GNUBoot/coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
coreboot-kgpe-d16/payloads/external/Makefile.inc
Sean Rhodes 38c99b5659 payloads/tianocore: Rename TianoCore to edk2 
coreboot uses TianoCore interchangeably with EDK II, and whilst the
meaning is generally clear, it's not the payload it uses. EDK II is
commonly written as edk2.

coreboot builds edk2 directly from the edk2 repository. Whilst it
can build some components from edk2-platforms, the target is still
edk2.

[1] tianocore.org - "Welcome to TianoCore, the community supporting"
[2] tianocore.org - "EDK II is a modern, feature-rich, cross-platform
firmware development environment for the UEFI and UEFI Platform
Initialization (PI) specifications."

Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4de125d92ae38ff8dfd0c4c06806c2d2921945ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65820
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-08-13 16:35:18 +00:00

395 lines
16 KiB
Makefile
Raw Blame History

## SPDX-License-Identifier: GPL-2.0-only
# set up payload config and version files for later inclusion
ifeq ($(CONFIG_PAYLOAD_BUILD_SEABIOS),y)
PAYLOAD_CONFIG=payloads/external/SeaBIOS/seabios/.config
PAYLOAD_VERSION=payloads/external/SeaBIOS/seabios/out/autoversion.h
endif
ifeq ($(CONFIG_PAYLOAD_FILO),y)
PAYLOAD_CONFIG=payloads/external/FILO/filo/.config
PAYLOAD_VERSION=payloads/external/FILO/filo/build/version.h
endif
ifeq ($(CONFIG_PAYLOAD_DEPTHCHARGE),y)
PAYLOAD_CONFIG=payloads/external/depthcharge/depthcharge/.config
$(PAYLOAD_CONFIG): payloads/external/depthcharge/depthcharge/build/depthcharge.elf
ifeq ($(call strip_quotes,$(CONFIG_MAINBOARD_DEPTHCHARGE)),)
BOARD=$(call ws_to_under,$(call strip_quotes,$(call tolower,$(CONFIG_MAINBOARD_PART_NUMBER))))
else
BOARD=$(CONFIG_MAINBOARD_DEPTHCHARGE)
endif
#TODO: Figure out version
endif
ifeq ($(CONFIG_PAYLOAD_LINUX)$(CONFIG_PAYLOAD_LINUXBOOT),y)
ifneq ($(strip $(call strip_quotes,$(CONFIG_LINUX_COMMAND_LINE))),)
ADDITIONAL_PAYLOAD_CONFIG+=-C $(CONFIG_LINUX_COMMAND_LINE)
endif
ifneq ($(strip $(call strip_quotes,$(CONFIG_LINUX_INITRD))),)
ifneq ($(CONFIG_LINUXBOOT_ARM64),y)
ADDITIONAL_PAYLOAD_CONFIG+=-I $(CONFIG_LINUX_INITRD)$(CONFIG_LINUXBOOT_INITRAMFS_SUFFIX)
prebuilt-files += $(strip $(call strip_quotes,$(CONFIG_LINUX_INITRD)))
endif
endif
endif
ifneq ($(strip $(call strip_quotes,$(CONFIG_PAYLOAD_OPTIONS))),)
