coreboot-kgpe-d16/src/include/cpu/amd/gx2def.h

523 lines
18 KiB
C

#ifndef CPU_AMD_GX2DEF_H
#define CPU_AMD_GX2DEF_H
#define CPU_ID_1_X 0x540 /* Stepping ID 1.x*/
#define CPU_ID_2_0 0x551 /* Stepping ID 2.0*/
#define CPU_ID_2_1 0x552 /* Stepping ID 2.1*/
#define CPU_ID_2_2 0x553 /* Stepping ID 2.2*/
#define CPU_REV_1_0 0x011
#define CPU_REV_1_1 0x012
#define CPU_REV_1_2 0x013
#define CPU_REV_1_3 0x014
#define CPU_REV_2_0 0x020
#define CPU_REV_2_1 0x021
#define CPU_REV_2_2 0x022
#define CPU_REV_3_0 0x030
/* GeodeLink Control Processor Registers, GLIU1, Port 3 ; MSR_GLCP = 4c00xxxx */
#define GLCP_CLK_DIS_DELAY (MSR_GLCP + 0x08)
#define GLCP_PMCLKDISABLE (MSR_GLCP + 0x09)
#define GLCP_DBGOUT (MSR_GLCP + 0x0C)
#define GLCP_PROCSTAT (MSR_GLCP + 0x0D)
#define GLCP_DBGCLKCTL (MSR_GLCP + 0x16)
#define GLCP_CHIP_REVID (MSR_GLCP + 0x17)
#define GLCP_TH_OD (MSR_GLCP + 0x1E)
#define GLCP_FIFOCTL (MSR_GLCP + 0x5E)
/* GLCP_SYS_RSTPLL, Upper 32 bits */
#define GLCP_SYS_RSTPLL_MDIV_SHIFT 9
#define GLCP_SYS_RSTPLL_VDIV_SHIFT 6
#define GLCP_SYS_RSTPLL_FBDIV_SHIFT 0
/* GLCP_SYS_RSTPLL, Lower 32 bits */
#define GLCP_SYS_RSTPLL_SWFLAGS_SHIFT 26
#define GLCP_SYS_RSTPLL_SWFLAGS_MASK (0x3f << 26)
#define GLCP_SYS_RSTPLL_LOCKWAIT 24
#define GLCP_SYS_RSTPLL_HOLDCOUNT 16
#define GLCP_SYS_RSTPLL_BYPASS 15
#define GLCP_SYS_RSTPLL_PD 14
#define GLCP_SYS_RSTPLL_RESETPLL 13
#define GLCP_SYS_RSTPLL_DDRMODE 10
#define GLCP_SYS_RSTPLL_VA_SEMI_SYNC_MODE 9
#define GLCP_SYS_RSTPLL_PCI_SEMI_SYNC_MODE 8
#define GLCP_SYS_RSTPLL_CHIP_RESET 0
/* MSR routing as follows */
/* MSB = 1 means not for CPU */
/* next 3 bits 1st port */
/* next3 bits next port if through an GLIU */
/* etc... */
/* Redcloud as follows. */
/* GLIU0*/
/* port0 - GLIU0 */
/* port1 - MC */
/* port2 - GLIU1 */
/* port3 - CPU */
/* port4 - VG */
/* port5 - GP */
/* port6 - DF */
/* GLIU1*/
/* port1 - GLIU0 */
/* port3 - GLCP */
/* port4 - PCI */
/* port5 - FG */
#define GL0_GLIU0 0
#define GL0_MC 1
#define GL0_GLIU1 2
#define GL0_CPU 3
#define GL0_VG 4
#define GL0_GP 5
#define GL0_DF 6
#define GL1_GLIU0 1
#define GL1_GLCP 3
#define GL1_PCI 4
#define GL1_FG 5
#define MSR_GLIU0 (GL0_GLIU0 << 29) + (1 << 28) /* 1000xxxx - To get on GeodeLink one bit has to be set */
