Go to file
Martin Roth 8e4aafb531 src/Kconfig: Move options with no prompt towards the end of the file
Options with no prompt can go anywhere in the tree with the same
dependencies and they have the same effect.  Moving them lower in
the tree allows the default values to be overridden by other Kconfig
files.

This patch just moves options with default values that aren't 'n'. The
'n' options are just removed in the next patch, since they aren't needed.

Verified that this makes no significant changes to any config file.

Change-Id: I46175756b937a241edba87dbf70ce1be851fa89d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17907
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-02-06 20:14:45 +01:00
3rdparty 3rdparty: update arm-trusted-firmware submodule 2017-01-12 18:38:26 +01:00
Documentation Documentation: Add Kconfig document 2016-11-13 21:41:44 +01:00
configs configs/builder: Remove pre-defined VGA bios file 2017-01-20 17:37:19 +01:00
payloads payloads/depthcharge: Allow generic libpayload config 2017-02-01 21:14:29 +01:00
src src/Kconfig: Move options with no prompt towards the end of the file 2017-02-06 20:14:45 +01:00
util util/blobtool: Add new tool for compiling/decompiling data blobs 2017-02-04 23:18:35 +01:00
.checkpatch.conf Update .checkpatch.conf 2016-09-02 18:22:04 +02:00
.clang-format
.gitignore .gitignore: Don’t track Tint directory 2017-01-22 21:15:58 +01:00
.gitmodules Set up 3rdparty/libgfxinit 2016-10-29 01:35:03 +02:00
.gitreview
COPYING
MAINTAINERS MAINTAINERS: Add lowrisc files to RISC-V 2016-11-12 19:30:26 +01:00
Makefile build system: mark sub-make invocations as parallelizable 2017-01-31 18:51:55 +01:00
Makefile.inc build system: mark sub-make invocations as parallelizable 2017-01-31 18:51:55 +01:00
README
gnat.adc gnat.adc: Do not generate assertion code for Refined_Post 2016-10-29 01:33:31 +02:00
toolchain.inc Add minimal GNAT run time system (RTS) 2016-09-19 11:14:49 +02:00

README

-------------------------------------------------------------------------------
coreboot README
-------------------------------------------------------------------------------

coreboot is a Free Software project aimed at replacing the proprietary BIOS
(firmware) found in most computers.  coreboot performs a little bit of
hardware initialization and then executes additional boot logic, called a
payload.

With the separation of hardware initialization and later boot logic,
coreboot can scale from specialized applications that run directly
firmware, run operating systems in flash, load custom
bootloaders, or implement firmware standards, like PC BIOS services or
UEFI. This allows for systems to only include the features necessary
in the target application, reducing the amount of code and flash space
required.

coreboot was formerly known as LinuxBIOS.


Payloads
--------

After the basic initialization of the hardware has been performed, any
desired "payload" can be started by coreboot.

See http://www.coreboot.org/Payloads for a list of supported payloads.


Supported Hardware
------------------

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

 * http://www.coreboot.org/Supported_Motherboards
 * http://www.coreboot.org/Supported_Chipsets_and_Devices


Build Requirements
------------------

 * make
 * gcc / g++
   Because Linux distribution compilers tend to use lots of patches. coreboot
   does lots of "unusual" things in its build system, some of which break due
   to those patches, sometimes by gcc aborting, sometimes - and that's worse -
   by generating broken object code.
   Two options: use our toolchain (eg. make crosstools-i386) or enable the
   ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this
   case).
 * iasl (for targets with ACPI support)

Optional:

 * doxygen (for generating/viewing documentation)
 * gdb (for better debugging facilities on some targets)
 * ncurses (for 'make menuconfig' and 'make nconfig')
 * flex and bison (for regenerating parsers)


Building coreboot
-----------------

Please consult http://www.coreboot.org/Build_HOWTO for details.


Testing coreboot Without Modifying Your Hardware
------------------------------------------------

If you want to test coreboot without any risks before you really decide
to use it on your hardware, you can use the QEMU system emulator to run
coreboot virtually in QEMU.

Please see http://www.coreboot.org/QEMU for details.


Website and Mailing List
------------------------

Further details on the project, a FAQ, many HOWTOs, news, development
guidelines and more can be found on the coreboot website:

  http://www.coreboot.org

You can contact us directly on the coreboot mailing list:

  http://www.coreboot.org/Mailinglist


Copyright and License
---------------------

The copyright on coreboot is owned by quite a large number of individual
developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL).
Some files are licensed under the "GPL (version 2, or any later version)",
and some files are licensed under the "GPL, version 2". For some parts, which
were derived from other projects, other (GPL-compatible) licenses may apply.
Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.