ADDITIONAL_PAYLOAD_CONFIG+=$(strip $(call strip_quotes,$(CONFIG_PAYLOAD_OPTIONS)))
endif
cbfs-files-y += $(CONFIG_CBFS_PREFIX)/payload
$(CONFIG_CBFS_PREFIX)/payload-file := $(CONFIG_PAYLOAD_FILE)
ifeq ($(CONFIG_PAYLOAD_IS_FLAT_BINARY),y)
$(CONFIG_CBFS_PREFIX)/payload-type := flat-binary
else
$(CONFIG_CBFS_PREFIX)/payload-type := payload
endif
$(CONFIG_CBFS_PREFIX)/payload-compression := $(CBFS_PAYLOAD_COMPRESS_FLAG)
$(CONFIG_CBFS_PREFIX)/payload-options := $(ADDITIONAL_PAYLOAD_CONFIG)
cbfs-files-$(CONFIG_INCLUDE_CONFIG_FILE) += payload_config
payload_config-file := $(PAYLOAD_CONFIG)
payload_config-type := raw
cbfs-files-$(CONFIG_INCLUDE_CONFIG_FILE) += payload_revision
payload_revision-file := $(PAYLOAD_VERSION)
payload_revision-type := raw
cbfs-files-$(CONFIG_GRUB2_INCLUDE_RUNTIME_CONFIG_FILE) += etc/grub.cfg
etc/grub.cfg-file := $(CONFIG_GRUB2_RUNTIME_CONFIG_FILE)
etc/grub.cfg-type := raw
etc/grub.cfg-required := the GRUB runtime configuration file ($(CONFIG_GRUB2_RUNTIME_CONFIG_FILE))
# SeaBIOS
SEABIOS_CC_OFFSET=$(if $(filter %ccache,$(HOSTCC)),2,1)
SEABIOS_TARGET_PATH=payloads/external/SeaBIOS/seabios/out/bios.bin.elf
$(SEABIOS_TARGET_PATH): $(DOTCONFIG)
$(MAKE) -C payloads/external/SeaBIOS \
HOSTCC="$(HOSTCC)" \
CC=$(word $(SEABIOS_CC_OFFSET),$(CC_x86_32)) \
CFLAGS="$(patsubst $(word $(SEABIOS_CC_OFFSET),$(CC_x86_32))%,,$(wordlist $(SEABIOS_CC_OFFSET),9999,$(CC_x86_32)))" \
LD=$(word 1,$(LD_x86_32)) LDFLAGS="$(patsubst $(word 1,$(LD_x86_32))%,,$(LD_x86_32))" \
OBJDUMP="$(OBJDUMP_x86_32)" \
OBJCOPY="$(OBJCOPY_x86_32)" STRIP="$(STRIP_x86_32)" \
AS="$(AS_x86_32)" IASL="$(IASL)" \
CONFIG_SEABIOS_MASTER=$(CONFIG_SEABIOS_MASTER) \
CONFIG_SEABIOS_STABLE=$(CONFIG_SEABIOS_STABLE) \
CONFIG_SEABIOS_REVISION=$(CONFIG_SEABIOS_REVISION) \
CONFIG_SEABIOS_REVISION_ID=$(CONFIG_SEABIOS_REVISION_ID) \
CONFIG_PAYLOAD_CONFIGFILE=$(CONFIG_PAYLOAD_CONFIGFILE) \
CONFIG_SEABIOS_THREAD_OPTIONROMS=$(CONFIG_SEABIOS_THREAD_OPTIONROMS) \
CONFIG_SEABIOS_VGA_COREBOOT=$(CONFIG_SEABIOS_VGA_COREBOOT) \
CONFIG_DRIVERS_UART_8250IO=$(CONFIG_DRIVERS_UART_8250IO) \
CONFIG_DRIVERS_UART_8250MEM=$(CONFIG_DRIVERS_UART_8250MEM) \
CONFIG_HUDSON_UART=$(CONFIG_HUDSON_UART) \
CONFIG_CONSOLE_SERIAL=$(CONFIG_CONSOLE_SERIAL) \
CONFIG_TTYS0_BASE=$(CONFIG_TTYS0_BASE) \
CONFIG_SEABIOS_DEBUG_LEVEL=$(CONFIG_SEABIOS_DEBUG_LEVEL) \
CONFIG_DRIVERS_UART_8250MEM_32=$(CONFIG_DRIVERS_UART_8250MEM_32) \
CONFIG_ENABLE_HSUART=$(CONFIG_ENABLE_HSUART) \