#define MSR_MC (GL0_MC << 29) /* 2000xxxx */
#define MSR_GLIU1 (GL0_GLIU1 << 29) /* 4000xxxx */
#define MSR_CPU (GL0_CPU << 29) /* 6000xxxx - this is not used for BIOS since code executing on CPU doesn't need to be routed */
#define MSR_VG (GL0_VG << 29) /* 8000xxxx */
#define MSR_GP (GL0_GP << 29) /* A000xxxx */
#define MSR_DF (GL0_DF << 29) /* C000xxxx */
#define MSR_GLCP (GL1_GLCP << 26) + MSR_GLIU1 /* 4C00xxxx */
#define MSR_PCI (GL1_PCI << 26) + MSR_GLIU1 /* 5000xxxx */
#define MSR_FG (GL1_FG << 26) + MSR_GLIU1 /* 5400xxxx */
/* GeodeLink Interface Unit 0 (GLIU0) port0 */
#define GLIU0_GLD_MSR_CAP (MSR_GLIU0 + 0x2000)
#define GLIU0_GLD_MSR_PM (MSR_GLIU0 + 0x2004)
#define GLIU0_DESC_BASE (MSR_GLIU0 + 0x20)
#define GLIU0_CAP (MSR_GLIU0 + 0x86)
#define GLIU0_GLD_MSR_COH (MSR_GLIU0 + 0x80)
/* Memory Controller GLIU0 port 1 */
#define MC_GLD_MSR_CAP (MSR_MC + 0x2000)
#define MC_GLD_MSR_PM (MSR_MC + 0x2004)
#define MC_CF07_DATA (MSR_MC + 0x18)
#define CF07_UPPER_D1_SZ_SHIFT 28
#define CF07_UPPER_D1_MB_SHIFT 24
#define CF07_UPPER_D1_CB_SHIFT 20
#define CF07_UPPER_D1_PSZ_SHIFT 16
#define CF07_UPPER_D0_SZ_SHIFT 12
#define CF07_UPPER_D0_MB_SHIFT 8
#define CF07_UPPER_D0_CB_SHIFT 4
#define CF07_UPPER_D0_PSZ_SHIFT 0
#define CF07_LOWER_REF_INT_SHIFT 8
#define CF07_LOWER_LOAD_MODE_DDR_SET (1 << 28)
#define CF07_LOWER_LOAD_MODE_DLL_RESET (1 << 27)
#define CF07_LOWER_EMR_QFC_SET (1 << 26)
#define CF07_LOWER_EMR_DRV_SET (1 << 25)
#define CF07_LOWER_REF_TEST_SET (1 << 3)
#define CF07_LOWER_PROG_DRAM_SET (1 << 0)
#define MC_CF8F_DATA (MSR_MC + 0x19)
#define CF8F_UPPER_XOR_BS_SHIFT 19
#define CF8F_UPPER_XOR_MB0_SHIFT 18
#define CF8F_UPPER_XOR_BA1_SHIFT 17
#define CF8F_UPPER_XOR_BA0_SHIFT 16
#define CF8F_UPPER_REORDER_DIS_SET (1 << 8)
#define CF8F_UPPER_REG_DIMM_SHIFT 4
#define CF8F_LOWER_CAS_LAT_SHIFT 28
#define CF8F_LOWER_REF2ACT_SHIFT 24
#define CF8F_LOWER_ACT2PRE_SHIFT 20
#define CF8F_LOWER_PRE2ACT_SHIFT 16
#define CF8F_LOWER_ACT2CMD_SHIFT 12
#define CF8F_LOWER_ACT2ACT_SHIFT 8
#define CF8F_UPPER_32BIT_SET (1 << 5)
#define CF8F_UPPER_HOI_LOI_SET (1 << 1)
#define MC_CF1017_DATA (MSR_MC + 0x1A)
