Go to file
Furquan Shaikh a39d54edce mb/google/dedede/var/wheelie: Use auto-generated Makefile.inc using gen_part_id.go
This change adds mem_list_variant.txt that contains the list of
memory parts used by wheelie and Makefile.inc generated by
gen_part_id.go using mem_list_variant.txt.

In the final change of the series, all dedede variants will be
switched from using the current SPDs to new auto-generated SPDs.

Differences in auto-generated SPD from current SPD are as follows:
Part: MT53E512M32D2NP-046 WT:E
Byte#    Current     New         Explanation
4        0x15        0x16        This part has only 1 die. Hence,
                                 density per die is 16Gb.
6        0x90        0x04        1 die in package and 2 channels per
                                 die.
9        0x40        0x00        Unused by MRC.
19       0x0F        0xFF        As per JEDEC spec, tckMax should be
                                 100ns. So, value should be 0xFF as
                                 per datasheet.
123      0x00        0xE5        Fine offset for taa. Expected value
                                 is 0xE5 as per datasheet.
125      0xE1        0xE0        Fine offset for tckMin. As per
                                 datasheet tckMin is 0.468ns. So, this
                                 comes out to be 0xE0.
Additionally, manufacturer name bytes are set to 0.

Change-Id: If307bfb1d376e32af08af4f020f9e125f6a415dd
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41879
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-06-06 09:30:22 +00:00
3rdparty 3rdparty/amd_blobs: Update to include APCB_magic.bin 2020-05-27 15:59:45 +00:00
Documentation mb/prodrive/hermes: Add new mainboard port 2020-06-06 07:44:53 +00:00
LICENSES drivers: Use SPDX identifiers 2020-05-25 22:19:21 +00:00
configs mb/dell/optiplex_9010: Add Dell OptiPlex 9010 SFF support 2020-05-16 17:38:46 +00:00
payloads usb/xhci: Fix timeout logic 2020-06-06 09:26:02 +00:00
src mb/google/dedede/var/wheelie: Use auto-generated Makefile.inc using gen_part_id.go 2020-06-06 09:30:22 +00:00
tests tests: Always run all unit tests 2020-05-28 09:48:13 +00:00
util lp4x: Add new memory parts and generate SPDs 2020-06-06 09:29:54 +00:00
.checkpatch.conf
.clang-format lint/clang-format: set to 96 chars per line 2019-06-13 20:14:00 +00:00
.editorconfig
.gitignore cbfstool: Build vboot library 2020-03-23 08:34:23 +00:00
.gitmodules submodules: Add new submodule 3rdparty/cmocka 2020-05-26 16:20:49 +00:00
.gitreview
AUTHORS AUTHORS, util/: Drop individual copyright notices 2020-05-09 21:21:32 +00:00
COPYING
MAINTAINERS MAINTAINERS: Add entry for mb/ocp/tiogapass 2020-05-11 08:34:49 +00:00
Makefile Makefile: Use SPDX identifier 2020-05-23 21:03:17 +00:00
Makefile.inc Makefile: Add missing APCB_EDIT_TOOL variable 2020-05-27 16:00:05 +00:00
README.md README.md: Remove link to deprecated wiki 2019-11-16 20:39:55 +00:00
gnat.adc treewide: Remove "this file is part of" lines 2020-05-11 17:11:40 +00:00
toolchain.inc Remove MAYBE_STATIC_BSS and ENV_STAGE_HAS_BSS_SECTION 2020-05-26 15:04:08 +00:00

README.md

coreboot README

coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.

With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.

coreboot was formerly known as LinuxBIOS.

Payloads

After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.

See https://www.coreboot.org/Payloads for a list of supported payloads.

Supported Hardware

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

Build Requirements

  • make
  • gcc / g++ Because Linux distribution compilers tend to use lots of patches. coreboot does lots of "unusual" things in its build system, some of which break due to those patches, sometimes by gcc aborting, sometimes - and that's worse - by generating broken object code. Two options: use our toolchain (eg. make crosstools-i386) or enable the ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this case).
  • iasl (for targets with ACPI support)
  • pkg-config
  • libssl-dev (openssl)

Optional:

  • doxygen (for generating/viewing documentation)
  • gdb (for better debugging facilities on some targets)
  • ncurses (for make menuconfig and make nconfig)
  • flex and bison (for regenerating parsers)

Building coreboot

Please consult https://www.coreboot.org/Build_HOWTO for details.

Testing coreboot Without Modifying Your Hardware

If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.

Please see https://www.coreboot.org/QEMU for details.

Website and Mailing List

Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:

https://www.coreboot.org

You can contact us directly on the coreboot mailing list:

https://www.coreboot.org/Mailinglist

The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.