CONFIG_CONSOLE_UART_BASE_ADDRESS=$(CONFIG_CONSOLE_UART_BASE_ADDRESS) \
CONFIG_SEABIOS_HARDWARE_IRQ=$(CONFIG_SEABIOS_HARDWARE_IRQ)
payloads/external/SeaBIOS/seabios/out/vgabios.bin: $(SEABIOS_TARGET_PATH)
payloads/external/SeaBIOS/seabios/.config: $(SEABIOS_TARGET_PATH)
payloads/external/SeaBIOS/seabios/out/autoversion.h: $(SEABIOS_TARGET_PATH)
cbfs-files-$(CONFIG_SEABIOS_SECONDARY_PAYLOAD) += img/seabios
img/seabios-file := $(SEABIOS_TARGET_PATH)
img/seabios-type := payload
img/seabios-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
# add a SeaBIOS bootorder file
ifneq ($(strip $(CONFIG_SEABIOS_BOOTORDER_FILE)),)
cbfs-files-y += bootorder
bootorder-file := $(strip $(CONFIG_SEABIOS_BOOTORDER_FILE))
bootorder-type := raw
endif
ifneq ($(CONFIG_SEABIOS_PS2_TIMEOUT),)
ifneq ($(CONFIG_SEABIOS_PS2_TIMEOUT),0)
$(call add_intermediate, seabios_ps2_timeout, $(CBFSTOOL))
@printf " SeaBIOS Wait up to $(CONFIG_SEABIOS_PS2_TIMEOUT) ms for PS/2 keyboard controller initialization\n"
$(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/ps2-keyboard-spinup 2>/dev/null)
$(CBFSTOOL) $< add-int -i $(CONFIG_SEABIOS_PS2_TIMEOUT) -n etc/ps2-keyboard-spinup
endif
endif
ifeq ($(CONFIG_SEABIOS_ADD_SERCON_PORT_FILE),y)
$(call add_intermediate, seabios_sercon, $(CBFSTOOL))
@printf " SeaBIOS Add sercon-port file\n"
$(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/sercon-port 2>/dev/null)
$(CBFSTOOL) $< add-int -i $(CONFIG_SEABIOS_SERCON_PORT_ADDR) -n etc/sercon-port
endif
ifeq ($(CONFIG_SEABIOS_THREAD_OPTIONROMS),y)
$(call add_intermediate, seabios_thread_optionroms, $(CBFSTOOL))
@printf " SeaBIOS Thread optionroms\n"
$(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/threads 2>/dev/null)
$(CBFSTOOL) $< add-int -i 2 -n etc/threads
endif
ifeq ($(CONFIG_PAYLOAD_SEAGRUB),y)
ifneq ($(CONFIG_SEAGRUB_ALLOW_SEABIOS_BOOTMENU),y)
$(call add_intermediate, seabios_bootmenu, $(CBFSTOOL))
@printf " SeaBIOS Disable boot menu\n"
$(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/show-boot-menu 2>/dev/null)
$(CBFSTOOL) $< add-int -i 0 -n etc/show-boot-menu
else
$(call add_intermediate, seabios_bootmenu, $(CBFSTOOL))
$(if $(CONFIG_UPDATE_IMAGE),-$(CBFSTOOL) $< remove -n etc/show-boot-menu 2>/dev/null)
endif
endif
# Depthcharge
payloads/external/depthcharge/depthcharge/build/depthcharge.elf depthcharge: $(DOTCONFIG) $(CBFSTOOL)
$(MAKE) -C payloads/external/depthcharge \