#define CF1017_LOWER_PM1_UP_DLY_SET (1 << 8)
#define CF1017_LOWER_WR2DAT_SHIFT 0
#define MC_CFCLK_DBUG (MSR_MC + 0x1D)
#define CFCLK_UPPER_MTST_B2B_DIS_SET (1 << 2)
#define CFCLK_UPPER_MTST_DQS_EN_SET (1 << 1)
#define CFCLK_UPPER_MTEST_EN_SET (1 << 0)
#define CFCLK_LOWER_MASK_CKE_SET1 (1 << 9)
#define CFCLK_LOWER_MASK_CKE_SET0 (1 << 8)
#define CFCLK_LOWER_SDCLK_SET (0x0F << 0)
#define MC_CF_RDSYNC (MSR_MC + 0x1F)
/* GLIU1 GLIU0 port2 */
#define GLIU1_GLD_MSR_CAP (MSR_GLIU1 + 0x2000)
#define GLIU1_GLD_MSR_PM (MSR_GLIU1 + 0x2004)
#define GLIU1_GLD_MSR_COH (MSR_GLIU1 + 0x80)
/* CPU ; does not need routing instructions since we are executing there. */
#define CPU_GLD_MSR_CAP 0x2000
#define CPU_GLD_MSR_CONFIG 0x2001
#define CPU_GLD_MSR_PM 0x2004
#define CPU_GLD_MSR_DIAG 0x2005
#define DIAG_SEL1_MODE_SHIFT 16
#define DIAG_SEL1_SET (1 << 31)
#define DIAG_SEL0__MODE_SHIFT 0
#define DIAG_SET0_SET (1 << 15)
#define CPU_PF_BTB_CONF 0x1100
#define BTB_ENABLE_SET (1 << 0)
#define RETURN_STACK_ENABLE_SET (1 << 4)
#define CPU_PF_BTBRMA_BIST 0x110C
#define CPU_XC_CONFIG 0x1210
#define XC_CONFIG_SUSP_ON_HLT (1 << 0)
#define CPU_ID_CONFIG 0x1250
#define ID_CONFIG_SERIAL_SET (1 << 0)
#define CPU_AC_MSR 0x1301
#define CPU_EX_BIST 0x1428
/* IM */
#define CPU_IM_CONFIG 0x1700
#define IM_CONFIG_LOWER_ICD_SET (1 << 8)
#define IM_CONFIG_LOWER_QWT_SET (1 << 20)
#define CPU_IC_INDEX 0x1710
#define CPU_IC_DATA 0x1711
#define CPU_IC_TAG 0x1712
#define CPU_IC_TAG_I 0x1713
#define CPU_ITB_INDEX 0x1720
#define CPU_ITB_LRU 0x1721
#define CPU_ITB_ENTRY 0x1722
#define CPU_ITB_ENTRY_I 0x1723
#define CPU_IM_BIST_TAG 0x1730
#define CPU_IM_BIST_DATA 0x1731
/* various CPU MSRs */
#define CPU_DM_CONFIG0 0x1800
#define DM_CONFIG0_UPPER_WSREQ_SHIFT 12
#define DM_CONFIG0_LOWER_DCDIS_SET (1<<8)
#define DM_CONFIG0_LOWER_WBINVD_SET (1<<5)
#define DM_CONFIG0_LOWER_MISSER_SET (1<<1)
/* configuration MSRs */
#define CPU_RCONF_DEFAULT 0x1808
#define RCONF_DEFAULT_UPPER_ROMRC_SHIFT 24
#define RCONF_DEFAULT_UPPER_ROMBASE_SHIFT 4
#define RCONF_DEFAULT_UPPER_DEVRC_HI_SHIFT 0
#define RCONF_DEFAULT_LOWER_DEVRC_LOW_SHIFT 28
#define RCONF_DEFAULT_LOWER_SYSTOP_SHIFT 8
#define RCONF_DEFAULT_LOWER_SYSRC_SHIFT 0
