coreboot-kgpe-d16/util/x86emu/yabel/debug.h

111 lines
4.4 KiB
C

/******************************************************************************
* Copyright (c) 2004, 2008 IBM Corporation
* Copyright (c) 2009 Pattrick Hueper <phueper@hueper.net>
* All rights reserved.
* This program and the accompanying materials
* are made available under the terms of the BSD License
* which accompanies this distribution, and is available at
* http://www.opensource.org/licenses/bsd-license.php
*
* Contributors:
* IBM Corporation - initial implementation
*****************************************************************************/
#ifndef _BIOSEMU_DEBUG_H_
#define _BIOSEMU_DEBUG_H_
#include <types.h>
extern u32 debug_flags;
// from x86emu...needed for debugging
extern void x86emu_dump_xregs(void);
/* printf is not available in coreboot... use printk */
#include <console/console.h>
/* uurgs... yuck... x86emu/x86emu.h is redefining printk... we include it here
* and use its redefinition of printk
* TODO: FIX!!!! */
#include "x86emu/x86emu.h"
#define printf printk
/* PH: empty versions of set/clr_ci
* TODO: remove! */
static inline void clr_ci(void) {};
static inline void set_ci(void) {};
/* Set CONFIG_YABEL_DEBUG_FLAGS is a binary switch that allows you
* to select the following items to debug. 1=on 0=off. After you
* decide what you want to debug create the binary value, convert to hex
* and set the Option (Ex. CONFIG_YABEL_DEBUG_FLAGS = 0x31FF //Debug All).
*
* |-DEBUG_JMP - print info about JMP and RETF opcodes from x86emu
* ||-DEBUG_TRACE_X86EMU - print _all_ opcodes that are executed by x86emu (WARNING: this will produce a LOT of output)
* |||-Currently unused
* ||||-Currently unused
* |||||-Currently unused
* ||||||-DEBUG_PNP - Print Plug And Play access made by option rom
* |||||||-DEBUG_DISK - Print Disk I/O related messages, currently unused
* ||||||||-DEBUG_PMM - Print messages related to POST Memory Manager (PMM)
* |||||||||-DEBUG_VBE - Print messages related to VESA BIOS Extension (VBE) functions
* ||||||||||-DEBUG_PRINT_INT10 - let INT10 (i.e. character output) calls print messages to Debug output
* |||||||||||-DEBUG_INTR - Print messages related to interrupt handling
* ||||||||||||-DEBUG_CHECK_VMEM_ACCESS - Print messages related to accesse to certain areas of the virtual Memory (e.g. BDA (BIOS Data Area) or Interrupt Vectors)
* |||||||||||||-DEBUG_MEM - Print memory access made by option rom (NOTE: this also includes accesses to fetch instructions)
* ||||||||||||||-DEBUG_IO - Print I/O access made by option rom
* 11000111111111 - Max Binary Value, Debug All (WARNING: - This could run for hours)
*/
#define DEBUG_IO 0x1
#define DEBUG_MEM 0x2
// set this to print messages for certain virtual memory accesses (Interrupt Vectors, ...)
#define DEBUG_CHECK_VMEM_ACCESS 0x4
#define DEBUG_INTR 0x8
#define DEBUG_PRINT_INT10 0x10 // set to have the INT10 routine print characters
#define DEBUG_VBE 0x20
#define DEBUG_PMM 0x40
#define DEBUG_DISK 0x80
#define DEBUG_PNP 0x100
#define DEBUG_TRACE_X86EMU 0x1000
// set to enable tracing of JMPs in x86emu
#define DEBUG_JMP 0x2000
//#define CONFIG_DEBUG
//#undef CONFIG_DEBUG
#ifdef CONFIG_DEBUG
#define CHECK_DBG(_flag) if (debug_flags & _flag)
#define DEBUG_PRINTF(_x...) printf(_x);
// prints the CS:IP before the printout, NOTE: actually its CS:IP of the _next_ instruction
// to be executed, since the x86emu advances CS:IP _before_ actually executing an instruction
#define DEBUG_PRINTF_CS_IP(_x...) DEBUG_PRINTF("%x:%x ", M.x86.R_CS, M.x86.R_IP); DEBUG_PRINTF(_x);
#define DEBUG_PRINTF_IO(_x...) CHECK_DBG(DEBUG_IO) { DEBUG_PRINTF_CS_IP(_x) }
#define DEBUG_PRINTF_MEM(_x...) CHECK_DBG(DEBUG_MEM) { DEBUG_PRINTF_CS_IP(_x) }
#define DEBUG_PRINTF_INTR(_x...) CHECK_DBG(DEBUG_INTR) { DEBUG_PRINTF_CS_IP(_x) }
#define DEBUG_PRINTF_VBE(_x...) CHECK_DBG(DEBUG_VBE) { DEBUG_PRINTF_CS_IP(_x) }
#define DEBUG_PRINTF_PMM(_x...) CHECK_DBG(DEBUG_PMM) { DEBUG_PRINTF_CS_IP(_x) }
#define DEBUG_PRINTF_DISK(_x...) CHECK_DBG(DEBUG_DISK) { DEBUG_PRINTF_CS_IP(_x) }
#define DEBUG_PRINTF_PNP(_x...) CHECK_DBG(DEBUG_PNP) { DEBUG_PRINTF_CS_IP(_x) }
#else
#define CHECK_DBG(_flag) if (0)
#define DEBUG_PRINTF(_x...)
#define DEBUG_PRINTF_CS_IP(_x...)
#define DEBUG_PRINTF_IO(_x...)
#define DEBUG_PRINTF_MEM(_x...)
#define DEBUG_PRINTF_INTR(_x...)
#define DEBUG_PRINTF_VBE(_x...)
#define DEBUG_PRINTF_PMM(_x...)
#define DEBUG_PRINTF_DISK(_x...)
#define DEBUG_PRINTF_PNP(_x...)
#endif //CONFIG_DEBUG
void dump(u8 * addr, u32 len);
#endif