Go to file
Duncan Laurie b2e610011c mb/google/sarien: Fix recovery mode detection
In order to support the physical recovery GPIO on sarien it needs
to enable the option VBOOT_PHYSICAL_REC_SWITCH and set the GPIO
number in the coreboot table appropriately so that depthcharge can
correctly determine the GPIO number.  The same is done for the
write protect GPIO in this table.

Additionally since we are reading a recovery request from H1 it
needs to cache the result since H1 will only return true on the
first request.  All subsequent queries to H1 will not indicate
recovery.  Add a CAR global here to keep track of the state and
only read it from H1 the first time.

BUG=b:121380403
TEST=test_that DUT firmware_DevMode

Change-Id: Ia816a2e285d3c2c3769b25fc5d20147abbc71421
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/31043
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-24 13:55:21 +00:00
3rdparty Update vboot submodule to upstream master 2019-01-16 06:27:49 +00:00
Documentation mb/lenovo/x220: Add x1 as a variant 2019-01-17 17:09:53 +00:00
configs soc/intel/apollolake: Add reset code to postcar stage 2018-10-23 07:11:31 +00:00
payloads Kconfig: Remove symbol names for choices 2019-01-24 13:41:31 +00:00
src mb/google/sarien: Fix recovery mode detection 2019-01-24 13:55:21 +00:00
util util/lint: update non-ascii linter checking rules 2019-01-24 13:51:51 +00:00
.checkpatch.conf .checkpatch.conf: Ignore a few more warnings 2018-08-13 12:23:24 +00:00
.clang-format clang-format: change it to better match our style 2018-07-31 23:25:29 +00:00
.gitignore util/bucts: Add tool to manipulate BUC.TS bit on Intel targets 2018-11-19 08:19:16 +00:00
.gitmodules submodules: add FSP mirror as non-default submodule 2018-09-02 03:07:50 +00:00
.gitreview
COPYING
MAINTAINERS MAINTAINERS: Tag denverton-ns as Odd Fixes 2019-01-09 10:00:46 +00:00
Makefile util/kconfig: Add `toada` Ada spec generation tool 2019-01-24 13:47:08 +00:00
Makefile.inc buildsystem: Promote rules.h to default include 2019-01-16 11:51:07 +00:00
README.md README: Convert to Markdown 2018-09-16 13:01:58 +00:00
gnat.adc
toolchain.inc arch/power8: Rename to ppc64 2018-11-30 20:02:17 +00:00

README.md

coreboot README

coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.

With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.

coreboot was formerly known as LinuxBIOS.

Payloads

After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.

See https://www.coreboot.org/Payloads for a list of supported payloads.

Supported Hardware

coreboot supports a wide range of chipsets, devices, and mainboards.

For details please consult:

Build Requirements

  • make
  • gcc / g++ Because Linux distribution compilers tend to use lots of patches. coreboot does lots of "unusual" things in its build system, some of which break due to those patches, sometimes by gcc aborting, sometimes - and that's worse - by generating broken object code. Two options: use our toolchain (eg. make crosstools-i386) or enable the ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this case).
  • iasl (for targets with ACPI support)
  • pkg-config
  • libssl-dev (openssl)

Optional:

  • doxygen (for generating/viewing documentation)
  • gdb (for better debugging facilities on some targets)
  • ncurses (for make menuconfig and make nconfig)
  • flex and bison (for regenerating parsers)

Building coreboot

Please consult https://www.coreboot.org/Build_HOWTO for details.

Testing coreboot Without Modifying Your Hardware

If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.

Please see https://www.coreboot.org/QEMU for details.

Website and Mailing List

Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:

https://www.coreboot.org

You can contact us directly on the coreboot mailing list:

https://www.coreboot.org/Mailinglist

The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.

coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.

This makes the resulting coreboot images licensed under the GPL, version 2.