#define CPU_RCONF_BYPASS 0x180A
#define CPU_RCONF_A0_BF 0x180B
#define CPU_RCONF_C0_DF 0x180C
#define CPU_RCONF_E0_FF 0x180D
#define CPU_RCONF_SMM 0x180E
#define RCONF_SMM_UPPER_SMMTOP_SHIFT 12
#define RCONF_SMM_UPPER_RCSMM_SHIFT 0
#define RCONF_SMM_LOWER_SMMBASE_SHIFT 12
#define RCONF_SMM_LOWER_RCNORM_SHIFT 0
#define RCONF_SMM_LOWER_EN_SET (1<<8)
#define CPU_RCONF_DMM 0x180F
#define RCONF_DMM_UPPER_DMMTOP_SHIFT 12
#define RCONF_DMM_UPPER_RCDMM_SHIFT 0
#define RCONF_DMM_LOWER_DMMBASE_SHIFT 12
#define RCONF_DMM_LOWER_RCNORM_SHIFT 0
#define RCONF_DMM_LOWER_EN_SET (1<<8)
#define CPU_RCONF0 0x1810
#define CPU_RCONF1 0x1811
#define CPU_RCONF2 0x1812
#define CPU_RCONF3 0x1813
#define CPU_RCONF4 0x1814
#define CPU_RCONF5 0x1815
#define CPU_RCONF6 0x1816
#define CPU_RCONF7 0x1817
#define CPU_CR1_MSR 0x1881
#define CPU_CR2_MSR 0x1882
#define CPU_CR3_MSR 0x1883
#define CPU_CR4_MSR 0x1884
#define CPU_DC_INDEX 0x1890
#define CPU_DC_DATA 0x1891
#define CPU_DC_TAG 0x1892
#define CPU_DC_TAG_I 0x1893
#define CPU_SNOOP 0x1894
#define CPU_DTB_INDEX 0x1898
#define CPU_DTB_LRU 0x1899
#define CPU_DTB_ENTRY 0x189A
#define CPU_DTB_ENTRY_I 0x189B
#define CPU_L2TB_INDEX 0x189C
#define CPU_L2TB_LRU 0x189D
#define CPU_L2TB_ENTRY 0x189E
#define CPU_L2TB_ENTRY_I 0x189F
#define CPU_DM_BIST 0x18C0
/* SMM */
#define CPU_AC_SMM_CTL 0x1301
#define SMM_NMI_EN_SET (1<<0)
#define SMM_SUSP_EN_SET (1<<1)
#define NEST_SMI_EN_SET (1<<2)
#define SMM_INST_EN_SET (1<<3)
#define INTL_SMI_EN_SET (1<<4)
#define EXTL_SMI_EN_SET (1<<5)
#define CPU_FPU_MSR_MODE 0x1A00
#define FPU_IE_SET (1<<0)
#define CPU_FP_UROM_BIST 0x1A03
#define CPU_BC_CONF_0 0x1900
#define TSC_SUSP_SET (1<<5)
#define SUSP_EN_SET (1<<12)
/* VG GLIU0 port4 */
#define VG_GLD_MSR_CAP (MSR_VG + 0x2000)
#define VG_GLD_MSR_CONFIG (MSR_VG + 0x2001)
#define VG_GLD_MSR_PM (MSR_VG + 0x2004)
#define GP_GLD_MSR_CAP (MSR_GP + 0x2000)
#define GP_GLD_MSR_CONFIG (MSR_GP + 0x2001)
#define GP_GLD_MSR_PM (MSR_GP + 0x2004)
/* DF GLIU0 port6 */
#define DF_GLD_MSR_CAP (MSR_DF + 0x2000)
#define DF_GLD_MSR_MASTER_CONF (MSR_DF + 0x2001)
#define DF_LOWER_LCD_SHIFT 6
#define DF_GLD_MSR_PM (MSR_DF + 0x2004)
/* GeodeLink Control Processor GLIU1 port3 */
