a5aac76ac6
A payload may want to run erase operations on SPI NOR flash without re-probing the device to get its properties. This patch passes up three properties of flash to achieve that: - The size of the flash device - The sector size, i.e., the granularity of erase - The command used for erase The patch sends the parameters through coreboot and then libpayload. The patch also includes a minor refactoring of the flash erase code. Parameters are sent up for just one flash device. If multiple SPI flash devices are probed, the second one will "win" and its parameters will be sent up to the payload. TEST=Observed parameters to be passed up to depthcharge through libpayload and be used to correctly initialize flash and do an erase. TEST=Winbond and Gigadevices spi flash drivers compile with the changes; others don't, for seemingly unrelated reasons. BRANCH=none BUG=chromium:446377 Change-Id: Ib8be86494b5a3d1cfe1d23d3492e3b5cba5f99c6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 988c8c68bbfcdfa69d497ea5f806567bc80f8126 Original-Change-Id: Ie2b3a7f5b6e016d212f4f9bac3fabd80daf2ce72 Original-Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/239570 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9726 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
77 lines
2.8 KiB
C
77 lines
2.8 KiB
C
/*
|
|
* SPI flash internal definitions
|
|
*
|
|
* Copyright (C) 2008 Atmel Corporation
|
|
*/
|
|
|
|
#ifndef SPI_FLASH_INTERNAL_H
|
|
#define SPI_FLASH_INTERNAL_H
|
|
|
|
/* Common parameters -- kind of high, but they should only occur when there
|
|
* is a problem (and well your system already is broken), so err on the side
|
|
* of caution in case we're dealing with slower SPI buses and/or processors.
|
|
*/
|
|
#define CONFIG_SYS_HZ 100
|
|
#define SPI_FLASH_PROG_TIMEOUT (2 * CONFIG_SYS_HZ)
|
|
#define SPI_FLASH_PAGE_ERASE_TIMEOUT (5 * CONFIG_SYS_HZ)
|
|
#define SPI_FLASH_SECTOR_ERASE_TIMEOUT (10 * CONFIG_SYS_HZ)
|
|
|
|
/* Common commands */
|
|
#define CMD_READ_ID 0x9f
|
|
|
|
#define CMD_READ_ARRAY_SLOW 0x03
|
|
#define CMD_READ_ARRAY_FAST 0x0b
|
|
#define CMD_READ_ARRAY_LEGACY 0xe8
|
|
|
|
#define CMD_READ_STATUS 0x05
|
|
#define CMD_WRITE_ENABLE 0x06
|
|
|
|
#define CMD_BLOCK_ERASE 0xD8
|
|
|
|
/* Common status */
|
|
#define STATUS_WIP 0x01
|
|
|
|
/* Send a single-byte command to the device and read the response */
|
|
int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len);
|
|
|
|
int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset,
|
|
size_t len, void *data);
|
|
|
|
int spi_flash_cmd_read_slow(struct spi_flash *flash, u32 offset,
|
|
size_t len, void *data);
|
|
|
|
/*
|
|
* Send a multi-byte command to the device followed by (optional)
|
|
* data. Used for programming the flash array, etc.
|
|
*/
|
|
int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
|
|
const void *data, size_t data_len);
|
|
|
|
/* Send a command to the device and wait for some bit to clear itself. */
|
|
int spi_flash_cmd_poll_bit(struct spi_flash *flash, unsigned long timeout,
|
|
u8 cmd, u8 poll_bit);
|
|
|
|
/*
|
|
* Send the read status command to the device and wait for the wip
|
|
* (write-in-progress) bit to clear itself.
|
|
*/
|
|
int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout);
|
|
|
|
/* Erase sectors. */
|
|
int spi_flash_cmd_erase(struct spi_flash *flash, u32 offset, size_t len);
|
|
|
|
/* Manufacturer-specific probe functions */
|
|
struct spi_flash *spi_flash_probe_spansion(struct spi_slave *spi, u8 *idcode);
|
|
struct spi_flash *spi_flash_probe_amic(struct spi_slave *spi, u8 *idcode);
|
|
struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode);
|
|
struct spi_flash *spi_flash_probe_eon(struct spi_slave *spi, u8 *idcode);
|
|
struct spi_flash *spi_flash_probe_macronix(struct spi_slave *spi, u8 *idcode);
|
|
struct spi_flash *spi_flash_probe_sst(struct spi_slave *spi, u8 *idcode);
|
|
struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 *idcode);
|
|
struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode);
|
|
struct spi_flash *spi_flash_probe_gigadevice(struct spi_slave *spi,
|
|
u8 *idcode);
|
|
struct spi_flash *spi_flash_probe_adesto(struct spi_slave *spi, u8 *idcode);
|
|
struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi, u8 *idcode);
|
|
|
|
#endif /* SPI_FLASH_INTERNAL_H */
|