BOARD=$(BOARD) \
MFLAGS= MAKEFLAGS= \
DEPTHCHARGE_MASTER=$(CONFIG_DEPTHCHARGE_MASTER) \
DEPTHCHARGE_STABLE=$(CONFIG_DEPTHCHARGE_STABLE) \
DEPTHCHARGE_REVISION=$(CONFIG_DEPTHCHARGE_REVISION) \
DEPTHCHARGE_REVISION_ID=$(CONFIG_DEPTHCHARGE_REVISION_ID) \
OVERRIDE_DEFCONFIG=$(CONFIG_LP_DEFCONFIG_OVERRIDE)
# edk2
$(obj)/UEFIPAYLOAD.fd edk2: $(DOTCONFIG)
$(MAKE) -C payloads/external/edk2 all \
HOSTCC="$(HOSTCC)" \
CC="$(HOSTCC)" \
CONFIG_EDK2_REPOSITORY=$(CONFIG_EDK2_REPOSITORY) \
CONFIG_EDK2_TAG_OR_REV=$(CONFIG_EDK2_TAG_OR_REV) \
CONFIG_EDK2_UEFIPAYLOAD=$(CONFIG_EDK2_UEFIPAYLOAD) \
CONFIG_EDK2_UPSTREAM=$(CONFIG_EDK2_UPSTREAM) \
CONFIG_EDK2_CUSTOM=$(CONFIG_EDK2_CUSTOM) \
CONFIG_EDK2_CUSTOM_BUILD_PARAMS=$(CONFIG_EDK2_CUSTOM_BUILD_PARAMS) \
CONFIG_EDK2_DEBUG=$(CONFIG_EDK2_DEBUG) \
CONFIG_EDK2_RELEASE=$(CONFIG_EDK2_RELEASE) \
CONFIG_EDK2_ABOVE_4G_MEMORY=$(CONFIG_EDK2_ABOVE_4G_MEMORY) \
CONFIG_EDK2_BOOTSPLASH_FILE=$(CONFIG_EDK2_BOOTSPLASH_FILE) \
CONFIG_EDK2_BOOT_MANAGER_ESCAPE=$(CONFIG_EDK2_BOOT_MANAGER_ESCAPE) \
CONFIG_EDK2_BOOT_TIMEOUT=$(CONFIG_EDK2_BOOT_TIMEOUT) \
CONFIG_EDK2_CBMEM_LOGGING=$(CONFIG_EDK2_CBMEM_LOGGING) \
CONFIG_EDK2_FOLLOW_BGRT_SPEC=$(CONFIG_EDK2_FOLLOW_BGRT_SPEC) \
CONFIG_EDK2_FULL_SCREEN_SETUP=$(CONFIG_EDK2_FULL_SCREEN_SETUP) \
CONFIG_EDK2_HAVE_EFI_SHELL=$(CONFIG_EDK2_HAVE_EFI_SHELL) \
CONFIG_EDK2_PRIORITIZE_INTERNAL=$(CONFIG_EDK2_PRIORITIZE_INTERNAL) \
CONFIG_EDK2_PS2_SUPPORT=$(CONFIG_EDK2_PS2_SUPPORT) \
CONFIG_EDK2_SERIAL_SUPPORT=$(CONFIG_EDK2_SERIAL_SUPPORT) \
CONFIG_EDK2_SD_MMC_TIMEOUT=$(CONFIG_EDK2_SD_MMC_TIMEOUT) \
CONFIG_ECAM_MMCONF_BASE_ADDRESS=$(CONFIG_ECAM_MMCONF_BASE_ADDRESS) \
CONFIG_ECAM_MMCONF_LENGTH=$(CONFIG_ECAM_MMCONF_LENGTH) \
CONFIG_SMMSTORE_V2=$(CONFIG_SMMSTORE_v2) \
GCC_CC_x86_32=$(GCC_CC_x86_32) \
GCC_CC_x86_64=$(GCC_CC_x86_64) \
GCC_CC_arm=$(GCC_CC_arm) \
GCC_CC_arm64=$(GCC_CC_arm64) \
OBJCOPY_x86_32=$(OBJCOPY_x86_32) \
OBJCOPY_x86_64=$(OBJCOPY_x86_64) \
OBJCOPY_arm=$(OBJCOPY_arm) \
OBJCOPY_arm64=$(OBJCOPY_arm64) \
MFLAGS= MAKEFLAGS=
mv payloads/external/edk2/output/UEFIPAYLOAD.fd $@
# FILO
filo:
$(MAKE) -C payloads/external/FILO \
HOSTCC="$(HOSTCC)" \
CC="$(CC_x86_32)" LD="$(LD_x86_32)" OBJDUMP="$(OBJDUMP_x86_32)" \
OBJCOPY="$(OBJCOPY_x86_32)" STRIP="$(STRIP_x86_32)" \
CONFIG_FILO_MASTER=$(CONFIG_FILO_MASTER) \
CONFIG_FILO_STABLE=$(CONFIG_FILO_STABLE) \
CONFIG_FILO_USE_AUTOBOOT=$(CONFIG_FILO_USE_AUTOBOOT) \