#define GLCP_GLD_MSR_CAP (MSR_GLCP + 0x2000)
#define GLCP_GLD_MSR_CONF (MSR_GLCP + 0x2001)
#define GLCP_GLD_MSR_PM (MSR_GLCP + 0x2004)
#define GLCP_DELAY_CONTROLS (MSR_GLCP + 0x0F)
#define GLCP_SYS_RSTPLL (MSR_GLCP +0x14 /* R/W */)
#define RSTPLL_UPPER_MDIV_SHIFT 9
#define RSTPLL_UPPER_VDIV_SHIFT 6
#define RSTPLL_UPPER_FBDIV_SHIFT 0
#define RSTPLL_LOWER_SWFLAGS_SHIFT 26
#define RSTPLL_LOWER_SWFLAGS_MASK (0x3F<<RSTPLL_LOWER_SWFLAGS_SHIFT)
#define RSTPPL_LOWER_HOLD_COUNT_SHIFT 16
#define RSTPPL_LOWER_BYPASS_SHIFT 15
#define RSTPPL_LOWER_TST_SHIFT 11
#define RSTPPL_LOWER_SDRMODE_SHIFT 10
#define RSTPPL_LOWER_BOOTSTRAP_SHIFT 4
#define RSTPPL_LOWER_LOCK_SET (1<<25)
#define RSTPPL_LOWER_LOCKWAIT_SET (1<<24)
#define RSTPPL_LOWER_BYPASS_SET (1<<15)
#define RSTPPL_LOWER_PD_SET (1<<14)
#define RSTPPL_LOWER_PLL_RESET_SET (1<<13)
#define RSTPPL_LOWER_SDRMODE_SET (1<<10)
#define RSTPPL_LOWER_CPU_SEMI_SYNC_SET (1<<9)
#define RSTPPL_LOWER_PCI_SEMI_SYNC_SET (1<<8)
#define RSTPPL_LOWER_CHIP_RESET_SET (1<<0)
#define GLCP_DOTPLL (MSR_GLCP + 0x15 /* R/W */)
#define DOTPPL_LOWER_PD_SET (1<<14)
/* GLIU1 port 4 */
#define GLPCI_GLD_MSR_CAP (MSR_PCI + 0x2000)
#define GLPCI_GLD_MSR_CONFIG (MSR_PCI + 0x2001)
#define GLPCI_GLD_MSR_PM (MSR_PCI + 0x2004)
#define GLPCI_CTRL (MSR_PCI + 0x2010)
#define GLPCI_CTRL_UPPER_FTH_SHIFT 28
#define GLPCI_CTRL_UPPER_RTH_SHIFT 24
#define GLPCI_CTRL_UPPER_SBRTH_SHIFT 20
#define GLPCI_CTRL_UPPER_DTL_SHIFT 14
#define GLPCI_CTRL_UPPER_WTO_SHIFT 11
#define GLPCI_CTRL_UPPER_LAT_SHIFT 3
#define GLPCI_CTRL_UPPER_ILTO_SHIFT 8
#define GLPCI_CTRL_LOWER_IRFT_SHIFT 18
#define GLPCI_CTRL_LOWER_IRFC_SHIFT 16
#define GLPCI_CTRL_LOWER_ER_SET (1<<11)
#define GLPCI_CTRL_LOWER_LDE_SET (1<<9)
#define GLPCI_CTRL_LOWER_OWC_SET (1<<4)
#define GLPCI_CTRL_LOWER_IWC_SET (1<<3)
#define GLPCI_CTRL_LOWER_PCD_SET (1<<2)
#define GLPCI_CTRL_LOWER_ME_SET (1<<0)
#define GLPCI_ARB (MSR_PCI + 0x2011)
#define GLPCI_ARB_UPPER_BM1_SET (1<<17)
#define GLPCI_ARB_UPPER_BM0_SET (1<<16)
#define GLPCI_ARB_UPPER_CPRE_SET (1<<15)
#define GLPCI_ARB_UPPER_PRE2_SET (1<<10)
#define GLPCI_ARB_UPPER_PRE1_SET (1<<9)
#define GLPCI_ARB_UPPER_PRE0_SET (1<<8)
#define GLPCI_ARB_UPPER_CRME_SET (1<<7)
