coreboot-kgpe-d16/payloads/libpayload
Julius Werner f96d9051c2 Remove MIPS architecture
The MIPS architecture port has been added 5+ years ago in order to
support a Chrome OS project that ended up going nowhere. No other board
has used it since and nobody is still willing or has the expertise and
hardware to maintain it. We have decided that it has become too much of
a mainenance burden and the chance of anyone ever reviving it seems too
slim at this point. This patch eliminates all MIPS code and
MIPS-specific hacks.

Change-Id: I5e49451cd055bbab0a15dcae5f53e0172e6e2ebe
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34919
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-20 10:10:48 +00:00
..
arch Remove MIPS architecture 2019-11-20 10:10:48 +00:00
bin Remove MIPS architecture 2019-11-20 10:10:48 +00:00
configs Remove MIPS architecture 2019-11-20 10:10:48 +00:00
crypto payloads: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX) 2019-03-07 17:15:30 +00:00
curses libpayload: Enable -Wimplicit-fallthrough 2019-07-21 17:17:42 +00:00
drivers Remove MIPS architecture 2019-11-20 10:10:48 +00:00
gdb
include Remove MIPS architecture 2019-11-20 10:10:48 +00:00
libc Remove MIPS architecture 2019-11-20 10:10:48 +00:00
libcbfs payloads: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX) 2019-03-07 17:15:30 +00:00
liblz4
liblzma
libpci
sample Remove MIPS architecture 2019-11-20 10:10:48 +00:00
tests
Doxyfile
Kconfig Remove MIPS architecture 2019-11-20 10:10:48 +00:00
LICENSES
LICENSE_GPL
Makefile Remove MIPS architecture 2019-11-20 10:10:48 +00:00
Makefile.inc Remove MIPS architecture 2019-11-20 10:10:48 +00:00
README payloads/libpayload: Update a Makefile for sample libpayload 2019-06-21 09:16:36 +00:00

README

-------------------------------------------------------------------------------
libpayload README
-------------------------------------------------------------------------------

libpayload is a minimal library to support standalone payloads
that can be booted with firmware like coreboot. It handles the setup
code, and provides common C library symbols such as malloc() and printf().

Note: This is _not_ a standard library for use with an operating system,
rather it's only useful for coreboot payload development!
See https://www.coreboot.org for details on coreboot.


Installation
------------

 $ git clone https://review.coreboot.org/coreboot.git

 $ cd coreboot/payloads/libpayload

 $ make menuconfig

 $ make

 $ make install (optional, will install into ./install per default)

On x86 systems, libpayload will always be 32-bit even if your host OS runs
in 64-bit, so you might have to install the 32-bit libgcc version.
On Debian systems you'd do 'apt-get install gcc-multilib' for example.

Run 'make distclean' before switching boards. This command will remove
your current .config file, so you need 'make menuconfig' again or
'make defconfig' in order to set up configuration. Default configuration
is based on 'configs/defconfig'. See the configs/ directory for examples
of configuration.


Usage
-----

Here's an example of a very simple payload (hello.c) and how to build it:

 #include <libpayload.h>

 int main(void)
 {
     printf("Hello, world!\n");
     return 0;
 }

Building the payload using the 'lpgcc' compiler wrapper:

 $ lpgcc -o hello.elf hello.c

Please see the sample/ directory for details.


Website and Mailing List
------------------------

The main website is https://www.coreboot.org/Libpayload.

For additional information, patches, and discussions, please join the
coreboot mailing list at https://www.coreboot.org/Mailinglist, where most
libpayload developers are subscribed.


Copyright and License
---------------------

See LICENSES.