# FILO
filo:
$(MAKE) -C payloads/external/FILO \
HOSTCC="$(HOSTCC)" \
CC="$(CC_x86_32)" LD="$(LD_x86_32)" OBJDUMP="$(OBJDUMP_x86_32)" \
OBJCOPY="$(OBJCOPY_x86_32)" STRIP="$(STRIP_x86_32)" \
CONFIG_FILO_MASTER=$(CONFIG_FILO_MASTER) \
CONFIG_FILO_STABLE=$(CONFIG_FILO_STABLE) \
CONFIG_FILO_USE_AUTOBOOT=$(CONFIG_FILO_USE_AUTOBOOT) \
CONFIG_FILO_AUTOBOOT_FILE=$(CONFIG_FILO_AUTOBOOT_FILE) \
CONFIG_FILO_AUTOBOOT_DELAY=$(CONFIG_FILO_AUTOBOOT_DELAY)
payloads/external/FILO/filo/build/filo.elf: filo
payloads/external/FILO/filo/.config: filo
payloads/external/FILO/filo/build/version.h: filo
# Grub
GRUB_TARGET_PATH=payloads/external/GRUB2/grub2/build/default_payload.elf
cbfs-files-$(CONFIG_GRUB2_SECONDARY_PAYLOAD) += img/grub2
img/grub2-file := $(GRUB_TARGET_PATH)
img/grub2-type := payload
img/grub2-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
grub2: $(obj)/config.h
$(MAKE) -C payloads/external/GRUB2 \
HOSTCC="$(HOSTCC)" \
CC="$(CC_x86_32)" LD="$(LD_x86_32)" \
OBJCOPY="$(OBJCOPY_x86_32)" STRIP="$(STRIP_x86_32)" \
CONFIG_DEP="$(abspath $(obj)/config.h)" \
CONFIG_GRUB2_STABLE=$(CONFIG_GRUB2_STABLE) \
CONFIG_GRUB2_MASTER=$(CONFIG_GRUB2_MASTER) \
CONFIG_GRUB2_REVISION=$(CONFIG_GRUB2_REVISION) \
CONFIG_GRUB2_REVISION_ID=$(CONFIG_GRUB2_REVISION_ID) \
CONFIG_GRUB2_EXTRA_MODULES=$(CONFIG_GRUB2_EXTRA_MODULES)
$(GRUB_TARGET_PATH): grub2
# U-Boot
payloads/external/U-Boot/build/u-boot.bin u-boot: $(DOTCONFIG)
$(MAKE) -C payloads/external/U-Boot \
STABLE_COMMIT_ID=$(CONFIG_UBOOT_STABLE_COMMIT_ID) \
CONFIG_UBOOT_MASTER=$(CONFIG_UBOOT_MASTER) \
CONFIG_UBOOT_STABLE=$(CONFIG_UBOOT_STABLE)
# TINT
payloads/external/tint/tint/tint.elf tint:
$(MAKE) -C payloads/external/tint
cbfs-files-$(CONFIG_TINT_SECONDARY_PAYLOAD) += img/tint
img/tint-file := payloads/external/tint/tint/tint.elf
img/tint-type := payload
img/tint-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
# Memtest86+
cbfs-files-$(CONFIG_MEMTEST_SECONDARY_PAYLOAD) += img/memtest
img/memtest-file := payloads/external/Memtest86Plus/memtest86plus/memtest
img/memtest-type := payload
img/memtest-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
ifeq ($(CONFIG_CONSOLE_SERIAL)$(CONFIG_DRIVERS_UART_8250IO),yy)
MEMTEST_SERIAL_OPTIONS=SERIAL_CONSOLE_DEFAULT=1 \
SERIAL_TTY=$(CONFIG_UART_FOR_CONSOLE) \
SERIAL_BAUD_RATE=$(CONFIG_TTYS0_BAUD)
endif
payloads/external/Memtest86Plus/memtest86plus/memtest: $(DOTCONFIG)
$(MAKE) -C payloads/external/Memtest86Plus all \
CC="$(CC_x86_32)" \
LD="$(LD_x86_32)" \
OBJCOPY="$(OBJCOPY_x86_32)" \