CONFIG_FILO_AUTOBOOT_FILE=$(CONFIG_FILO_AUTOBOOT_FILE) \
CONFIG_FILO_AUTOBOOT_DELAY=$(CONFIG_FILO_AUTOBOOT_DELAY)
payloads/external/FILO/filo/build/filo.elf: filo
payloads/external/FILO/filo/.config: filo
payloads/external/FILO/filo/build/version.h: filo
# Grub
GRUB_TARGET_PATH=payloads/external/GRUB2/grub2/build/default_payload.elf
cbfs-files-$(CONFIG_GRUB2_SECONDARY_PAYLOAD) += img/grub2
img/grub2-file := $(GRUB_TARGET_PATH)
img/grub2-type := payload
img/grub2-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
grub2: $(obj)/config.h
$(MAKE) -C payloads/external/GRUB2 \
HOSTCC="$(HOSTCC)" \
CC="$(CC_x86_32)" LD="$(LD_x86_32)" \
OBJCOPY="$(OBJCOPY_x86_32)" STRIP="$(STRIP_x86_32)" \
CONFIG_DEP="$(abspath $(obj)/config.h)" \
CONFIG_GRUB2_STABLE=$(CONFIG_GRUB2_STABLE) \
CONFIG_GRUB2_MASTER=$(CONFIG_GRUB2_MASTER) \
CONFIG_GRUB2_REVISION=$(CONFIG_GRUB2_REVISION) \
CONFIG_GRUB2_REVISION_ID=$(CONFIG_GRUB2_REVISION_ID) \
CONFIG_GRUB2_EXTRA_MODULES=$(CONFIG_GRUB2_EXTRA_MODULES)
$(GRUB_TARGET_PATH): grub2
# U-Boot
payloads/external/U-Boot/build/u-boot.bin u-boot: $(DOTCONFIG)
$(MAKE) -C payloads/external/U-Boot \
STABLE_COMMIT_ID=$(CONFIG_UBOOT_STABLE_COMMIT_ID) \
CONFIG_UBOOT_MASTER=$(CONFIG_UBOOT_MASTER) \
CONFIG_UBOOT_STABLE=$(CONFIG_UBOOT_STABLE)
# TINT
payloads/external/tint/tint/tint.elf tint:
$(MAKE) -C payloads/external/tint
cbfs-files-$(CONFIG_TINT_SECONDARY_PAYLOAD) += img/tint
img/tint-file := payloads/external/tint/tint/tint.elf
img/tint-type := payload
img/tint-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
# Memtest86+
cbfs-files-$(CONFIG_MEMTEST_SECONDARY_PAYLOAD) += img/memtest
img/memtest-file := payloads/external/Memtest86Plus/memtest86plus/memtest
img/memtest-type := payload
img/memtest-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
ifeq ($(CONFIG_CONSOLE_SERIAL)$(CONFIG_DRIVERS_UART_8250IO),yy)
MEMTEST_SERIAL_OPTIONS=SERIAL_CONSOLE_DEFAULT=1 \
SERIAL_TTY=$(CONFIG_UART_FOR_CONSOLE) \
SERIAL_BAUD_RATE=$(CONFIG_TTYS0_BAUD)
endif
payloads/external/Memtest86Plus/memtest86plus/memtest: $(DOTCONFIG)
$(MAKE) -C payloads/external/Memtest86Plus all \
CC="$(CC_x86_32)" \
LD="$(LD_x86_32)" \
OBJCOPY="$(OBJCOPY_x86_32)" \
AS="$(AS_x86_32)" \
CONFIG_MEMTEST_REVISION=$(CONFIG_MEMTEST_REVISION) \
CONFIG_MEMTEST_REVISION_ID=$(CONFIG_MEMTEST_REVISION_ID) \
CONFIG_MEMTEST_MASTER=$(CONFIG_MEMTEST_MASTER) \
CONFIG_MEMTEST_STABLE=$(CONFIG_MEMTEST_STABLE) \
