200 lines
5.5 KiB
C
200 lines
5.5 KiB
C
/*
|
|
* This file is part of the flashrom project.
|
|
*
|
|
* Copyright (C) 2007 Carl-Daniel Hailfinger
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
/*
|
|
* Contains the generic SPI framework
|
|
*/
|
|
|
|
#include <stdio.h>
|
|
#include <pci/pci.h>
|
|
#include <stdint.h>
|
|
#include <string.h>
|
|
#include "flash.h"
|
|
|
|
#define ITE_SUPERIO_PORT1 0x2e
|
|
#define ITE_SUPERIO_PORT2 0x4e
|
|
|
|
#define JEDEC_RDID {0x9f}
|
|
#define JEDEC_RDID_OUTSIZE 0x01
|
|
#define JEDEC_RDID_INSIZE 0x03
|
|
|
|
static uint16_t it8716f_flashport = 0;
|
|
|
|
/* Generic Super I/O helper functions */
|
|
uint8_t regval(uint16_t port, uint8_t reg)
|
|
{
|
|
outb(reg, port);
|
|
return inb(port + 1);
|
|
}
|
|
|
|
void regwrite(uint16_t port, uint8_t reg, uint8_t val)
|
|
{
|
|
outb(reg, port);
|
|
outb(val, port + 1);
|
|
}
|
|
|
|
/* Helper functions for most recent ITE IT87xx Super I/O chips */
|
|
#define CHIP_ID_BYTE1_REG 0x20
|
|
#define CHIP_ID_BYTE2_REG 0x21
|
|
static void enter_conf_mode_ite(uint16_t port)
|
|
{
|
|
outb(0x87, port);
|
|
outb(0x01, port);
|
|
outb(0x55, port);
|
|
if (port == ITE_SUPERIO_PORT1)
|
|
outb(0x55, port);
|
|
else
|
|
outb(0xaa, port);
|
|
}
|
|
|
|
static void exit_conf_mode_ite(uint16_t port)
|
|
{
|
|
regwrite(port, 0x02, 0x02);
|
|
}
|
|
|
|
static uint16_t find_ite_serial_flash_port(uint16_t port)
|
|
{
|
|
uint8_t tmp = 0;
|
|
uint16_t id, flashport = 0;
|
|
|
|
enter_conf_mode_ite(port);
|
|
|
|
id = regval(port, CHIP_ID_BYTE1_REG) << 8;
|
|
id |= regval(port, CHIP_ID_BYTE2_REG);
|
|
|
|
/* TODO: Handle more IT87xx if they support flash translation */
|
|
if (id == 0x8716) {
|
|
/* NOLDN, reg 0x24, mask out lowest bit (suspend) */
|
|
tmp = regval(port, 0x24) & 0xFE;
|
|
printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
|
|
0xFFFE0000, 0xFFFFFFFF, (tmp & 1 << 1) ? "en" : "dis");
|
|
printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
|
|
0x000E0000, 0x000FFFFF, (tmp & 1 << 1) ? "en" : "dis");
|
|
printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
|
|
0xFFEE0000, 0xFFEFFFFF, (tmp & 1 << 2) ? "en" : "dis");
|
|
printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
|
|
0xFFF80000, 0xFFFEFFFF, (tmp & 1 << 3) ? "en" : "dis");
|
|
printf("LPC write to serial flash %sabled\n",
|
|
(tmp & 1 << 4) ? "en" : "dis");
|
|
printf("serial flash pin %i\n", (tmp & 1 << 5) ? 87 : 29);
|
|
/* LDN 0x7, reg 0x64/0x65 */
|
|
regwrite(port, 0x07, 0x7);
|
|
flashport = regval(port, 0x64) << 8;
|
|
flashport |= regval(port, 0x65);
|
|
}
|
|
exit_conf_mode_ite(port);
|
|
return flashport;
|
|
}
|
|
|
|
/* The IT8716F only supports commands with length 1,2,4,5 bytes including
|
|
command byte and can not read more than 3 bytes from the device.