AS="$(AS_x86_32)" \
CONFIG_MEMTEST_REVISION=$(CONFIG_MEMTEST_REVISION) \
CONFIG_MEMTEST_REVISION_ID=$(CONFIG_MEMTEST_REVISION_ID) \
CONFIG_MEMTEST_MASTER=$(CONFIG_MEMTEST_MASTER) \
CONFIG_MEMTEST_STABLE=$(CONFIG_MEMTEST_STABLE) \
$(MEMTEST_SERIAL_OPTIONS) \
MFLAGS= MAKEFLAGS=
# iPXE
PXE_ROM_PCI_ID:=$(subst $(comma),,$(CONFIG_PXE_ROM_ID))
ifeq ($(CONFIG_PXE_ROM),y)
PXE_ROM_FILE:=$(CONFIG_PXE_ROM_FILE)
endif
ifeq ($(CONFIG_BUILD_IPXE),y)
PXE_ROM_FILE:=payloads/external/iPXE/ipxe/ipxe.rom
endif
ifeq ($(CONFIG_PXE_ADD_SCRIPT),y)
PXE_CONFIG_SCRIPT:=$(abspath $(patsubst "%",%,$(CONFIG_PXE_SCRIPT)))
endif
ifeq ($(CONFIG_CONSOLE_SERIAL)$(CONFIG_DRIVERS_UART_8250IO),yy)
IPXE_UART=COM$(call int-add,$(CONFIG_UART_FOR_CONSOLE) 1)
endif
ifeq ($(CONFIG_PXE_SERIAL_CONSOLE),y)
IPXE_SERIAL_CONSOLE = $(CONFIG_CONSOLE_SERIAL)$(CONFIG_DRIVERS_UART_8250IO)
else
IPXE_SERIAL_CONSOLE = n
endif
cbfs-files-$(CONFIG_PXE_ROM)$(CONFIG_BUILD_IPXE) += pci$(CONFIG_PXE_ROM_ID).rom
pci$(CONFIG_PXE_ROM_ID).rom-file := $(PXE_ROM_FILE)
pci$(CONFIG_PXE_ROM_ID).rom-type := raw
payloads/external/iPXE/ipxe/ipxe.rom ipxe: $(DOTCONFIG) $(PXE_CONFIG_SCRIPT)
$(MAKE) -C payloads/external/iPXE all \
CROSS_COMPILE="$(CROSS_COMPILE_$(ARCH-ramstage-y))" \
PXE_ROM_PCI_ID=$(PXE_ROM_PCI_ID) \
CONFIG_IPXE_MASTER=$(CONFIG_IPXE_MASTER) \
CONFIG_IPXE_STABLE=$(CONFIG_IPXE_STABLE) \
CONSOLE_SERIAL=$(IPXE_SERIAL_CONSOLE) \
IPXE_UART=$(IPXE_UART) \
CONFIG_TTYS0_BAUD=$(CONFIG_TTYS0_BAUD) \
CONFIG_SCRIPT=$(PXE_CONFIG_SCRIPT) \
CONFIG_HAS_SCRIPT=$(CONFIG_PXE_ADD_SCRIPT) \
CONFIG_PXE_NO_PROMPT=$(CONFIG_PXE_NO_PROMPT) \
CONFIG_PXE_HAS_HTTPS=$(CONFIG_PXE_HAS_HTTPS) \
MFLAGS= MAKEFLAGS=
# LinuxBoot
linuxboot:
$(MAKE) -C payloads/external/LinuxBoot \
CPUS=$(CPUS) \
CONFIG_LINUXBOOT_X86_64=$(CONFIG_LINUXBOOT_X86_64) \
CONFIG_LINUXBOOT_X86=$(CONFIG_LINUXBOOT_X86) \
CONFIG_LINUXBOOT_ARM64=$(CONFIG_LINUXBOOT_ARM64) \
CONFIG_LINUXBOOT_KERNEL=$(CONFIG_PAYLOAD_FILE) \
CONFIG_LINUXBOOT_INITRAMFS=$(CONFIG_LINUX_INITRD) \
CONFIG_LINUXBOOT_INITRAMFS_SUFFIX=$(CONFIG_LINUXBOOT_INITRAMFS_SUFFIX) \
CONFIG_LINUXBOOT_COMPILE_KERNEL=$(CONFIG_LINUXBOOT_COMPILE_KERNEL) \
CONFIG_LINUXBOOT_BUILD_INITRAMFS=$(CONFIG_LINUXBOOT_BUILD_INITRAMFS) \
CONFIG_LINUXBOOT_KERNEL_MAINLINE=$(CONFIG_LINUXBOOT_KERNEL_MAINLINE) \
CONFIG_LINUXBOOT_KERNEL_STABLE=$(CONFIG_LINUXBOOT_KERNEL_STABLE) \
CONFIG_LINUXBOOT_KERNEL_LONGTERM=$(CONFIG_LINUXBOOT_KERNEL_LONGTERM) \
CONFIG_LINUXBOOT_KERNEL_CUSTOM=$(CONFIG_LINUXBOOT_KERNEL_CUSTOM) \