$(MEMTEST_SERIAL_OPTIONS) \
MFLAGS= MAKEFLAGS=
# iPXE
PXE_ROM_PCI_ID:=$(subst $(comma),,$(CONFIG_PXE_ROM_ID))
ifeq ($(CONFIG_PXE_ROM),y)
PXE_ROM_FILE:=$(CONFIG_PXE_ROM_FILE)
endif
ifeq ($(CONFIG_BUILD_IPXE),y)
PXE_ROM_FILE:=payloads/external/iPXE/ipxe/ipxe.rom
endif
ifeq ($(CONFIG_PXE_ADD_SCRIPT),y)
PXE_CONFIG_SCRIPT:=$(abspath $(patsubst "%",%,$(CONFIG_PXE_SCRIPT)))
endif
ifeq ($(CONFIG_CONSOLE_SERIAL)$(CONFIG_DRIVERS_UART_8250IO),yy)
IPXE_UART=COM$(call int-add,$(CONFIG_UART_FOR_CONSOLE) 1)
endif
ifeq ($(CONFIG_PXE_SERIAL_CONSOLE),y)
IPXE_SERIAL_CONSOLE = $(CONFIG_CONSOLE_SERIAL)$(CONFIG_DRIVERS_UART_8250IO)
else
IPXE_SERIAL_CONSOLE = n
endif
cbfs-files-$(CONFIG_PXE_ROM)$(CONFIG_BUILD_IPXE) += pci$(CONFIG_PXE_ROM_ID).rom
pci$(CONFIG_PXE_ROM_ID).rom-file := $(PXE_ROM_FILE)
pci$(CONFIG_PXE_ROM_ID).rom-type := raw
payloads/external/iPXE/ipxe/ipxe.rom ipxe: $(DOTCONFIG) $(PXE_CONFIG_SCRIPT)
$(MAKE) -C payloads/external/iPXE all \
CROSS_COMPILE="$(CROSS_COMPILE_$(ARCH-ramstage-y))" \
PXE_ROM_PCI_ID=$(PXE_ROM_PCI_ID) \
CONFIG_IPXE_MASTER=$(CONFIG_IPXE_MASTER) \
CONFIG_IPXE_STABLE=$(CONFIG_IPXE_STABLE) \
CONSOLE_SERIAL=$(IPXE_SERIAL_CONSOLE) \
IPXE_UART=$(IPXE_UART) \
CONFIG_TTYS0_BAUD=$(CONFIG_TTYS0_BAUD) \
CONFIG_SCRIPT=$(PXE_CONFIG_SCRIPT) \
CONFIG_HAS_SCRIPT=$(CONFIG_PXE_ADD_SCRIPT) \
CONFIG_PXE_NO_PROMPT=$(CONFIG_PXE_NO_PROMPT) \
CONFIG_PXE_HAS_HTTPS=$(CONFIG_PXE_HAS_HTTPS) \
MFLAGS= MAKEFLAGS=
# LinuxBoot
linuxboot:
$(MAKE) -C payloads/external/LinuxBoot \
CPUS=$(CPUS) \
CONFIG_LINUXBOOT_X86_64=$(CONFIG_LINUXBOOT_X86_64) \
CONFIG_LINUXBOOT_X86=$(CONFIG_LINUXBOOT_X86) \
CONFIG_LINUXBOOT_ARM64=$(CONFIG_LINUXBOOT_ARM64) \
CONFIG_LINUXBOOT_KERNEL=$(CONFIG_PAYLOAD_FILE) \
CONFIG_LINUXBOOT_INITRAMFS=$(CONFIG_LINUX_INITRD) \
CONFIG_LINUXBOOT_INITRAMFS_SUFFIX=$(CONFIG_LINUXBOOT_INITRAMFS_SUFFIX) \
CONFIG_LINUXBOOT_COMPILE_KERNEL=$(CONFIG_LINUXBOOT_COMPILE_KERNEL) \
CONFIG_LINUXBOOT_BUILD_INITRAMFS=$(CONFIG_LINUXBOOT_BUILD_INITRAMFS) \
CONFIG_LINUXBOOT_KERNEL_MAINLINE=$(CONFIG_LINUXBOOT_KERNEL_MAINLINE) \
CONFIG_LINUXBOOT_KERNEL_STABLE=$(CONFIG_LINUXBOOT_KERNEL_STABLE) \
CONFIG_LINUXBOOT_KERNEL_LONGTERM=$(CONFIG_LINUXBOOT_KERNEL_LONGTERM) \
CONFIG_LINUXBOOT_KERNEL_CUSTOM=$(CONFIG_LINUXBOOT_KERNEL_CUSTOM) \
CONFIG_LINUXBOOT_KERNEL_CUSTOM_VERSION=$(CONFIG_LINUXBOOT_KERNEL_CUSTOM_VERSION) \
CONFIG_LINUXBOOT_KERNEL_CUSTOM_CONFIG=$(CONFIG_LINUXBOOT_KERNEL_CUSTOM_CONFIG) \