#define GLPCI_ARB_UPPER_RME2_SET (1<<2)
#define GLPCI_ARB_UPPER_RME1_SET (1<<1)
#define GLPCI_ARB_UPPER_RME0_SET (1<<0)
#define GLPCI_ARB_LOWER_PRCM_SHIFT 24
#define GLPCI_ARB_LOWER_FPVEC_SHIFT 16
#define GLPCI_ARB_LOWER_RMT_SHIFT 6
#define GLPCI_ARB_LOWER_IIE_SET (1<<8)
#define GLPCI_ARB_LOWER_PARK_SET (1<<0)
#define GLPCI_REN (MSR_PCI + 0x2014)
#define GLPCI_A0_BF (MSR_PCI + 0x2015)
#define GLPCI_C0_DF (MSR_PCI + 0x2016)
#define GLPCI_E0_FF (MSR_PCI + 0x2017)
#define GLPCI_RC0 (MSR_PCI + 0x2018)
#define GLPCI_RC1 (MSR_PCI + 0x2019)
#define GLPCI_RC2 (MSR_PCI + 0x201A)
#define GLPCI_RC3 (MSR_PCI + 0x201B)
#define GLPCI_RC4 (MSR_PCI + 0x201C)
#define GLPCI_RC_UPPER_TOP_SHIFT 12
#define GLPCI_RC_LOWER_BASE_SHIFT 12
#define GLPCI_RC_LOWER_EN_SET (1<<8)
#define GLPCI_RC_LOWER_PF_SET (1<<5)
#define GLPCI_RC_LOWER_WC_SET (1<<4)
#define GLPCI_RC_LOWER_WP_SET (1<<2)
#define GLPCI_RC_LOWER_CD_SET (1<<0)
#define GLPCI_ExtMSR (MSR_PCI + 0x201E)
#define GLPCI_SPARE (MSR_PCI + 0x201F)
#define GLPCI_SPARE_LOWER_AILTO_SET (1<<6)
#define GLPCI_SPARE_LOWER_PPD_SET (1<<5)
#define GLPCI_SPARE_LOWER_PPC_SET (1<<4)
#define GLPCI_SPARE_LOWER_MPC_SET (1<<3)
#define GLPCI_SPARE_LOWER_MME_SET (1<<2)
#define GLPCI_SPARE_LOWER_NSE_SET (1<<1)
#define GLPCI_SPARE_LOWER_SUPO_SET (1<<0)
/* FooGlue GLIU1 port 5 */
#define FG_GLD_MSR_CAP (MSR_FG + 0x2000)
#define FG_GLD_MSR_CONFIG (MSR_FG + 0x2001)
#define FG_GLD_MSR_PM (MSR_FG + 0x2004)
#define FG_GIO_MSR_SEL (MSR_FG + 0x2010)
#define FG_BIST (MSR_FG + 0x2005)
/* from MC spec */
#define MIN_MOD_BANKS 1
#define MAX_MOD_BANKS 2
#define MIN_DEV_BANKS 2
#define MAX_DEV_BANKS 4
#define MAX_COL_ADDR 17
/* more fun stuff */
#define BM 1 /* Base Mask - map power of 2 size aligned region */
#define BMO 2 /* BM with an offset */
#define R 3 /* Range - 4k range minimum */
#define RO 4 /* R with offset */
#define SC 5 /* Swiss 0xCeese - maps a 256K region in to 16K 0xcunks. Set W/R */
#define BMIO 6 /* Base Mask IO */
#define SCIO 7 /* Swiss 0xCeese IO */
#define SC_SHADOW 8 /* Special marker for Shadow SC descriptors so setShadow proc is independent of CPU */
#define R_SYSMEM 9 /* Special marker for SYSMEM R descriptors so GLIUInit proc is independent of CPU */