CONFIG_LINUXBOOT_KERNEL_CUSTOM_VERSION=$(CONFIG_LINUXBOOT_KERNEL_CUSTOM_VERSION) \
CONFIG_LINUXBOOT_KERNEL_CUSTOM_CONFIG=$(CONFIG_LINUXBOOT_KERNEL_CUSTOM_CONFIG) \
CONFIG_LINUXBOOT_KERNEL_BZIMAGE=$(CONFIG_LINUXBOOT_KERNEL_BZIMAGE) \
CONFIG_LINUXBOOT_KERNEL_UIMAGE=$(CONFIG_LINUXBOOT_KERNEL_UIMAGE) \
CONFIG_LINUXBOOT_KERNEL_CONFIGFILE=$(CONFIG_LINUXBOOT_KERNEL_CONFIGFILE) \
CONFIG_LINUXBOOT_INITRAMFS_COMPRESSION_XZ=$(CONFIG_LINUXBOOT_INITRAMFS_COMPRESSION_XZ) \
CONFIG_LINUXBOOT_UROOT=$(CONFIG_LINUXBOOT_UROOT) \
CONFIG_LINUXBOOT_UROOT_VERSION=$(CONFIG_LINUXBOOT_UROOT_VERSION) \
CONFIG_LINUXBOOT_UROOT_FORMAT=$(CONFIG_LINUXBOOT_UROOT_FORMAT) \
CONFIG_LINUXBOOT_UROOT_INITCMD=$(CONFIG_LINUXBOOT_UROOT_INITCMD) \
CONFIG_LINUXBOOT_UROOT_UINITCMD=$(CONFIG_LINUXBOOT_UROOT_UINITCMD)\
CONFIG_LINUXBOOT_UROOT_SHELL=$(CONFIG_LINUXBOOT_UROOT_SHELL) \
CONFIG_LINUXBOOT_UROOT_COMMANDS=$(CONFIG_LINUXBOOT_UROOT_COMMANDS) \
CONFIG_LINUXBOOT_UROOT_FILES=$(CONFIG_LINUXBOOT_UROOT_FILES) \
CONFIG_LINUXBOOT_DTB_FILE=$(CONFIG_LINUXBOOT_DTB_FILE)
payloads/external/LinuxBoot/linuxboot/bzImage: linuxboot
payloads/external/LinuxBoot/linuxboot/uImage: linuxboot
payloads/external/LinuxBoot/linuxboot/initramfs_u-root.cpio: linuxboot
# Yabits
payloads/external/Yabits/uefi/build/uefi.elf yabits:
$(MAKE) -C payloads/external/Yabits all \
XGCCPATH="$(XGCCPATH)" \
CONFIG_YABITS_REVISION=$(CONFIG_YABITS_REVISION) \
CONFIG_YABITS_REVISION_ID=$(CONFIG_YABITS_REVISION_ID) \
CONFIG_YABITS_MASTER=$(CONFIG_YABITS_MASTER) \
CONFIG_YABITS_STABLE=$(CONFIG_YABITS_STABLE) \
MFLAGS= MAKEFLAGS=
# BOOTBOOT
payloads/external/BOOTBOOT/bootboot/dist/bootbootcb.elf:
$(MAKE) -C payloads/external/BOOTBOOT all
# skiboot
payloads/external/skiboot/build/skiboot.elf:
$(MAKE) -C payloads/external/skiboot all \
CONFIG_SKIBOOT_GIT_REPO=$(CONFIG_SKIBOOT_GIT_REPO) \
CONFIG_SKIBOOT_REVISION=$(CONFIG_SKIBOOT_REVISION)
# COREDOOM
payloads/external/coreDOOM/coredoom/doomgeneric/coredoom.elf coredoom:
$(MAKE) -C payloads/external/coreDOOM
cbfs-files-$(CONFIG_COREDOOM_SECONDARY_PAYLOAD) += img/coreDOOM
img/coreDOOM-file := payloads/external/coreDOOM/coredoom/doomgeneric/coredoom.elf
img/coreDOOM-type := payload
img/coreDOOM-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
# WAD file
ifneq ($(strip $(CONFIG_COREDOOM_WAD_FILE)),)
cbfs-files-y += doom.wad
doom.wad-file := $(strip $(CONFIG_COREDOOM_WAD_FILE))
doom.wad-type := raw
doom.wad-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
endif
Reference in a new issue View git blame Copy permalink