CONFIG_LINUXBOOT_KERNEL_BZIMAGE=$(CONFIG_LINUXBOOT_KERNEL_BZIMAGE) \
CONFIG_LINUXBOOT_KERNEL_UIMAGE=$(CONFIG_LINUXBOOT_KERNEL_UIMAGE) \
CONFIG_LINUXBOOT_KERNEL_CONFIGFILE=$(CONFIG_LINUXBOOT_KERNEL_CONFIGFILE) \
CONFIG_LINUXBOOT_INITRAMFS_COMPRESSION_XZ=$(CONFIG_LINUXBOOT_INITRAMFS_COMPRESSION_XZ) \
CONFIG_LINUXBOOT_UROOT=$(CONFIG_LINUXBOOT_UROOT) \
CONFIG_LINUXBOOT_UROOT_VERSION=$(CONFIG_LINUXBOOT_UROOT_VERSION) \
CONFIG_LINUXBOOT_UROOT_FORMAT=$(CONFIG_LINUXBOOT_UROOT_FORMAT) \
CONFIG_LINUXBOOT_UROOT_INITCMD=$(CONFIG_LINUXBOOT_UROOT_INITCMD) \
CONFIG_LINUXBOOT_UROOT_UINITCMD=$(CONFIG_LINUXBOOT_UROOT_UINITCMD)\
CONFIG_LINUXBOOT_UROOT_SHELL=$(CONFIG_LINUXBOOT_UROOT_SHELL) \
CONFIG_LINUXBOOT_UROOT_COMMANDS=$(CONFIG_LINUXBOOT_UROOT_COMMANDS) \
CONFIG_LINUXBOOT_UROOT_FILES=$(CONFIG_LINUXBOOT_UROOT_FILES) \
CONFIG_LINUXBOOT_DTB_FILE=$(CONFIG_LINUXBOOT_DTB_FILE)
payloads/external/LinuxBoot/linuxboot/bzImage: linuxboot
payloads/external/LinuxBoot/linuxboot/uImage: linuxboot
payloads/external/LinuxBoot/linuxboot/initramfs_u-root.cpio: linuxboot
# Yabits
payloads/external/Yabits/uefi/build/uefi.elf yabits:
$(MAKE) -C payloads/external/Yabits all \
XGCCPATH="$(XGCCPATH)" \
CONFIG_YABITS_REVISION=$(CONFIG_YABITS_REVISION) \
CONFIG_YABITS_REVISION_ID=$(CONFIG_YABITS_REVISION_ID) \
CONFIG_YABITS_MASTER=$(CONFIG_YABITS_MASTER) \
CONFIG_YABITS_STABLE=$(CONFIG_YABITS_STABLE) \
MFLAGS= MAKEFLAGS=
# BOOTBOOT
payloads/external/BOOTBOOT/bootboot/dist/bootbootcb.elf:
$(MAKE) -C payloads/external/BOOTBOOT all
# skiboot
payloads/external/skiboot/build/skiboot.elf:
$(MAKE) -C payloads/external/skiboot all \
CONFIG_SKIBOOT_GIT_REPO=$(CONFIG_SKIBOOT_GIT_REPO) \
CONFIG_SKIBOOT_REVISION=$(CONFIG_SKIBOOT_REVISION)
# COREDOOM
payloads/external/coreDOOM/coredoom/doomgeneric/coredoom.elf coredoom:
$(MAKE) -C payloads/external/coreDOOM
cbfs-files-$(CONFIG_COREDOOM_SECONDARY_PAYLOAD) += img/coreDOOM
img/coreDOOM-file := payloads/external/coreDOOM/coredoom/doomgeneric/coredoom.elf
img/coreDOOM-type := payload
img/coreDOOM-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
# WAD file
ifneq ($(strip $(CONFIG_COREDOOM_WAD_FILE)),)
cbfs-files-y += doom.wad
doom.wad-file := $(strip $(CONFIG_COREDOOM_WAD_FILE))
doom.wad-type := raw
doom.wad-compression := $(CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG)
endif
Reference in a new issue View git blame Copy permalink