coreboot-kgpe-d16/util/x86emu/x86_interrupts.c

242 lines
5.7 KiB
C

/*
* This file is part of the coreboot project.
*
* Copyright (C) 2001 Ronald G. Minnich
* Copyright (C) 2005 Nick.Barker9@btinternet.com
* Copyright (C) 2007-2009 coresystems GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include <string.h>
#ifdef CONFIG_COREBOOT_V2
#include <console/console.h>
#include <arch/io.h>
#include <arch/registers.h>
#define printk(x...) do_printk(x)
#else
#include <console.h>
#include <io.h>
#endif
enum {
CHECK = 0xb001,
FINDDEV = 0xb102,
READCONFBYTE = 0xb108,
READCONFWORD = 0xb109,
READCONFDWORD = 0xb10a,
WRITECONFBYTE = 0xb10b,
WRITECONFWORD = 0xb10c,
WRITECONFDWORD = 0xb10d
};
// errors go in AH. Just set these up so that word assigns
// will work. KISS.
enum {
PCIBIOS_NODEV = 0x8600,
PCIBIOS_BADREG = 0x8700
};
int int12_handler(struct eregs *regs);
int int1a_handler(struct eregs *regs);
int int15_handler(struct eregs *regs);
int int12_handler(struct eregs *regs)
{
regs->eax = 64 * 1024;
return 0;
}
int int1a_handler(struct eregs *regs)
{
unsigned short func = (unsigned short) regs->eax;
int retval = 0;
unsigned short devid, vendorid, devfn;
/* Use short to get rid of gabage in upper half of 32-bit register */
short devindex;
unsigned char bus;
struct device *dev;
switch(func) {
case CHECK:
regs->edx = 0x4350;
regs->ecx = 0x2049;
retval = 0;
break;
case FINDDEV:
{
devid = regs->ecx;
vendorid = regs->edx;
devindex = regs->esi;
dev = 0;
#ifdef CONFIG_COREBOOT_V2
while ((dev = dev_find_device(vendorid, devid, dev))) {
#else
while ((dev = dev_find_pci_device(vendorid, devid, dev))) {
#endif
if (devindex <= 0)
break;
devindex--;
}
if (dev) {
unsigned short busdevfn;
regs->eax = 0;
// busnum is an unsigned char;
// devfn is an int, so we mask it off.
busdevfn = (dev->bus->secondary << 8)
| (dev->path.pci.devfn & 0xff);
printk(BIOS_DEBUG, "0x%x: return 0x%x\n", func, busdevfn);
regs->ebx = busdevfn;
retval = 0;
} else {
regs->eax = PCIBIOS_NODEV;
retval = -1;
}
}
break;
case READCONFDWORD:
case READCONFWORD:
case READCONFBYTE:
case WRITECONFDWORD:
case WRITECONFWORD:
case WRITECONFBYTE:
{
unsigned long dword;
unsigned short word;
unsigned char byte;
unsigned char reg;
devfn = regs->ebx & 0xff;
bus = regs->ebx >> 8;
reg = regs->edi;
dev = dev_find_slot(bus, devfn);
if (! dev) {
printk(BIOS_DEBUG, "0x%x: BAD DEVICE bus %d devfn 0x%x\n", func, bus, devfn);
// idiots. the pcibios guys assumed you'd never pass a bad bus/devfn!
regs->eax = PCIBIOS_BADREG;
retval = -1;
}
switch(func) {
case READCONFBYTE:
byte = pci_read_config8(dev, reg);
regs->ecx = byte;
break;
case READCONFWORD:
word = pci_read_config16(dev, reg);
regs->ecx = word;
break;
case READCONFDWORD:
dword = pci_read_config32(dev, reg);
regs->ecx = dword;
break;
case WRITECONFBYTE:
byte = regs->ecx;
pci_write_config8(dev, reg, byte);
break;
case WRITECONFWORD:
word = regs->ecx;
pci_write_config16(dev, reg, word);
break;
case WRITECONFDWORD:
dword = regs->ecx;
pci_write_config32(dev, reg, dword);
break;
}
if (retval)
retval = PCIBIOS_BADREG;
printk(BIOS_DEBUG, "0x%x: bus %d devfn 0x%x reg 0x%x val 0x%x\n",
func, bus, devfn, reg, regs->ecx);
regs->eax = 0;
retval = 0;
}
break;
default:
printk(BIOS_ERR, "UNSUPPORTED PCIBIOS FUNCTION 0x%x\n", func);
break;
}
return retval;
}
int int15_handler(struct eregs *regs)
{
int res = -1;
/* This int15 handler is VIA Tech. specific. Other chipsets need other
* handlers. The right way to do this is to move this handler code into
* the mainboard or northbridge code.
*/
switch (regs->eax & 0xffff) {
case 0x5f19:
break;
case 0x5f18:
regs->eax = 0x5f;
// MCLK = 133, 32M frame buffer, 256 M main memory
regs->ebx = 0x545;
regs->ecx = 0x060;
res = 0;
break;
case 0x5f00:
regs->eax = 0x8600;
break;
case 0x5f01:
regs->eax = 0x5f;
regs->ecx = (regs->ecx & 0xffffff00 ) | 2; // panel type = 2 = 1024 * 768
res = 0;
break;
case 0x5f02:
regs->eax = 0x5f;
regs->ebx = (regs->ebx & 0xffff0000) | 2;
regs->ecx = (regs->ecx & 0xffff0000) | 0x401; // PAL + crt only
regs->edx = (regs->edx & 0xffff0000) | 0; // TV Layout - default
res = 0;
break;
case 0x5f0f:
regs->eax = 0x860f;
break;
/* And now Intel IGD code */
#define BOOT_DISPLAY_DEFAULT 0
#define BOOT_DISPLAY_CRT (1 << 0)
#define BOOT_DISPLAY_TV (1 << 1)
#define BOOT_DISPLAY_EFP (1 << 2)
#define BOOT_DISPLAY_LCD (1 << 3)
#define BOOT_DISPLAY_CRT2 (1 << 4)
#define BOOT_DISPLAY_TV2 (1 << 5)
#define BOOT_DISPLAY_EFP2 (1 << 6)
#define BOOT_DISPLAY_LCD2 (1 << 7)
case 0x5f35:
regs->eax = 0x5f;
regs->ecx = BOOT_DISPLAY_DEFAULT;
res = 0;
break;
case 0x5f40:
regs->eax = 0x5f;
regs->ecx = 3; // This is mainboard specific
printk(BIOS_DEBUG, "DISPLAY=%x\n", regs->ecx);
res = 0;
break;
default:
printk(BIOS_DEBUG, "Unknown INT15 function %04x!\n",
regs->eax & 0xffff);
}
return res;
}