|
|
This function expects writearr[0] to be the first byte sent to the device,
|
|
whereas the IT8716F splits commands internally into address and non-address
|
|
commands with the address in inverse wire order. That's why the register
|
|
ordering in case 4 and 5 may seem strange. */
|
|
static int it8716f_spi_command(uint16_t port, unsigned char writecnt, unsigned char readcnt, const unsigned char *writearr, unsigned char *readarr)
|
|
{
|
|
uint8_t busy, writeenc;
|
|
do {
|
|
busy = inb(port) & 0x80;
|
|
} while (busy);
|
|
if (readcnt > 3) {
|
|
printf("%s called with unsupported readcnt %i\n",
|
|
__FUNCTION__, readcnt);
|
|
return 1;
|
|
}
|
|
switch (writecnt) {
|
|
case 1:
|
|
outb(writearr[0], port + 1);
|
|
writeenc = 0x0;
|
|
break;
|
|
case 2:
|
|
outb(writearr[0], port + 1);
|
|
outb(writearr[1], port + 7);
|
|
writeenc = 0x1;
|
|
break;
|
|
case 4:
|
|
outb(writearr[0], port + 1);
|
|
outb(writearr[1], port + 4);
|
|
outb(writearr[2], port + 3);
|
|
outb(writearr[3], port + 2);
|
|
writeenc = 0x2;
|
|
break;
|
|
case 5:
|
|
outb(writearr[0], port + 1);
|
|
outb(writearr[1], port + 4);
|
|
outb(writearr[2], port + 3);
|
|
outb(writearr[3], port + 2);
|
|
outb(writearr[4], port + 7);
|
|
writeenc = 0x3;
|
|
break;
|
|
default:
|
|
printf("%s called with unsupported writecnt %i\n",
|
|
__FUNCTION__, writecnt);
|
|
return 1;
|
|
}
|
|
/* Start IO, 33MHz, readcnt input bytes, writecnt output bytes. Note:
|
|
* We can't use writecnt directly, but have to use a strange encoding
|
|
*/
|
|
outb((0x5 << 4) | ((readcnt & 0x3) << 2) | (writeenc), port);
|
|
do {
|
|
busy = inb(port) & 0x80;
|
|
} while (busy);
|
|
readarr[0] = inb(port + 5);
|
|
readarr[1] = inb(port + 6);
|
|
readarr[2] = inb(port + 7);
|
|
return 0;
|
|
}
|
|
|
|
static int it8716f_serial_rdid(uint16_t port, unsigned char *readarr)
|
|
{
|
|
const unsigned char cmd[] = JEDEC_RDID;
|
|
|
|
if (it8716f_spi_command(port, JEDEC_RDID_OUTSIZE, JEDEC_RDID_INSIZE, cmd, readarr))
|
|
return 1;
|
|
printf("RDID returned %02x %02x %02x\n", readarr[0], readarr[1], readarr[2]);
|
|
return 0;
|
|
}
|
|
|
|
int it87xx_probe_serial_flash(const char *name)
|
|
{
|
|
it8716f_flashport = find_ite_serial_flash_port(ITE_SUPERIO_PORT1);
|
|
if (!it8716f_flashport)
|
|
it8716f_flashport = find_ite_serial_flash_port(ITE_SUPERIO_PORT2);
|
|
return (!it8716f_flashport);
|
|
}
|
|
|
|
int probe_spi(struct flashchip *flash)
|
|
{
|
|
unsigned char readarr[3];
|
|
uint8_t manuf_id;
|
|
uint16_t model_id;
|
|
if (it8716f_flashport) {
|
|
it8716f_serial_rdid(it8716f_flashport, readarr);
|
|
manuf_id = readarr[0];
|
|
model_id = (readarr[1] << 8) | readarr[2];
|
|
printf_debug("%s: id1 0x%x, id2 0x%x\n", __FUNCTION__, manuf_id, model_id);
|
|
if (manuf_id == flash->manufacture_id && model_id == flash->model_id)
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|