#define BMO_SMM 10 /* Special marker for SMM */
#define BM_SMM 11 /* Special marker for SMM */
#define BMO_DMM 12 /* Special marker for DMM */
#define BM_DMM 13 /* Special marker for DMM */
#define RO_FB 14 /* special for Frame buffer. */
#define R_FB 15 /* special for FB. */
#define OTHER 0x0FE /* Special marker for other */
#define GL_END 0x0FF /* end */
#define MSR_GL0 (GL1_GLIU0 << 29)
/* Set up desc addresses from 20 - E8 */
/* This is chip specific! */
//remove after MSRINIT is gone
#define MSR_GLIU0_BASE1 (MSR_GLIU0 + 0x20) /* BM */
#define MSR_GLIU0_BASE2 (MSR_GLIU0 + 0x21) /* BM */
#define MSR_GLIU0_SHADOW (MSR_GLIU0 + 0x2C) /* SCO should only be SC */
#define MSR_GLIU0_SYSMEM (MSR_GLIU0 + 0x28) /* RO should only be R */
#define MSR_GLIU1_BASE1 (MSR_GLIU1 + 0x20) /* BM */
#define MSR_GLIU1_BASE2 (MSR_GLIU1 + 0x21) /* BM */
#define MSR_GLIU1_SHADOW (MSR_GLIU1 + 0x2D) /* SCO should only be SC */
#define MSR_GLIU1_SYSMEM (MSR_GLIU1 + 0x29) /* RO should only be R */
#define GLIU0_P2D_BM_0 (MSR_GLIU0 + 0x20) /* BASE1 */
#define GLIU0_P2D_BM_1 (MSR_GLIU0 + 0x21) /* BASE2 */
#define GLIU0_P2D_BM_2 (MSR_GLIU0 + 0x22)
#define GLIU0_P2D_BM_3 (MSR_GLIU0 + 0x23)
#define GLIU0_P2D_BM_4 (MSR_GLIU0 + 0x24)
#define GLIU0_P2D_BM_5 (MSR_GLIU0 + 0x25)
#define GLIU0_P2D_BMO_0 (MSR_GLIU0 + 0x26) /* SMM */
#define GLIU0_P2D_BMO_1 (MSR_GLIU0 + 0x27) /* DMM */
#define GLIU0_P2D_R_0 (MSR_GLIU0 + 0x28) /* SYSMEM */
#define GLIU0_P2D_RO_0 (MSR_GLIU0 + 0x29)
#define GLIU0_P2D_RO_1 (MSR_GLIU0 + 0x2A)
#define GLIU0_P2D_RO_2 (MSR_GLIU0 + 0x2B)
#define GLIU0_P2D_SC_0 (MSR_GLIU0 + 0x2C) /* SHADOW */
#define GLIU0_IOD_BM_0 (MSR_GLIU0 + 0xE0)
#define GLIU0_IOD_BM_1 (MSR_GLIU0 + 0xE1)
#define GLIU0_IOD_BM_2 (MSR_GLIU0 + 0xE2)
#define GLIU0_IOD_SC_0 (MSR_GLIU0 + 0xE3)
#define GLIU0_IOD_SC_1 (MSR_GLIU0 + 0xE4)
#define GLIU0_IOD_SC_2 (MSR_GLIU0 + 0xE5)
#define GLIU0_IOD_SC_3 (MSR_GLIU0 + 0xE6)
#define GLIU0_IOD_SC_4 (MSR_GLIU0 + 0xE7)
#define GLIU0_IOD_SC_5 (MSR_GLIU0 + 0xE8)
#define GLIU1_P2D_BM_0 (MSR_GLIU1 + 0x20) /* BASE1 */
#define GLIU1_P2D_BM_1 (MSR_GLIU1 + 0x21) /* BASE2 */
#define GLIU1_P2D_BM_2 (MSR_GLIU1 + 0x22)
#define GLIU1_P2D_BM_3 (MSR_GLIU1 + 0x23) /* SMM */
#define GLIU1_P2D_BM_4 (MSR_GLIU1 + 0x24) /* DMM */
#define GLIU1_P2D_BM_5 (MSR_GLIU1 + 0x25)
#define GLIU1_P2D_BM_6 (MSR_GLIU1 + 0x26)
#define GLIU1_P2D_BM_7 (MSR_GLIU1 + 0x27)
#define GLIU1_P2D_BM_8 (MSR_GLIU1 + 0x28)
#define GLIU1_P2D_R_0 (MSR_GLIU1 + 0x29) /* SYSMEM */
#define GLIU1_P2D_R_1 (MSR_GLIU1 + 0x2A)
#define GLIU1_P2D_R_2 (MSR_GLIU1 + 0x2B)
#define GLIU1_P2D_R_3 (MSR_GLIU1 + 0x2C)
#define GLIU1_P2D_SC_0 (MSR_GLIU1 + 0x2D) /* SHADOW */
#define GLIU1_IOD_BM_0 (MSR_GLIU1 + 0xE0)
#define GLIU1_IOD_BM_1 (MSR_GLIU1 + 0xE1)
#define GLIU1_IOD_BM_2 (MSR_GLIU1 + 0xE2)
#define GLIU1_IOD_SC_0 (MSR_GLIU1 + 0xE3) /* FooGlue F0 for FPU */
#define GLIU1_IOD_SC_1 (MSR_GLIU1 + 0xE4)
#define GLIU1_IOD_SC_2 (MSR_GLIU1 + 0xE5)
#define GLIU1_IOD_SC_3 (MSR_GLIU1 + 0xE6)
#define GLIU1_IOD_SC_4 (MSR_GLIU1 + 0xE7)
#define GLIU1_IOD_SC_5 (MSR_GLIU1 + 0xE8)
/* definitions that are "once you are mostly up, start VSA" type things */
#define SMM_OFFSET 0x40400000
#define SMM_SIZE 128 /* changed SMM_SIZE from 256 KB to 128 KB */
#define DMM_OFFSET 0x0C0000000
#define DMM_SIZE 128
#define FB_OFFSET 0x41000000
#define PCI_MEM_TOP 0x0EFFFFFFF /* Top of PCI mem allocation region */
#define PCI_IO_TOP 0x0EFFF /* Top of PCI I/O allocation region */
#define END_OPTIONROM_SPACE 0x0DFFF /* E0000 is reserved for SystemROMs */
#define MDD_SMBUS 0x06000 /* SMBUS IO location */
#define MDD_GPIO 0x06100 /* GPIO & ICF IO location */
#define MDD_MFGPT 0x06200 /* General Purpose Timers IO location */
#define MDD_IRQ_MAPPER 0x06300 /* IRQ Mapper */
#define ACPI_BASE 0x09C00 /* ACPI Base */
#define MDD_PM 0x09D00 /* Power Management Logic - placed at the end of ACPI */
#define CS5535_IDSEL 0x02000000 /* IDSEL = AD25, device #15 */
#define CHIPSET_DEV_NUM 15
#define IDSEL_BASE 11 /* bit 11 = device 1 */
/* SB LBAR IO + MEMORY MAP */
#define SMBUS_BASE (0x6000)
#define GPIO_BASE (0x6100)
#define MFGPT_BASE (0x6200)
#define IRQMAP_BASE (0x6300)
#define PMLogic_BASE (0x9D00)
#if !defined(__ASSEMBLER__)
#if defined(__PRE_RAM__)
void cpuRegInit(void);
void SystemPreInit(void);
#endif
void cpubug(void);
#endif
#endif /* CPU_AMD_GX2DEF_H */